diff mbox

[v2,11/11] ARM: dts: sk-rzg1e: add Ether support

Message ID 1633148.RWrrAXQYR6@wasted.cogentembedded.com (mailing list archive)
State Accepted
Commit 6b334366e63678c777367002eb87c297a10d2751
Delegated to: Simon Horman
Headers show

Commit Message

Sergei Shtylyov Nov. 4, 2016, 10:05 p.m. UTC 
Define the SK-RZG1E board dependent part of the Ether device node.
Enable DHCP and NFS root  for the kernel booting.

Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 2:
- added Geert's tag.

 arch/arm/boot/dts/r8a7745-sk-rzg1e.dts |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
diff mbox

Patch

Index: renesas/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
+++ renesas/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
@@ -20,7 +20,7 @@ 
 	};
 
 	chosen {
-		bootargs = "ignore_loglevel";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -37,3 +37,16 @@ 
 &scif2 {
 	status = "okay";
 };
+
+&ether {
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};