diff mbox series

usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()

Message ID 20210611105411.543008-2-yoshihiro.shimoda.uh@renesas.com (mailing list archive)
State New
Delegated to: Geert Uytterhoeven
Headers show
Series usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop() | expand

Commit Message

Yoshihiro Shimoda June 11, 2021, 10:54 a.m. UTC
This driver has a potential issue which this driver is possible to
cause superfluous irqs after usb_pkt_pop() is called. So, after
the commit 3af32605289e ("usb: renesas_usbhs: fix error return
code of usbhsf_pkt_handler()") had been applied, we could observe
the following error happened when we used g_audio.

    renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22

To fix the issue, disable the tx or rx interrupt in usb_pkt_pop().

Fixes: 2743e7f90dc0 ("usb: renesas_usbhs: fix the usb_pkt_pop()")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 drivers/usb/renesas_usbhs/fifo.c | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series


diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index b5e7991dc7d9..a3c2b01ccf7b 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -101,6 +101,8 @@  static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo,
 #define usbhsf_dma_map(p)	__usbhsf_dma_map_ctrl(p, 1)
 #define usbhsf_dma_unmap(p)	__usbhsf_dma_map_ctrl(p, 0)
 static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map);
+static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
+static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
 struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt)
 	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
@@ -123,6 +125,11 @@  struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt)
 		if (chan) {
+		} else {
+			if (usbhs_pipe_is_dir_in(pipe))
+				usbhsf_rx_irq_ctrl(pipe, 0);
+			else
+				usbhsf_tx_irq_ctrl(pipe, 0);
 		usbhs_pipe_clear_without_sequence(pipe, 0, 0);