diff mbox series

clk: Use of_node_name_eq for node name comparisons

Message ID 20181205195050.4759-5-robh@kernel.org (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show
Series clk: Use of_node_name_eq for node name comparisons | expand

Commit Message

Rob Herring Dec. 5, 2018, 7:50 p.m. UTC 
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.

For instances using of_node_cmp, this has the side effect of now using
case sensitive comparisons. This should not matter for any FDT based
system which all of these are.

Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 drivers/clk/renesas/clk-mstp.c   |  2 +-
 drivers/clk/ti/clkctrl.c         |  2 +-
 drivers/clk/ti/dpll.c            |  2 +-
 drivers/clk/ux500/u8500_of_clk.c | 10 +++++-----
 4 files changed, 8 insertions(+), 8 deletions(-)

Comments

Stephen Boyd Dec. 5, 2018, 8:43 p.m. UTC | #1 
Quoting Rob Herring (2018-12-05 11:50:21)
> Convert string compares of DT node names to use of_node_name_eq helper
> instead. This removes direct access to the node name pointer.
> 
> For instances using of_node_cmp, this has the side effect of now using
> case sensitive comparisons. This should not matter for any FDT based
> system which all of these are.
> 
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Tero Kristo <t-kristo@ti.com>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Cc: linux-renesas-soc@vger.kernel.org
> Cc: linux-clk@vger.kernel.org
> Cc: linux-omap@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---

Looks ok at a glance. I'll wait for some people to ack or test it.
Geert Uytterhoeven Dec. 5, 2018, 9:16 p.m. UTC | #2 
On Wed, Dec 5, 2018 at 8:50 PM Rob Herring <robh@kernel.org> wrote:
> Convert string compares of DT node names to use of_node_name_eq helper
> instead. This removes direct access to the node name pointer.
>
> For instances using of_node_cmp, this has the side effect of now using
> case sensitive comparisons. This should not matter for any FDT based
> system which all of these are.
>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Tero Kristo <t-kristo@ti.com>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Cc: linux-renesas-soc@vger.kernel.org
> Cc: linux-clk@vger.kernel.org
> Cc: linux-omap@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Signed-off-by: Rob Herring <robh@kernel.org>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

> ---
>  drivers/clk/renesas/clk-mstp.c   |  2 +-
>  drivers/clk/ti/clkctrl.c         |  2 +-
>  drivers/clk/ti/dpll.c            |  2 +-
>  drivers/clk/ux500/u8500_of_clk.c | 10 +++++-----
>  4 files changed, 8 insertions(+), 8 deletions(-)

For drivers/clk/renesas/clk-mstp.c :
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert
Ulf Hansson Dec. 11, 2018, 9:42 a.m. UTC | #3 
On Wed, 5 Dec 2018 at 20:50, Rob Herring <robh@kernel.org> wrote:
>
> Convert string compares of DT node names to use of_node_name_eq helper
> instead. This removes direct access to the node name pointer.
>
> For instances using of_node_cmp, this has the side effect of now using
> case sensitive comparisons. This should not matter for any FDT based
> system which all of these are.
>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Tero Kristo <t-kristo@ti.com>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Cc: linux-renesas-soc@vger.kernel.org
> Cc: linux-clk@vger.kernel.org
> Cc: linux-omap@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Signed-off-by: Rob Herring <robh@kernel.org>

For the ux500 part:

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe

> ---
>  drivers/clk/renesas/clk-mstp.c   |  2 +-
>  drivers/clk/ti/clkctrl.c         |  2 +-
>  drivers/clk/ti/dpll.c            |  2 +-
>  drivers/clk/ux500/u8500_of_clk.c | 10 +++++-----
>  4 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/clk/renesas/clk-mstp.c b/drivers/clk/renesas/clk-mstp.c
> index 1c1768c2cc82..765175d1148a 100644
> --- a/drivers/clk/renesas/clk-mstp.c
> +++ b/drivers/clk/renesas/clk-mstp.c
> @@ -280,7 +280,7 @@ int cpg_mstp_attach_dev(struct generic_pm_domain *unused, struct device *dev)
>                         goto found;
>
>                 /* BSC on r8a73a4/sh73a0 uses zb_clk instead of an mstp clock */
> -               if (!strcmp(clkspec.np->name, "zb_clk"))
> +               if (of_node_name_eq(clkspec.np, "zb_clk"))
>                         goto found;
>
>                 of_node_put(clkspec.np);
> diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
> index 469f560ae1cf..40630eb950fc 100644
> --- a/drivers/clk/ti/clkctrl.c
> +++ b/drivers/clk/ti/clkctrl.c
> @@ -448,7 +448,7 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
>         char *c;
>
>         if (!(ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) &&
> -           !strcmp(node->name, "clk"))
> +           of_node_name_eq(node, "clk"))
>                 ti_clk_features.flags |= TI_CLK_CLKCTRL_COMPAT;
>
>         addrp = of_get_address(node, 0, NULL, NULL);
> diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
> index 92e28af7afba..6c3329bc116f 100644
> --- a/drivers/clk/ti/dpll.c
> +++ b/drivers/clk/ti/dpll.c
> @@ -410,7 +410,7 @@ static void __init of_ti_omap3_dpll_setup(struct device_node *node)
>
>         if ((of_machine_is_compatible("ti,omap3630") ||
>              of_machine_is_compatible("ti,omap36xx")) &&
> -           !strcmp(node->name, "dpll5_ck"))
> +            of_node_name_eq(node, "dpll5_ck"))
>                 of_ti_dpll_setup(node, &omap3_dpll5_ck_ops, &dd);
>         else
>                 of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd);
> diff --git a/drivers/clk/ux500/u8500_of_clk.c b/drivers/clk/ux500/u8500_of_clk.c
> index d5888591e1a9..18a3c4522831 100644
> --- a/drivers/clk/ux500/u8500_of_clk.c
> +++ b/drivers/clk/ux500/u8500_of_clk.c
> @@ -545,21 +545,21 @@ static void u8500_clk_init(struct device_node *np)
>         for_each_child_of_node(np, child) {
>                 static struct clk_onecell_data clk_data;
>
> -               if (!of_node_cmp(child->name, "prcmu-clock")) {
> +               if (of_node_name_eq(child, "prcmu-clock")) {
>                         clk_data.clks = prcmu_clk;
>                         clk_data.clk_num = ARRAY_SIZE(prcmu_clk);
>                         of_clk_add_provider(child, of_clk_src_onecell_get, &clk_data);
>                 }
> -               if (!of_node_cmp(child->name, "prcc-periph-clock"))
> +               if (of_node_name_eq(child, "prcc-periph-clock"))
>                         of_clk_add_provider(child, ux500_twocell_get, prcc_pclk);
>
> -               if (!of_node_cmp(child->name, "prcc-kernel-clock"))
> +               if (of_node_name_eq(child, "prcc-kernel-clock"))
>                         of_clk_add_provider(child, ux500_twocell_get, prcc_kclk);
>
> -               if (!of_node_cmp(child->name, "rtc32k-clock"))
> +               if (of_node_name_eq(child, "rtc32k-clock"))
>                         of_clk_add_provider(child, of_clk_src_simple_get, rtc_clk);
>
> -               if (!of_node_cmp(child->name, "smp-twd-clock"))
> +               if (of_node_name_eq(child, "smp-twd-clock"))
>                         of_clk_add_provider(child, of_clk_src_simple_get, twd_clk);
>         }
>  }
> --
> 2.19.1
>
Stephen Boyd Dec. 14, 2018, 9:53 p.m. UTC | #4 
Quoting Rob Herring (2018-12-05 11:50:21)
> Convert string compares of DT node names to use of_node_name_eq helper
> instead. This removes direct access to the node name pointer.
> 
> For instances using of_node_cmp, this has the side effect of now using
> case sensitive comparisons. This should not matter for any FDT based
> system which all of these are.
> 
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Tero Kristo <t-kristo@ti.com>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Cc: linux-renesas-soc@vger.kernel.org
> Cc: linux-clk@vger.kernel.org
> Cc: linux-omap@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---

Applied to clk-next
diff mbox series

Patch

diff --git a/drivers/clk/renesas/clk-mstp.c b/drivers/clk/renesas/clk-mstp.c
index 1c1768c2cc82..765175d1148a 100644
--- a/drivers/clk/renesas/clk-mstp.c
+++ b/drivers/clk/renesas/clk-mstp.c
@@ -280,7 +280,7 @@  int cpg_mstp_attach_dev(struct generic_pm_domain *unused, struct device *dev)
 			goto found;
 
 		/* BSC on r8a73a4/sh73a0 uses zb_clk instead of an mstp clock */
-		if (!strcmp(clkspec.np->name, "zb_clk"))
+		if (of_node_name_eq(clkspec.np, "zb_clk"))
 			goto found;
 
 		of_node_put(clkspec.np);
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 469f560ae1cf..40630eb950fc 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -448,7 +448,7 @@  static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
 	char *c;
 
 	if (!(ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) &&
-	    !strcmp(node->name, "clk"))
+	    of_node_name_eq(node, "clk"))
 		ti_clk_features.flags |= TI_CLK_CLKCTRL_COMPAT;
 
 	addrp = of_get_address(node, 0, NULL, NULL);
diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
index 92e28af7afba..6c3329bc116f 100644
--- a/drivers/clk/ti/dpll.c
+++ b/drivers/clk/ti/dpll.c
@@ -410,7 +410,7 @@  static void __init of_ti_omap3_dpll_setup(struct device_node *node)
 
 	if ((of_machine_is_compatible("ti,omap3630") ||
 	     of_machine_is_compatible("ti,omap36xx")) &&
-	    !strcmp(node->name, "dpll5_ck"))
+	     of_node_name_eq(node, "dpll5_ck"))
 		of_ti_dpll_setup(node, &omap3_dpll5_ck_ops, &dd);
 	else
 		of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd);
diff --git a/drivers/clk/ux500/u8500_of_clk.c b/drivers/clk/ux500/u8500_of_clk.c
index d5888591e1a9..18a3c4522831 100644
--- a/drivers/clk/ux500/u8500_of_clk.c
+++ b/drivers/clk/ux500/u8500_of_clk.c
@@ -545,21 +545,21 @@  static void u8500_clk_init(struct device_node *np)
 	for_each_child_of_node(np, child) {
 		static struct clk_onecell_data clk_data;
 
-		if (!of_node_cmp(child->name, "prcmu-clock")) {
+		if (of_node_name_eq(child, "prcmu-clock")) {
 			clk_data.clks = prcmu_clk;
 			clk_data.clk_num = ARRAY_SIZE(prcmu_clk);
 			of_clk_add_provider(child, of_clk_src_onecell_get, &clk_data);
 		}
-		if (!of_node_cmp(child->name, "prcc-periph-clock"))
+		if (of_node_name_eq(child, "prcc-periph-clock"))
 			of_clk_add_provider(child, ux500_twocell_get, prcc_pclk);
 
-		if (!of_node_cmp(child->name, "prcc-kernel-clock"))
+		if (of_node_name_eq(child, "prcc-kernel-clock"))
 			of_clk_add_provider(child, ux500_twocell_get, prcc_kclk);
 
-		if (!of_node_cmp(child->name, "rtc32k-clock"))
+		if (of_node_name_eq(child, "rtc32k-clock"))
 			of_clk_add_provider(child, of_clk_src_simple_get, rtc_clk);
 
-		if (!of_node_cmp(child->name, "smp-twd-clock"))
+		if (of_node_name_eq(child, "smp-twd-clock"))
 			of_clk_add_provider(child, of_clk_src_simple_get, twd_clk);
 	}
 }