diff mbox series

[v2,03/18] media: i2c: rdacm20: Embedded 'serializer' field

Message ID 20210315131512.133720-4-jacopo+renesas@jmondi.org (mailing list archive)
State Superseded
Delegated to: Kieran Bingham
Headers show
Series media: gmsl: Reliability improvement | expand

Commit Message

Jacopo Mondi March 15, 2021, 1:14 p.m. UTC 
There's no reason to allocate dynamically the 'serializer' field in
the driver structure.

Embed the field and adjust all its users in the driver.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 drivers/media/i2c/rdacm20.c | 38 ++++++++++++++++---------------------
 1 file changed, 16 insertions(+), 22 deletions(-)

Comments

Kieran Bingham March 15, 2021, 3:29 p.m. UTC | #1 
Hi Jacopo,

in $SUBJECT s/Embedded/Embed/

But it's trivial so no worries unless there's another iteration.


On 15/03/2021 13:14, Jacopo Mondi wrote:
> There's no reason to allocate dynamically the 'serializer' field in
> the driver structure.
> 
> Embed the field and adjust all its users in the driver.
> 
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

Still holds ;-)

> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  drivers/media/i2c/rdacm20.c | 38 ++++++++++++++++---------------------
>  1 file changed, 16 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c
> index f7fd5ae955d0..4d9bac87cba8 100644
> --- a/drivers/media/i2c/rdacm20.c
> +++ b/drivers/media/i2c/rdacm20.c
> @@ -312,7 +312,7 @@ static const struct ov10635_reg {
>  
>  struct rdacm20_device {
>  	struct device			*dev;
> -	struct max9271_device		*serializer;
> +	struct max9271_device		serializer;
>  	struct i2c_client		*sensor;
>  	struct v4l2_subdev		sd;
>  	struct media_pad		pad;
> @@ -399,7 +399,7 @@ static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable)
>  {
>  	struct rdacm20_device *dev = sd_to_rdacm20(sd);
>  
> -	return max9271_set_serial_link(dev->serializer, enable);
> +	return max9271_set_serial_link(&dev->serializer, enable);
>  }
>  
>  static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd,
> @@ -456,11 +456,11 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
>  	int ret;
>  
>  	/* Verify communication with the MAX9271: ping to wakeup. */
> -	dev->serializer->client->addr = MAX9271_DEFAULT_ADDR;
> -	i2c_smbus_read_byte(dev->serializer->client);
> +	dev->serializer.client->addr = MAX9271_DEFAULT_ADDR;
> +	i2c_smbus_read_byte(dev->serializer.client);
>  
>  	/* Serial link disabled during config as it needs a valid pixel clock. */
> -	ret = max9271_set_serial_link(dev->serializer, false);
> +	ret = max9271_set_serial_link(&dev->serializer, false);
>  	if (ret)
>  		return ret;
>  
> @@ -468,35 +468,35 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
>  	 *  Ensure that we have a good link configuration before attempting to
>  	 *  identify the device.
>  	 */
> -	max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
> -					       MAX9271_I2CSLVTO_1024US |
> -					       MAX9271_I2CMSTBT_105KBPS);
> +	max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
> +						MAX9271_I2CSLVTO_1024US |
> +						MAX9271_I2CMSTBT_105KBPS);
>  
> -	max9271_configure_gmsl_link(dev->serializer);
> +	max9271_configure_gmsl_link(&dev->serializer);
>  
> -	ret = max9271_verify_id(dev->serializer);
> +	ret = max9271_verify_id(&dev->serializer);
>  	if (ret < 0)
>  		return ret;
>  
> -	ret = max9271_set_address(dev->serializer, dev->addrs[0]);
> +	ret = max9271_set_address(&dev->serializer, dev->addrs[0]);
>  	if (ret < 0)
>  		return ret;
> -	dev->serializer->client->addr = dev->addrs[0];
> +	dev->serializer.client->addr = dev->addrs[0];
>  
>  	/*
>  	 * Reset the sensor by cycling the OV10635 reset signal connected to the
>  	 * MAX9271 GPIO1 and verify communication with the OV10635.
>  	 */
> -	ret = max9271_enable_gpios(dev->serializer, MAX9271_GPIO1OUT);
> +	ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT);
>  	if (ret)
>  		return ret;
>  
> -	ret = max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT);
> +	ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT);
>  	if (ret)
>  		return ret;
>  	usleep_range(10000, 15000);
>  
> -	ret = max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT);
> +	ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT);
>  	if (ret)
>  		return ret;
>  	usleep_range(10000, 15000);
> @@ -560,13 +560,7 @@ static int rdacm20_probe(struct i2c_client *client)
>  	if (!dev)
>  		return -ENOMEM;
>  	dev->dev = &client->dev;
> -
> -	dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer),
> -				       GFP_KERNEL);
> -	if (!dev->serializer)
> -		return -ENOMEM;
> -
> -	dev->serializer->client = client;
> +	dev->serializer.client = client;
>  
>  	ret = of_property_read_u32_array(client->dev.of_node, "reg",
>  					 dev->addrs, 2);
>
diff mbox series

Patch

diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c
index f7fd5ae955d0..4d9bac87cba8 100644
--- a/drivers/media/i2c/rdacm20.c
+++ b/drivers/media/i2c/rdacm20.c
@@ -312,7 +312,7 @@  static const struct ov10635_reg {
 
 struct rdacm20_device {
 	struct device			*dev;
-	struct max9271_device		*serializer;
+	struct max9271_device		serializer;
 	struct i2c_client		*sensor;
 	struct v4l2_subdev		sd;
 	struct media_pad		pad;
@@ -399,7 +399,7 @@  static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable)
 {
 	struct rdacm20_device *dev = sd_to_rdacm20(sd);
 
-	return max9271_set_serial_link(dev->serializer, enable);
+	return max9271_set_serial_link(&dev->serializer, enable);
 }
 
 static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd,
@@ -456,11 +456,11 @@  static int rdacm20_initialize(struct rdacm20_device *dev)
 	int ret;
 
 	/* Verify communication with the MAX9271: ping to wakeup. */
-	dev->serializer->client->addr = MAX9271_DEFAULT_ADDR;
-	i2c_smbus_read_byte(dev->serializer->client);
+	dev->serializer.client->addr = MAX9271_DEFAULT_ADDR;
+	i2c_smbus_read_byte(dev->serializer.client);
 
 	/* Serial link disabled during config as it needs a valid pixel clock. */
-	ret = max9271_set_serial_link(dev->serializer, false);
+	ret = max9271_set_serial_link(&dev->serializer, false);
 	if (ret)
 		return ret;
 
@@ -468,35 +468,35 @@  static int rdacm20_initialize(struct rdacm20_device *dev)
 	 *  Ensure that we have a good link configuration before attempting to
 	 *  identify the device.
 	 */
-	max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
-					       MAX9271_I2CSLVTO_1024US |
-					       MAX9271_I2CMSTBT_105KBPS);
+	max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
+						MAX9271_I2CSLVTO_1024US |
+						MAX9271_I2CMSTBT_105KBPS);
 
-	max9271_configure_gmsl_link(dev->serializer);
+	max9271_configure_gmsl_link(&dev->serializer);
 
-	ret = max9271_verify_id(dev->serializer);
+	ret = max9271_verify_id(&dev->serializer);
 	if (ret < 0)
 		return ret;
 
-	ret = max9271_set_address(dev->serializer, dev->addrs[0]);
+	ret = max9271_set_address(&dev->serializer, dev->addrs[0]);
 	if (ret < 0)
 		return ret;
-	dev->serializer->client->addr = dev->addrs[0];
+	dev->serializer.client->addr = dev->addrs[0];
 
 	/*
 	 * Reset the sensor by cycling the OV10635 reset signal connected to the
 	 * MAX9271 GPIO1 and verify communication with the OV10635.
 	 */
-	ret = max9271_enable_gpios(dev->serializer, MAX9271_GPIO1OUT);
+	ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT);
 	if (ret)
 		return ret;
 
-	ret = max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT);
+	ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT);
 	if (ret)
 		return ret;
 	usleep_range(10000, 15000);
 
-	ret = max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT);
+	ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT);
 	if (ret)
 		return ret;
 	usleep_range(10000, 15000);
@@ -560,13 +560,7 @@  static int rdacm20_probe(struct i2c_client *client)
 	if (!dev)
 		return -ENOMEM;
 	dev->dev = &client->dev;
-
-	dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer),
-				       GFP_KERNEL);
-	if (!dev->serializer)
-		return -ENOMEM;
-
-	dev->serializer->client = client;
+	dev->serializer.client = client;
 
 	ret = of_property_read_u32_array(client->dev.of_node, "reg",
 					 dev->addrs, 2);