@@ -85,6 +85,9 @@ struct rcar_csi2;
/* Interrupt Enable */
#define INTEN_REG 0x30
+#define INTEN_INT_AFIFO_OF BIT(27)
+#define INTEN_INT_ERRSOTHS BIT(4)
+#define INTEN_INT_ERRSOTSYNCHS BIT(3)
/* Interrupt Source Mask */
#define INTCLOSE_REG 0x34
@@ -525,6 +528,10 @@ static int rcsi2_start_receiver(struct rcar_csi2 *priv)
if (mbps < 0)
return mbps;
+ /* Enable interrupts. */
+ rcsi2_write(priv, INTEN_REG, INTEN_INT_AFIFO_OF | INTEN_INT_ERRSOTHS
+ | INTEN_INT_ERRSOTSYNCHS);
+
/* Init */
rcsi2_write(priv, TREF_REG, TREF_TREF);
rcsi2_write(priv, PHTC_REG, 0);
@@ -685,6 +692,43 @@ static const struct v4l2_subdev_ops rcar_csi2_subdev_ops = {
.pad = &rcar_csi2_pad_ops,
};
+static irqreturn_t rcsi2_irq(int irq, void *data)
+{
+ struct rcar_csi2 *priv = data;
+ u32 status, err_status;
+
+ status = rcsi2_read(priv, INTSTATE_REG);
+ err_status = rcsi2_read(priv, INTERRSTATE_REG);
+
+ if (!status)
+ return IRQ_HANDLED;
+
+ rcsi2_write(priv, INTSTATE_REG, status);
+
+ if (!err_status)
+ return IRQ_HANDLED;
+
+ rcsi2_write(priv, INTERRSTATE_REG, err_status);
+
+ dev_info(priv->dev, "Transfer error, restarting CSI-2 receiver\n");
+
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t rcsi2_irq_thread(int irq, void *data)
+{
+ struct rcar_csi2 *priv = data;
+
+ mutex_lock(&priv->lock);
+ rcsi2_stop(priv);
+ usleep_range(1000, 2000);
+ if (rcsi2_start(priv))
+ dev_warn(priv->dev, "Failed to restart CSI-2 receiver\n");
+ mutex_unlock(&priv->lock);
+
+ return IRQ_HANDLED;
+}
+
/* -----------------------------------------------------------------------------
* Async handling and registration of subdevices and links.
*/
@@ -957,7 +1001,7 @@ static int rcsi2_probe_resources(struct rcar_csi2 *priv,
struct platform_device *pdev)
{
struct resource *res;
- int irq;
+ int irq, ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->base = devm_ioremap_resource(&pdev->dev, res);
@@ -968,6 +1012,12 @@ static int rcsi2_probe_resources(struct rcar_csi2 *priv,
if (irq < 0)
return irq;
+ ret = devm_request_threaded_irq(&pdev->dev, irq, rcsi2_irq,
+ rcsi2_irq_thread, IRQF_SHARED,
+ KBUILD_MODNAME, priv);
+ if (ret)
+ return ret;
+
priv->rstc = devm_reset_control_get(&pdev->dev, NULL);
if (IS_ERR(priv->rstc))
return PTR_ERR(priv->rstc);
Restart the CSI-2 link if the CSI-2 receiver detects an error during reception. The driver did nothing when a link error happened and the data flow simply stopped without the user knowing why. Change the driver to try and recover from errors by restarting the link and informing the user that something is not right. For obvious reasons it's not possible to recover from all errors (video source disconnected for example) but in such cases the user is at least informed of the error and the same behavior of the stopped data flow is retained. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> --- drivers/media/platform/rcar-vin/rcar-csi2.c | 52 ++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-)