diff mbox series

[PATCH/RFC] pinctrl: sh-pfc: r8a77990: Fix MOD_SEL bit numbering

Message ID 20181220140241.20442-1-geert+renesas@glider.be (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show
Series [PATCH/RFC] pinctrl: sh-pfc: r8a77990: Fix MOD_SEL bit numbering | expand

Commit Message

Geert Uytterhoeven Dec. 20, 2018, 2:02 p.m. UTC
From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

MOD_SEL register bit numbering was different from R-Car E3 SoC and
R-Car H3/M3-[WN] SoCs.

MOD_SEL 1-bit      H3/M3-[WN]  E3

Comments

Yoshihiro Shimoda Dec. 26, 2018, 6:46 a.m. UTC | #1
Hi Geert-san,

> From: Geert Uytterhoeven, Sent: Thursday, December 20, 2018 11:03 PM
> 
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> 
> MOD_SEL register bit numbering was different from R-Car E3 SoC and
> R-Car H3/M3-[WN] SoCs.
> 
> MOD_SEL 1-bit      H3/M3-[WN]  E3
> ===============    ==========  =====
> Set Value = H'0    b'0         b'0
> Set Value = H'1    b'1         b'1
> 
> MOD_SEL 2-bits     H3/M3-[WN]  E3
> ===============    ==========  =====
> Set Value = H'0    b'00        b'00
> Set Value = H'1    b'01        b'10
> Set Value = H'2    b'10        b'01
> Set Value = H'3    b'11        b'11
> 
> MOD_SEL 3-bits     H3/M3-[WN]  E3
> ===============    ==========  =====
> Set Value = H'0    b'000       b'000
> Set Value = H'1    b'001       b'100
> Set Value = H'2    b'010       b'010
> Set Value = H'3    b'011       b'110
> Set Value = H'4    b'100       b'001
> Set Value = H'5    b'101       b'101
> Set Value = H'6    b'110       b'011
> Set Value = H'7    b'111       b'111
> 
> This patch replaces the #define name and value of MOD_SEL.
> 
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Fixes: 6d4036a1e3b3 ("pinctrl: sh-pfc: Initial R8A77990 PFC support")
> [shimoda: Split a patch per SoC and revise the commit log]
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> [geert: Use macros to do the actual reordering]
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Using a macro makes the code easier to writ, read, and maintain.
> Use "git show --color-words" to see the difference.
> 
> I'd love to handle the reversal in the PINMUX_CFG_REG_VAR()
> descriptions, but I can't use e.g. REV8(MOD_SEL0_19_18_17) there, as
> MOD_SEL0_19_18_17 is a single parameter, not 8 parameters.
> 
> Can this be improved?

Thank you for updating the patch to use the macros!
I think this patch can improve readability.

So,

Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Best regards,
Yoshihiro Shimoda


>  drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 32 +++++++++++++++------------
>  1 file changed, 18 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
> index a733534610b36035..d44959d373603f45 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
> @@ -391,29 +391,33 @@ FM(IP12_23_20)	IP12_23_20	FM(IP13_23_20)	IP13_23_20	FM(IP14_23_20)	IP14_23_20
> 	FM
>  FM(IP12_27_24)	IP12_27_24	FM(IP13_27_24)	IP13_27_24	FM(IP14_27_24)	IP14_27_24	FM(IP15_27_24)
> 	IP15_27_24 \
>  FM(IP12_31_28)	IP12_31_28	FM(IP13_31_28)	IP13_31_28	FM(IP14_31_28)	IP14_31_28	FM(IP15_31_28)
> 	IP15_31_28
> 
> +/* The bit numbering in MOD_SEL fields is reversed */
> +#define REV4(f0, f1, f2, f3)			f0 f2 f1 f3
> +#define REV8(f0, f1, f2, f3, f4, f5, f6, f7)	f0 f4 f2 f6 f1 f5 f3 f7
> +
>  /* MOD_SEL0 */			/* 0 */				/* 1 */				/* 2 */
> 		/* 3 */			/* 4 */			/* 5 */		/* 6 */		/* 7 */
> -#define MOD_SEL0_30_29		FM(SEL_ADGB_0)			FM(SEL_ADGB_1)			FM(SEL_ADGB_2)
> 		F_(0, 0)
> +#define MOD_SEL0_30_29	   REV4(FM(SEL_ADGB_0),			FM(SEL_ADGB_1),			FM(SEL_ADGB_2),
> 		F_(0, 0))
>  #define MOD_SEL0_28		FM(SEL_DRIF0_0)			FM(SEL_DRIF0_1)
> -#define MOD_SEL0_27_26		FM(SEL_FM_0)			FM(SEL_FM_1)			FM(SEL_FM_2)
> 		F_(0, 0)
> +#define MOD_SEL0_27_26	   REV4(FM(SEL_FM_0),			FM(SEL_FM_1),			FM(SEL_FM_2),
> 		F_(0, 0))
>  #define MOD_SEL0_25		FM(SEL_FSO_0)			FM(SEL_FSO_1)
>  #define MOD_SEL0_24		FM(SEL_HSCIF0_0)		FM(SEL_HSCIF0_1)
>  #define MOD_SEL0_23		FM(SEL_HSCIF1_0)		FM(SEL_HSCIF1_1)
>  #define MOD_SEL0_22		FM(SEL_HSCIF2_0)		FM(SEL_HSCIF2_1)
> -#define MOD_SEL0_21_20		FM(SEL_I2C1_0)			FM(SEL_I2C1_1)			FM(SEL_I2C1_2)
> 		FM(SEL_I2C1_3)
> -#define MOD_SEL0_19_18_17	FM(SEL_I2C2_0)			FM(SEL_I2C2_1)			FM(SEL_I2C2_2)
> 		FM(SEL_I2C2_3)		FM(SEL_I2C2_4)		F_(0, 0)	F_(0, 0)	F_(0, 0)
> +#define MOD_SEL0_21_20	   REV4(FM(SEL_I2C1_0),			FM(SEL_I2C1_1),			FM(SEL_I2C1_2),
> 		FM(SEL_I2C1_3))
> +#define MOD_SEL0_19_18_17  REV8(FM(SEL_I2C2_0),			FM(SEL_I2C2_1),
> 	FM(SEL_I2C2_2),			FM(SEL_I2C2_3),		FM(SEL_I2C2_4),		F_(0, 0),	F_(0, 0),
> 	F_(0, 0))
>  #define MOD_SEL0_16		FM(SEL_NDFC_0)			FM(SEL_NDFC_1)
>  #define MOD_SEL0_15		FM(SEL_PWM0_0)			FM(SEL_PWM0_1)
>  #define MOD_SEL0_14		FM(SEL_PWM1_0)			FM(SEL_PWM1_1)
> -#define MOD_SEL0_13_12		FM(SEL_PWM2_0)			FM(SEL_PWM2_1)			FM(SEL_PWM2_2)
> 		F_(0, 0)
> -#define MOD_SEL0_11_10		FM(SEL_PWM3_0)			FM(SEL_PWM3_1)			FM(SEL_PWM3_2)
> 		F_(0, 0)
> +#define MOD_SEL0_13_12	   REV4(FM(SEL_PWM2_0),			FM(SEL_PWM2_1),			FM(SEL_PWM2_2),
> 		F_(0, 0))
> +#define MOD_SEL0_11_10	   REV4(FM(SEL_PWM3_0),			FM(SEL_PWM3_1),			FM(SEL_PWM3_2),
> 		F_(0, 0))
>  #define MOD_SEL0_9		FM(SEL_PWM4_0)			FM(SEL_PWM4_1)
>  #define MOD_SEL0_8		FM(SEL_PWM5_0)			FM(SEL_PWM5_1)
>  #define MOD_SEL0_7		FM(SEL_PWM6_0)			FM(SEL_PWM6_1)
> -#define MOD_SEL0_6_5		FM(SEL_REMOCON_0)		FM(SEL_REMOCON_1)		FM(SEL_REMOCON_2)
> 		F_(0, 0)
> +#define MOD_SEL0_6_5	   REV4(FM(SEL_REMOCON_0),		FM(SEL_REMOCON_1),		FM(SEL_REMOCON_2),
> 		F_(0, 0))
>  #define MOD_SEL0_4		FM(SEL_SCIF_0)			FM(SEL_SCIF_1)
>  #define MOD_SEL0_3		FM(SEL_SCIF0_0)			FM(SEL_SCIF0_1)
>  #define MOD_SEL0_2		FM(SEL_SCIF2_0)			FM(SEL_SCIF2_1)
> -#define MOD_SEL0_1_0		FM(SEL_SPEED_PULSE_IF_0)	FM(SEL_SPEED_PULSE_IF_1)
> 	FM(SEL_SPEED_PULSE_IF_2)	F_(0, 0)
> +#define MOD_SEL0_1_0	   REV4(FM(SEL_SPEED_PULSE_IF_0),	FM(SEL_SPEED_PULSE_IF_1),
> 	FM(SEL_SPEED_PULSE_IF_2),	F_(0, 0))
> 
>  /* MOD_SEL1 */			/* 0 */				/* 1 */				/* 2 */
> 		/* 3 */			/* 4 */			/* 5 */		/* 6 */		/* 7 */
>  #define MOD_SEL1_31		FM(SEL_SIMCARD_0)		FM(SEL_SIMCARD_1)
> @@ -422,18 +426,18 @@ FM(IP12_31_28)	IP12_31_28	FM(IP13_31_28)	IP13_31_28	FM(IP14_31_28)	IP14_31_28
> 	FM
>  #define MOD_SEL1_28		FM(SEL_USB_20_CH0_0)		FM(SEL_USB_20_CH0_1)
>  #define MOD_SEL1_26		FM(SEL_DRIF2_0)			FM(SEL_DRIF2_1)
>  #define MOD_SEL1_25		FM(SEL_DRIF3_0)			FM(SEL_DRIF3_1)
> -#define MOD_SEL1_24_23_22	FM(SEL_HSCIF3_0)		FM(SEL_HSCIF3_1)		FM(SEL_HSCIF3_2)
> 		FM(SEL_HSCIF3_3)	FM(SEL_HSCIF3_4)	F_(0, 0)	F_(0, 0)	F_(0, 0)
> -#define MOD_SEL1_21_20_19	FM(SEL_HSCIF4_0)		FM(SEL_HSCIF4_1)		FM(SEL_HSCIF4_2)
> 		FM(SEL_HSCIF4_3)	FM(SEL_HSCIF4_4)	F_(0, 0)	F_(0, 0)	F_(0, 0)
> +#define MOD_SEL1_24_23_22  REV8(FM(SEL_HSCIF3_0),		FM(SEL_HSCIF3_1),		FM(SEL_HSCIF3_2),
> 		FM(SEL_HSCIF3_3),	FM(SEL_HSCIF3_4),	F_(0, 0),	F_(0, 0),	F_(0, 0))
> +#define MOD_SEL1_21_20_19  REV8(FM(SEL_HSCIF4_0),		FM(SEL_HSCIF4_1),		FM(SEL_HSCIF4_2),
> 		FM(SEL_HSCIF4_3),	FM(SEL_HSCIF4_4),	F_(0, 0),	F_(0, 0),	F_(0, 0))
>  #define MOD_SEL1_18		FM(SEL_I2C6_0)			FM(SEL_I2C6_1)
>  #define MOD_SEL1_17		FM(SEL_I2C7_0)			FM(SEL_I2C7_1)
>  #define MOD_SEL1_16		FM(SEL_MSIOF2_0)		FM(SEL_MSIOF2_1)
>  #define MOD_SEL1_15		FM(SEL_MSIOF3_0)		FM(SEL_MSIOF3_1)
> -#define MOD_SEL1_14_13		FM(SEL_SCIF3_0)			FM(SEL_SCIF3_1)			FM(SEL_SCIF3_2)
> 		F_(0, 0)
> -#define MOD_SEL1_12_11		FM(SEL_SCIF4_0)			FM(SEL_SCIF4_1)			FM(SEL_SCIF4_2)
> 		F_(0, 0)
> -#define MOD_SEL1_10_9		FM(SEL_SCIF5_0)			FM(SEL_SCIF5_1)			FM(SEL_SCIF5_2)
> 		F_(0, 0)
> +#define MOD_SEL1_14_13	   REV4(FM(SEL_SCIF3_0),		FM(SEL_SCIF3_1),		FM(SEL_SCIF3_2),
> 		F_(0, 0))
> +#define MOD_SEL1_12_11	   REV4(FM(SEL_SCIF4_0),		FM(SEL_SCIF4_1),		FM(SEL_SCIF4_2),
> 		F_(0, 0))
> +#define MOD_SEL1_10_9	   REV4(FM(SEL_SCIF5_0),		FM(SEL_SCIF5_1),		FM(SEL_SCIF5_2),
> 		F_(0, 0))
>  #define MOD_SEL1_8		FM(SEL_VIN4_0)			FM(SEL_VIN4_1)
>  #define MOD_SEL1_7		FM(SEL_VIN5_0)			FM(SEL_VIN5_1)
> -#define MOD_SEL1_6_5		FM(SEL_ADGC_0)			FM(SEL_ADGC_1)			FM(SEL_ADGC_2)
> 		F_(0, 0)
> +#define MOD_SEL1_6_5	   REV4(FM(SEL_ADGC_0),			FM(SEL_ADGC_1),			FM(SEL_ADGC_2),
> 		F_(0, 0))
>  #define MOD_SEL1_4		FM(SEL_SSI9_0)			FM(SEL_SSI9_1)
> 
>  #define PINMUX_MOD_SELS	\
> --
> 2.17.1
Geert Uytterhoeven Jan. 21, 2019, 12:30 p.m. UTC | #2
On Wed, Dec 26, 2018 at 7:46 AM Yoshihiro Shimoda
<yoshihiro.shimoda.uh@renesas.com> wrote:
> > From: Geert Uytterhoeven, Sent: Thursday, December 20, 2018 11:03 PM
> >
> > From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> >
> > MOD_SEL register bit numbering was different from R-Car E3 SoC and
> > R-Car H3/M3-[WN] SoCs.
> >
> > MOD_SEL 1-bit      H3/M3-[WN]  E3
> > ===============    ==========  =====
> > Set Value = H'0    b'0         b'0
> > Set Value = H'1    b'1         b'1
> >
> > MOD_SEL 2-bits     H3/M3-[WN]  E3
> > ===============    ==========  =====
> > Set Value = H'0    b'00        b'00
> > Set Value = H'1    b'01        b'10
> > Set Value = H'2    b'10        b'01
> > Set Value = H'3    b'11        b'11
> >
> > MOD_SEL 3-bits     H3/M3-[WN]  E3
> > ===============    ==========  =====
> > Set Value = H'0    b'000       b'000
> > Set Value = H'1    b'001       b'100
> > Set Value = H'2    b'010       b'010
> > Set Value = H'3    b'011       b'110
> > Set Value = H'4    b'100       b'001
> > Set Value = H'5    b'101       b'101
> > Set Value = H'6    b'110       b'011
> > Set Value = H'7    b'111       b'111
> >
> > This patch replaces the #define name and value of MOD_SEL.
> >
> > Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> > Fixes: 6d4036a1e3b3 ("pinctrl: sh-pfc: Initial R8A77990 PFC support")
> > [shimoda: Split a patch per SoC and revise the commit log]
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> > [geert: Use macros to do the actual reordering]
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> > ---
> > Using a macro makes the code easier to writ, read, and maintain.
> > Use "git show --color-words" to see the difference.
> >
> > I'd love to handle the reversal in the PINMUX_CFG_REG_VAR()
> > descriptions, but I can't use e.g. REV8(MOD_SEL0_19_18_17) there, as
> > MOD_SEL0_19_18_17 is a single parameter, not 8 parameters.
> >
> > Can this be improved?
>
> Thank you for updating the patch to use the macros!
> I think this patch can improve readability.
>
> So,
>
> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Thanks, queuing in sh-pfc-for-v5.1.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

===============    ==========  =====
Set Value = H'0    b'0         b'0
Set Value = H'1    b'1         b'1

MOD_SEL 2-bits     H3/M3-[WN]  E3
===============    ==========  =====
Set Value = H'0    b'00        b'00
Set Value = H'1    b'01        b'10
Set Value = H'2    b'10        b'01
Set Value = H'3    b'11        b'11

MOD_SEL 3-bits     H3/M3-[WN]  E3
===============    ==========  =====
Set Value = H'0    b'000       b'000
Set Value = H'1    b'001       b'100
Set Value = H'2    b'010       b'010
Set Value = H'3    b'011       b'110
Set Value = H'4    b'100       b'001
Set Value = H'5    b'101       b'101
Set Value = H'6    b'110       b'011
Set Value = H'7    b'111       b'111

This patch replaces the #define name and value of MOD_SEL.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Fixes: 6d4036a1e3b3 ("pinctrl: sh-pfc: Initial R8A77990 PFC support")
[shimoda: Split a patch per SoC and revise the commit log]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[geert: Use macros to do the actual reordering]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Using a macro makes the code easier to writ, read, and maintain.
Use "git show --color-words" to see the difference.

I'd love to handle the reversal in the PINMUX_CFG_REG_VAR()
descriptions, but I can't use e.g. REV8(MOD_SEL0_19_18_17) there, as
MOD_SEL0_19_18_17 is a single parameter, not 8 parameters.

Can this be improved?

 drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 32 +++++++++++++++------------
 1 file changed, 18 insertions(+), 14 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
index a733534610b36035..d44959d373603f45 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
@@ -391,29 +391,33 @@  FM(IP12_23_20)	IP12_23_20	FM(IP13_23_20)	IP13_23_20	FM(IP14_23_20)	IP14_23_20	FM
 FM(IP12_27_24)	IP12_27_24	FM(IP13_27_24)	IP13_27_24	FM(IP14_27_24)	IP14_27_24	FM(IP15_27_24)	IP15_27_24 \
 FM(IP12_31_28)	IP12_31_28	FM(IP13_31_28)	IP13_31_28	FM(IP14_31_28)	IP14_31_28	FM(IP15_31_28)	IP15_31_28
 
+/* The bit numbering in MOD_SEL fields is reversed */
+#define REV4(f0, f1, f2, f3)			f0 f2 f1 f3
+#define REV8(f0, f1, f2, f3, f4, f5, f6, f7)	f0 f4 f2 f6 f1 f5 f3 f7
+
 /* MOD_SEL0 */			/* 0 */				/* 1 */				/* 2 */				/* 3 */			/* 4 */			/* 5 */		/* 6 */		/* 7 */
-#define MOD_SEL0_30_29		FM(SEL_ADGB_0)			FM(SEL_ADGB_1)			FM(SEL_ADGB_2)			F_(0, 0)
+#define MOD_SEL0_30_29	   REV4(FM(SEL_ADGB_0),			FM(SEL_ADGB_1),			FM(SEL_ADGB_2),			F_(0, 0))
 #define MOD_SEL0_28		FM(SEL_DRIF0_0)			FM(SEL_DRIF0_1)
-#define MOD_SEL0_27_26		FM(SEL_FM_0)			FM(SEL_FM_1)			FM(SEL_FM_2)			F_(0, 0)
+#define MOD_SEL0_27_26	   REV4(FM(SEL_FM_0),			FM(SEL_FM_1),			FM(SEL_FM_2),			F_(0, 0))
 #define MOD_SEL0_25		FM(SEL_FSO_0)			FM(SEL_FSO_1)
 #define MOD_SEL0_24		FM(SEL_HSCIF0_0)		FM(SEL_HSCIF0_1)
 #define MOD_SEL0_23		FM(SEL_HSCIF1_0)		FM(SEL_HSCIF1_1)
 #define MOD_SEL0_22		FM(SEL_HSCIF2_0)		FM(SEL_HSCIF2_1)
-#define MOD_SEL0_21_20		FM(SEL_I2C1_0)			FM(SEL_I2C1_1)			FM(SEL_I2C1_2)			FM(SEL_I2C1_3)
-#define MOD_SEL0_19_18_17	FM(SEL_I2C2_0)			FM(SEL_I2C2_1)			FM(SEL_I2C2_2)			FM(SEL_I2C2_3)		FM(SEL_I2C2_4)		F_(0, 0)	F_(0, 0)	F_(0, 0)
+#define MOD_SEL0_21_20	   REV4(FM(SEL_I2C1_0),			FM(SEL_I2C1_1),			FM(SEL_I2C1_2),			FM(SEL_I2C1_3))
+#define MOD_SEL0_19_18_17  REV8(FM(SEL_I2C2_0),			FM(SEL_I2C2_1),			FM(SEL_I2C2_2),			FM(SEL_I2C2_3),		FM(SEL_I2C2_4),		F_(0, 0),	F_(0, 0),	F_(0, 0))
 #define MOD_SEL0_16		FM(SEL_NDFC_0)			FM(SEL_NDFC_1)
 #define MOD_SEL0_15		FM(SEL_PWM0_0)			FM(SEL_PWM0_1)
 #define MOD_SEL0_14		FM(SEL_PWM1_0)			FM(SEL_PWM1_1)
-#define MOD_SEL0_13_12		FM(SEL_PWM2_0)			FM(SEL_PWM2_1)			FM(SEL_PWM2_2)			F_(0, 0)
-#define MOD_SEL0_11_10		FM(SEL_PWM3_0)			FM(SEL_PWM3_1)			FM(SEL_PWM3_2)			F_(0, 0)
+#define MOD_SEL0_13_12	   REV4(FM(SEL_PWM2_0),			FM(SEL_PWM2_1),			FM(SEL_PWM2_2),			F_(0, 0))
+#define MOD_SEL0_11_10	   REV4(FM(SEL_PWM3_0),			FM(SEL_PWM3_1),			FM(SEL_PWM3_2),			F_(0, 0))
 #define MOD_SEL0_9		FM(SEL_PWM4_0)			FM(SEL_PWM4_1)
 #define MOD_SEL0_8		FM(SEL_PWM5_0)			FM(SEL_PWM5_1)
 #define MOD_SEL0_7		FM(SEL_PWM6_0)			FM(SEL_PWM6_1)
-#define MOD_SEL0_6_5		FM(SEL_REMOCON_0)		FM(SEL_REMOCON_1)		FM(SEL_REMOCON_2)		F_(0, 0)
+#define MOD_SEL0_6_5	   REV4(FM(SEL_REMOCON_0),		FM(SEL_REMOCON_1),		FM(SEL_REMOCON_2),		F_(0, 0))
 #define MOD_SEL0_4		FM(SEL_SCIF_0)			FM(SEL_SCIF_1)
 #define MOD_SEL0_3		FM(SEL_SCIF0_0)			FM(SEL_SCIF0_1)
 #define MOD_SEL0_2		FM(SEL_SCIF2_0)			FM(SEL_SCIF2_1)
-#define MOD_SEL0_1_0		FM(SEL_SPEED_PULSE_IF_0)	FM(SEL_SPEED_PULSE_IF_1)	FM(SEL_SPEED_PULSE_IF_2)	F_(0, 0)
+#define MOD_SEL0_1_0	   REV4(FM(SEL_SPEED_PULSE_IF_0),	FM(SEL_SPEED_PULSE_IF_1),	FM(SEL_SPEED_PULSE_IF_2),	F_(0, 0))
 
 /* MOD_SEL1 */			/* 0 */				/* 1 */				/* 2 */				/* 3 */			/* 4 */			/* 5 */		/* 6 */		/* 7 */
 #define MOD_SEL1_31		FM(SEL_SIMCARD_0)		FM(SEL_SIMCARD_1)
@@ -422,18 +426,18 @@  FM(IP12_31_28)	IP12_31_28	FM(IP13_31_28)	IP13_31_28	FM(IP14_31_28)	IP14_31_28	FM
 #define MOD_SEL1_28		FM(SEL_USB_20_CH0_0)		FM(SEL_USB_20_CH0_1)
 #define MOD_SEL1_26		FM(SEL_DRIF2_0)			FM(SEL_DRIF2_1)
 #define MOD_SEL1_25		FM(SEL_DRIF3_0)			FM(SEL_DRIF3_1)
-#define MOD_SEL1_24_23_22	FM(SEL_HSCIF3_0)		FM(SEL_HSCIF3_1)		FM(SEL_HSCIF3_2)		FM(SEL_HSCIF3_3)	FM(SEL_HSCIF3_4)	F_(0, 0)	F_(0, 0)	F_(0, 0)
-#define MOD_SEL1_21_20_19	FM(SEL_HSCIF4_0)		FM(SEL_HSCIF4_1)		FM(SEL_HSCIF4_2)		FM(SEL_HSCIF4_3)	FM(SEL_HSCIF4_4)	F_(0, 0)	F_(0, 0)	F_(0, 0)
+#define MOD_SEL1_24_23_22  REV8(FM(SEL_HSCIF3_0),		FM(SEL_HSCIF3_1),		FM(SEL_HSCIF3_2),		FM(SEL_HSCIF3_3),	FM(SEL_HSCIF3_4),	F_(0, 0),	F_(0, 0),	F_(0, 0))
+#define MOD_SEL1_21_20_19  REV8(FM(SEL_HSCIF4_0),		FM(SEL_HSCIF4_1),		FM(SEL_HSCIF4_2),		FM(SEL_HSCIF4_3),	FM(SEL_HSCIF4_4),	F_(0, 0),	F_(0, 0),	F_(0, 0))
 #define MOD_SEL1_18		FM(SEL_I2C6_0)			FM(SEL_I2C6_1)
 #define MOD_SEL1_17		FM(SEL_I2C7_0)			FM(SEL_I2C7_1)
 #define MOD_SEL1_16		FM(SEL_MSIOF2_0)		FM(SEL_MSIOF2_1)
 #define MOD_SEL1_15		FM(SEL_MSIOF3_0)		FM(SEL_MSIOF3_1)
-#define MOD_SEL1_14_13		FM(SEL_SCIF3_0)			FM(SEL_SCIF3_1)			FM(SEL_SCIF3_2)			F_(0, 0)
-#define MOD_SEL1_12_11		FM(SEL_SCIF4_0)			FM(SEL_SCIF4_1)			FM(SEL_SCIF4_2)			F_(0, 0)
-#define MOD_SEL1_10_9		FM(SEL_SCIF5_0)			FM(SEL_SCIF5_1)			FM(SEL_SCIF5_2)			F_(0, 0)
+#define MOD_SEL1_14_13	   REV4(FM(SEL_SCIF3_0),		FM(SEL_SCIF3_1),		FM(SEL_SCIF3_2),		F_(0, 0))
+#define MOD_SEL1_12_11	   REV4(FM(SEL_SCIF4_0),		FM(SEL_SCIF4_1),		FM(SEL_SCIF4_2),		F_(0, 0))
+#define MOD_SEL1_10_9	   REV4(FM(SEL_SCIF5_0),		FM(SEL_SCIF5_1),		FM(SEL_SCIF5_2),		F_(0, 0))
 #define MOD_SEL1_8		FM(SEL_VIN4_0)			FM(SEL_VIN4_1)
 #define MOD_SEL1_7		FM(SEL_VIN5_0)			FM(SEL_VIN5_1)
-#define MOD_SEL1_6_5		FM(SEL_ADGC_0)			FM(SEL_ADGC_1)			FM(SEL_ADGC_2)			F_(0, 0)
+#define MOD_SEL1_6_5	   REV4(FM(SEL_ADGC_0),			FM(SEL_ADGC_1),			FM(SEL_ADGC_2),			F_(0, 0))
 #define MOD_SEL1_4		FM(SEL_SSI9_0)			FM(SEL_SSI9_1)
 
 #define PINMUX_MOD_SELS	\