[RFC,5/5] arm64: dts: renesas: salvator-x: Add ADV7482 support

Commit Message

Niklas Söderlund July 30, 2017, 8:56 p.m. UTC

From: Kieran Bingham <[e-mail]>

The Salvator boards use an ADV7482 receiver for HDMI and CVBS inputs.

Provide ADV7482 node on the i2c4 bus, along with connectors for the
hdmi and cvbs inputs, and link to the csi20 and csi40 nodes as outputs.

Signed-off-by: Kieran Bingham <[e-mail]>
Reviewed-by: Laurent Pinchart <[e-mail]>
Signed-off-by: Niklas Söderlund <[e-mail]>
---
 arch/arm64/boot/dts/renesas/salvator-common.dtsi | 103 +++++++++++++++++++++++
 1 file changed, 103 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index bba4976bee619d42..30a669f842573474 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -65,6 +65,29 @@ 
 		enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 	};
 
+	cvbs-in {
+		compatible = "composite-video-connector";
+		label = "CVBS IN";
+
+		port {
+			cvbs_con: endpoint {
+				remote-endpoint = <&adv7482_ain7>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		label = "HDMI IN";
+		type = "a";
+
+		port {
+			hdmi_in_con: endpoint {
+				remote-endpoint = <&adv7482_hdmi>;
+			};
+		};
+	};
+
 	reg_1p8v: regulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.8V";
@@ -257,6 +280,37 @@ 
 	};
 };
 
+&csi20 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			csi20_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1>;
+				remote-endpoint = <&adv7482_txb>;
+			};
+		};
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&adv7482_txa>;
+			};
+		};
+	};
+};
+
 &du {
 	pinctrl-0 = <&du_pins>;
 	pinctrl-names = "default";
@@ -343,6 +397,55 @@ 
 
 		shunt-resistor-micro-ohms = <5000>;
 	};
+
+	video-receiver@70 {
+		compatible = "adi,adv7482";
+		reg = <0x70>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gpio6>;
+		interrupt-names = "intrq1", "intrq2";
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
+			     <31 IRQ_TYPE_LEVEL_LOW>;
+
+		port@7 {
+			reg = <7>;
+
+			adv7482_ain7: endpoint {
+				remote-endpoint = <&cvbs_con>;
+			};
+		};
+
+		port@8 {
+			reg = <8>;
+
+			adv7482_hdmi: endpoint {
+				remote-endpoint = <&hdmi_in_con>;
+			};
+		};
+
+		port@10 {
+			reg = <10>;
+
+			adv7482_txa: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csi40_in>;
+			};
+		};
+
+		port@11 {
+			reg = <11>;
+
+			adv7482_txb: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1>;
+				remote-endpoint = <&csi20_in>;
+			};
+		};
+	};
 };
 
 &i2c_dvfs {