diff mbox series

[v4,1/7] dt-bindings: media: max9286: Re-indent example

Message ID 20210415122602.87697-2-jacopo+renesas@jmondi.org (mailing list archive)
State Superseded
Delegated to: Kieran Bingham
Headers show
Series arm64: dts: renesas: Enable GMSL on R8A77970 V3M Eagle | expand

Commit Message

Jacopo Mondi April 15, 2021, 12:25 p.m. UTC
The dt-bindings examples are usually indented with 4 spaces.

The maxim,max9286 schema has the example indented with only
2 spaces, re-indent it.

Cosmetic change only.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 .../bindings/media/i2c/maxim,max9286.yaml     | 214 +++++++++---------
 1 file changed, 107 insertions(+), 107 deletions(-)

Comments

Laurent Pinchart April 15, 2021, 2:42 p.m. UTC | #1
Hi Jacopo,

Thank you for the patch.

On Thu, Apr 15, 2021 at 02:25:56PM +0200, Jacopo Mondi wrote:
> The dt-bindings examples are usually indented with 4 spaces.
> 
> The maxim,max9286 schema has the example indented with only
> 2 spaces, re-indent it.
> 
> Cosmetic change only.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Tested by applying and verifying that `git show -b` shows an empty diff.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  .../bindings/media/i2c/maxim,max9286.yaml     | 214 +++++++++---------
>  1 file changed, 107 insertions(+), 107 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> index ee16102fdfe7..0e7162998b77 100644
> --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> @@ -191,140 +191,140 @@ examples:
>      #include <dt-bindings/gpio/gpio.h>
>  
>      i2c@e66d8000 {
> -      #address-cells = <1>;
> -      #size-cells = <0>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
>  
> -      reg = <0 0xe66d8000>;
> +        reg = <0 0xe66d8000>;
>  
> -      gmsl-deserializer@2c {
> -        compatible = "maxim,max9286";
> -        reg = <0x2c>;
> -        poc-supply = <&camera_poc_12v>;
> -        enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
> +        gmsl-deserializer@2c {
> +            compatible = "maxim,max9286";
> +            reg = <0x2c>;
> +            poc-supply = <&camera_poc_12v>;
> +            enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
>  
> -        gpio-controller;
> -        #gpio-cells = <2>;
> +            gpio-controller;
> +            #gpio-cells = <2>;
>  
> -        maxim,reverse-channel-microvolt = <170000>;
> +            maxim,reverse-channel-microvolt = <170000>;
>  
> -        ports {
> -          #address-cells = <1>;
> -          #size-cells = <0>;
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
>  
> -          port@0 {
> -            reg = <0>;
> +                port@0 {
> +                    reg = <0>;
>  
> -            max9286_in0: endpoint {
> -              remote-endpoint = <&rdacm20_out0>;
> -            };
> -          };
> -
> -          port@1 {
> -            reg = <1>;
> -
> -            max9286_in1: endpoint {
> -              remote-endpoint = <&rdacm20_out1>;
> -            };
> -          };
> -
> -          port@2 {
> -            reg = <2>;
> -
> -            max9286_in2: endpoint {
> -              remote-endpoint = <&rdacm20_out2>;
> -            };
> -          };
> +                    max9286_in0: endpoint {
> +                        remote-endpoint = <&rdacm20_out0>;
> +                    };
> +                };
>  
> -          port@3 {
> -            reg = <3>;
> +                port@1 {
> +                    reg = <1>;
>  
> -            max9286_in3: endpoint {
> -              remote-endpoint = <&rdacm20_out3>;
> -            };
> -          };
> +                    max9286_in1: endpoint {
> +                        remote-endpoint = <&rdacm20_out1>;
> +                    };
> +                };
>  
> -          port@4 {
> -            reg = <4>;
> +                port@2 {
> +                    reg = <2>;
>  
> -            max9286_out: endpoint {
> -              data-lanes = <1 2 3 4>;
> -              remote-endpoint = <&csi40_in>;
> -            };
> -          };
> -        };
> +                    max9286_in2: endpoint {
> +                        remote-endpoint = <&rdacm20_out2>;
> +                    };
> +                };
>  
> -        i2c-mux {
> -          #address-cells = <1>;
> -          #size-cells = <0>;
> +                port@3 {
> +                    reg = <3>;
>  
> -          i2c@0 {
> -            #address-cells = <1>;
> -            #size-cells = <0>;
> -            reg = <0>;
> +                    max9286_in3: endpoint {
> +                        remote-endpoint = <&rdacm20_out3>;
> +                    };
> +                };
>  
> -            camera@51 {
> -              compatible = "imi,rdacm20";
> -              reg = <0x51>, <0x61>;
> +                port@4 {
> +                    reg = <4>;
>  
> -              port {
> -                rdacm20_out0: endpoint {
> -                  remote-endpoint = <&max9286_in0>;
> +                    max9286_out: endpoint {
> +                        data-lanes = <1 2 3 4>;
> +                        remote-endpoint = <&csi40_in>;
> +                    };
>                  };
> -              };
> -
>              };
> -          };
> -
> -          i2c@1 {
> -            #address-cells = <1>;
> -            #size-cells = <0>;
> -            reg = <1>;
>  
> -            camera@52 {
> -              compatible = "imi,rdacm20";
> -              reg = <0x52>, <0x62>;
> +            i2c-mux {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
>  
> -              port {
> -                rdacm20_out1: endpoint {
> -                  remote-endpoint = <&max9286_in1>;
> -                };
> -              };
> -            };
> -          };
> +                i2c@0 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    reg = <0>;
>  
> -          i2c@2 {
> -            #address-cells = <1>;
> -            #size-cells = <0>;
> -            reg = <2>;
> +                    camera@51 {
> +                        compatible = "imi,rdacm20";
> +                        reg = <0x51>, <0x61>;
>  
> -            camera@53 {
> -              compatible = "imi,rdacm20";
> -              reg = <0x53>, <0x63>;
> +                        port {
> +                            rdacm20_out0: endpoint {
> +                                remote-endpoint = <&max9286_in0>;
> +                            };
> +                        };
>  
> -              port {
> -                rdacm20_out2: endpoint {
> -                  remote-endpoint = <&max9286_in2>;
> +                    };
>                  };
> -              };
> -            };
> -          };
>  
> -          i2c@3 {
> -            #address-cells = <1>;
> -            #size-cells = <0>;
> -            reg = <3>;
> +                i2c@1 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    reg = <1>;
> +
> +                    camera@52 {
> +                        compatible = "imi,rdacm20";
> +                        reg = <0x52>, <0x62>;
> +
> +                        port {
> +                            rdacm20_out1: endpoint {
> +                                remote-endpoint = <&max9286_in1>;
> +                            };
> +                        };
> +                    };
> +                };
>  
> -            camera@54 {
> -              compatible = "imi,rdacm20";
> -              reg = <0x54>, <0x64>;
> +                i2c@2 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    reg = <2>;
> +
> +                    camera@53 {
> +                        compatible = "imi,rdacm20";
> +                        reg = <0x53>, <0x63>;
> +
> +                        port {
> +                            rdacm20_out2: endpoint {
> +                                remote-endpoint = <&max9286_in2>;
> +                            };
> +                        };
> +                    };
> +                };
>  
> -              port {
> -                rdacm20_out3: endpoint {
> -                  remote-endpoint = <&max9286_in3>;
> +                i2c@3 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    reg = <3>;
> +
> +                    camera@54 {
> +                        compatible = "imi,rdacm20";
> +                        reg = <0x54>, <0x64>;
> +
> +                        port {
> +                            rdacm20_out3: endpoint {
> +                                remote-endpoint = <&max9286_in3>;
> +                            };
> +                        };
> +                    };
>                  };
> -              };
>              };
> -          };
>          };
> -      };
>      };
Rob Herring April 15, 2021, 4:40 p.m. UTC | #2
On Thu, 15 Apr 2021 14:25:56 +0200, Jacopo Mondi wrote:
> The dt-bindings examples are usually indented with 4 spaces.
> 
> The maxim,max9286 schema has the example indented with only
> 2 spaces, re-indent it.
> 
> Cosmetic change only.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  .../bindings/media/i2c/maxim,max9286.yaml     | 214 +++++++++---------
>  1 file changed, 107 insertions(+), 107 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index ee16102fdfe7..0e7162998b77 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -191,140 +191,140 @@  examples:
     #include <dt-bindings/gpio/gpio.h>
 
     i2c@e66d8000 {
-      #address-cells = <1>;
-      #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-      reg = <0 0xe66d8000>;
+        reg = <0 0xe66d8000>;
 
-      gmsl-deserializer@2c {
-        compatible = "maxim,max9286";
-        reg = <0x2c>;
-        poc-supply = <&camera_poc_12v>;
-        enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+        gmsl-deserializer@2c {
+            compatible = "maxim,max9286";
+            reg = <0x2c>;
+            poc-supply = <&camera_poc_12v>;
+            enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
 
-        gpio-controller;
-        #gpio-cells = <2>;
+            gpio-controller;
+            #gpio-cells = <2>;
 
-        maxim,reverse-channel-microvolt = <170000>;
+            maxim,reverse-channel-microvolt = <170000>;
 
-        ports {
-          #address-cells = <1>;
-          #size-cells = <0>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-          port@0 {
-            reg = <0>;
+                port@0 {
+                    reg = <0>;
 
-            max9286_in0: endpoint {
-              remote-endpoint = <&rdacm20_out0>;
-            };
-          };
-
-          port@1 {
-            reg = <1>;
-
-            max9286_in1: endpoint {
-              remote-endpoint = <&rdacm20_out1>;
-            };
-          };
-
-          port@2 {
-            reg = <2>;
-
-            max9286_in2: endpoint {
-              remote-endpoint = <&rdacm20_out2>;
-            };
-          };
+                    max9286_in0: endpoint {
+                        remote-endpoint = <&rdacm20_out0>;
+                    };
+                };
 
-          port@3 {
-            reg = <3>;
+                port@1 {
+                    reg = <1>;
 
-            max9286_in3: endpoint {
-              remote-endpoint = <&rdacm20_out3>;
-            };
-          };
+                    max9286_in1: endpoint {
+                        remote-endpoint = <&rdacm20_out1>;
+                    };
+                };
 
-          port@4 {
-            reg = <4>;
+                port@2 {
+                    reg = <2>;
 
-            max9286_out: endpoint {
-              data-lanes = <1 2 3 4>;
-              remote-endpoint = <&csi40_in>;
-            };
-          };
-        };
+                    max9286_in2: endpoint {
+                        remote-endpoint = <&rdacm20_out2>;
+                    };
+                };
 
-        i2c-mux {
-          #address-cells = <1>;
-          #size-cells = <0>;
+                port@3 {
+                    reg = <3>;
 
-          i2c@0 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <0>;
+                    max9286_in3: endpoint {
+                        remote-endpoint = <&rdacm20_out3>;
+                    };
+                };
 
-            camera@51 {
-              compatible = "imi,rdacm20";
-              reg = <0x51>, <0x61>;
+                port@4 {
+                    reg = <4>;
 
-              port {
-                rdacm20_out0: endpoint {
-                  remote-endpoint = <&max9286_in0>;
+                    max9286_out: endpoint {
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csi40_in>;
+                    };
                 };
-              };
-
             };
-          };
-
-          i2c@1 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <1>;
 
-            camera@52 {
-              compatible = "imi,rdacm20";
-              reg = <0x52>, <0x62>;
+            i2c-mux {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-              port {
-                rdacm20_out1: endpoint {
-                  remote-endpoint = <&max9286_in1>;
-                };
-              };
-            };
-          };
+                i2c@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
 
-          i2c@2 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <2>;
+                    camera@51 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x51>, <0x61>;
 
-            camera@53 {
-              compatible = "imi,rdacm20";
-              reg = <0x53>, <0x63>;
+                        port {
+                            rdacm20_out0: endpoint {
+                                remote-endpoint = <&max9286_in0>;
+                            };
+                        };
 
-              port {
-                rdacm20_out2: endpoint {
-                  remote-endpoint = <&max9286_in2>;
+                    };
                 };
-              };
-            };
-          };
 
-          i2c@3 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <3>;
+                i2c@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+
+                    camera@52 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x52>, <0x62>;
+
+                        port {
+                            rdacm20_out1: endpoint {
+                                remote-endpoint = <&max9286_in1>;
+                            };
+                        };
+                    };
+                };
 
-            camera@54 {
-              compatible = "imi,rdacm20";
-              reg = <0x54>, <0x64>;
+                i2c@2 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <2>;
+
+                    camera@53 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x53>, <0x63>;
+
+                        port {
+                            rdacm20_out2: endpoint {
+                                remote-endpoint = <&max9286_in2>;
+                            };
+                        };
+                    };
+                };
 
-              port {
-                rdacm20_out3: endpoint {
-                  remote-endpoint = <&max9286_in3>;
+                i2c@3 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <3>;
+
+                    camera@54 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x54>, <0x64>;
+
+                        port {
+                            rdacm20_out3: endpoint {
+                                remote-endpoint = <&max9286_in3>;
+                            };
+                        };
+                    };
                 };
-              };
             };
-          };
         };
-      };
     };