@@ -301,6 +301,20 @@
#power-domain-cells = <1>;
};
+ tsc: thermal@e6198000 {
+ compatible = "renesas,r8a774b1-thermal";
+ reg = <0 0xe6198000 0 0x100>,
+ <0 0xe61a0000 0 0x100>,
+ <0 0xe61a8000 0 0x100>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <1>;
+ };
+
i2c4: i2c@e66d8000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -832,6 +846,66 @@
};
};
+ thermal-zones {
+ sensor_thermal1: sensor-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+ sustainable-power = <2439>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal2: sensor-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
+ sustainable-power = <2439>;
+
+ trips {
+ sensor2_crit: sensor2-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal3: sensor-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 2>;
+ sustainable-power = <2439>;
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&a57_0 0 2>;
+ contribution = <1024>;
+ };
+ };
+ trips {
+ target: trip-point1 {
+ temperature = <100000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ sensor3_crit: sensor3-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
Add thermal support for R8A774B1 (RZ/G2N) SoC. Based on the work done for r8a77965 SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> --- arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 74 +++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+)