diff mbox series

[V2,9/9] arm64: dts: renesas: beacon: Increase sdhi speeds

Message ID 20201224170502.2254683-9-aford173@gmail.com (mailing list archive)
State Under Review
Delegated to: Geert Uytterhoeven
Headers show
Series [V2,1/9] arm64: dts: renesas: beacon kit: Configure programmable clocks | expand

Commit Message

Adam Ford Dec. 24, 2020, 5:05 p.m. UTC 
The eMMC can run at hs400 and the WiFi chip can run at sdr104.
Set the respective flags to push the sdhi faster.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2:  New to series

Comments

Geert Uytterhoeven Jan. 8, 2021, 2:02 p.m. UTC | #1 
Hi Adam,

On Thu, Dec 24, 2020 at 6:05 PM Adam Ford <aford173@gmail.com> wrote:
> The eMMC can run at hs400 and the WiFi chip can run at sdr104.
> Set the respective flags to push the sdhi faster.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>

Thanks for your patch!

> --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
> +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
> @@ -271,8 +271,9 @@ &scif2 {
>  };
>
>  &sdhi2 {
> -       pinctrl-names = "default";
>         pinctrl-0 = <&sdhi2_pins>;
> +       pinctrl-1 = <&sdhi2_pins>;
> +       pinctrl-names = "default", "state_uhs";
>         bus-width = <4>;
>         vmmc-supply = <&reg_3p3v>;
>         vqmmc-supply = <&reg_1p8v>;
> @@ -281,6 +282,8 @@ &sdhi2 {
>         pm-ignore-notify;
>         keep-power-in-suspend;
>         mmc-pwrseq = <&wlan_pwrseq>;
> +       sd-uhs-sdr50;
> +       sd-uhs-sdr104;
>         status = "okay";
>         #address-cells = <1>;
>         #size-cells = <0>;

The HS400 change was accidentally part of "[PATCH V2 5/9] arm64: dts:
renesas: beacon: Cleanup USB References":

| @@ -315,16 +306,12 @@ &sdhi3 {
|   vmmc-supply = <&reg_3p3v>;
|   vqmmc-supply = <&reg_1p8v>;
|   bus-width = <8>;
| - mmc-hs200-1_8v;
| + mmc-hs400-1_8v;
|   non-removable;
|   fixed-emmc-driver-type = <1>;
|   status = "okay";

You probably want to keep, not replace, the "mmc-hs200-1_8v" property,
though.

With that fixed:
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index b34ffa1e77fa..56bdd80e36d0 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -271,8 +271,9 @@  &scif2 {
 };
 
 &sdhi2 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins>;
+	pinctrl-names = "default", "state_uhs";
 	bus-width = <4>;
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_1p8v>;
@@ -281,6 +282,8 @@  &sdhi2 {
 	pm-ignore-notify;
 	keep-power-in-suspend;
 	mmc-pwrseq = <&wlan_pwrseq>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	status = "okay";
 	#address-cells = <1>;
 	#size-cells = <0>;