diff mbox series

[5/5] arm64: dts: r8a779a0: WIP disable reset-gpios for AVB

Message ID 20201227130407.10991-6-wsa+renesas@sang-engineering.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series v3u: add support for RAVB | expand

Commit Message

Wolfram Sang Dec. 27, 2020, 1:04 p.m. UTC
Retrieving a GPIO currently fails, so probing the whole driver fails
then. Remove them for now to get a working AVB device for testing.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Wolfram Sang Dec. 28, 2020, 1:56 p.m. UTC | #1
On Sun, Dec 27, 2020 at 02:04:06PM +0100, Wolfram Sang wrote:
> Retrieving a GPIO currently fails, so probing the whole driver fails
> then. Remove them for now to get a working AVB device for testing.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

I just pushed out another version of this branch. There, in the
depending gpio branch, a fix for the GPIO DTS addition has been applied,
so 'reset-gpios' work now as expected. So, this patch has been dropped.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
index f5f27dece6ee..48801f2bdbe5 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
@@ -34,7 +34,7 @@  phy0: ethernet-phy@0 {
 		reg = <0>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+		//reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -49,7 +49,7 @@  phy1: ethernet-phy@1 {
 		reg = <0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
+		//reset-gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -64,7 +64,7 @@  phy2: ethernet-phy@2 {
 		reg = <0>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+		//reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -79,7 +79,7 @@  phy3: ethernet-phy@3{
 		reg = <0>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+		//reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -94,7 +94,7 @@  phy4: ethernet-phy@4 {
 		reg = <0>;
 		interrupt-parent = <&gpio8>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio8 15 GPIO_ACTIVE_LOW>;
+		//reset-gpios = <&gpio8 15 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -109,7 +109,7 @@  phy5: ethernet-phy@5 {
 		reg = <0>;
 		interrupt-parent = <&gpio9>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio9 15 GPIO_ACTIVE_LOW>;
+		//reset-gpios = <&gpio9 15 GPIO_ACTIVE_LOW>;
 	};
 };