@@ -5998,7 +5998,7 @@ static const struct pinmux_drive_reg pinmux_drive_regs[] = {
{ PIN_DU_DOTCLKIN1, 0, 2 }, /* DU_DOTCLKIN1 */
} },
{ PINMUX_DRIVE_REG("DRVCTRL12", 0xe6060330) {
- { PIN_DU_DOTCLKIN3, 28, 2 }, /* DU_DOTCLKIN3 */
+ { PIN_DU_DOTCLKIN3, 24, 2 }, /* DU_DOTCLKIN3 */
{ PIN_FSCLKST, 20, 2 }, /* FSCLKST */
{ PIN_TMS, 4, 2 }, /* TMS */
} },
@@ -6254,8 +6254,8 @@ static const struct pinmux_bias_reg pinmux_bias_regs[] = {
[31] = PIN_DU_DOTCLKIN1, /* DU_DOTCLKIN1 */
} },
{ PINMUX_BIAS_REG("PUEN3", 0xe606040c, "PUD3", 0xe606044c) {
- [ 0] = PIN_DU_DOTCLKIN3, /* DU_DOTCLKIN3 */
- [ 1] = SH_PFC_PIN_NONE,
+ [ 0] = SH_PFC_PIN_NONE,
+ [ 1] = PIN_DU_DOTCLKIN3, /* DU_DOTCLKIN3 */
[ 2] = PIN_FSCLKST, /* FSCLKST */
[ 3] = PIN_EXTALR, /* EXTALR*/
[ 4] = PIN_TRST_N, /* TRST# */
R-Car Gen3 Hardware Manual Errata for Rev. 2.00 of October 24, 2019 changed the configuration bits for drive and bias control for the DU_DOTCLKIN3 pin on R-Car M3-N, to match the same pin on R-Car H3. Update the driver to reflect this. After this, the handling of drive and bias control for the various DU_DOTCLKINx pins is consistent across all of the R-Car H3, M3-W, M3-W+, and M3-N SoCs. Fixes: 86c045c2e4201e94 ("pinctrl: sh-pfc: r8a77965: Replace DU_DOTCLKIN2 by DU_DOTCLKIN3") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- To be queued in sh-pfc-for-v5.6. drivers/pinctrl/sh-pfc/pfc-r8a77965.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)