diff mbox series

[v3,6/6] dt-bindings: display: bridge: Remove deprecated dw_hdmi.txt

Message ID 20210105060818.24158-7-laurent.pinchart+renesas@ideasonboard.com (mailing list archive)
State Superseded
Delegated to: Kieran Bingham
Headers show
Series dt-bindings: display: Convert DWC HDMI TX bindings to YAML | expand

Commit Message

Laurent Pinchart Jan. 5, 2021, 6:08 a.m. UTC
dw_hdmi.txt has been replaced with synopsys,dw-hdmi.yaml, and all
references to the old file have been converted. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
 .../bindings/display/bridge/dw_hdmi.txt       | 33 -------------------
 1 file changed, 33 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt
diff mbox series


diff --git a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt
deleted file mode 100644
index 33bf981fbe33..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt
+++ /dev/null
@@ -1,33 +0,0 @@ 
-Synopsys DesignWare HDMI TX Encoder
-This document defines device tree properties for the Synopsys DesignWare HDMI
-TX Encoder (DWC HDMI TX). It doesn't constitue a device tree binding
-specification by itself but is meant to be referenced by platform-specific
-device tree bindings.
-When referenced from platform device tree bindings the properties defined in
-this document are defined as follows. The platform device tree bindings are
-responsible for defining whether each property is required or optional.
-- reg: Memory mapped base address and length of the DWC HDMI TX registers.
-- reg-io-width: Width of the registers specified by the reg property. The
-  value is expressed in bytes and must be equal to 1 or 4 if specified. The
-  register width defaults to 1 if the property is not present.
-- interrupts: Reference to the DWC HDMI TX interrupt.
-- clocks: References to all the clocks specified in the clock-names property
-  as specified in Documentation/devicetree/bindings/clock/clock-bindings.txt.
-- clock-names: The DWC HDMI TX uses the following clocks.
-  - "iahb" is the bus clock for either AHB and APB (mandatory).
-  - "isfr" is the internal register configuration clock (mandatory).
-  - "cec" is the HDMI CEC controller main clock (optional).
-- ports: The connectivity of the DWC HDMI TX with the rest of the system is
-  expressed in using ports as specified in the device graph bindings defined
-  in Documentation/devicetree/bindings/graph.txt. The numbering of the ports
-  is platform-specific.