diff mbox series

[v2] tests: Provide {un,}bind testing

Message ID 20200916141815.1481807-1-kieran.bingham@ideasonboard.com (mailing list archive)
State New
Delegated to: Kieran Bingham
Headers show
Series [v2] tests: Provide {un,}bind testing | expand

Commit Message

Kieran Bingham Sept. 16, 2020, 2:18 p.m. UTC 
Perform unbind-bind testing of the VSP devices to validate
successful removal of the drivers.

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---

v2:
 - Semi-colons removed
 - duplicated tests removed.

This is the updated patch, I intend to push to master.

--
Kieran


 tests/vsp-unit-test-0026.sh | 55 +++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100755 tests/vsp-unit-test-0026.sh

Comments

Laurent Pinchart Sept. 17, 2020, 12:58 a.m. UTC | #1 
Hi Kieran,

Thank you for the patch.

On Wed, Sep 16, 2020 at 03:18:15PM +0100, Kieran Bingham wrote:
> Perform unbind-bind testing of the VSP devices to validate
> successful removal of the drivers.

This unbinds all VSP instances, including the ones used by the DU and
not exposed through V4L2. What happens to the display ?

> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> 
> v2:
>  - Semi-colons removed
>  - duplicated tests removed.
> 
> This is the updated patch, I intend to push to master.
> 
> --
> Kieran
> 
> 
>  tests/vsp-unit-test-0026.sh | 55 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100755 tests/vsp-unit-test-0026.sh
> 
> diff --git a/tests/vsp-unit-test-0026.sh b/tests/vsp-unit-test-0026.sh
> new file mode 100755
> index 000000000000..0e013cec881b
> --- /dev/null
> +++ b/tests/vsp-unit-test-0026.sh
> @@ -0,0 +1,55 @@
> +#!/bin/sh
> +
> +#
> +# Test unbinding and binding all VSP1 devices, performing a simple
> +# copy test to validate the hardware afterwards.
> +#
> +
> +. ./vsp-lib.sh
> +
> +features="rpf.0 wpf.0"
> +
> +vsp1_driver=/sys/bus/platform/drivers/vsp1
> +vsps=$(cd /sys/bus/platform/devices/; ls | grep vsp)
> +
> +unbind_vsp() {
> +	echo $1 > $vsp1_driver/unbind
> +}
> +
> +bind_vsp() {
> +	echo $1 > $vsp1_driver/bind
> +}
> +
> +# Input is directly copied to the output. No change in format or size.
> +test_copy() {
> +	local format=$1
> +	local insize=$2
> +
> +	test_start "simple hardware validation after unbind/bind cycles"
> +
> +	pipe_configure rpf-wpf 0 0
> +	format_configure rpf-wpf 0 0 $format $insize $format
> +
> +	vsp_runner rpf.0 &
> +	vsp_runner wpf.0
> +
> +	local result=$(compare_frames)
> +
> +	test_complete $result
> +}
> +
> +test_main() {
> +	local format
> +
> +	# Unbind and rebind VSPs individually
> +	for v in $vsps; do
> +		unbind_vsp $v
> +		bind_vsp $v
> +	done
> +
> +	# Perform a simple copy test to validate HW is alive
> +	test_copy RGB24 128x128
> +}
> +
> +test_init $0 "$features"
> +test_run
Kieran Bingham Sept. 17, 2020, 4:07 p.m. UTC | #2 
Hi Laurent,

On 17/09/2020 01:58, Laurent Pinchart wrote:
> Hi Kieran,
> 
> Thank you for the patch.
> 
> On Wed, Sep 16, 2020 at 03:18:15PM +0100, Kieran Bingham wrote:
>> Perform unbind-bind testing of the VSP devices to validate
>> successful removal of the drivers.
> 
> This unbinds all VSP instances, including the ones used by the DU and
> not exposed through V4L2. What happens to the display ?

Bad things :-)

Is that something that 'can' be fixed?
Or goes into the category of "shouldn't ever happen".

Although I think the reason for adding this test in the first place was
because of reports of someone testing bind/unbind and hitting failures.


After unbind/bind, the display is left blank. There is no 'issue' until
something tries to use the display again: where we get:

[  273.468961] vsp1 fea20000.vsp: failed to reset wpf.1
[  273.474156] vsp1 fea20000.vsp: DRM pipeline stop timeout
[  273.479595] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000038
[  273.488627] Mem abort info:
[  273.491570]   ESR = 0x96000004
[  273.495657]   EC = 0x25: DABT (current EL), IL = 32 bits
[  273.501618]   SET = 0, FnV = 0
[  273.505093]   EA = 0, S1PTW = 0
[  273.509022] Data abort info:
[  273.512213]   ISV = 0, ISS = 0x00000004
[  273.516685]   CM = 0, WnR = 0
[  273.519891] user pgtable: 4k pages, 48-bit VAs, pgdp=000000072faf0000
[  273.527015] [0000000000000038] pgd=0000000000000000, p4d=0000000000000000
[  273.534399] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[  273.540041] CPU: 0 PID: 1338 Comm: kmstest Not tainted
5.9.0-rc1-arm64-renesas-00264-g939a20a7f8b4 #339
[  273.549523] Hardware name: Renesas Salvator-X 2nd version board based
on r8a77951 (DT)
[  273.557517] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
[  273.563152] pc : vsp1_du_setup_lif+0x3fc/0x4d0
[  273.567638] lr : vsp1_du_setup_lif+0x4cc/0x4d0
[  273.572121] sp : ffff80001489b900
[  273.575465] x29: ffff80001489b900 x28: 000000000000006f
[  273.580829] x27: ffff0006fa105080 x26: 0000000000000000
[  273.586192] x25: 0000000000000000 x24: ffff0006f0f896c0
[  273.591555] x23: 0000000000000378 x22: ffff0006f81c83f8
[  273.596917] x21: ffff0006f81c8420 x20: 0000000000000001
[  273.602280] x19: 0000000000000000 x18: 0000000000000010
[  273.607642] x17: 0000000000000000 x16: 0000000000000000
[  273.613004] x15: 0000000000aaaaaa x14: 0000000000000020
[  273.618366] x13: 00000000ffffffff x12: ffff800010b68ac8
[  273.623728] x11: ffffffffffffffff x10: ffff800010ef8018
[  273.629090] x9 : 0000000000000001 x8 : 0000000000000000
[  273.634452] x7 : 0000000000000001 x6 : 0000000000000001
[  273.639814] x5 : dead000000000100 x4 : dead000000000100
[  273.645176] x3 : dead000000000122 x2 : b1d0872bc242a400
[  273.650538] x1 : 0000000000000000 x0 : 0000000000000000
[  273.655900] Call trace:
[  273.658371]  vsp1_du_setup_lif+0x3fc/0x4d0
[  273.662512]  rcar_du_vsp_disable+0x1c/0x28
[  273.666648]  rcar_du_crtc_atomic_disable+0x2c4/0x3e0
[  273.671663]  drm_atomic_helper_commit_modeset_disables+0x37c/0x420
[  273.677902]  rcar_du_atomic_commit_tail+0x90/0xd8
[  273.684043]  commit_tail+0x9c/0x180
[  273.688952]  drm_atomic_helper_commit+0x168/0x198
[  273.695096]  drm_atomic_commit+0x48/0x58
[  273.700437]  drm_mode_atomic_ioctl+0x9fc/0xb08
[  273.706278]  drm_ioctl_kernel+0xb8/0x110
[  273.711563]  drm_ioctl+0x230/0x470
[  273.716293]  __arm64_sys_ioctl+0x8c/0xd0
[  273.721520]  el0_svc_common.constprop.0+0x70/0x180
[  273.727629]  do_el0_svc+0x20/0x80
[  273.732219]  el0_sync_handler+0x94/0x1b0
[  273.737386]  el0_sync+0x140/0x180
[  273.741943] Code: 8b1c0ed6 f9414ec0 b90262df f901b6df (a9438402)
[  273.749313] ---[ end trace 67e85a6fa8c4fc15 ]---

We don't actually have any bind/unbind hooks in the vsp1 so I guess
that's something for me to investigate next to make sure we shut the
device down correctly...

--
Kieran


> 
>> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
>> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>> ---
>>
>> v2:
>>  - Semi-colons removed
>>  - duplicated tests removed.
>>
>> This is the updated patch, I intend to push to master.
>>
>> --
>> Kieran
>>
>>
>>  tests/vsp-unit-test-0026.sh | 55 +++++++++++++++++++++++++++++++++++++
>>  1 file changed, 55 insertions(+)
>>  create mode 100755 tests/vsp-unit-test-0026.sh
>>
>> diff --git a/tests/vsp-unit-test-0026.sh b/tests/vsp-unit-test-0026.sh
>> new file mode 100755
>> index 000000000000..0e013cec881b
>> --- /dev/null
>> +++ b/tests/vsp-unit-test-0026.sh
>> @@ -0,0 +1,55 @@
>> +#!/bin/sh
>> +
>> +#
>> +# Test unbinding and binding all VSP1 devices, performing a simple
>> +# copy test to validate the hardware afterwards.
>> +#
>> +
>> +. ./vsp-lib.sh
>> +
>> +features="rpf.0 wpf.0"
>> +
>> +vsp1_driver=/sys/bus/platform/drivers/vsp1
>> +vsps=$(cd /sys/bus/platform/devices/; ls | grep vsp)
>> +
>> +unbind_vsp() {
>> +	echo $1 > $vsp1_driver/unbind
>> +}
>> +
>> +bind_vsp() {
>> +	echo $1 > $vsp1_driver/bind
>> +}
>> +
>> +# Input is directly copied to the output. No change in format or size.
>> +test_copy() {
>> +	local format=$1
>> +	local insize=$2
>> +
>> +	test_start "simple hardware validation after unbind/bind cycles"
>> +
>> +	pipe_configure rpf-wpf 0 0
>> +	format_configure rpf-wpf 0 0 $format $insize $format
>> +
>> +	vsp_runner rpf.0 &
>> +	vsp_runner wpf.0
>> +
>> +	local result=$(compare_frames)
>> +
>> +	test_complete $result
>> +}
>> +
>> +test_main() {
>> +	local format
>> +
>> +	# Unbind and rebind VSPs individually
>> +	for v in $vsps; do
>> +		unbind_vsp $v
>> +		bind_vsp $v
>> +	done
>> +
>> +	# Perform a simple copy test to validate HW is alive
>> +	test_copy RGB24 128x128
>> +}
>> +
>> +test_init $0 "$features"
>> +test_run
>
Laurent Pinchart Sept. 17, 2020, 4:10 p.m. UTC | #3 
On Thu, Sep 17, 2020 at 05:07:12PM +0100, Kieran Bingham wrote:
> Hi Laurent,
> 
> On 17/09/2020 01:58, Laurent Pinchart wrote:
> > Hi Kieran,
> > 
> > Thank you for the patch.
> > 
> > On Wed, Sep 16, 2020 at 03:18:15PM +0100, Kieran Bingham wrote:
> >> Perform unbind-bind testing of the VSP devices to validate
> >> successful removal of the drivers.
> > 
> > This unbinds all VSP instances, including the ones used by the DU and
> > not exposed through V4L2. What happens to the display ?
> 
> Bad things :-)
> 
> Is that something that 'can' be fixed?

Only with lots of effort. I wouldn't bother for now to be honest. Could
we however skip unbinding the vspd instances in this test ?

> Or goes into the category of "shouldn't ever happen".
> 
> Although I think the reason for adding this test in the first place was
> because of reports of someone testing bind/unbind and hitting failures.
> 
> After unbind/bind, the display is left blank. There is no 'issue' until
> something tries to use the display again: where we get:
> 
> [  273.468961] vsp1 fea20000.vsp: failed to reset wpf.1
> [  273.474156] vsp1 fea20000.vsp: DRM pipeline stop timeout
> [  273.479595] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038
> [  273.488627] Mem abort info:
> [  273.491570]   ESR = 0x96000004
> [  273.495657]   EC = 0x25: DABT (current EL), IL = 32 bits
> [  273.501618]   SET = 0, FnV = 0
> [  273.505093]   EA = 0, S1PTW = 0
> [  273.509022] Data abort info:
> [  273.512213]   ISV = 0, ISS = 0x00000004
> [  273.516685]   CM = 0, WnR = 0
> [  273.519891] user pgtable: 4k pages, 48-bit VAs, pgdp=000000072faf0000
> [  273.527015] [0000000000000038] pgd=0000000000000000, p4d=0000000000000000
> [  273.534399] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> [  273.540041] CPU: 0 PID: 1338 Comm: kmstest Not tainted 5.9.0-rc1-arm64-renesas-00264-g939a20a7f8b4 #339
> [  273.549523] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
> [  273.557517] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
> [  273.563152] pc : vsp1_du_setup_lif+0x3fc/0x4d0
> [  273.567638] lr : vsp1_du_setup_lif+0x4cc/0x4d0
> [  273.572121] sp : ffff80001489b900
> [  273.575465] x29: ffff80001489b900 x28: 000000000000006f
> [  273.580829] x27: ffff0006fa105080 x26: 0000000000000000
> [  273.586192] x25: 0000000000000000 x24: ffff0006f0f896c0
> [  273.591555] x23: 0000000000000378 x22: ffff0006f81c83f8
> [  273.596917] x21: ffff0006f81c8420 x20: 0000000000000001
> [  273.602280] x19: 0000000000000000 x18: 0000000000000010
> [  273.607642] x17: 0000000000000000 x16: 0000000000000000
> [  273.613004] x15: 0000000000aaaaaa x14: 0000000000000020
> [  273.618366] x13: 00000000ffffffff x12: ffff800010b68ac8
> [  273.623728] x11: ffffffffffffffff x10: ffff800010ef8018
> [  273.629090] x9 : 0000000000000001 x8 : 0000000000000000
> [  273.634452] x7 : 0000000000000001 x6 : 0000000000000001
> [  273.639814] x5 : dead000000000100 x4 : dead000000000100
> [  273.645176] x3 : dead000000000122 x2 : b1d0872bc242a400
> [  273.650538] x1 : 0000000000000000 x0 : 0000000000000000
> [  273.655900] Call trace:
> [  273.658371]  vsp1_du_setup_lif+0x3fc/0x4d0
> [  273.662512]  rcar_du_vsp_disable+0x1c/0x28
> [  273.666648]  rcar_du_crtc_atomic_disable+0x2c4/0x3e0
> [  273.671663]  drm_atomic_helper_commit_modeset_disables+0x37c/0x420
> [  273.677902]  rcar_du_atomic_commit_tail+0x90/0xd8
> [  273.684043]  commit_tail+0x9c/0x180
> [  273.688952]  drm_atomic_helper_commit+0x168/0x198
> [  273.695096]  drm_atomic_commit+0x48/0x58
> [  273.700437]  drm_mode_atomic_ioctl+0x9fc/0xb08
> [  273.706278]  drm_ioctl_kernel+0xb8/0x110
> [  273.711563]  drm_ioctl+0x230/0x470
> [  273.716293]  __arm64_sys_ioctl+0x8c/0xd0
> [  273.721520]  el0_svc_common.constprop.0+0x70/0x180
> [  273.727629]  do_el0_svc+0x20/0x80
> [  273.732219]  el0_sync_handler+0x94/0x1b0
> [  273.737386]  el0_sync+0x140/0x180
> [  273.741943] Code: 8b1c0ed6 f9414ec0 b90262df f901b6df (a9438402)
> [  273.749313] ---[ end trace 67e85a6fa8c4fc15 ]---
> 
> We don't actually have any bind/unbind hooks in the vsp1 so I guess
> that's something for me to investigate next to make sure we shut the
> device down correctly...
>
> >> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
> >> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> >> ---
> >>
> >> v2:
> >>  - Semi-colons removed
> >>  - duplicated tests removed.
> >>
> >> This is the updated patch, I intend to push to master.
> >>
> >> --
> >> Kieran
> >>
> >>
> >>  tests/vsp-unit-test-0026.sh | 55 +++++++++++++++++++++++++++++++++++++
> >>  1 file changed, 55 insertions(+)
> >>  create mode 100755 tests/vsp-unit-test-0026.sh
> >>
> >> diff --git a/tests/vsp-unit-test-0026.sh b/tests/vsp-unit-test-0026.sh
> >> new file mode 100755
> >> index 000000000000..0e013cec881b
> >> --- /dev/null
> >> +++ b/tests/vsp-unit-test-0026.sh
> >> @@ -0,0 +1,55 @@
> >> +#!/bin/sh
> >> +
> >> +#
> >> +# Test unbinding and binding all VSP1 devices, performing a simple
> >> +# copy test to validate the hardware afterwards.
> >> +#
> >> +
> >> +. ./vsp-lib.sh
> >> +
> >> +features="rpf.0 wpf.0"
> >> +
> >> +vsp1_driver=/sys/bus/platform/drivers/vsp1
> >> +vsps=$(cd /sys/bus/platform/devices/; ls | grep vsp)
> >> +
> >> +unbind_vsp() {
> >> +	echo $1 > $vsp1_driver/unbind
> >> +}
> >> +
> >> +bind_vsp() {
> >> +	echo $1 > $vsp1_driver/bind
> >> +}
> >> +
> >> +# Input is directly copied to the output. No change in format or size.
> >> +test_copy() {
> >> +	local format=$1
> >> +	local insize=$2
> >> +
> >> +	test_start "simple hardware validation after unbind/bind cycles"
> >> +
> >> +	pipe_configure rpf-wpf 0 0
> >> +	format_configure rpf-wpf 0 0 $format $insize $format
> >> +
> >> +	vsp_runner rpf.0 &
> >> +	vsp_runner wpf.0
> >> +
> >> +	local result=$(compare_frames)
> >> +
> >> +	test_complete $result
> >> +}
> >> +
> >> +test_main() {
> >> +	local format
> >> +
> >> +	# Unbind and rebind VSPs individually
> >> +	for v in $vsps; do
> >> +		unbind_vsp $v
> >> +		bind_vsp $v
> >> +	done
> >> +
> >> +	# Perform a simple copy test to validate HW is alive
> >> +	test_copy RGB24 128x128
> >> +}
> >> +
> >> +test_init $0 "$features"
> >> +test_run
Kieran Bingham Sept. 17, 2020, 4:12 p.m. UTC | #4 
Hi Laurent,

On 17/09/2020 17:10, Laurent Pinchart wrote:
> On Thu, Sep 17, 2020 at 05:07:12PM +0100, Kieran Bingham wrote:
>> Hi Laurent,
>>
>> On 17/09/2020 01:58, Laurent Pinchart wrote:
>>> Hi Kieran,
>>>
>>> Thank you for the patch.
>>>
>>> On Wed, Sep 16, 2020 at 03:18:15PM +0100, Kieran Bingham wrote:
>>>> Perform unbind-bind testing of the VSP devices to validate
>>>> successful removal of the drivers.
>>>
>>> This unbinds all VSP instances, including the ones used by the DU and
>>> not exposed through V4L2. What happens to the display ?
>>
>> Bad things :-)
>>
>> Is that something that 'can' be fixed?
> 
> Only with lots of effort. I wouldn't bother for now to be honest. Could
> we however skip unbinding the vspd instances in this test ?

Sure, I'll resolve that tomorrow.

I fear that may miss the original intent of the test though, I'll check
back through the original bug reports tomorrow too.

--
Kieran


> 
>> Or goes into the category of "shouldn't ever happen".
>>
>> Although I think the reason for adding this test in the first place was
>> because of reports of someone testing bind/unbind and hitting failures.
>>
>> After unbind/bind, the display is left blank. There is no 'issue' until
>> something tries to use the display again: where we get:
>>
>> [  273.468961] vsp1 fea20000.vsp: failed to reset wpf.1
>> [  273.474156] vsp1 fea20000.vsp: DRM pipeline stop timeout
>> [  273.479595] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038
>> [  273.488627] Mem abort info:
>> [  273.491570]   ESR = 0x96000004
>> [  273.495657]   EC = 0x25: DABT (current EL), IL = 32 bits
>> [  273.501618]   SET = 0, FnV = 0
>> [  273.505093]   EA = 0, S1PTW = 0
>> [  273.509022] Data abort info:
>> [  273.512213]   ISV = 0, ISS = 0x00000004
>> [  273.516685]   CM = 0, WnR = 0
>> [  273.519891] user pgtable: 4k pages, 48-bit VAs, pgdp=000000072faf0000
>> [  273.527015] [0000000000000038] pgd=0000000000000000, p4d=0000000000000000
>> [  273.534399] Internal error: Oops: 96000004 [#1] PREEMPT SMP
>> [  273.540041] CPU: 0 PID: 1338 Comm: kmstest Not tainted 5.9.0-rc1-arm64-renesas-00264-g939a20a7f8b4 #339
>> [  273.549523] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
>> [  273.557517] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
>> [  273.563152] pc : vsp1_du_setup_lif+0x3fc/0x4d0
>> [  273.567638] lr : vsp1_du_setup_lif+0x4cc/0x4d0
>> [  273.572121] sp : ffff80001489b900
>> [  273.575465] x29: ffff80001489b900 x28: 000000000000006f
>> [  273.580829] x27: ffff0006fa105080 x26: 0000000000000000
>> [  273.586192] x25: 0000000000000000 x24: ffff0006f0f896c0
>> [  273.591555] x23: 0000000000000378 x22: ffff0006f81c83f8
>> [  273.596917] x21: ffff0006f81c8420 x20: 0000000000000001
>> [  273.602280] x19: 0000000000000000 x18: 0000000000000010
>> [  273.607642] x17: 0000000000000000 x16: 0000000000000000
>> [  273.613004] x15: 0000000000aaaaaa x14: 0000000000000020
>> [  273.618366] x13: 00000000ffffffff x12: ffff800010b68ac8
>> [  273.623728] x11: ffffffffffffffff x10: ffff800010ef8018
>> [  273.629090] x9 : 0000000000000001 x8 : 0000000000000000
>> [  273.634452] x7 : 0000000000000001 x6 : 0000000000000001
>> [  273.639814] x5 : dead000000000100 x4 : dead000000000100
>> [  273.645176] x3 : dead000000000122 x2 : b1d0872bc242a400
>> [  273.650538] x1 : 0000000000000000 x0 : 0000000000000000
>> [  273.655900] Call trace:
>> [  273.658371]  vsp1_du_setup_lif+0x3fc/0x4d0
>> [  273.662512]  rcar_du_vsp_disable+0x1c/0x28
>> [  273.666648]  rcar_du_crtc_atomic_disable+0x2c4/0x3e0
>> [  273.671663]  drm_atomic_helper_commit_modeset_disables+0x37c/0x420
>> [  273.677902]  rcar_du_atomic_commit_tail+0x90/0xd8
>> [  273.684043]  commit_tail+0x9c/0x180
>> [  273.688952]  drm_atomic_helper_commit+0x168/0x198
>> [  273.695096]  drm_atomic_commit+0x48/0x58
>> [  273.700437]  drm_mode_atomic_ioctl+0x9fc/0xb08
>> [  273.706278]  drm_ioctl_kernel+0xb8/0x110
>> [  273.711563]  drm_ioctl+0x230/0x470
>> [  273.716293]  __arm64_sys_ioctl+0x8c/0xd0
>> [  273.721520]  el0_svc_common.constprop.0+0x70/0x180
>> [  273.727629]  do_el0_svc+0x20/0x80
>> [  273.732219]  el0_sync_handler+0x94/0x1b0
>> [  273.737386]  el0_sync+0x140/0x180
>> [  273.741943] Code: 8b1c0ed6 f9414ec0 b90262df f901b6df (a9438402)
>> [  273.749313] ---[ end trace 67e85a6fa8c4fc15 ]---
>>
>> We don't actually have any bind/unbind hooks in the vsp1 so I guess
>> that's something for me to investigate next to make sure we shut the
>> device down correctly...
>>
>>>> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
>>>> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>>>> ---
>>>>
>>>> v2:
>>>>  - Semi-colons removed
>>>>  - duplicated tests removed.
>>>>
>>>> This is the updated patch, I intend to push to master.
>>>>
>>>> --
>>>> Kieran
>>>>
>>>>
>>>>  tests/vsp-unit-test-0026.sh | 55 +++++++++++++++++++++++++++++++++++++
>>>>  1 file changed, 55 insertions(+)
>>>>  create mode 100755 tests/vsp-unit-test-0026.sh
>>>>
>>>> diff --git a/tests/vsp-unit-test-0026.sh b/tests/vsp-unit-test-0026.sh
>>>> new file mode 100755
>>>> index 000000000000..0e013cec881b
>>>> --- /dev/null
>>>> +++ b/tests/vsp-unit-test-0026.sh
>>>> @@ -0,0 +1,55 @@
>>>> +#!/bin/sh
>>>> +
>>>> +#
>>>> +# Test unbinding and binding all VSP1 devices, performing a simple
>>>> +# copy test to validate the hardware afterwards.
>>>> +#
>>>> +
>>>> +. ./vsp-lib.sh
>>>> +
>>>> +features="rpf.0 wpf.0"
>>>> +
>>>> +vsp1_driver=/sys/bus/platform/drivers/vsp1
>>>> +vsps=$(cd /sys/bus/platform/devices/; ls | grep vsp)
>>>> +
>>>> +unbind_vsp() {
>>>> +	echo $1 > $vsp1_driver/unbind
>>>> +}
>>>> +
>>>> +bind_vsp() {
>>>> +	echo $1 > $vsp1_driver/bind
>>>> +}
>>>> +
>>>> +# Input is directly copied to the output. No change in format or size.
>>>> +test_copy() {
>>>> +	local format=$1
>>>> +	local insize=$2
>>>> +
>>>> +	test_start "simple hardware validation after unbind/bind cycles"
>>>> +
>>>> +	pipe_configure rpf-wpf 0 0
>>>> +	format_configure rpf-wpf 0 0 $format $insize $format
>>>> +
>>>> +	vsp_runner rpf.0 &
>>>> +	vsp_runner wpf.0
>>>> +
>>>> +	local result=$(compare_frames)
>>>> +
>>>> +	test_complete $result
>>>> +}
>>>> +
>>>> +test_main() {
>>>> +	local format
>>>> +
>>>> +	# Unbind and rebind VSPs individually
>>>> +	for v in $vsps; do
>>>> +		unbind_vsp $v
>>>> +		bind_vsp $v
>>>> +	done
>>>> +
>>>> +	# Perform a simple copy test to validate HW is alive
>>>> +	test_copy RGB24 128x128
>>>> +}
>>>> +
>>>> +test_init $0 "$features"
>>>> +test_run
>
diff mbox series

Patch

diff --git a/tests/vsp-unit-test-0026.sh b/tests/vsp-unit-test-0026.sh
new file mode 100755
index 000000000000..0e013cec881b
--- /dev/null
+++ b/tests/vsp-unit-test-0026.sh
@@ -0,0 +1,55 @@ 
+#!/bin/sh
+
+#
+# Test unbinding and binding all VSP1 devices, performing a simple
+# copy test to validate the hardware afterwards.
+#
+
+. ./vsp-lib.sh
+
+features="rpf.0 wpf.0"
+
+vsp1_driver=/sys/bus/platform/drivers/vsp1
+vsps=$(cd /sys/bus/platform/devices/; ls | grep vsp)
+
+unbind_vsp() {
+	echo $1 > $vsp1_driver/unbind
+}
+
+bind_vsp() {
+	echo $1 > $vsp1_driver/bind
+}
+
+# Input is directly copied to the output. No change in format or size.
+test_copy() {
+	local format=$1
+	local insize=$2
+
+	test_start "simple hardware validation after unbind/bind cycles"
+
+	pipe_configure rpf-wpf 0 0
+	format_configure rpf-wpf 0 0 $format $insize $format
+
+	vsp_runner rpf.0 &
+	vsp_runner wpf.0
+
+	local result=$(compare_frames)
+
+	test_complete $result
+}
+
+test_main() {
+	local format
+
+	# Unbind and rebind VSPs individually
+	for v in $vsps; do
+		unbind_vsp $v
+		bind_vsp $v
+	done
+
+	# Perform a simple copy test to validate HW is alive
+	test_copy RGB24 128x128
+}
+
+test_init $0 "$features"
+test_run