diff mbox

arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules

Message ID 20161026052422.17283.57864.sendpatchset@little-apple (mailing list archive)
State Accepted
Commit 833c97254724a620d1d9fb9a580681fb52536fbf
Headers show

Commit Message

Magnus Damm Oct. 26, 2016, 5:24 a.m. UTC
From: Magnus Damm <damm+renesas@opensource.se>

Extend the ARM64 defconfig to enable the DU DRM device as module
together with required dependencies of V4L2 FCP and VSP modules.

This enables VGA output on the r8a7795 Salvator-X board.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---

 Written against next-20161026

 arch/arm64/configs/defconfig |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Simon Horman Oct. 27, 2016, 7:08 a.m. UTC | #1
On Wed, Oct 26, 2016 at 02:24:22PM +0900, Magnus Damm wrote:
> From: Magnus Damm <damm+renesas@opensource.se>
> 
> Extend the ARM64 defconfig to enable the DU DRM device as module
> together with required dependencies of V4L2 FCP and VSP modules.
> 
> This enables VGA output on the r8a7795 Salvator-X board.
> 
> Signed-off-by: Magnus Damm <damm+renesas@opensource.se>

Thanks, I have queued this up.
Simon Horman Oct. 27, 2016, 7:15 a.m. UTC | #2
On Thu, Oct 27, 2016 at 09:08:01AM +0200, Simon Horman wrote:
> On Wed, Oct 26, 2016 at 02:24:22PM +0900, Magnus Damm wrote:
> > From: Magnus Damm <damm+renesas@opensource.se>
> > 
> > Extend the ARM64 defconfig to enable the DU DRM device as module
> > together with required dependencies of V4L2 FCP and VSP modules.
> > 
> > This enables VGA output on the r8a7795 Salvator-X board.
> > 
> > Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
> 
> Thanks, I have queued this up.

Given discussion elsewhere on enabling DU I am holding off on this for a
little; it is not queued up for now.
Magnus Damm Oct. 27, 2016, 7:37 a.m. UTC | #3
Hi Simon,

On Thu, Oct 27, 2016 at 4:15 PM, Simon Horman <horms@verge.net.au> wrote:
> On Thu, Oct 27, 2016 at 09:08:01AM +0200, Simon Horman wrote:
>> On Wed, Oct 26, 2016 at 02:24:22PM +0900, Magnus Damm wrote:
>> > From: Magnus Damm <damm+renesas@opensource.se>
>> >
>> > Extend the ARM64 defconfig to enable the DU DRM device as module
>> > together with required dependencies of V4L2 FCP and VSP modules.
>> >
>> > This enables VGA output on the r8a7795 Salvator-X board.
>> >
>> > Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
>>
>> Thanks, I have queued this up.
>
> Given discussion elsewhere on enabling DU I am holding off on this for a
> little; it is not queued up for now.

Sure, thanks for holding off the DT integration patches for r8a7796.
Please note that as of mainline v4.9-rc2 the r8a7795 Salvator-X board
has thanks to DU, FCP and VSP a working VGA port. So enabling those
devices in the defconfig from now on makes sense to me.

Cheers,

/ magnus
Simon Horman Oct. 27, 2016, 10:19 a.m. UTC | #4
On Thu, Oct 27, 2016 at 04:37:53PM +0900, Magnus Damm wrote:
> Hi Simon,
> 
> On Thu, Oct 27, 2016 at 4:15 PM, Simon Horman <horms@verge.net.au> wrote:
> > On Thu, Oct 27, 2016 at 09:08:01AM +0200, Simon Horman wrote:
> >> On Wed, Oct 26, 2016 at 02:24:22PM +0900, Magnus Damm wrote:
> >> > From: Magnus Damm <damm+renesas@opensource.se>
> >> >
> >> > Extend the ARM64 defconfig to enable the DU DRM device as module
> >> > together with required dependencies of V4L2 FCP and VSP modules.
> >> >
> >> > This enables VGA output on the r8a7795 Salvator-X board.
> >> >
> >> > Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
> >>
> >> Thanks, I have queued this up.
> >
> > Given discussion elsewhere on enabling DU I am holding off on this for a
> > little; it is not queued up for now.
> 
> Sure, thanks for holding off the DT integration patches for r8a7796.
> Please note that as of mainline v4.9-rc2 the r8a7795 Salvator-X board
> has thanks to DU, FCP and VSP a working VGA port. So enabling those
> devices in the defconfig from now on makes sense to me.

Understood, I will queue up this patch.
Simon Horman Oct. 28, 2016, 5:44 a.m. UTC | #5
On Thu, Oct 27, 2016 at 04:37:53PM +0900, Magnus Damm wrote:
> Hi Simon,
> 
> On Thu, Oct 27, 2016 at 4:15 PM, Simon Horman <horms@verge.net.au> wrote:
> > On Thu, Oct 27, 2016 at 09:08:01AM +0200, Simon Horman wrote:
> >> On Wed, Oct 26, 2016 at 02:24:22PM +0900, Magnus Damm wrote:
> >> > From: Magnus Damm <damm+renesas@opensource.se>
> >> >
> >> > Extend the ARM64 defconfig to enable the DU DRM device as module
> >> > together with required dependencies of V4L2 FCP and VSP modules.
> >> >
> >> > This enables VGA output on the r8a7795 Salvator-X board.
> >> >
> >> > Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
> >>
> >> Thanks, I have queued this up.
> >
> > Given discussion elsewhere on enabling DU I am holding off on this for a
> > little; it is not queued up for now.
> 
> Sure, thanks for holding off the DT integration patches for r8a7796.
> Please note that as of mainline v4.9-rc2 the r8a7795 Salvator-X board
> has thanks to DU, FCP and VSP a working VGA port. So enabling those
> devices in the defconfig from now on makes sense to me.

Understood, I have queued this up.
diff mbox

Patch

--- 0001/arch/arm64/configs/defconfig
+++ work/arch/arm64/configs/defconfig	2016-10-26 14:10:58.220607110 +0900
@@ -293,8 +293,22 @@  CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_QCOM_SMD_RPM=y
 CONFIG_REGULATOR_QCOM_SPMI=y
 CONFIG_REGULATOR_S2MPS11=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+# CONFIG_DVB_NET is not set
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_RENESAS_FCP=m
+CONFIG_VIDEO_RENESAS_VSP1=m
 CONFIG_DRM=m
 CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_RCAR_DU=m
+CONFIG_DRM_RCAR_HDMI=y
+CONFIG_DRM_RCAR_LVDS=y
+CONFIG_DRM_RCAR_VSP=y
 CONFIG_DRM_TEGRA=m
 CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_DRM_I2C_ADV7511=m