From patchwork Thu Nov 15 01:40:35 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Chris Brandt X-Patchwork-Id: 10683423 X-Patchwork-Delegate: geert@linux-m68k.org Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id D284B13BB for ; Thu, 15 Nov 2018 01:45:56 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id BCA1C2875E for ; Thu, 15 Nov 2018 01:45:56 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id B10082BFEE; Thu, 15 Nov 2018 01:45:56 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 1932A2875E for ; Thu, 15 Nov 2018 01:45:56 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726811AbeKOLvk (ORCPT ); Thu, 15 Nov 2018 06:51:40 -0500 Received: from relmlor2.renesas.com ([210.160.252.172]:21998 "EHLO relmlie6.idc.renesas.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1726480AbeKOLvk (ORCPT ); Thu, 15 Nov 2018 06:51:40 -0500 Received: from unknown (HELO relmlir3.idc.renesas.com) ([10.200.68.153]) by relmlie6.idc.renesas.com with ESMTP; 15 Nov 2018 10:40:51 +0900 Received: from relmlii1.idc.renesas.com (relmlii1.idc.renesas.com [10.200.68.65]) by relmlir3.idc.renesas.com (Postfix) with ESMTP id 5DF27D3BC0; Thu, 15 Nov 2018 10:40:51 +0900 (JST) X-IronPort-AV: E=Sophos;i="5.56,234,1539615600"; d="scan'208";a="295921587" Received: from unknown (HELO rtamta01.rta.renesas.com) ([143.103.48.75]) by relmlii1.idc.renesas.com with ESMTP; 15 Nov 2018 10:40:50 +0900 Received: from ubuntu.localdomain (unknown [143.103.58.162]) by rtamta01.rta.renesas.com (Postfix) with ESMTP id A8BAC1DC; Thu, 15 Nov 2018 01:40:44 +0000 (UTC) From: Chris Brandt To: Linus Walleij , Rob Herring , Mark Rutland , Geert Uytterhoeven Cc: jacopo mondi , linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Chris Brandt Subject: [PATCH v5 2/2] dt-bindings: pinctrl: Add RZ/A2 pinctrl and GPIO Date: Wed, 14 Nov 2018 20:40:35 -0500 Message-Id: <20181115014035.125320-3-chris.brandt@renesas.com> X-Mailer: git-send-email 2.16.1 In-Reply-To: <20181115014035.125320-1-chris.brandt@renesas.com> References: <20181115014035.125320-1-chris.brandt@renesas.com> Sender: linux-renesas-soc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Add device tree binding documentation and header file for Renesas R7S9210 (RZ/A2) SoCs. Signed-off-by: Chris Brandt Reviewed-by: Rob Herring Reviewed-by: Geert Uytterhoeven Reviewed-by: Jacopo Mondi --- v4: * Converted Px to PORTx because of conflict with "PM" * Rounded up reg range * Changed 'should' to 'shall' because when there is only 1 in a list, you have no choice but to choose it. * Commented that Port M pins are also called JP_x in HW manual * Fixed typos and grammar * Added more Reviewed-by v3: * Added Reviewed-by v2: * Moved gpio-controller to required * Wrote a better description of what the sub-nodes are for * Added pinmux property description * Changed macro RZA2_PIN_ID to RZA2_PIN --- .../bindings/pinctrl/renesas,rza2-pinctrl.txt | 87 ++++++++++++++++++++++ include/dt-bindings/pinctrl/r7s9210-pinctrl.h | 47 ++++++++++++ 2 files changed, 134 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt create mode 100644 include/dt-bindings/pinctrl/r7s9210-pinctrl.h diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt new file mode 100644 index 000000000000..a63ccd476cda --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt @@ -0,0 +1,87 @@ +Renesas RZ/A2 combined Pin and GPIO controller + +The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO controller. +Pin multiplexing and GPIO configuration is performed on a per-pin basis. +Each port features up to 8 pins, each of them configurable for GPIO +function (port mode) or in alternate function mode. +Up to 8 different alternate function modes exist for each single pin. + +Pin controller node +------------------- + +Required properties: + - compatible: shall be: + - "renesas,r7s9210-pinctrl": for RZ/A2M + - reg + Address base and length of the memory area where the pin controller + hardware is mapped to. + - gpio-controller + This pin controller also controls pins as GPIO + - #gpio-cells + Must be 2 + - gpio-ranges + Expresses the total number of GPIO ports/pins in this SoC + +Example: Pin controller node for RZ/A2M SoC (r7s9210) + + pinctrl: pin-controller@fcffe000 { + compatible = "renesas,r7s9210-pinctrl"; + reg = <0xfcffe000 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 176>; + }; + +Sub-nodes +--------- + +The child nodes of the pin controller designate pins to be used for +specific peripheral functions or as GPIO. + +- Pin multiplexing sub-nodes: + A pin multiplexing sub-node describes how to configure a set of + (or a single) pin in some desired alternate function mode. + The values for the pinmux properties are a combination of port name, pin + number and the desired function index. Use the RZA2_PINMUX macro located + in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily define these. + For assigning GPIO pins, use the macro RZA2_PIN also in r7s9210-pinctrl.h + to express the desired port pin. + + Required properties: + - pinmux: + integer array representing pin number and pin multiplexing configuration. + When a pin has to be configured in alternate function mode, use this + property to identify the pin by its global index, and provide its + alternate function configuration number along with it. + When multiple pins are required to be configured as part of the same + alternate function they shall be specified as members of the same + argument list of a single "pinmux" property. + Helper macros to ease assembling the pin index from its position + (port where it sits on and pin number) and alternate function identifier + are provided by the pin controller header file at: + + Integers values in "pinmux" argument list are assembled as: + ((PORT * 8 + PIN) | MUX_FUNC << 16) + + Example: Board specific pins configuration + + &pinctrl { + /* Serial Console */ + scif4_pins: serial4 { + pinmux = , /* TxD4 */ + ; /* RxD4 */ + }; + }; + + Example: Assigning a GPIO: + + leds { + status = "okay"; + compatible = "gpio-leds"; + + led0 { + /* P6_0 */ + gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/include/dt-bindings/pinctrl/r7s9210-pinctrl.h b/include/dt-bindings/pinctrl/r7s9210-pinctrl.h new file mode 100644 index 000000000000..2d0c23e5d3a7 --- /dev/null +++ b/include/dt-bindings/pinctrl/r7s9210-pinctrl.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Defines macros and constants for Renesas RZ/A2 pin controller pin + * muxing functions. + */ +#ifndef __DT_BINDINGS_PINCTRL_RENESAS_RZA2_H +#define __DT_BINDINGS_PINCTRL_RENESAS_RZA2_H + +#define RZA2_PINS_PER_PORT 8 + +/* Port names as labeled in the Hardware Manual */ +#define PORT0 0 +#define PORT1 1 +#define PORT2 2 +#define PORT3 3 +#define PORT4 4 +#define PORT5 5 +#define PORT6 6 +#define PORT7 7 +#define PORT8 8 +#define PORT9 9 +#define PORTA 10 +#define PORTB 11 +#define PORTC 12 +#define PORTD 13 +#define PORTE 14 +#define PORTF 15 +#define PORTG 16 +#define PORTH 17 +/* No I */ +#define PORTJ 18 +#define PORTK 19 +#define PORTL 20 +#define PORTM 21 /* Pins PM_0/1 are labeled JP_0/1 in HW manual */ + +/* + * Create the pin index from its bank and position numbers and store in + * the upper 16 bits the alternate function identifier + */ +#define RZA2_PINMUX(b, p, f) ((b) * RZA2_PINS_PER_PORT + (p) | (f << 16)) + +/* + * Convert a port and pin label to its global pin index + */ + #define RZA2_PIN(port, pin) ((port) * RZA2_PINS_PER_PORT + (pin)) + +#endif /* __DT_BINDINGS_PINCTRL_RENESAS_RZA2_H */