diff mbox series

[v2,2/3] ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board

Message ID 20200907155541.2011-3-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show
Series iWave G21D-Q7 enable flash, CAN and SD2 LED | expand

Commit Message

Lad Prabhakar Sept. 7, 2020, 3:55 p.m. UTC 
This patch enables CAN1 interface exposed through connector J20 on the
carrier board.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
---
 arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

Comments

Geert Uytterhoeven Sept. 10, 2020, 9:04 a.m. UTC | #1 
On Mon, Sep 7, 2020 at 5:56 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> This patch enables CAN1 interface exposed through connector J20 on the
> carrier board.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>

Thanks for the update, will queue in renesas-devel for v5.10.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index 818f1a850c62..66881a473d6c 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -198,6 +198,13 @@ 
 	};
 };
 
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 &cmt0 {
 	status = "okay";
 };
@@ -214,6 +221,15 @@ 
 	};
 };
 
+&gpio1 {
+	can-trx-en-gpio{
+		gpio-hog;
+		gpios = <28 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can-trx-en-gpio";
+	};
+};
+
 &hsusb {
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
@@ -287,6 +303,11 @@ 
 		function = "tpu0";
 	};
 
+	can1_pins: can1 {
+		groups = "can1_data_b";
+		function = "can1";
+	};
+
 	i2c2_pins: i2c2 {
 		groups = "i2c2_b";
 		function = "i2c2";