diff mbox series

[V2,3/9] arm64: dts: renesas: beacon: Configure Audio CODEC clocks

Message ID 20201224170502.2254683-3-aford173@gmail.com (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show
Series [V2,1/9] arm64: dts: renesas: beacon kit: Configure programmable clocks | expand

Commit Message

Adam Ford Dec. 24, 2020, 5:04 p.m. UTC 
With the newly added configurable clock options, the audio CODEC can
configure the mclk automatically.  Add the reference to the versaclock.
Since the devices on I2C5 can communicate at 400KHz, let's also increase
that too

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2:  Remove the un-used clock-names reference.
     Base on: https://patchwork.kernel.org/project/alsa-devel/patch/20201217162740.1452000-1-aford173@gmail.com/

Comments

Geert Uytterhoeven Jan. 8, 2021, 1:41 p.m. UTC | #1 
On Thu, Dec 24, 2020 at 6:05 PM Adam Ford <aford173@gmail.com> wrote:
> With the newly added configurable clock options, the audio CODEC can
> configure the mclk automatically.  Add the reference to the versaclock.
> Since the devices on I2C5 can communicate at 400KHz, let's also increase
> that too
>
> Signed-off-by: Adam Ford <aford173@gmail.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v5.12.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 4e86d308d07e..dc5e05d7a792 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -385,13 +385,14 @@  &i2c0 {
 
 &i2c5 {
 	status = "okay";
-	clock-frequency = <100000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c5_pins>;
 	pinctrl-names = "default";
 
 	codec: wm8962@1a {
 		compatible = "wlf,wm8962";
 		reg = <0x1a>;
+		clocks = <&versaclock6_bb 3>;
 		DCVDD-supply = <&reg_audio>;
 		DBVDD-supply = <&reg_audio>;
 		AVDD-supply = <&reg_audio>;