@@ -14,6 +14,7 @@
#include <linux/of.h>
#include <linux/clk.h>
#include <linux/of_address.h>
+#include <linux/pm_runtime.h>
#include "cc_driver.h"
#include "cc_request_mgr.h"
@@ -360,6 +361,16 @@ static int init_cc_resources(struct platform_device *plat_dev)
new_drvdata->sec_disabled = cc_sec_disable;
+ pm_runtime_set_autosuspend_delay(dev, CC_SUSPEND_TIMEOUT);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ rc = pm_runtime_get_sync(dev);
+ if (rc < 0) {
+ dev_err(dev, "pm_runtime_get_sync() failed: %d\n", rc);
+ goto post_pm_err;
+ }
+
/* wait for Crytpcell reset completion */
if (!cc_wait_for_reset_completion(new_drvdata)) {
dev_err(dev, "Cryptocell reset not completed");
@@ -372,7 +383,7 @@ static int init_cc_resources(struct platform_device *plat_dev)
dev_err(dev, "Invalid CC signature: SIGNATURE=0x%08X != expected=0x%08X\n",
val, hw_rev->sig);
rc = -EINVAL;
- goto post_clk_err;
+ goto post_pm_err;
}
sig_cidr = val;
hw_rev_pidr = cc_ioread(new_drvdata, new_drvdata->ver_offset);
@@ -383,7 +394,7 @@ static int init_cc_resources(struct platform_device *plat_dev)
dev_err(dev, "Invalid CC PIDR: PIDR0124=0x%08X != expected=0x%08X\n",
val, hw_rev->pidr_0124);
rc = -EINVAL;
- goto post_clk_err;
+ goto post_pm_err;
}
hw_rev_pidr = val;
@@ -392,7 +403,7 @@ static int init_cc_resources(struct platform_device *plat_dev)
dev_err(dev, "Invalid CC CIDR: CIDR0123=0x%08X != expected=0x%08X\n",
val, hw_rev->cidr_0123);
rc = -EINVAL;
- goto post_clk_err;
+ goto post_pm_err;
}
sig_cidr = val;
@@ -411,7 +422,7 @@ static int init_cc_resources(struct platform_device *plat_dev)
default:
dev_err(dev, "Unsupported engines configuration.\n");
rc = -EINVAL;
- goto post_clk_err;
+ goto post_pm_err;
}
/* Check security disable state */
@@ -437,14 +448,14 @@ static int init_cc_resources(struct platform_device *plat_dev)
new_drvdata);
if (rc) {
dev_err(dev, "Could not register to interrupt %d\n", irq);
- goto post_clk_err;
+ goto post_pm_err;
}
dev_dbg(dev, "Registered to IRQ: %d\n", irq);
rc = init_cc_regs(new_drvdata, true);
if (rc) {
dev_err(dev, "init_cc_regs failed\n");
- goto post_clk_err;
+ goto post_pm_err;
}
rc = cc_debugfs_init(new_drvdata);
@@ -483,12 +494,6 @@ static int init_cc_resources(struct platform_device *plat_dev)
goto post_req_mgr_err;
}
- rc = cc_pm_init(new_drvdata);
- if (rc) {
- dev_err(dev, "cc_pm_init failed\n");
- goto post_buf_mgr_err;
- }
-
/* Allocate crypto algs */
rc = cc_cipher_alloc(new_drvdata);
if (rc) {
@@ -509,15 +514,13 @@ static int init_cc_resources(struct platform_device *plat_dev)
goto post_hash_err;
}
- /* All set, we can allow autosuspend */
- cc_pm_go(new_drvdata);
-
/* If we got here and FIPS mode is enabled
* it means all FIPS test passed, so let TEE
* know we're good.
*/
cc_set_ree_fips_status(new_drvdata, true);
+ pm_runtime_put(dev);
return 0;
post_hash_err:
@@ -534,7 +537,10 @@ static int init_cc_resources(struct platform_device *plat_dev)
cc_debugfs_fini(new_drvdata);
post_regs_err:
fini_cc_regs(new_drvdata);
-post_clk_err:
+post_pm_err:
+ pm_runtime_put_noidle(dev);
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
clk_disable_unprepare(new_drvdata->clk);
return rc;
}
@@ -547,18 +553,21 @@ void fini_cc_regs(struct cc_drvdata *drvdata)
static void cleanup_cc_resources(struct platform_device *plat_dev)
{
+ struct device *dev = &plat_dev->dev;
struct cc_drvdata *drvdata =
(struct cc_drvdata *)platform_get_drvdata(plat_dev);
cc_aead_free(drvdata);
cc_hash_free(drvdata);
cc_cipher_free(drvdata);
- cc_pm_fini(drvdata);
cc_buffer_mgr_fini(drvdata);
cc_req_mgr_fini(drvdata);
cc_fips_fini(drvdata);
cc_debugfs_fini(drvdata);
fini_cc_regs(drvdata);
+ pm_runtime_put_noidle(dev);
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
clk_disable_unprepare(drvdata->clk);
}
@@ -158,7 +158,6 @@ struct cc_drvdata {
int std_bodies;
bool sec_disabled;
u32 comp_mask;
- bool pm_on;
};
struct cc_crypto_alg {
@@ -64,23 +64,15 @@ int cc_pm_resume(struct device *dev)
int cc_pm_get(struct device *dev)
{
- int rc = 0;
- struct cc_drvdata *drvdata = dev_get_drvdata(dev);
-
- if (drvdata->pm_on)
- rc = pm_runtime_get_sync(dev);
+ int rc = pm_runtime_get_sync(dev);
return (rc == 1 ? 0 : rc);
}
void cc_pm_put_suspend(struct device *dev)
{
- struct cc_drvdata *drvdata = dev_get_drvdata(dev);
-
- if (drvdata->pm_on) {
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
- }
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
}
bool cc_pm_is_dev_suspended(struct device *dev)
@@ -88,27 +80,3 @@ bool cc_pm_is_dev_suspended(struct device *dev)
/* check device state using runtime api */
return pm_runtime_suspended(dev);
}
-
-int cc_pm_init(struct cc_drvdata *drvdata)
-{
- struct device *dev = drvdata_to_dev(drvdata);
-
- /* must be before the enabling to avoid redundant suspending */
- pm_runtime_set_autosuspend_delay(dev, CC_SUSPEND_TIMEOUT);
- pm_runtime_use_autosuspend(dev);
- /* set us as active - note we won't do PM ops until cc_pm_go()! */
- return pm_runtime_set_active(dev);
-}
-
-/* enable the PM module*/
-void cc_pm_go(struct cc_drvdata *drvdata)
-{
- pm_runtime_enable(drvdata_to_dev(drvdata));
- drvdata->pm_on = true;
-}
-
-void cc_pm_fini(struct cc_drvdata *drvdata)
-{
- pm_runtime_disable(drvdata_to_dev(drvdata));
- drvdata->pm_on = false;
-}
@@ -15,9 +15,6 @@
extern const struct dev_pm_ops ccree_pm;
-int cc_pm_init(struct cc_drvdata *drvdata);
-void cc_pm_go(struct cc_drvdata *drvdata);
-void cc_pm_fini(struct cc_drvdata *drvdata);
int cc_pm_suspend(struct device *dev);
int cc_pm_resume(struct device *dev);
int cc_pm_get(struct device *dev);
@@ -26,15 +23,6 @@ bool cc_pm_is_dev_suspended(struct device *dev);
#else
-static inline int cc_pm_init(struct cc_drvdata *drvdata)
-{
- return 0;
-}
-
-static inline void cc_pm_go(struct cc_drvdata *drvdata) {}
-
-static inline void cc_pm_fini(struct cc_drvdata *drvdata) {}
-
static inline int cc_pm_get(struct device *dev)
{
return 0;
Currently, a large part of the probe function runs before Runtime PM is enabled. As the driver manages the device's clock manually, this may work fine on some systems, but may break on platforms with a more complex power hierarchy. Fix this by moving the initialization of Runtime PM before the first register access (in cc_wait_for_reset_completion()), and putting the device to sleep only after the last access (in cc_set_ree_fips_status()). This allows to remove the pm_on flag, which was used to track manually if Runtime PM had been enabled or not. Remove the cc_pm_{init,go,fini}() wrappers, as they are called only once, and obscure operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v2: - New. drivers/crypto/ccree/cc_driver.c | 43 +++++++++++++++++++------------- drivers/crypto/ccree/cc_driver.h | 1 - drivers/crypto/ccree/cc_pm.c | 38 +++------------------------- drivers/crypto/ccree/cc_pm.h | 12 --------- 4 files changed, 29 insertions(+), 65 deletions(-)