| Message ID | 20190218100313.14529-2-niklas.soderlund+renesas@ragnatech.se (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Kieran Bingham |
| Headers | show |
| Series | rcar-csi2: Update start procedures to latest revision of datasheet | expand |
> On February 18, 2019 at 11:03 AM Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> wrote: > > > The latest datasheet (rev 1.50) updates the start procedure for V3M and > E3. Update the driver to match these changes. > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > --- > drivers/media/platform/rcar-vin/rcar-csi2.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c > index 664d3784be2b9db9..fbbe86a7a0fe14ab 100644 > --- a/drivers/media/platform/rcar-vin/rcar-csi2.c > +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c > @@ -940,11 +940,11 @@ static int rcsi2_init_phtw_v3m_e3(struct rcar_csi2 *priv, unsigned int mbps) > static int rcsi2_confirm_start_v3m_e3(struct rcar_csi2 *priv) > { > static const struct phtw_value step1[] = { > - { .data = 0xed, .code = 0x34 }, > - { .data = 0xed, .code = 0x44 }, > - { .data = 0xed, .code = 0x54 }, > - { .data = 0xed, .code = 0x84 }, > - { .data = 0xed, .code = 0x94 }, > + { .data = 0xee, .code = 0x34 }, > + { .data = 0xee, .code = 0x44 }, > + { .data = 0xee, .code = 0x54 }, > + { .data = 0xee, .code = 0x84 }, > + { .data = 0xee, .code = 0x94 }, > { /* sentinel */ }, > }; Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> CU Uli
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c index 664d3784be2b9db9..fbbe86a7a0fe14ab 100644 --- a/drivers/media/platform/rcar-vin/rcar-csi2.c +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c @@ -940,11 +940,11 @@ static int rcsi2_init_phtw_v3m_e3(struct rcar_csi2 *priv, unsigned int mbps) static int rcsi2_confirm_start_v3m_e3(struct rcar_csi2 *priv) { static const struct phtw_value step1[] = { - { .data = 0xed, .code = 0x34 }, - { .data = 0xed, .code = 0x44 }, - { .data = 0xed, .code = 0x54 }, - { .data = 0xed, .code = 0x84 }, - { .data = 0xed, .code = 0x94 }, + { .data = 0xee, .code = 0x34 }, + { .data = 0xee, .code = 0x44 }, + { .data = 0xee, .code = 0x54 }, + { .data = 0xee, .code = 0x84 }, + { .data = 0xee, .code = 0x94 }, { /* sentinel */ }, };
The latest datasheet (rev 1.50) updates the start procedure for V3M and E3. Update the driver to match these changes. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> --- drivers/media/platform/rcar-vin/rcar-csi2.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)