@@ -19,10 +19,6 @@ Required Properties:
slave device on the I2C bus. The main address is mandatory, others are
optional and revert to defaults if not specified.
- - hpd-gpios: References to the GPIOs that control the HDMI hot-plug
- detection pins, one per HDMI input. The active flag indicates the GPIO
- level that enables hot-plug detection.
-
The device node must contain one 'port' child node per device input and output
port, in accordance with the video interface bindings defined in
Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
@@ -37,6 +33,9 @@ The digital output port node must contain at least one endpoint.
Optional Properties:
+ - hpd-gpios: References to the GPIOs that control the HDMI hot-plug
+ detection pins, one per HDMI input. The active flag indicates the GPIO
+ level that enables hot-plug detection.
- reset-gpios: Reference to the GPIO connected to the device's reset pin.
- default-input: Select which input is selected after reset.
- reg-names : Names of maps with programmable addresses.
As of [1] the hpd-gpios property is optional, document it as such. 1. commit 269bd1324fbfaa52 ("[media] media: adv7604: improve usage of gpiod API") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> --- Documentation/devicetree/bindings/media/i2c/adv7604.txt | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)