diff mbox series

[v3,1/3] dt-bindings: pinctrl: renesas,rzn1-pinctrl: documentation

Message ID 20180917163609.30457-2-phil.edworthy@renesas.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series Renesas R9A06G032 PINCTRL Driver | expand

Commit Message

Phil Edworthy Sept. 17, 2018, 4:36 p.m. UTC
The Renesas RZ/N1 device family PINCTRL node description.

Based on a patch originally written by Michel Pollet at Renesas.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
---
v3:
 - Use standard bindings
 - Change the way the functions are defined so it is easy to check
   against the hardware numbering.
 - Add functions for the MDIO source peripheral instead of using
   virtual pins.

v2:
 - Change filename to generic rzn1, instead of device specific.
 - Add "renesas,rzn1-pinctrl" compatible fallback string.
 - Example register size corrected.
 - Typos fixed.
 - Changes suggested by Jacopo Mondi.
 - rzn1-pinctrl.h squashed into this as requested by Rob Herring.
---
 .../bindings/pinctrl/renesas,rzn1-pinctrl.txt | 129 ++++++++++++++++
 include/dt-bindings/pinctrl/rzn1-pinctrl.h    | 141 ++++++++++++++++++
 2 files changed, 270 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
 create mode 100644 include/dt-bindings/pinctrl/rzn1-pinctrl.h

Comments

Jacopo Mondi Sept. 18, 2018, 9:27 a.m. UTC | #1
Hi Phil,
   thanks for the update. This looks much better :)

On Mon, Sep 17, 2018 at 05:36:07PM +0100, Phil Edworthy wrote:
> The Renesas RZ/N1 device family PINCTRL node description.
>
> Based on a patch originally written by Michel Pollet at Renesas.
>
> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> ---
> v3:
>  - Use standard bindings
>  - Change the way the functions are defined so it is easy to check
>    against the hardware numbering.
>  - Add functions for the MDIO source peripheral instead of using
>    virtual pins.
>
> v2:
>  - Change filename to generic rzn1, instead of device specific.
>  - Add "renesas,rzn1-pinctrl" compatible fallback string.
>  - Example register size corrected.
>  - Typos fixed.
>  - Changes suggested by Jacopo Mondi.
>  - rzn1-pinctrl.h squashed into this as requested by Rob Herring.
> ---
>  .../bindings/pinctrl/renesas,rzn1-pinctrl.txt | 129 ++++++++++++++++
>  include/dt-bindings/pinctrl/rzn1-pinctrl.h    | 141 ++++++++++++++++++
>  2 files changed, 270 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
>  create mode 100644 include/dt-bindings/pinctrl/rzn1-pinctrl.h
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
> new file mode 100644
> index 000000000000..203131ed8d2a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
> @@ -0,0 +1,129 @@
> +Renesas RZ/N1 SoC Pinctrl node description.
> +
> +Pin controller node
> +-------------------
> +Required properties:
> +- compatible: SoC-specific compatible string "renesas,<soc-specific>-pinctrl"
> +  followed by "renesas,rzn1-pinctrl" as fallback. The SoC-specific compatible
> +  strings must be one of:
> +	"renesas,r9a06g032-pinctrl" for RZ/N1D
> +	"renesas,r9a06g033-pinctrl" for RZ/N1S
> +- reg: Address base and length of the memory area where the pin controller
> +  hardware is mapped to.
> +- clocks: phandles for the clock, see the description of clock-names below.
> +- clock-names: Contains the name of the clock:
> +    "bus", the bus clock, sometimes described as pclk, for register accesses.

If that's the only clock, the clock name is optional. If you drop it,
then please mention that the only phandle in 'clocks' refers to the
"bus" clock.

> +
> +Example:
> +	pinctrl: pin-controller@40067000 {
> +	    compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
> +	    reg = <0x40067000 0x1000>, <0x51000000 0x480>;
> +	    clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
> +	    clock-names = "bus";
> +	};
> +
> +Sub-nodes
> +---------
> +
> +The child nodes of the pin controller node describe a pin multiplexing
> +function or a GPIO controller alternatively.
> +
> +- Pin multiplexing sub-nodes:
> +  A pin multiplexing sub-node describes how to configure a set of
> +  (or a single) pin in some desired alternate function mode.
> +  A single sub-node may define several pin configurations.
> +  Please refer to pinctrl-bindings.txt to get to know more on generic
> +  pin properties usage.
> +
> +  The allowed generic formats for a pin multiplexing sub-node are the
> +  following ones:
> +
> +  node-1 {
> +      pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
> +      GENERIC_PINCONFIG;
> +  };
> +
> +  node-2 {
> +      sub-node-1 {
> +          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
> +          GENERIC_PINCONFIG;
> +      };
> +
> +      sub-node-2 {
> +          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
> +          GENERIC_PINCONFIG;
> +      };
> +
> +      ...
> +
> +      sub-node-n {
> +          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
> +          GENERIC_PINCONFIG;
> +      };
> +  };
> +
> +  Use the second format when pins part of the same logical group need to have
> +  different generic pin configuration flags applied.
> +
> +  Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle
> +  of the most external one.
> +
> +  Eg.
> +
> +  client-1 {
> +      ...
> +      pinctrl-0 = <&node-1>;
> +      ...
> +  };
> +
> +  client-2 {
> +      ...
> +      pinctrl-0 = <&node-2>;
> +      ...
> +  };
> +
> +  Required properties:
> +    - pinmux:
> +      integer array representing pin number and pin multiplexing configuration.
> +      When a pin has to be configured in alternate function mode, use this
> +      property to identify the pin by its global index, and provide its
> +      alternate function configuration number along with it.
> +      When multiple pins are required to be configured as part of the same
> +      alternate function they shall be specified as members of the same
> +      argument list of a single "pinmux" property.
> +      Integers values in the "pinmux" argument list are assembled as:
> +      (PIN | MUX_FUNC << 8)
> +      where PIN directly corresponds to the pl_gpio pin number and MUX_FUNC is
> +      one of the alternate function identifiers defined in:
> +      <include/dt-bindings/pinctrl/rzn1-pinctrl.h>

You have a macro for assembling pin and mux functions, do you think it
is worth mentioning it here?

> +      These identifiers collapse the IO Multiplex Configuration Level 1 and
> +      Level 2 numbers that are detailed in the hardware reference manual into a
> +      single number. The identifiers for Level 2 are simply offset by 10.
> +      Additional identifiers are provided to specify the MDIO source peripheral.

As we discussed offline, I don't see that much value in mentioning
details about the pinmuxing levels, as this is driver internal stuff
that reflects on which set of registers to use depending on the muxing
'level'. I understand though that as the SoC manual mentions levels,
you may want to refer to them. Up to you....

> +
> +  Example:
> +  A serial communication interface with a TX output pin and an RX input pin.
> +
> +  &pinctrl {
> +	pins_uart0: pins_uart0 {
> +		pinmux = <
> +			RZN1_MUX(103, UART0_I)	/* UART0_TXD */
> +			RZN1_MUX(104, UART0_I)	/* UART0_RXD */
> +		>;
> +	};
> +  };
> +
> +  Example 2:
> +  Here we set the pull up on the RXD pin of the UART.
> +
> +  &pinctrl {
> +	pins_uart0: pins_uart0 {
> +		pins_uart6_tx {
> +			pinmux = <RZN1_MUX(103, UART0_I)>;	/* UART0_TXD */
> +		};
> +		pins_uart6_rx {
> +			pinmux = <RZN1_MUX(104, UART0_I)>;	/* UART0_RXD */
> +			bias-pull-up;
> +		};
> +	};
> +  };

I like this version much more. With those minor issues clarified (up
to you to decide how to handle them) please add my:
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Cheers
   j


> diff --git a/include/dt-bindings/pinctrl/rzn1-pinctrl.h b/include/dt-bindings/pinctrl/rzn1-pinctrl.h
> new file mode 100644
> index 000000000000..40369ee36e6a
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/rzn1-pinctrl.h
> @@ -0,0 +1,141 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Defines macros and constants for Renesas RZ/N1 pin controller pin
> + * muxing functions.
> + */
> +#ifndef __DT_BINDINGS_RZN1_PINCTRL_H
> +#define __DT_BINDINGS_RZN1_PINCTRL_H
> +
> +#define RZN1_MUX(_gpio, _func) \
> +	(((RZN1_FUNC_##_func) << 8) | (_gpio))
> +
> +/*
> + * Given the different levels of muxing on the SoC, it was decided to
> + * 'linearize' them into one numerical space. So mux level 1, 2 and the MDIO
> + * muxes are all represented by one single value.
> + *
> + * You can derive the hardware value pretty easily too, as
> + * 0...9   are Level 1
> + * 10...71 are Level 2. The Level 2 mux will be set to this
> + *         value - RZN1_FUNC_L2_OFFSET, and the Level 1 mux will be
> + *         set accordingly.
> + * 72...103 are for the 2 MDIO muxes.
> + */
> +#define RZN1_FUNC_HIGHZ				0
> +#define RZN1_FUNC_0L				1
> +#define RZN1_FUNC_CLK_ETH_MII_RGMII_RMII	2
> +#define RZN1_FUNC_CLK_ETH_NAND			3
> +#define RZN1_FUNC_QSPI				4
> +#define RZN1_FUNC_SDIO				5
> +#define RZN1_FUNC_LCD				6
> +#define RZN1_FUNC_LCD_E				7
> +#define RZN1_FUNC_MSEBIM			8
> +#define RZN1_FUNC_MSEBIS			9
> +#define RZN1_FUNC_L2_OFFSET			10	/* I'm Special */
> +
> +#define RZN1_FUNC_HIGHZ1			(RZN1_FUNC_L2_OFFSET + 0)
> +#define RZN1_FUNC_ETHERCAT			(RZN1_FUNC_L2_OFFSET + 1)
> +#define RZN1_FUNC_SERCOS3			(RZN1_FUNC_L2_OFFSET + 2)
> +#define RZN1_FUNC_SDIO_E			(RZN1_FUNC_L2_OFFSET + 3)
> +#define RZN1_FUNC_ETH_MDIO			(RZN1_FUNC_L2_OFFSET + 4)
> +#define RZN1_FUNC_ETH_MDIO_E1			(RZN1_FUNC_L2_OFFSET + 5)
> +#define RZN1_FUNC_USB				(RZN1_FUNC_L2_OFFSET + 6)
> +#define RZN1_FUNC_MSEBIM_E			(RZN1_FUNC_L2_OFFSET + 7)
> +#define RZN1_FUNC_MSEBIS_E			(RZN1_FUNC_L2_OFFSET + 8)
> +#define RZN1_FUNC_RSV				(RZN1_FUNC_L2_OFFSET + 9)
> +#define RZN1_FUNC_RSV_E				(RZN1_FUNC_L2_OFFSET + 10)
> +#define RZN1_FUNC_RSV_E1			(RZN1_FUNC_L2_OFFSET + 11)
> +#define RZN1_FUNC_UART0_I			(RZN1_FUNC_L2_OFFSET + 12)
> +#define RZN1_FUNC_UART0_I_E			(RZN1_FUNC_L2_OFFSET + 13)
> +#define RZN1_FUNC_UART1_I			(RZN1_FUNC_L2_OFFSET + 14)
> +#define RZN1_FUNC_UART1_I_E			(RZN1_FUNC_L2_OFFSET + 15)
> +#define RZN1_FUNC_UART2_I			(RZN1_FUNC_L2_OFFSET + 16)
> +#define RZN1_FUNC_UART2_I_E			(RZN1_FUNC_L2_OFFSET + 17)
> +#define RZN1_FUNC_UART0				(RZN1_FUNC_L2_OFFSET + 18)
> +#define RZN1_FUNC_UART0_E			(RZN1_FUNC_L2_OFFSET + 19)
> +#define RZN1_FUNC_UART1				(RZN1_FUNC_L2_OFFSET + 20)
> +#define RZN1_FUNC_UART1_E			(RZN1_FUNC_L2_OFFSET + 21)
> +#define RZN1_FUNC_UART2				(RZN1_FUNC_L2_OFFSET + 22)
> +#define RZN1_FUNC_UART2_E			(RZN1_FUNC_L2_OFFSET + 23)
> +#define RZN1_FUNC_UART3				(RZN1_FUNC_L2_OFFSET + 24)
> +#define RZN1_FUNC_UART3_E			(RZN1_FUNC_L2_OFFSET + 25)
> +#define RZN1_FUNC_UART4				(RZN1_FUNC_L2_OFFSET + 26)
> +#define RZN1_FUNC_UART4_E			(RZN1_FUNC_L2_OFFSET + 27)
> +#define RZN1_FUNC_UART5				(RZN1_FUNC_L2_OFFSET + 28)
> +#define RZN1_FUNC_UART5_E			(RZN1_FUNC_L2_OFFSET + 29)
> +#define RZN1_FUNC_UART6				(RZN1_FUNC_L2_OFFSET + 30)
> +#define RZN1_FUNC_UART6_E			(RZN1_FUNC_L2_OFFSET + 31)
> +#define RZN1_FUNC_UART7				(RZN1_FUNC_L2_OFFSET + 32)
> +#define RZN1_FUNC_UART7_E			(RZN1_FUNC_L2_OFFSET + 33)
> +#define RZN1_FUNC_SPI0_M			(RZN1_FUNC_L2_OFFSET + 34)
> +#define RZN1_FUNC_SPI0_M_E			(RZN1_FUNC_L2_OFFSET + 35)
> +#define RZN1_FUNC_SPI1_M			(RZN1_FUNC_L2_OFFSET + 36)
> +#define RZN1_FUNC_SPI1_M_E			(RZN1_FUNC_L2_OFFSET + 37)
> +#define RZN1_FUNC_SPI2_M			(RZN1_FUNC_L2_OFFSET + 38)
> +#define RZN1_FUNC_SPI2_M_E			(RZN1_FUNC_L2_OFFSET + 39)
> +#define RZN1_FUNC_SPI3_M			(RZN1_FUNC_L2_OFFSET + 40)
> +#define RZN1_FUNC_SPI3_M_E			(RZN1_FUNC_L2_OFFSET + 41)
> +#define RZN1_FUNC_SPI4_S			(RZN1_FUNC_L2_OFFSET + 42)
> +#define RZN1_FUNC_SPI4_S_E			(RZN1_FUNC_L2_OFFSET + 43)
> +#define RZN1_FUNC_SPI5_S			(RZN1_FUNC_L2_OFFSET + 44)
> +#define RZN1_FUNC_SPI5_S_E			(RZN1_FUNC_L2_OFFSET + 45)
> +#define RZN1_FUNC_SGPIO0_M			(RZN1_FUNC_L2_OFFSET + 46)
> +#define RZN1_FUNC_SGPIO1_M			(RZN1_FUNC_L2_OFFSET + 47)
> +#define RZN1_FUNC_GPIO				(RZN1_FUNC_L2_OFFSET + 48)
> +#define RZN1_FUNC_CAN				(RZN1_FUNC_L2_OFFSET + 49)
> +#define RZN1_FUNC_I2C				(RZN1_FUNC_L2_OFFSET + 50)
> +#define RZN1_FUNC_SAFE				(RZN1_FUNC_L2_OFFSET + 51)
> +#define RZN1_FUNC_PTO_PWM			(RZN1_FUNC_L2_OFFSET + 52)
> +#define RZN1_FUNC_PTO_PWM1			(RZN1_FUNC_L2_OFFSET + 53)
> +#define RZN1_FUNC_PTO_PWM2			(RZN1_FUNC_L2_OFFSET + 54)
> +#define RZN1_FUNC_PTO_PWM3			(RZN1_FUNC_L2_OFFSET + 55)
> +#define RZN1_FUNC_PTO_PWM4			(RZN1_FUNC_L2_OFFSET + 56)
> +#define RZN1_FUNC_DELTA_SIGMA			(RZN1_FUNC_L2_OFFSET + 57)
> +#define RZN1_FUNC_SGPIO2_M			(RZN1_FUNC_L2_OFFSET + 58)
> +#define RZN1_FUNC_SGPIO3_M			(RZN1_FUNC_L2_OFFSET + 59)
> +#define RZN1_FUNC_SGPIO4_S			(RZN1_FUNC_L2_OFFSET + 60)
> +#define RZN1_FUNC_MAC_MTIP_SWITCH		(RZN1_FUNC_L2_OFFSET + 61)
> +
> +#define RZN1_FUNC_MDIO_OFFSET			(RZN1_FUNC_L2_OFFSET + 62)
> +
> +/* These are MDIO0 peripherals for the RZN1_FUNC_ETH_MDIO function */
> +#define RZN1_FUNC_MDIO0_HIGHZ			(RZN1_FUNC_MDIO_OFFSET + 0)
> +#define RZN1_FUNC_MDIO0_GMAC0			(RZN1_FUNC_MDIO_OFFSET + 1)
> +#define RZN1_FUNC_MDIO0_GMAC1			(RZN1_FUNC_MDIO_OFFSET + 2)
> +#define RZN1_FUNC_MDIO0_ECAT			(RZN1_FUNC_MDIO_OFFSET + 3)
> +#define RZN1_FUNC_MDIO0_S3_MDIO0		(RZN1_FUNC_MDIO_OFFSET + 4)
> +#define RZN1_FUNC_MDIO0_S3_MDIO1		(RZN1_FUNC_MDIO_OFFSET + 5)
> +#define RZN1_FUNC_MDIO0_HWRTOS			(RZN1_FUNC_MDIO_OFFSET + 6)
> +#define RZN1_FUNC_MDIO0_SWITCH			(RZN1_FUNC_MDIO_OFFSET + 7)
> +/* These are MDIO0 peripherals for the RZN1_FUNC_ETH_MDIO_E1 function */
> +#define RZN1_FUNC_MDIO0_E1_HIGHZ		(RZN1_FUNC_MDIO_OFFSET + 8)
> +#define RZN1_FUNC_MDIO0_E1_GMAC0		(RZN1_FUNC_MDIO_OFFSET + 9)
> +#define RZN1_FUNC_MDIO0_E1_GMAC1		(RZN1_FUNC_MDIO_OFFSET + 10)
> +#define RZN1_FUNC_MDIO0_E1_ECAT			(RZN1_FUNC_MDIO_OFFSET + 11)
> +#define RZN1_FUNC_MDIO0_E1_S3_MDIO0		(RZN1_FUNC_MDIO_OFFSET + 12)
> +#define RZN1_FUNC_MDIO0_E1_S3_MDIO1		(RZN1_FUNC_MDIO_OFFSET + 13)
> +#define RZN1_FUNC_MDIO0_E1_HWRTOS		(RZN1_FUNC_MDIO_OFFSET + 14)
> +#define RZN1_FUNC_MDIO0_E1_SWITCH		(RZN1_FUNC_MDIO_OFFSET + 15)
> +
> +/* These are MDIO1 peripherals for the RZN1_FUNC_ETH_MDIO function */
> +#define RZN1_FUNC_MDIO1_HIGHZ			(RZN1_FUNC_MDIO_OFFSET + 16)
> +#define RZN1_FUNC_MDIO1_GMAC0			(RZN1_FUNC_MDIO_OFFSET + 17)
> +#define RZN1_FUNC_MDIO1_GMAC1			(RZN1_FUNC_MDIO_OFFSET + 18)
> +#define RZN1_FUNC_MDIO1_ECAT			(RZN1_FUNC_MDIO_OFFSET + 19)
> +#define RZN1_FUNC_MDIO1_S3_MDIO0		(RZN1_FUNC_MDIO_OFFSET + 20)
> +#define RZN1_FUNC_MDIO1_S3_MDIO1		(RZN1_FUNC_MDIO_OFFSET + 21)
> +#define RZN1_FUNC_MDIO1_HWRTOS			(RZN1_FUNC_MDIO_OFFSET + 22)
> +#define RZN1_FUNC_MDIO1_SWITCH			(RZN1_FUNC_MDIO_OFFSET + 23)
> +/* These are MDIO1 peripherals for the RZN1_FUNC_ETH_MDIO_E1 function */
> +#define RZN1_FUNC_MDIO1_E1_HIGHZ		(RZN1_FUNC_MDIO_OFFSET + 24)
> +#define RZN1_FUNC_MDIO1_E1_GMAC0		(RZN1_FUNC_MDIO_OFFSET + 25)
> +#define RZN1_FUNC_MDIO1_E1_GMAC1		(RZN1_FUNC_MDIO_OFFSET + 26)
> +#define RZN1_FUNC_MDIO1_E1_ECAT			(RZN1_FUNC_MDIO_OFFSET + 27)
> +#define RZN1_FUNC_MDIO1_E1_S3_MDIO0		(RZN1_FUNC_MDIO_OFFSET + 28)
> +#define RZN1_FUNC_MDIO1_E1_S3_MDIO1		(RZN1_FUNC_MDIO_OFFSET + 29)
> +#define RZN1_FUNC_MDIO1_E1_HWRTOS		(RZN1_FUNC_MDIO_OFFSET + 30)
> +#define RZN1_FUNC_MDIO1_E1_SWITCH		(RZN1_FUNC_MDIO_OFFSET + 31)
> +
> +#define RZN1_FUNC_MAX				(RZN1_FUNC_MDIO_OFFSET + 32)
> +
> +#endif /* __DT_BINDINGS_RZN1_PINCTRL_H */
> --
> 2.17.1
>
Phil Edworthy Sept. 18, 2018, 9:44 a.m. UTC | #2
Hi Jacopo,

On 18 September 2018 10:27 jacopo mondi wrote:
> Hi Phil,
>    thanks for the update. This looks much better :)
> 
> On Mon, Sep 17, 2018 at 05:36:07PM +0100, Phil Edworthy wrote:
> > The Renesas RZ/N1 device family PINCTRL node description.
> >
> > Based on a patch originally written by Michel Pollet at Renesas.
> >
> > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > ---
> > v3:
> >  - Use standard bindings
> >  - Change the way the functions are defined so it is easy to check
> >    against the hardware numbering.
> >  - Add functions for the MDIO source peripheral instead of using
> >    virtual pins.
> >
> > v2:
> >  - Change filename to generic rzn1, instead of device specific.
> >  - Add "renesas,rzn1-pinctrl" compatible fallback string.
> >  - Example register size corrected.
> >  - Typos fixed.
> >  - Changes suggested by Jacopo Mondi.
> >  - rzn1-pinctrl.h squashed into this as requested by Rob Herring.
> > ---
> >  .../bindings/pinctrl/renesas,rzn1-pinctrl.txt | 129 ++++++++++++++++
> >  include/dt-bindings/pinctrl/rzn1-pinctrl.h    | 141 ++++++++++++++++++
> >  2 files changed, 270 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
> >  create mode 100644 include/dt-bindings/pinctrl/rzn1-pinctrl.h
> >
> > diff --git
> > a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
> > b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
> > new file mode 100644
> > index 000000000000..203131ed8d2a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.t
> > +++ xt
> > @@ -0,0 +1,129 @@
> > +Renesas RZ/N1 SoC Pinctrl node description.
> > +
> > +Pin controller node
> > +-------------------
> > +Required properties:
> > +- compatible: SoC-specific compatible string "renesas,<soc-specific>-
> pinctrl"
> > +  followed by "renesas,rzn1-pinctrl" as fallback. The SoC-specific
> > +compatible
> > +  strings must be one of:
> > +	"renesas,r9a06g032-pinctrl" for RZ/N1D
> > +	"renesas,r9a06g033-pinctrl" for RZ/N1S
> > +- reg: Address base and length of the memory area where the pin
> > +controller
> > +  hardware is mapped to.
> > +- clocks: phandles for the clock, see the description of clock-names below.
> > +- clock-names: Contains the name of the clock:
> > +    "bus", the bus clock, sometimes described as pclk, for register accesses.
> 
> If that's the only clock, the clock name is optional. If you drop it, then please
> mention that the only phandle in 'clocks' refers to the "bus" clock.
The driver currently specifies the "bus" name when calling devm_clk_get(), so
you need the clock-names.
If other changes are required, I will change the driver and update the binding
doc so they are not needed.

> > +
> > +Example:
> > +	pinctrl: pin-controller@40067000 {
> > +	    compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
> > +	    reg = <0x40067000 0x1000>, <0x51000000 0x480>;
> > +	    clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
> > +	    clock-names = "bus";
> > +	};
> > +
> > +Sub-nodes
> > +---------
> > +
> > +The child nodes of the pin controller node describe a pin
> > +multiplexing function or a GPIO controller alternatively.
> > +
> > +- Pin multiplexing sub-nodes:
> > +  A pin multiplexing sub-node describes how to configure a set of
> > +  (or a single) pin in some desired alternate function mode.
> > +  A single sub-node may define several pin configurations.
> > +  Please refer to pinctrl-bindings.txt to get to know more on generic
> > +  pin properties usage.
> > +
> > +  The allowed generic formats for a pin multiplexing sub-node are the
> > + following ones:
> > +
> > +  node-1 {
> > +      pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
> > +      GENERIC_PINCONFIG;
> > +  };
> > +
> > +  node-2 {
> > +      sub-node-1 {
> > +          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
> > +          GENERIC_PINCONFIG;
> > +      };
> > +
> > +      sub-node-2 {
> > +          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
> > +          GENERIC_PINCONFIG;
> > +      };
> > +
> > +      ...
> > +
> > +      sub-node-n {
> > +          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
> > +          GENERIC_PINCONFIG;
> > +      };
> > +  };
> > +
> > +  Use the second format when pins part of the same logical group need
> > + to have  different generic pin configuration flags applied.
> > +
> > +  Client sub-nodes shall refer to pin multiplexing sub-nodes using
> > + the phandle  of the most external one.
> > +
> > +  Eg.
> > +
> > +  client-1 {
> > +      ...
> > +      pinctrl-0 = <&node-1>;
> > +      ...
> > +  };
> > +
> > +  client-2 {
> > +      ...
> > +      pinctrl-0 = <&node-2>;
> > +      ...
> > +  };
> > +
> > +  Required properties:
> > +    - pinmux:
> > +      integer array representing pin number and pin multiplexing
> configuration.
> > +      When a pin has to be configured in alternate function mode, use this
> > +      property to identify the pin by its global index, and provide its
> > +      alternate function configuration number along with it.
> > +      When multiple pins are required to be configured as part of the same
> > +      alternate function they shall be specified as members of the same
> > +      argument list of a single "pinmux" property.
> > +      Integers values in the "pinmux" argument list are assembled as:
> > +      (PIN | MUX_FUNC << 8)
> > +      where PIN directly corresponds to the pl_gpio pin number and
> MUX_FUNC is
> > +      one of the alternate function identifiers defined in:
> > +      <include/dt-bindings/pinctrl/rzn1-pinctrl.h>
> 
> You have a macro for assembling pin and mux functions, do you think it is
> worth mentioning it here?
Not sure it’s worth it, it's used in the examples anyway.

> > +      These identifiers collapse the IO Multiplex Configuration Level 1 and
> > +      Level 2 numbers that are detailed in the hardware reference manual
> into a
> > +      single number. The identifiers for Level 2 are simply offset by 10.
> > +      Additional identifiers are provided to specify the MDIO source
> peripheral.
> 
> As we discussed offline, I don't see that much value in mentioning details
> about the pinmuxing levels, as this is driver internal stuff that reflects on
> which set of registers to use depending on the muxing 'level'. I understand
> though that as the SoC manual mentions levels, you may want to refer to
> them. Up to you....
I'll leave it as is unless there are other comments.

> > +
> > +  Example:
> > +  A serial communication interface with a TX output pin and an RX input
> pin.
> > +
> > +  &pinctrl {
> > +	pins_uart0: pins_uart0 {
> > +		pinmux = <
> > +			RZN1_MUX(103, UART0_I)	/* UART0_TXD */
> > +			RZN1_MUX(104, UART0_I)	/* UART0_RXD */
> > +		>;
> > +	};
> > +  };
> > +
> > +  Example 2:
> > +  Here we set the pull up on the RXD pin of the UART.
> > +
> > +  &pinctrl {
> > +	pins_uart0: pins_uart0 {
> > +		pins_uart6_tx {
> > +			pinmux = <RZN1_MUX(103, UART0_I)>;	/*
> UART0_TXD */
> > +		};
> > +		pins_uart6_rx {
> > +			pinmux = <RZN1_MUX(104, UART0_I)>;	/*
> UART0_RXD */
> > +			bias-pull-up;
> > +		};
> > +	};
> > +  };
> 
> I like this version much more. With those minor issues clarified (up to you to
> decide how to handle them) please add my:
> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Many thanks for your review!
Phil


> Cheers
>    j
> 
> 
> > diff --git a/include/dt-bindings/pinctrl/rzn1-pinctrl.h
> > b/include/dt-bindings/pinctrl/rzn1-pinctrl.h
> > new file mode 100644
> > index 000000000000..40369ee36e6a
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/rzn1-pinctrl.h
> > @@ -0,0 +1,141 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Defines macros and constants for Renesas RZ/N1 pin controller pin
> > + * muxing functions.
> > + */
> > +#ifndef __DT_BINDINGS_RZN1_PINCTRL_H
> > +#define __DT_BINDINGS_RZN1_PINCTRL_H
> > +
> > +#define RZN1_MUX(_gpio, _func) \
> > +	(((RZN1_FUNC_##_func) << 8) | (_gpio))
> > +
> > +/*
> > + * Given the different levels of muxing on the SoC, it was decided to
> > + * 'linearize' them into one numerical space. So mux level 1, 2 and
> > +the MDIO
> > + * muxes are all represented by one single value.
> > + *
> > + * You can derive the hardware value pretty easily too, as
> > + * 0...9   are Level 1
> > + * 10...71 are Level 2. The Level 2 mux will be set to this
> > + *         value - RZN1_FUNC_L2_OFFSET, and the Level 1 mux will be
> > + *         set accordingly.
> > + * 72...103 are for the 2 MDIO muxes.
> > + */
> > +#define RZN1_FUNC_HIGHZ				0
> > +#define RZN1_FUNC_0L				1
> > +#define RZN1_FUNC_CLK_ETH_MII_RGMII_RMII	2
> > +#define RZN1_FUNC_CLK_ETH_NAND			3
> > +#define RZN1_FUNC_QSPI				4
> > +#define RZN1_FUNC_SDIO				5
> > +#define RZN1_FUNC_LCD				6
> > +#define RZN1_FUNC_LCD_E				7
> > +#define RZN1_FUNC_MSEBIM			8
> > +#define RZN1_FUNC_MSEBIS			9
> > +#define RZN1_FUNC_L2_OFFSET			10	/* I'm Special
> */
> > +
> > +#define RZN1_FUNC_HIGHZ1
> 	(RZN1_FUNC_L2_OFFSET + 0)
> > +#define RZN1_FUNC_ETHERCAT
> 	(RZN1_FUNC_L2_OFFSET + 1)
> > +#define RZN1_FUNC_SERCOS3
> 	(RZN1_FUNC_L2_OFFSET + 2)
> > +#define RZN1_FUNC_SDIO_E
> 	(RZN1_FUNC_L2_OFFSET + 3)
> > +#define RZN1_FUNC_ETH_MDIO
> 	(RZN1_FUNC_L2_OFFSET + 4)
> > +#define RZN1_FUNC_ETH_MDIO_E1
> 	(RZN1_FUNC_L2_OFFSET + 5)
> > +#define RZN1_FUNC_USB
> 	(RZN1_FUNC_L2_OFFSET + 6)
> > +#define RZN1_FUNC_MSEBIM_E
> 	(RZN1_FUNC_L2_OFFSET + 7)
> > +#define RZN1_FUNC_MSEBIS_E
> 	(RZN1_FUNC_L2_OFFSET + 8)
> > +#define RZN1_FUNC_RSV
> 	(RZN1_FUNC_L2_OFFSET + 9)
> > +#define RZN1_FUNC_RSV_E
> 	(RZN1_FUNC_L2_OFFSET + 10)
> > +#define RZN1_FUNC_RSV_E1
> 	(RZN1_FUNC_L2_OFFSET + 11)
> > +#define RZN1_FUNC_UART0_I
> 	(RZN1_FUNC_L2_OFFSET + 12)
> > +#define RZN1_FUNC_UART0_I_E
> 	(RZN1_FUNC_L2_OFFSET + 13)
> > +#define RZN1_FUNC_UART1_I
> 	(RZN1_FUNC_L2_OFFSET + 14)
> > +#define RZN1_FUNC_UART1_I_E
> 	(RZN1_FUNC_L2_OFFSET + 15)
> > +#define RZN1_FUNC_UART2_I
> 	(RZN1_FUNC_L2_OFFSET + 16)
> > +#define RZN1_FUNC_UART2_I_E
> 	(RZN1_FUNC_L2_OFFSET + 17)
> > +#define RZN1_FUNC_UART0
> 	(RZN1_FUNC_L2_OFFSET + 18)
> > +#define RZN1_FUNC_UART0_E
> 	(RZN1_FUNC_L2_OFFSET + 19)
> > +#define RZN1_FUNC_UART1
> 	(RZN1_FUNC_L2_OFFSET + 20)
> > +#define RZN1_FUNC_UART1_E
> 	(RZN1_FUNC_L2_OFFSET + 21)
> > +#define RZN1_FUNC_UART2
> 	(RZN1_FUNC_L2_OFFSET + 22)
> > +#define RZN1_FUNC_UART2_E
> 	(RZN1_FUNC_L2_OFFSET + 23)
> > +#define RZN1_FUNC_UART3
> 	(RZN1_FUNC_L2_OFFSET + 24)
> > +#define RZN1_FUNC_UART3_E
> 	(RZN1_FUNC_L2_OFFSET + 25)
> > +#define RZN1_FUNC_UART4
> 	(RZN1_FUNC_L2_OFFSET + 26)
> > +#define RZN1_FUNC_UART4_E
> 	(RZN1_FUNC_L2_OFFSET + 27)
> > +#define RZN1_FUNC_UART5
> 	(RZN1_FUNC_L2_OFFSET + 28)
> > +#define RZN1_FUNC_UART5_E
> 	(RZN1_FUNC_L2_OFFSET + 29)
> > +#define RZN1_FUNC_UART6
> 	(RZN1_FUNC_L2_OFFSET + 30)
> > +#define RZN1_FUNC_UART6_E
> 	(RZN1_FUNC_L2_OFFSET + 31)
> > +#define RZN1_FUNC_UART7
> 	(RZN1_FUNC_L2_OFFSET + 32)
> > +#define RZN1_FUNC_UART7_E
> 	(RZN1_FUNC_L2_OFFSET + 33)
> > +#define RZN1_FUNC_SPI0_M
> 	(RZN1_FUNC_L2_OFFSET + 34)
> > +#define RZN1_FUNC_SPI0_M_E
> 	(RZN1_FUNC_L2_OFFSET + 35)
> > +#define RZN1_FUNC_SPI1_M
> 	(RZN1_FUNC_L2_OFFSET + 36)
> > +#define RZN1_FUNC_SPI1_M_E
> 	(RZN1_FUNC_L2_OFFSET + 37)
> > +#define RZN1_FUNC_SPI2_M
> 	(RZN1_FUNC_L2_OFFSET + 38)
> > +#define RZN1_FUNC_SPI2_M_E
> 	(RZN1_FUNC_L2_OFFSET + 39)
> > +#define RZN1_FUNC_SPI3_M
> 	(RZN1_FUNC_L2_OFFSET + 40)
> > +#define RZN1_FUNC_SPI3_M_E
> 	(RZN1_FUNC_L2_OFFSET + 41)
> > +#define RZN1_FUNC_SPI4_S
> 	(RZN1_FUNC_L2_OFFSET + 42)
> > +#define RZN1_FUNC_SPI4_S_E
> 	(RZN1_FUNC_L2_OFFSET + 43)
> > +#define RZN1_FUNC_SPI5_S
> 	(RZN1_FUNC_L2_OFFSET + 44)
> > +#define RZN1_FUNC_SPI5_S_E
> 	(RZN1_FUNC_L2_OFFSET + 45)
> > +#define RZN1_FUNC_SGPIO0_M
> 	(RZN1_FUNC_L2_OFFSET + 46)
> > +#define RZN1_FUNC_SGPIO1_M
> 	(RZN1_FUNC_L2_OFFSET + 47)
> > +#define RZN1_FUNC_GPIO
> 	(RZN1_FUNC_L2_OFFSET + 48)
> > +#define RZN1_FUNC_CAN
> 	(RZN1_FUNC_L2_OFFSET + 49)
> > +#define RZN1_FUNC_I2C
> 	(RZN1_FUNC_L2_OFFSET + 50)
> > +#define RZN1_FUNC_SAFE
> 	(RZN1_FUNC_L2_OFFSET + 51)
> > +#define RZN1_FUNC_PTO_PWM
> 	(RZN1_FUNC_L2_OFFSET + 52)
> > +#define RZN1_FUNC_PTO_PWM1
> 	(RZN1_FUNC_L2_OFFSET + 53)
> > +#define RZN1_FUNC_PTO_PWM2
> 	(RZN1_FUNC_L2_OFFSET + 54)
> > +#define RZN1_FUNC_PTO_PWM3
> 	(RZN1_FUNC_L2_OFFSET + 55)
> > +#define RZN1_FUNC_PTO_PWM4
> 	(RZN1_FUNC_L2_OFFSET + 56)
> > +#define RZN1_FUNC_DELTA_SIGMA
> 	(RZN1_FUNC_L2_OFFSET + 57)
> > +#define RZN1_FUNC_SGPIO2_M
> 	(RZN1_FUNC_L2_OFFSET + 58)
> > +#define RZN1_FUNC_SGPIO3_M
> 	(RZN1_FUNC_L2_OFFSET + 59)
> > +#define RZN1_FUNC_SGPIO4_S
> 	(RZN1_FUNC_L2_OFFSET + 60)
> > +#define RZN1_FUNC_MAC_MTIP_SWITCH
> 	(RZN1_FUNC_L2_OFFSET + 61)
> > +
> > +#define RZN1_FUNC_MDIO_OFFSET
> 	(RZN1_FUNC_L2_OFFSET + 62)
> > +
> > +/* These are MDIO0 peripherals for the RZN1_FUNC_ETH_MDIO function
> */
> > +#define RZN1_FUNC_MDIO0_HIGHZ
> 	(RZN1_FUNC_MDIO_OFFSET + 0)
> > +#define RZN1_FUNC_MDIO0_GMAC0
> 	(RZN1_FUNC_MDIO_OFFSET + 1)
> > +#define RZN1_FUNC_MDIO0_GMAC1
> 	(RZN1_FUNC_MDIO_OFFSET + 2)
> > +#define RZN1_FUNC_MDIO0_ECAT
> 	(RZN1_FUNC_MDIO_OFFSET + 3)
> > +#define RZN1_FUNC_MDIO0_S3_MDIO0
> 	(RZN1_FUNC_MDIO_OFFSET + 4)
> > +#define RZN1_FUNC_MDIO0_S3_MDIO1
> 	(RZN1_FUNC_MDIO_OFFSET + 5)
> > +#define RZN1_FUNC_MDIO0_HWRTOS
> 	(RZN1_FUNC_MDIO_OFFSET + 6)
> > +#define RZN1_FUNC_MDIO0_SWITCH
> 	(RZN1_FUNC_MDIO_OFFSET + 7)
> > +/* These are MDIO0 peripherals for the RZN1_FUNC_ETH_MDIO_E1
> function */
> > +#define RZN1_FUNC_MDIO0_E1_HIGHZ
> 	(RZN1_FUNC_MDIO_OFFSET + 8)
> > +#define RZN1_FUNC_MDIO0_E1_GMAC0
> 	(RZN1_FUNC_MDIO_OFFSET + 9)
> > +#define RZN1_FUNC_MDIO0_E1_GMAC1
> 	(RZN1_FUNC_MDIO_OFFSET + 10)
> > +#define RZN1_FUNC_MDIO0_E1_ECAT
> 	(RZN1_FUNC_MDIO_OFFSET + 11)
> > +#define RZN1_FUNC_MDIO0_E1_S3_MDIO0
> 	(RZN1_FUNC_MDIO_OFFSET + 12)
> > +#define RZN1_FUNC_MDIO0_E1_S3_MDIO1
> 	(RZN1_FUNC_MDIO_OFFSET + 13)
> > +#define RZN1_FUNC_MDIO0_E1_HWRTOS
> 	(RZN1_FUNC_MDIO_OFFSET + 14)
> > +#define RZN1_FUNC_MDIO0_E1_SWITCH
> 	(RZN1_FUNC_MDIO_OFFSET + 15)
> > +
> > +/* These are MDIO1 peripherals for the RZN1_FUNC_ETH_MDIO function
> */
> > +#define RZN1_FUNC_MDIO1_HIGHZ
> 	(RZN1_FUNC_MDIO_OFFSET + 16)
> > +#define RZN1_FUNC_MDIO1_GMAC0
> 	(RZN1_FUNC_MDIO_OFFSET + 17)
> > +#define RZN1_FUNC_MDIO1_GMAC1
> 	(RZN1_FUNC_MDIO_OFFSET + 18)
> > +#define RZN1_FUNC_MDIO1_ECAT
> 	(RZN1_FUNC_MDIO_OFFSET + 19)
> > +#define RZN1_FUNC_MDIO1_S3_MDIO0
> 	(RZN1_FUNC_MDIO_OFFSET + 20)
> > +#define RZN1_FUNC_MDIO1_S3_MDIO1
> 	(RZN1_FUNC_MDIO_OFFSET + 21)
> > +#define RZN1_FUNC_MDIO1_HWRTOS
> 	(RZN1_FUNC_MDIO_OFFSET + 22)
> > +#define RZN1_FUNC_MDIO1_SWITCH
> 	(RZN1_FUNC_MDIO_OFFSET + 23)
> > +/* These are MDIO1 peripherals for the RZN1_FUNC_ETH_MDIO_E1
> function */
> > +#define RZN1_FUNC_MDIO1_E1_HIGHZ
> 	(RZN1_FUNC_MDIO_OFFSET + 24)
> > +#define RZN1_FUNC_MDIO1_E1_GMAC0
> 	(RZN1_FUNC_MDIO_OFFSET + 25)
> > +#define RZN1_FUNC_MDIO1_E1_GMAC1
> 	(RZN1_FUNC_MDIO_OFFSET + 26)
> > +#define RZN1_FUNC_MDIO1_E1_ECAT
> 	(RZN1_FUNC_MDIO_OFFSET + 27)
> > +#define RZN1_FUNC_MDIO1_E1_S3_MDIO0
> 	(RZN1_FUNC_MDIO_OFFSET + 28)
> > +#define RZN1_FUNC_MDIO1_E1_S3_MDIO1
> 	(RZN1_FUNC_MDIO_OFFSET + 29)
> > +#define RZN1_FUNC_MDIO1_E1_HWRTOS
> 	(RZN1_FUNC_MDIO_OFFSET + 30)
> > +#define RZN1_FUNC_MDIO1_E1_SWITCH
> 	(RZN1_FUNC_MDIO_OFFSET + 31)
> > +
> > +#define RZN1_FUNC_MAX
> 	(RZN1_FUNC_MDIO_OFFSET + 32)
> > +
> > +#endif /* __DT_BINDINGS_RZN1_PINCTRL_H */
> > --
> > 2.17.1
> >
Jacopo Mondi Sept. 18, 2018, 10:48 a.m. UTC | #3
Hi Phil,

On Tue, Sep 18, 2018 at 09:44:40AM +0000, Phil Edworthy wrote:
> Hi Jacopo,
>
> On 18 September 2018 10:27 jacopo mondi wrote:
> > Hi Phil,
> >    thanks for the update. This looks much better :)
> >
> > On Mon, Sep 17, 2018 at 05:36:07PM +0100, Phil Edworthy wrote:
> > > The Renesas RZ/N1 device family PINCTRL node description.
> > >
> > > Based on a patch originally written by Michel Pollet at Renesas.
> > >
> > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > > ---
> > > v3:
> > >  - Use standard bindings
> > >  - Change the way the functions are defined so it is easy to check
> > >    against the hardware numbering.
> > >  - Add functions for the MDIO source peripheral instead of using
> > >    virtual pins.
> > >
> > > v2:
> > >  - Change filename to generic rzn1, instead of device specific.
> > >  - Add "renesas,rzn1-pinctrl" compatible fallback string.
> > >  - Example register size corrected.
> > >  - Typos fixed.
> > >  - Changes suggested by Jacopo Mondi.
> > >  - rzn1-pinctrl.h squashed into this as requested by Rob Herring.
> > > ---
> > >  .../bindings/pinctrl/renesas,rzn1-pinctrl.txt | 129 ++++++++++++++++
> > >  include/dt-bindings/pinctrl/rzn1-pinctrl.h    | 141 ++++++++++++++++++
> > >  2 files changed, 270 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
> > >  create mode 100644 include/dt-bindings/pinctrl/rzn1-pinctrl.h
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
> > > b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
> > > new file mode 100644
> > > index 000000000000..203131ed8d2a
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.t
> > > +++ xt
> > > @@ -0,0 +1,129 @@
> > > +Renesas RZ/N1 SoC Pinctrl node description.
> > > +
> > > +Pin controller node
> > > +-------------------
> > > +Required properties:
> > > +- compatible: SoC-specific compatible string "renesas,<soc-specific>-
> > pinctrl"
> > > +  followed by "renesas,rzn1-pinctrl" as fallback. The SoC-specific
> > > +compatible
> > > +  strings must be one of:
> > > +	"renesas,r9a06g032-pinctrl" for RZ/N1D
> > > +	"renesas,r9a06g033-pinctrl" for RZ/N1S
> > > +- reg: Address base and length of the memory area where the pin
> > > +controller
> > > +  hardware is mapped to.
> > > +- clocks: phandles for the clock, see the description of clock-names below.
> > > +- clock-names: Contains the name of the clock:
> > > +    "bus", the bus clock, sometimes described as pclk, for register accesses.
> >
> > If that's the only clock, the clock name is optional. If you drop it, then please
> > mention that the only phandle in 'clocks' refers to the "bus" clock.
> The driver currently specifies the "bus" name when calling devm_clk_get(), so
> you need the clock-names.

well, you need them, because the driver implementation requries that,
and you implemented it that way :) I won't argue on something this
stupid though, what you have here is fine

> If other changes are required, I will change the driver and update the binding
> doc so they are not needed.
>
> > > +
> > > +Example:
> > > +	pinctrl: pin-controller@40067000 {
> > > +	    compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
> > > +	    reg = <0x40067000 0x1000>, <0x51000000 0x480>;
> > > +	    clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
> > > +	    clock-names = "bus";
> > > +	};
> > > +
> > > +Sub-nodes
> > > +---------
> > > +
> > > +The child nodes of the pin controller node describe a pin
> > > +multiplexing function or a GPIO controller alternatively.

You have no gpio-controller support, so no GPIO configuration
sub-nodes.

> > > +
> > > +- Pin multiplexing sub-nodes:
> > > +  A pin multiplexing sub-node describes how to configure a set of
> > > +  (or a single) pin in some desired alternate function mode.
> > > +  A single sub-node may define several pin configurations.
> > > +  Please refer to pinctrl-bindings.txt to get to know more on generic
> > > +  pin properties usage.
> > > +
> > > +  The allowed generic formats for a pin multiplexing sub-node are the
> > > + following ones:
> > > +
> > > +  node-1 {
> > > +      pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
> > > +      GENERIC_PINCONFIG;
> > > +  };
> > > +
> > > +  node-2 {
> > > +      sub-node-1 {
> > > +          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
> > > +          GENERIC_PINCONFIG;
> > > +      };
> > > +
> > > +      sub-node-2 {
> > > +          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
> > > +          GENERIC_PINCONFIG;
> > > +      };
> > > +
> > > +      ...
> > > +
> > > +      sub-node-n {
> > > +          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
> > > +          GENERIC_PINCONFIG;
> > > +      };
> > > +  };
> > > +
> > > +  Use the second format when pins part of the same logical group need
> > > + to have  different generic pin configuration flags applied.
> > > +
> > > +  Client sub-nodes shall refer to pin multiplexing sub-nodes using
> > > + the phandle  of the most external one.
> > > +
> > > +  Eg.
> > > +
> > > +  client-1 {
> > > +      ...
> > > +      pinctrl-0 = <&node-1>;
> > > +      ...
> > > +  };
> > > +
> > > +  client-2 {
> > > +      ...
> > > +      pinctrl-0 = <&node-2>;
> > > +      ...
> > > +  };
> > > +
> > > +  Required properties:
> > > +    - pinmux:
> > > +      integer array representing pin number and pin multiplexing
> > configuration.
> > > +      When a pin has to be configured in alternate function mode, use this
> > > +      property to identify the pin by its global index, and provide its
> > > +      alternate function configuration number along with it.
> > > +      When multiple pins are required to be configured as part of the same
> > > +      alternate function they shall be specified as members of the same
> > > +      argument list of a single "pinmux" property.
> > > +      Integers values in the "pinmux" argument list are assembled as:
> > > +      (PIN | MUX_FUNC << 8)
> > > +      where PIN directly corresponds to the pl_gpio pin number and
> > MUX_FUNC is
> > > +      one of the alternate function identifiers defined in:
> > > +      <include/dt-bindings/pinctrl/rzn1-pinctrl.h>
> >
> > You have a macro for assembling pin and mux functions, do you think it is
> > worth mentioning it here?
> Not sure it’s worth it, it's used in the examples anyway.
>
> > > +      These identifiers collapse the IO Multiplex Configuration Level 1 and
> > > +      Level 2 numbers that are detailed in the hardware reference manual
> > into a
> > > +      single number. The identifiers for Level 2 are simply offset by 10.
> > > +      Additional identifiers are provided to specify the MDIO source
> > peripheral.
> >
> > As we discussed offline, I don't see that much value in mentioning details
> > about the pinmuxing levels, as this is driver internal stuff that reflects on
> > which set of registers to use depending on the muxing 'level'. I understand
> > though that as the SoC manual mentions levels, you may want to refer to
> > them. Up to you....
> I'll leave it as is unless there are other comments.
>

I do, actually, after reviewing the driver too.
1) You should list which generic properties this peripheral supports.
2) The tiny GPIO controller thing mentioned above.

Thanks
   j

> > > +
> > > +  Example:
> > > +  A serial communication interface with a TX output pin and an RX input
> > pin.
> > > +
> > > +  &pinctrl {
> > > +	pins_uart0: pins_uart0 {
> > > +		pinmux = <
> > > +			RZN1_MUX(103, UART0_I)	/* UART0_TXD */
> > > +			RZN1_MUX(104, UART0_I)	/* UART0_RXD */
> > > +		>;
> > > +	};
> > > +  };
> > > +
> > > +  Example 2:
> > > +  Here we set the pull up on the RXD pin of the UART.
> > > +
> > > +  &pinctrl {
> > > +	pins_uart0: pins_uart0 {
> > > +		pins_uart6_tx {
> > > +			pinmux = <RZN1_MUX(103, UART0_I)>;	/*
> > UART0_TXD */
> > > +		};
> > > +		pins_uart6_rx {
> > > +			pinmux = <RZN1_MUX(104, UART0_I)>;	/*
> > UART0_RXD */
> > > +			bias-pull-up;
> > > +		};
> > > +	};
> > > +  };
> >
> > I like this version much more. With those minor issues clarified (up to you to
> > decide how to handle them) please add my:
> > Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
>
> Many thanks for your review!
> Phil
>
>
> > Cheers
> >    j
> >
> >
> > > diff --git a/include/dt-bindings/pinctrl/rzn1-pinctrl.h
> > > b/include/dt-bindings/pinctrl/rzn1-pinctrl.h
> > > new file mode 100644
> > > index 000000000000..40369ee36e6a
> > > --- /dev/null
> > > +++ b/include/dt-bindings/pinctrl/rzn1-pinctrl.h
> > > @@ -0,0 +1,141 @@
> > > +/* SPDX-License-Identifier: GPL-2.0 */
> > > +/*
> > > + * Defines macros and constants for Renesas RZ/N1 pin controller pin
> > > + * muxing functions.
> > > + */
> > > +#ifndef __DT_BINDINGS_RZN1_PINCTRL_H
> > > +#define __DT_BINDINGS_RZN1_PINCTRL_H
> > > +
> > > +#define RZN1_MUX(_gpio, _func) \
> > > +	(((RZN1_FUNC_##_func) << 8) | (_gpio))
> > > +
> > > +/*
> > > + * Given the different levels of muxing on the SoC, it was decided to
> > > + * 'linearize' them into one numerical space. So mux level 1, 2 and
> > > +the MDIO
> > > + * muxes are all represented by one single value.
> > > + *
> > > + * You can derive the hardware value pretty easily too, as
> > > + * 0...9   are Level 1
> > > + * 10...71 are Level 2. The Level 2 mux will be set to this
> > > + *         value - RZN1_FUNC_L2_OFFSET, and the Level 1 mux will be
> > > + *         set accordingly.
> > > + * 72...103 are for the 2 MDIO muxes.
> > > + */
> > > +#define RZN1_FUNC_HIGHZ				0
> > > +#define RZN1_FUNC_0L				1
> > > +#define RZN1_FUNC_CLK_ETH_MII_RGMII_RMII	2
> > > +#define RZN1_FUNC_CLK_ETH_NAND			3
> > > +#define RZN1_FUNC_QSPI				4
> > > +#define RZN1_FUNC_SDIO				5
> > > +#define RZN1_FUNC_LCD				6
> > > +#define RZN1_FUNC_LCD_E				7
> > > +#define RZN1_FUNC_MSEBIM			8
> > > +#define RZN1_FUNC_MSEBIS			9
> > > +#define RZN1_FUNC_L2_OFFSET			10	/* I'm Special
> > */
> > > +
> > > +#define RZN1_FUNC_HIGHZ1
> > 	(RZN1_FUNC_L2_OFFSET + 0)
> > > +#define RZN1_FUNC_ETHERCAT
> > 	(RZN1_FUNC_L2_OFFSET + 1)
> > > +#define RZN1_FUNC_SERCOS3
> > 	(RZN1_FUNC_L2_OFFSET + 2)
> > > +#define RZN1_FUNC_SDIO_E
> > 	(RZN1_FUNC_L2_OFFSET + 3)
> > > +#define RZN1_FUNC_ETH_MDIO
> > 	(RZN1_FUNC_L2_OFFSET + 4)
> > > +#define RZN1_FUNC_ETH_MDIO_E1
> > 	(RZN1_FUNC_L2_OFFSET + 5)
> > > +#define RZN1_FUNC_USB
> > 	(RZN1_FUNC_L2_OFFSET + 6)
> > > +#define RZN1_FUNC_MSEBIM_E
> > 	(RZN1_FUNC_L2_OFFSET + 7)
> > > +#define RZN1_FUNC_MSEBIS_E
> > 	(RZN1_FUNC_L2_OFFSET + 8)
> > > +#define RZN1_FUNC_RSV
> > 	(RZN1_FUNC_L2_OFFSET + 9)
> > > +#define RZN1_FUNC_RSV_E
> > 	(RZN1_FUNC_L2_OFFSET + 10)
> > > +#define RZN1_FUNC_RSV_E1
> > 	(RZN1_FUNC_L2_OFFSET + 11)
> > > +#define RZN1_FUNC_UART0_I
> > 	(RZN1_FUNC_L2_OFFSET + 12)
> > > +#define RZN1_FUNC_UART0_I_E
> > 	(RZN1_FUNC_L2_OFFSET + 13)
> > > +#define RZN1_FUNC_UART1_I
> > 	(RZN1_FUNC_L2_OFFSET + 14)
> > > +#define RZN1_FUNC_UART1_I_E
> > 	(RZN1_FUNC_L2_OFFSET + 15)
> > > +#define RZN1_FUNC_UART2_I
> > 	(RZN1_FUNC_L2_OFFSET + 16)
> > > +#define RZN1_FUNC_UART2_I_E
> > 	(RZN1_FUNC_L2_OFFSET + 17)
> > > +#define RZN1_FUNC_UART0
> > 	(RZN1_FUNC_L2_OFFSET + 18)
> > > +#define RZN1_FUNC_UART0_E
> > 	(RZN1_FUNC_L2_OFFSET + 19)
> > > +#define RZN1_FUNC_UART1
> > 	(RZN1_FUNC_L2_OFFSET + 20)
> > > +#define RZN1_FUNC_UART1_E
> > 	(RZN1_FUNC_L2_OFFSET + 21)
> > > +#define RZN1_FUNC_UART2
> > 	(RZN1_FUNC_L2_OFFSET + 22)
> > > +#define RZN1_FUNC_UART2_E
> > 	(RZN1_FUNC_L2_OFFSET + 23)
> > > +#define RZN1_FUNC_UART3
> > 	(RZN1_FUNC_L2_OFFSET + 24)
> > > +#define RZN1_FUNC_UART3_E
> > 	(RZN1_FUNC_L2_OFFSET + 25)
> > > +#define RZN1_FUNC_UART4
> > 	(RZN1_FUNC_L2_OFFSET + 26)
> > > +#define RZN1_FUNC_UART4_E
> > 	(RZN1_FUNC_L2_OFFSET + 27)
> > > +#define RZN1_FUNC_UART5
> > 	(RZN1_FUNC_L2_OFFSET + 28)
> > > +#define RZN1_FUNC_UART5_E
> > 	(RZN1_FUNC_L2_OFFSET + 29)
> > > +#define RZN1_FUNC_UART6
> > 	(RZN1_FUNC_L2_OFFSET + 30)
> > > +#define RZN1_FUNC_UART6_E
> > 	(RZN1_FUNC_L2_OFFSET + 31)
> > > +#define RZN1_FUNC_UART7
> > 	(RZN1_FUNC_L2_OFFSET + 32)
> > > +#define RZN1_FUNC_UART7_E
> > 	(RZN1_FUNC_L2_OFFSET + 33)
> > > +#define RZN1_FUNC_SPI0_M
> > 	(RZN1_FUNC_L2_OFFSET + 34)
> > > +#define RZN1_FUNC_SPI0_M_E
> > 	(RZN1_FUNC_L2_OFFSET + 35)
> > > +#define RZN1_FUNC_SPI1_M
> > 	(RZN1_FUNC_L2_OFFSET + 36)
> > > +#define RZN1_FUNC_SPI1_M_E
> > 	(RZN1_FUNC_L2_OFFSET + 37)
> > > +#define RZN1_FUNC_SPI2_M
> > 	(RZN1_FUNC_L2_OFFSET + 38)
> > > +#define RZN1_FUNC_SPI2_M_E
> > 	(RZN1_FUNC_L2_OFFSET + 39)
> > > +#define RZN1_FUNC_SPI3_M
> > 	(RZN1_FUNC_L2_OFFSET + 40)
> > > +#define RZN1_FUNC_SPI3_M_E
> > 	(RZN1_FUNC_L2_OFFSET + 41)
> > > +#define RZN1_FUNC_SPI4_S
> > 	(RZN1_FUNC_L2_OFFSET + 42)
> > > +#define RZN1_FUNC_SPI4_S_E
> > 	(RZN1_FUNC_L2_OFFSET + 43)
> > > +#define RZN1_FUNC_SPI5_S
> > 	(RZN1_FUNC_L2_OFFSET + 44)
> > > +#define RZN1_FUNC_SPI5_S_E
> > 	(RZN1_FUNC_L2_OFFSET + 45)
> > > +#define RZN1_FUNC_SGPIO0_M
> > 	(RZN1_FUNC_L2_OFFSET + 46)
> > > +#define RZN1_FUNC_SGPIO1_M
> > 	(RZN1_FUNC_L2_OFFSET + 47)
> > > +#define RZN1_FUNC_GPIO
> > 	(RZN1_FUNC_L2_OFFSET + 48)
> > > +#define RZN1_FUNC_CAN
> > 	(RZN1_FUNC_L2_OFFSET + 49)
> > > +#define RZN1_FUNC_I2C
> > 	(RZN1_FUNC_L2_OFFSET + 50)
> > > +#define RZN1_FUNC_SAFE
> > 	(RZN1_FUNC_L2_OFFSET + 51)
> > > +#define RZN1_FUNC_PTO_PWM
> > 	(RZN1_FUNC_L2_OFFSET + 52)
> > > +#define RZN1_FUNC_PTO_PWM1
> > 	(RZN1_FUNC_L2_OFFSET + 53)
> > > +#define RZN1_FUNC_PTO_PWM2
> > 	(RZN1_FUNC_L2_OFFSET + 54)
> > > +#define RZN1_FUNC_PTO_PWM3
> > 	(RZN1_FUNC_L2_OFFSET + 55)
> > > +#define RZN1_FUNC_PTO_PWM4
> > 	(RZN1_FUNC_L2_OFFSET + 56)
> > > +#define RZN1_FUNC_DELTA_SIGMA
> > 	(RZN1_FUNC_L2_OFFSET + 57)
> > > +#define RZN1_FUNC_SGPIO2_M
> > 	(RZN1_FUNC_L2_OFFSET + 58)
> > > +#define RZN1_FUNC_SGPIO3_M
> > 	(RZN1_FUNC_L2_OFFSET + 59)
> > > +#define RZN1_FUNC_SGPIO4_S
> > 	(RZN1_FUNC_L2_OFFSET + 60)
> > > +#define RZN1_FUNC_MAC_MTIP_SWITCH
> > 	(RZN1_FUNC_L2_OFFSET + 61)
> > > +
> > > +#define RZN1_FUNC_MDIO_OFFSET
> > 	(RZN1_FUNC_L2_OFFSET + 62)
> > > +
> > > +/* These are MDIO0 peripherals for the RZN1_FUNC_ETH_MDIO function
> > */
> > > +#define RZN1_FUNC_MDIO0_HIGHZ
> > 	(RZN1_FUNC_MDIO_OFFSET + 0)
> > > +#define RZN1_FUNC_MDIO0_GMAC0
> > 	(RZN1_FUNC_MDIO_OFFSET + 1)
> > > +#define RZN1_FUNC_MDIO0_GMAC1
> > 	(RZN1_FUNC_MDIO_OFFSET + 2)
> > > +#define RZN1_FUNC_MDIO0_ECAT
> > 	(RZN1_FUNC_MDIO_OFFSET + 3)
> > > +#define RZN1_FUNC_MDIO0_S3_MDIO0
> > 	(RZN1_FUNC_MDIO_OFFSET + 4)
> > > +#define RZN1_FUNC_MDIO0_S3_MDIO1
> > 	(RZN1_FUNC_MDIO_OFFSET + 5)
> > > +#define RZN1_FUNC_MDIO0_HWRTOS
> > 	(RZN1_FUNC_MDIO_OFFSET + 6)
> > > +#define RZN1_FUNC_MDIO0_SWITCH
> > 	(RZN1_FUNC_MDIO_OFFSET + 7)
> > > +/* These are MDIO0 peripherals for the RZN1_FUNC_ETH_MDIO_E1
> > function */
> > > +#define RZN1_FUNC_MDIO0_E1_HIGHZ
> > 	(RZN1_FUNC_MDIO_OFFSET + 8)
> > > +#define RZN1_FUNC_MDIO0_E1_GMAC0
> > 	(RZN1_FUNC_MDIO_OFFSET + 9)
> > > +#define RZN1_FUNC_MDIO0_E1_GMAC1
> > 	(RZN1_FUNC_MDIO_OFFSET + 10)
> > > +#define RZN1_FUNC_MDIO0_E1_ECAT
> > 	(RZN1_FUNC_MDIO_OFFSET + 11)
> > > +#define RZN1_FUNC_MDIO0_E1_S3_MDIO0
> > 	(RZN1_FUNC_MDIO_OFFSET + 12)
> > > +#define RZN1_FUNC_MDIO0_E1_S3_MDIO1
> > 	(RZN1_FUNC_MDIO_OFFSET + 13)
> > > +#define RZN1_FUNC_MDIO0_E1_HWRTOS
> > 	(RZN1_FUNC_MDIO_OFFSET + 14)
> > > +#define RZN1_FUNC_MDIO0_E1_SWITCH
> > 	(RZN1_FUNC_MDIO_OFFSET + 15)
> > > +
> > > +/* These are MDIO1 peripherals for the RZN1_FUNC_ETH_MDIO function
> > */
> > > +#define RZN1_FUNC_MDIO1_HIGHZ
> > 	(RZN1_FUNC_MDIO_OFFSET + 16)
> > > +#define RZN1_FUNC_MDIO1_GMAC0
> > 	(RZN1_FUNC_MDIO_OFFSET + 17)
> > > +#define RZN1_FUNC_MDIO1_GMAC1
> > 	(RZN1_FUNC_MDIO_OFFSET + 18)
> > > +#define RZN1_FUNC_MDIO1_ECAT
> > 	(RZN1_FUNC_MDIO_OFFSET + 19)
> > > +#define RZN1_FUNC_MDIO1_S3_MDIO0
> > 	(RZN1_FUNC_MDIO_OFFSET + 20)
> > > +#define RZN1_FUNC_MDIO1_S3_MDIO1
> > 	(RZN1_FUNC_MDIO_OFFSET + 21)
> > > +#define RZN1_FUNC_MDIO1_HWRTOS
> > 	(RZN1_FUNC_MDIO_OFFSET + 22)
> > > +#define RZN1_FUNC_MDIO1_SWITCH
> > 	(RZN1_FUNC_MDIO_OFFSET + 23)
> > > +/* These are MDIO1 peripherals for the RZN1_FUNC_ETH_MDIO_E1
> > function */
> > > +#define RZN1_FUNC_MDIO1_E1_HIGHZ
> > 	(RZN1_FUNC_MDIO_OFFSET + 24)
> > > +#define RZN1_FUNC_MDIO1_E1_GMAC0
> > 	(RZN1_FUNC_MDIO_OFFSET + 25)
> > > +#define RZN1_FUNC_MDIO1_E1_GMAC1
> > 	(RZN1_FUNC_MDIO_OFFSET + 26)
> > > +#define RZN1_FUNC_MDIO1_E1_ECAT
> > 	(RZN1_FUNC_MDIO_OFFSET + 27)
> > > +#define RZN1_FUNC_MDIO1_E1_S3_MDIO0
> > 	(RZN1_FUNC_MDIO_OFFSET + 28)
> > > +#define RZN1_FUNC_MDIO1_E1_S3_MDIO1
> > 	(RZN1_FUNC_MDIO_OFFSET + 29)
> > > +#define RZN1_FUNC_MDIO1_E1_HWRTOS
> > 	(RZN1_FUNC_MDIO_OFFSET + 30)
> > > +#define RZN1_FUNC_MDIO1_E1_SWITCH
> > 	(RZN1_FUNC_MDIO_OFFSET + 31)
> > > +
> > > +#define RZN1_FUNC_MAX
> > 	(RZN1_FUNC_MDIO_OFFSET + 32)
> > > +
> > > +#endif /* __DT_BINDINGS_RZN1_PINCTRL_H */
> > > --
> > > 2.17.1
> > >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
new file mode 100644
index 000000000000..203131ed8d2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
@@ -0,0 +1,129 @@ 
+Renesas RZ/N1 SoC Pinctrl node description.
+
+Pin controller node
+-------------------
+Required properties:
+- compatible: SoC-specific compatible string "renesas,<soc-specific>-pinctrl"
+  followed by "renesas,rzn1-pinctrl" as fallback. The SoC-specific compatible
+  strings must be one of:
+	"renesas,r9a06g032-pinctrl" for RZ/N1D
+	"renesas,r9a06g033-pinctrl" for RZ/N1S
+- reg: Address base and length of the memory area where the pin controller
+  hardware is mapped to.
+- clocks: phandles for the clock, see the description of clock-names below.
+- clock-names: Contains the name of the clock:
+    "bus", the bus clock, sometimes described as pclk, for register accesses.
+
+Example:
+	pinctrl: pin-controller@40067000 {
+	    compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
+	    reg = <0x40067000 0x1000>, <0x51000000 0x480>;
+	    clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
+	    clock-names = "bus";
+	};
+
+Sub-nodes
+---------
+
+The child nodes of the pin controller node describe a pin multiplexing
+function or a GPIO controller alternatively.
+
+- Pin multiplexing sub-nodes:
+  A pin multiplexing sub-node describes how to configure a set of
+  (or a single) pin in some desired alternate function mode.
+  A single sub-node may define several pin configurations.
+  Please refer to pinctrl-bindings.txt to get to know more on generic
+  pin properties usage.
+
+  The allowed generic formats for a pin multiplexing sub-node are the
+  following ones:
+
+  node-1 {
+      pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+      GENERIC_PINCONFIG;
+  };
+
+  node-2 {
+      sub-node-1 {
+          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+          GENERIC_PINCONFIG;
+      };
+
+      sub-node-2 {
+          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+          GENERIC_PINCONFIG;
+      };
+
+      ...
+
+      sub-node-n {
+          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+          GENERIC_PINCONFIG;
+      };
+  };
+
+  Use the second format when pins part of the same logical group need to have
+  different generic pin configuration flags applied.
+
+  Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle
+  of the most external one.
+
+  Eg.
+
+  client-1 {
+      ...
+      pinctrl-0 = <&node-1>;
+      ...
+  };
+
+  client-2 {
+      ...
+      pinctrl-0 = <&node-2>;
+      ...
+  };
+
+  Required properties:
+    - pinmux:
+      integer array representing pin number and pin multiplexing configuration.
+      When a pin has to be configured in alternate function mode, use this
+      property to identify the pin by its global index, and provide its
+      alternate function configuration number along with it.
+      When multiple pins are required to be configured as part of the same
+      alternate function they shall be specified as members of the same
+      argument list of a single "pinmux" property.
+      Integers values in the "pinmux" argument list are assembled as:
+      (PIN | MUX_FUNC << 8)
+      where PIN directly corresponds to the pl_gpio pin number and MUX_FUNC is
+      one of the alternate function identifiers defined in:
+      <include/dt-bindings/pinctrl/rzn1-pinctrl.h>
+      These identifiers collapse the IO Multiplex Configuration Level 1 and
+      Level 2 numbers that are detailed in the hardware reference manual into a
+      single number. The identifiers for Level 2 are simply offset by 10.
+      Additional identifiers are provided to specify the MDIO source peripheral.
+
+  Example:
+  A serial communication interface with a TX output pin and an RX input pin.
+
+  &pinctrl {
+	pins_uart0: pins_uart0 {
+		pinmux = <
+			RZN1_MUX(103, UART0_I)	/* UART0_TXD */
+			RZN1_MUX(104, UART0_I)	/* UART0_RXD */
+		>;
+	};
+  };
+
+  Example 2:
+  Here we set the pull up on the RXD pin of the UART.
+
+  &pinctrl {
+	pins_uart0: pins_uart0 {
+		pins_uart6_tx {
+			pinmux = <RZN1_MUX(103, UART0_I)>;	/* UART0_TXD */
+		};
+		pins_uart6_rx {
+			pinmux = <RZN1_MUX(104, UART0_I)>;	/* UART0_RXD */
+			bias-pull-up;
+		};
+	};
+  };
diff --git a/include/dt-bindings/pinctrl/rzn1-pinctrl.h b/include/dt-bindings/pinctrl/rzn1-pinctrl.h
new file mode 100644
index 000000000000..40369ee36e6a
--- /dev/null
+++ b/include/dt-bindings/pinctrl/rzn1-pinctrl.h
@@ -0,0 +1,141 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Defines macros and constants for Renesas RZ/N1 pin controller pin
+ * muxing functions.
+ */
+#ifndef __DT_BINDINGS_RZN1_PINCTRL_H
+#define __DT_BINDINGS_RZN1_PINCTRL_H
+
+#define RZN1_MUX(_gpio, _func) \
+	(((RZN1_FUNC_##_func) << 8) | (_gpio))
+
+/*
+ * Given the different levels of muxing on the SoC, it was decided to
+ * 'linearize' them into one numerical space. So mux level 1, 2 and the MDIO
+ * muxes are all represented by one single value.
+ *
+ * You can derive the hardware value pretty easily too, as
+ * 0...9   are Level 1
+ * 10...71 are Level 2. The Level 2 mux will be set to this
+ *         value - RZN1_FUNC_L2_OFFSET, and the Level 1 mux will be
+ *         set accordingly.
+ * 72...103 are for the 2 MDIO muxes.
+ */
+#define RZN1_FUNC_HIGHZ				0
+#define RZN1_FUNC_0L				1
+#define RZN1_FUNC_CLK_ETH_MII_RGMII_RMII	2
+#define RZN1_FUNC_CLK_ETH_NAND			3
+#define RZN1_FUNC_QSPI				4
+#define RZN1_FUNC_SDIO				5
+#define RZN1_FUNC_LCD				6
+#define RZN1_FUNC_LCD_E				7
+#define RZN1_FUNC_MSEBIM			8
+#define RZN1_FUNC_MSEBIS			9
+#define RZN1_FUNC_L2_OFFSET			10	/* I'm Special */
+
+#define RZN1_FUNC_HIGHZ1			(RZN1_FUNC_L2_OFFSET + 0)
+#define RZN1_FUNC_ETHERCAT			(RZN1_FUNC_L2_OFFSET + 1)
+#define RZN1_FUNC_SERCOS3			(RZN1_FUNC_L2_OFFSET + 2)
+#define RZN1_FUNC_SDIO_E			(RZN1_FUNC_L2_OFFSET + 3)
+#define RZN1_FUNC_ETH_MDIO			(RZN1_FUNC_L2_OFFSET + 4)
+#define RZN1_FUNC_ETH_MDIO_E1			(RZN1_FUNC_L2_OFFSET + 5)
+#define RZN1_FUNC_USB				(RZN1_FUNC_L2_OFFSET + 6)
+#define RZN1_FUNC_MSEBIM_E			(RZN1_FUNC_L2_OFFSET + 7)
+#define RZN1_FUNC_MSEBIS_E			(RZN1_FUNC_L2_OFFSET + 8)
+#define RZN1_FUNC_RSV				(RZN1_FUNC_L2_OFFSET + 9)
+#define RZN1_FUNC_RSV_E				(RZN1_FUNC_L2_OFFSET + 10)
+#define RZN1_FUNC_RSV_E1			(RZN1_FUNC_L2_OFFSET + 11)
+#define RZN1_FUNC_UART0_I			(RZN1_FUNC_L2_OFFSET + 12)
+#define RZN1_FUNC_UART0_I_E			(RZN1_FUNC_L2_OFFSET + 13)
+#define RZN1_FUNC_UART1_I			(RZN1_FUNC_L2_OFFSET + 14)
+#define RZN1_FUNC_UART1_I_E			(RZN1_FUNC_L2_OFFSET + 15)
+#define RZN1_FUNC_UART2_I			(RZN1_FUNC_L2_OFFSET + 16)
+#define RZN1_FUNC_UART2_I_E			(RZN1_FUNC_L2_OFFSET + 17)
+#define RZN1_FUNC_UART0				(RZN1_FUNC_L2_OFFSET + 18)
+#define RZN1_FUNC_UART0_E			(RZN1_FUNC_L2_OFFSET + 19)
+#define RZN1_FUNC_UART1				(RZN1_FUNC_L2_OFFSET + 20)
+#define RZN1_FUNC_UART1_E			(RZN1_FUNC_L2_OFFSET + 21)
+#define RZN1_FUNC_UART2				(RZN1_FUNC_L2_OFFSET + 22)
+#define RZN1_FUNC_UART2_E			(RZN1_FUNC_L2_OFFSET + 23)
+#define RZN1_FUNC_UART3				(RZN1_FUNC_L2_OFFSET + 24)
+#define RZN1_FUNC_UART3_E			(RZN1_FUNC_L2_OFFSET + 25)
+#define RZN1_FUNC_UART4				(RZN1_FUNC_L2_OFFSET + 26)
+#define RZN1_FUNC_UART4_E			(RZN1_FUNC_L2_OFFSET + 27)
+#define RZN1_FUNC_UART5				(RZN1_FUNC_L2_OFFSET + 28)
+#define RZN1_FUNC_UART5_E			(RZN1_FUNC_L2_OFFSET + 29)
+#define RZN1_FUNC_UART6				(RZN1_FUNC_L2_OFFSET + 30)
+#define RZN1_FUNC_UART6_E			(RZN1_FUNC_L2_OFFSET + 31)
+#define RZN1_FUNC_UART7				(RZN1_FUNC_L2_OFFSET + 32)
+#define RZN1_FUNC_UART7_E			(RZN1_FUNC_L2_OFFSET + 33)
+#define RZN1_FUNC_SPI0_M			(RZN1_FUNC_L2_OFFSET + 34)
+#define RZN1_FUNC_SPI0_M_E			(RZN1_FUNC_L2_OFFSET + 35)
+#define RZN1_FUNC_SPI1_M			(RZN1_FUNC_L2_OFFSET + 36)
+#define RZN1_FUNC_SPI1_M_E			(RZN1_FUNC_L2_OFFSET + 37)
+#define RZN1_FUNC_SPI2_M			(RZN1_FUNC_L2_OFFSET + 38)
+#define RZN1_FUNC_SPI2_M_E			(RZN1_FUNC_L2_OFFSET + 39)
+#define RZN1_FUNC_SPI3_M			(RZN1_FUNC_L2_OFFSET + 40)
+#define RZN1_FUNC_SPI3_M_E			(RZN1_FUNC_L2_OFFSET + 41)
+#define RZN1_FUNC_SPI4_S			(RZN1_FUNC_L2_OFFSET + 42)
+#define RZN1_FUNC_SPI4_S_E			(RZN1_FUNC_L2_OFFSET + 43)
+#define RZN1_FUNC_SPI5_S			(RZN1_FUNC_L2_OFFSET + 44)
+#define RZN1_FUNC_SPI5_S_E			(RZN1_FUNC_L2_OFFSET + 45)
+#define RZN1_FUNC_SGPIO0_M			(RZN1_FUNC_L2_OFFSET + 46)
+#define RZN1_FUNC_SGPIO1_M			(RZN1_FUNC_L2_OFFSET + 47)
+#define RZN1_FUNC_GPIO				(RZN1_FUNC_L2_OFFSET + 48)
+#define RZN1_FUNC_CAN				(RZN1_FUNC_L2_OFFSET + 49)
+#define RZN1_FUNC_I2C				(RZN1_FUNC_L2_OFFSET + 50)
+#define RZN1_FUNC_SAFE				(RZN1_FUNC_L2_OFFSET + 51)
+#define RZN1_FUNC_PTO_PWM			(RZN1_FUNC_L2_OFFSET + 52)
+#define RZN1_FUNC_PTO_PWM1			(RZN1_FUNC_L2_OFFSET + 53)
+#define RZN1_FUNC_PTO_PWM2			(RZN1_FUNC_L2_OFFSET + 54)
+#define RZN1_FUNC_PTO_PWM3			(RZN1_FUNC_L2_OFFSET + 55)
+#define RZN1_FUNC_PTO_PWM4			(RZN1_FUNC_L2_OFFSET + 56)
+#define RZN1_FUNC_DELTA_SIGMA			(RZN1_FUNC_L2_OFFSET + 57)
+#define RZN1_FUNC_SGPIO2_M			(RZN1_FUNC_L2_OFFSET + 58)
+#define RZN1_FUNC_SGPIO3_M			(RZN1_FUNC_L2_OFFSET + 59)
+#define RZN1_FUNC_SGPIO4_S			(RZN1_FUNC_L2_OFFSET + 60)
+#define RZN1_FUNC_MAC_MTIP_SWITCH		(RZN1_FUNC_L2_OFFSET + 61)
+
+#define RZN1_FUNC_MDIO_OFFSET			(RZN1_FUNC_L2_OFFSET + 62)
+
+/* These are MDIO0 peripherals for the RZN1_FUNC_ETH_MDIO function */
+#define RZN1_FUNC_MDIO0_HIGHZ			(RZN1_FUNC_MDIO_OFFSET + 0)
+#define RZN1_FUNC_MDIO0_GMAC0			(RZN1_FUNC_MDIO_OFFSET + 1)
+#define RZN1_FUNC_MDIO0_GMAC1			(RZN1_FUNC_MDIO_OFFSET + 2)
+#define RZN1_FUNC_MDIO0_ECAT			(RZN1_FUNC_MDIO_OFFSET + 3)
+#define RZN1_FUNC_MDIO0_S3_MDIO0		(RZN1_FUNC_MDIO_OFFSET + 4)
+#define RZN1_FUNC_MDIO0_S3_MDIO1		(RZN1_FUNC_MDIO_OFFSET + 5)
+#define RZN1_FUNC_MDIO0_HWRTOS			(RZN1_FUNC_MDIO_OFFSET + 6)
+#define RZN1_FUNC_MDIO0_SWITCH			(RZN1_FUNC_MDIO_OFFSET + 7)
+/* These are MDIO0 peripherals for the RZN1_FUNC_ETH_MDIO_E1 function */
+#define RZN1_FUNC_MDIO0_E1_HIGHZ		(RZN1_FUNC_MDIO_OFFSET + 8)
+#define RZN1_FUNC_MDIO0_E1_GMAC0		(RZN1_FUNC_MDIO_OFFSET + 9)
+#define RZN1_FUNC_MDIO0_E1_GMAC1		(RZN1_FUNC_MDIO_OFFSET + 10)
+#define RZN1_FUNC_MDIO0_E1_ECAT			(RZN1_FUNC_MDIO_OFFSET + 11)
+#define RZN1_FUNC_MDIO0_E1_S3_MDIO0		(RZN1_FUNC_MDIO_OFFSET + 12)
+#define RZN1_FUNC_MDIO0_E1_S3_MDIO1		(RZN1_FUNC_MDIO_OFFSET + 13)
+#define RZN1_FUNC_MDIO0_E1_HWRTOS		(RZN1_FUNC_MDIO_OFFSET + 14)
+#define RZN1_FUNC_MDIO0_E1_SWITCH		(RZN1_FUNC_MDIO_OFFSET + 15)
+
+/* These are MDIO1 peripherals for the RZN1_FUNC_ETH_MDIO function */
+#define RZN1_FUNC_MDIO1_HIGHZ			(RZN1_FUNC_MDIO_OFFSET + 16)
+#define RZN1_FUNC_MDIO1_GMAC0			(RZN1_FUNC_MDIO_OFFSET + 17)
+#define RZN1_FUNC_MDIO1_GMAC1			(RZN1_FUNC_MDIO_OFFSET + 18)
+#define RZN1_FUNC_MDIO1_ECAT			(RZN1_FUNC_MDIO_OFFSET + 19)
+#define RZN1_FUNC_MDIO1_S3_MDIO0		(RZN1_FUNC_MDIO_OFFSET + 20)
+#define RZN1_FUNC_MDIO1_S3_MDIO1		(RZN1_FUNC_MDIO_OFFSET + 21)
+#define RZN1_FUNC_MDIO1_HWRTOS			(RZN1_FUNC_MDIO_OFFSET + 22)
+#define RZN1_FUNC_MDIO1_SWITCH			(RZN1_FUNC_MDIO_OFFSET + 23)
+/* These are MDIO1 peripherals for the RZN1_FUNC_ETH_MDIO_E1 function */
+#define RZN1_FUNC_MDIO1_E1_HIGHZ		(RZN1_FUNC_MDIO_OFFSET + 24)
+#define RZN1_FUNC_MDIO1_E1_GMAC0		(RZN1_FUNC_MDIO_OFFSET + 25)
+#define RZN1_FUNC_MDIO1_E1_GMAC1		(RZN1_FUNC_MDIO_OFFSET + 26)
+#define RZN1_FUNC_MDIO1_E1_ECAT			(RZN1_FUNC_MDIO_OFFSET + 27)
+#define RZN1_FUNC_MDIO1_E1_S3_MDIO0		(RZN1_FUNC_MDIO_OFFSET + 28)
+#define RZN1_FUNC_MDIO1_E1_S3_MDIO1		(RZN1_FUNC_MDIO_OFFSET + 29)
+#define RZN1_FUNC_MDIO1_E1_HWRTOS		(RZN1_FUNC_MDIO_OFFSET + 30)
+#define RZN1_FUNC_MDIO1_E1_SWITCH		(RZN1_FUNC_MDIO_OFFSET + 31)
+
+#define RZN1_FUNC_MAX				(RZN1_FUNC_MDIO_OFFSET + 32)
+
+#endif /* __DT_BINDINGS_RZN1_PINCTRL_H */