diff mbox series

[RESEND,v2,2/2] dt-bindings: can: rcar_can: Document r8a774e1 support

Message ID 20201005081319.29322-3-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show
Series dt-bindings: can: document R8A774E1 | expand

Commit Message

Prabhakar Oct. 5, 2020, 8:13 a.m. UTC 
Document SoC specific bindings for RZ/G2H (R8A774E1) SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/net/can/rcar_can.txt | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
index 85c6551b602a..21d6780874cc 100644
--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@@ -9,6 +9,7 @@  Required properties:
 	      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
 	      "renesas,can-r8a774b1" if CAN controller is a part of R8A774B1 SoC.
 	      "renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC.
+	      "renesas,can-r8a774e1" if CAN controller is a part of R8A774E1 SoC.
 	      "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
 	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
 	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
@@ -37,8 +38,8 @@  Required properties:
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must be "default".
 
-Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796,
-R8A77965, R8A77990, and R8A77995:
+Required properties for R8A774A1, R8A774B1, R8A774C0, R8A774E1, R8A7795,
+R8A7796, R8A77965, R8A77990, and R8A77995:
 For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
 be used by both CAN and CAN FD controller at the same time. It needs to be
 scaled to maximum frequency if any of these controllers use it. This is done