diff mbox series

[V4,03/13] dt-bindings: rcar-gen3-phy-usb2: Add r8a77470 support

Message ID 1554883715-41725-4-git-send-email-biju.das@bp.renesas.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series Add USB2.0 support | expand

Commit Message

Biju Das April 10, 2019, 8:08 a.m. UTC 
Document RZ/G1C (R8A77470) SoC bindings.

For RZ/G1C, this driver is used to enable interrupt generation and
initializing timing registers which is part of phy_init code.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
V3-->V4
  * No Change
V2-->V3
  * New patch
    https://patchwork.kernel.org/patch/10879899/
---
 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index ad9c290..23894db 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -1,10 +1,12 @@ 
 * Renesas R-Car generation 3 USB 2.0 PHY
 
 This file provides information on what the device node for the R-Car generation
-3 and RZ/G2 USB 2.0 PHY contain.
+3, RZ/G1C and RZ/G2 USB 2.0 PHY contain.
 
 Required properties:
-- compatible: "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
+- compatible: "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470
+	      SoC.
+	      "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
 	      SoC.
 	      "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0
 	      SoC.