diff mbox series

usb: renesas_usbhs: Clear PIPECFG for re-enabling pipe with other EPNUM

Message ID 1615168538-26101-1-git-send-email-yoshihiro.shimoda.uh@renesas.com (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show
Series usb: renesas_usbhs: Clear PIPECFG for re-enabling pipe with other EPNUM | expand

Commit Message

Yoshihiro Shimoda March 8, 2021, 1:55 a.m. UTC
According to the datasheet, this controller has a restriction
which "set an endpoint number so that combinations of the DIR bit and
the EPNUM bits do not overlap.". However, since the udc core driver is
possible to assign a bulk pipe as an interrupt endpoint, an endpoint
number may not match the pipe number. After that, when user rebinds
another gadget driver, this driver broke the restriction because
the driver didn't clear any configuration in usb_ep_disable().

Example:
 # modprobe g_ncm
 Then, EP3 = pipe 3, EP4 = pipe 4, EP5 = pipe 6
 # rmmod g_ncm
 # modprobe g_hid
 Then, EP3 = pipe 6, EP4 = pipe 7.
 So, pipe 3 and pipe 6 are set as EP3.

So, clear PIPECFG register in usbhs_pipe_free().

Fixes: dfb87b8bfe09 ("usb: renesas_usbhs: gadget: fix re-enabling pipe without re-connecting")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 drivers/usb/renesas_usbhs/pipe.c | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c
index e7334b7..75fff2e 100644
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -746,6 +746,8 @@  struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv,
 
 void usbhs_pipe_free(struct usbhs_pipe *pipe)
 {
+	usbhsp_pipe_select(pipe);
+	usbhsp_pipe_cfg_set(pipe, 0xFFFF, 0);
 	usbhsp_put_pipe(pipe);
 }