diff mbox series

[RFC,2/5] media: i2c: Add MAX9271 I2C driver

Message ID 20210817072703.1167-3-jacopo+renesas@jmondi.org (mailing list archive)
State New
Delegated to: Kieran Bingham
Headers show
Series media: i2c: Add MAX9271 subdevice driver | expand

Commit Message

Jacopo Mondi Aug. 17, 2021, 7:27 a.m. UTC
The MAX9271 is a GMSL serializer that serializes a video stream
received from an image sensor through the parallel video bus.

The serializer it's usually found embedded with an image sensor and
other ancillary chips in camera modules like RDACM20 and RDACM21.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 MAINTAINERS                 |   9 +
 drivers/media/i2c/Kconfig   |  12 +
 drivers/media/i2c/Makefile  |   1 +
 drivers/media/i2c/max9271.c | 756 ++++++++++++++++++++++++++++++++++++
 4 files changed, 778 insertions(+)
 create mode 100644 drivers/media/i2c/max9271.c

Comments

Kieran Bingham Aug. 17, 2021, 3:49 p.m. UTC | #1
Hi Jacopo,

On 17/08/2021 08:27, Jacopo Mondi wrote:
> The MAX9271 is a GMSL serializer that serializes a video stream
> received from an image sensor through the parallel video bus.


https://datasheets.maximintegrated.com/en/ds/MAX9271.pdf calls it a
"16-Bit GMSL Serializer with Coas or STP Cable Drive"


> The serializer it's usually found embedded with an image sensor and

s/it's/is/

> other ancillary chips in camera modules like RDACM20 and RDACM21.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  MAINTAINERS                 |   9 +
>  drivers/media/i2c/Kconfig   |  12 +
>  drivers/media/i2c/Makefile  |   1 +
>  drivers/media/i2c/max9271.c | 756 ++++++++++++++++++++++++++++++++++++
>  4 files changed, 778 insertions(+)
>  create mode 100644 drivers/media/i2c/max9271.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7ad89cac19b7..2dab25a08c9c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11244,6 +11244,15 @@ F:	Documentation/hwmon/max6697.rst
>  F:	drivers/hwmon/max6697.c
>  F:	include/linux/platform_data/max6697.h
>  
> +MAX9271 GMSL SERIALIZER DRIVER
> +M:	Jacopo Mondi <jacopo+renesas@jmondi.org>
> +M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> +M:	Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> +M:	Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> +L:	linux-media@vger.kernel.org
> +S:	Maintained
> +F:	drivers/media/i2c/max9271.c
> +
>  MAX9286 QUAD GMSL DESERIALIZER DRIVER
>  M:	Jacopo Mondi <jacopo+renesas@jmondi.org>
>  M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 08feb3e8c1bf..b793d1f322d9 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -1300,6 +1300,18 @@ source "drivers/media/i2c/m5mols/Kconfig"
>  config VIDEO_MAX9271_LIB
>  	tristate
>  
> +config VIDEO_MAX9271
> +	tristate "MAX9271 GMSL serializer support"
> +	depends on I2C
> +	select V4L2_FWNODE
> +	select VIDEO_V4L2_SUBDEV_API
> +	select MEDIA_CONTROLLER
> +	help
> +	  This driver supports the Maxim MAX9271 GMSL serializer.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called max9271.
> +
>  config VIDEO_RDACM20
>  	tristate "IMI RDACM20 camera support"
>  	depends on I2C
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index 4d879373bd48..37bb51065574 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -130,6 +130,7 @@ obj-$(CONFIG_VIDEO_IMX355)	+= imx355.o
>  obj-$(CONFIG_VIDEO_IMX412)	+= imx412.o
>  obj-$(CONFIG_VIDEO_MAX9286)	+= max9286.o
>  obj-$(CONFIG_VIDEO_MAX9271_LIB)	+= max9271-lib.o
> +obj-$(CONFIG_VIDEO_MAX9271)	+= max9271.o
>  obj-$(CONFIG_VIDEO_RDACM20)	+= rdacm20.o
>  obj-$(CONFIG_VIDEO_RDACM21)	+= rdacm21.o
>  obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
> diff --git a/drivers/media/i2c/max9271.c b/drivers/media/i2c/max9271.c
> new file mode 100644
> index 000000000000..64987cba3d3e
> --- /dev/null
> +++ b/drivers/media/i2c/max9271.c
> @@ -0,0 +1,756 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2017-2021 Jacopo Mondi
> + * Copyright (C) 2017-2020 Kieran Bingham
> + * Copyright (C) 2017-2019 Laurent Pinchart
> + * Copyright (C) 2017-2019 Niklas Söderlund
> + * Copyright (C) 2016 Renesas Electronics Corporation
> + * Copyright (C) 2015 Cogent Embedded, Inc.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/fwnode.h>
> +#include <linux/init.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/property.h>
> +
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-subdev.h>
> +
> +#define MAX9271_DEFAULT_ADDR	0x40
> +
> +/* Register 0x02 */
> +#define MAX9271_SPREAD_SPECT_0		(0 << 5)
> +#define MAX9271_SPREAD_SPECT_05		(1 << 5)
> +#define MAX9271_SPREAD_SPECT_15		(2 << 5)
> +#define MAX9271_SPREAD_SPECT_1		(5 << 5)
> +#define MAX9271_SPREAD_SPECT_2		(3 << 5)
> +#define MAX9271_SPREAD_SPECT_3		(6 << 5)
> +#define MAX9271_SPREAD_SPECT_4		(7 << 5)
> +#define MAX9271_R02_RES			BIT(4)
> +#define MAX9271_PCLK_AUTODETECT		(3 << 2)
> +#define MAX9271_SERIAL_AUTODETECT	(0x03)
> +/* Register 0x04 */
> +#define MAX9271_SEREN			BIT(7)
> +#define MAX9271_CLINKEN			BIT(6)
> +#define MAX9271_PRBSEN			BIT(5)
> +#define MAX9271_SLEEP			BIT(4)
> +#define MAX9271_INTTYPE_I2C		(0 << 2)
> +#define MAX9271_INTTYPE_UART		(1 << 2)
> +#define MAX9271_INTTYPE_NONE		(2 << 2)
> +#define MAX9271_REVCCEN			BIT(1)
> +#define MAX9271_FWDCCEN			BIT(0)
> +/* Register 0x07 */
> +#define MAX9271_DBL			BIT(7)
> +#define MAX9271_DRS			BIT(6)
> +#define MAX9271_BWS			BIT(5)
> +#define MAX9271_ES			BIT(4)
> +#define MAX9271_HVEN			BIT(2)
> +#define MAX9271_EDC_1BIT_PARITY		(0 << 0)
> +#define MAX9271_EDC_6BIT_CRC		(1 << 0)
> +#define MAX9271_EDC_6BIT_HAMMING	(2 << 0)
> +/* Register 0x08 */
> +#define MAX9271_INVVS			BIT(7)
> +#define MAX9271_INVHS			BIT(6)
> +#define MAX9271_REV_LOGAIN		BIT(3)
> +#define MAX9271_REV_HIVTH		BIT(0)
> +/* Register 0x09 */
> +#define MAX9271_ID			0x09
> +/* Register 0x0d */
> +#define MAX9271_I2CLOCACK		BIT(7)
> +#define MAX9271_I2CSLVSH_1046NS_469NS	(3 << 5)
> +#define MAX9271_I2CSLVSH_938NS_352NS	(2 << 5)
> +#define MAX9271_I2CSLVSH_469NS_234NS	(1 << 5)
> +#define MAX9271_I2CSLVSH_352NS_117NS	(0 << 5)
> +#define MAX9271_I2CMSTBT_837KBPS	(7 << 2)
> +#define MAX9271_I2CMSTBT_533KBPS	(6 << 2)
> +#define MAX9271_I2CMSTBT_339KBPS	(5 << 2)
> +#define MAX9271_I2CMSTBT_173KBPS	(4 << 2)
> +#define MAX9271_I2CMSTBT_105KBPS	(3 << 2)
> +#define MAX9271_I2CMSTBT_84KBPS		(2 << 2)
> +#define MAX9271_I2CMSTBT_28KBPS		(1 << 2)
> +#define MAX9271_I2CMSTBT_8KBPS		(0 << 2)
> +#define MAX9271_I2CSLVTO_NONE		(3 << 0)
> +#define MAX9271_I2CSLVTO_1024US		(2 << 0)
> +#define MAX9271_I2CSLVTO_256US		(1 << 0)
> +#define MAX9271_I2CSLVTO_64US		(0 << 0)
> +/* Register 0x0f */
> +#define MAX9271_GPIO5OUT		BIT(5)
> +#define MAX9271_GPIO4OUT		BIT(4)
> +#define MAX9271_GPIO3OUT		BIT(3)
> +#define MAX9271_GPIO2OUT		BIT(2)
> +#define MAX9271_GPIO1OUT		BIT(1)
> +#define MAX9271_GPO			BIT(0)
> +/* Register 0x15 */
> +#define MAX9271_PCLKDET			BIT(0)
> +
> +struct max9271_device {
> +	struct device			*dev;
> +	struct i2c_client		*client;
> +	struct v4l2_subdev		sd;
> +#define MAX9271_SOURCE_PAD	0
> +#define MAX9271_SINK_PAD	1
> +	struct media_pad		pads[2];
> +	struct v4l2_async_notifier	notifier;
> +	struct v4l2_async_subdev	*asd;
> +	struct v4l2_ctrl_handler	ctrls;
> +	struct v4l2_subdev		*sensor;
> +};
> +
> +static inline struct max9271_device *sd_to_max9271(struct v4l2_subdev *sd)
> +{
> +	return container_of(sd, struct max9271_device, sd);
> +}
> +
> +static inline struct max9271_device *i2c_to_max9271(struct i2c_client *client)
> +{
> +	return sd_to_max9271(i2c_get_clientdata(client));
> +}
> +
> +static inline struct max9271_device *notifier_to_max9271(
> +						struct v4l2_async_notifier *nf)
> +{
> +	return container_of(nf, struct max9271_device, notifier);
> +}
> +
> +/* --- MAX9271 hardware operations --- */
> +
> +static int max9271_read(struct max9271_device *dev, u8 reg)
> +{
> +	int ret;
> +
> +	dev_dbg(&dev->client->dev, "%s(0x%02x)\n", __func__, reg);
> +
> +	ret = i2c_smbus_read_byte_data(dev->client, reg);
> +	if (ret < 0)
> +		dev_dbg(&dev->client->dev,
> +			"%s: register 0x%02x read failed (%d)\n",
> +			__func__, reg, ret);
> +
> +	return ret;
> +}
> +
> +static int max9271_write(struct max9271_device *dev, u8 reg, u8 val)
> +{
> +	int ret;
> +
> +	dev_dbg(&dev->client->dev, "%s(0x%02x, 0x%02x)\n", __func__, reg, val);
> +
> +	ret = i2c_smbus_write_byte_data(dev->client, reg, val);
> +	if (ret < 0)
> +		dev_err(&dev->client->dev,
> +			"%s: register 0x%02x write failed (%d)\n",
> +			__func__, reg, ret);
> +
> +	return ret;
> +}
> +
> +/*
> + * max9271_pclk_detect() - Detect valid pixel clock from image sensor
> + *
> + * Wait up to 10ms for a valid pixel clock.
> + *
> + * Returns 0 for success, < 0 for pixel clock not properly detected
> + */
> +static int max9271_pclk_detect(struct max9271_device *dev)
> +{
> +	unsigned int i;
> +	int ret;
> +
> +	for (i = 0; i < 100; i++) {
> +		ret = max9271_read(dev, 0x15);
> +		if (ret < 0)
> +			return ret;
> +
> +		if (ret & MAX9271_PCLKDET)
> +			return 0;
> +
> +		usleep_range(50, 100);
> +	}
> +
> +	dev_err(&dev->client->dev, "Unable to detect valid pixel clock\n");
> +
> +	return -EIO;
> +}
> +
> +static void max9271_wake_up(struct max9271_device *dev)
> +{
> +	/*
> +	 * Use the chip default address as this function has to be called
> +	 * before any other one.
> +	 */
> +	dev->client->addr = MAX9271_DEFAULT_ADDR;
> +	i2c_smbus_read_byte(dev->client);
> +	usleep_range(5000, 8000);
> +}
> +
> +static int max9271_set_serial_link(struct max9271_device *dev, bool enable)
> +{
> +	int ret;
> +	u8 val = MAX9271_REVCCEN | MAX9271_FWDCCEN;
> +
> +	if (enable) {
> +		ret = max9271_pclk_detect(dev);
> +		if (ret)
> +			return ret;
> +
> +		val |= MAX9271_SEREN;
> +	} else {
> +		val |= MAX9271_CLINKEN;
> +	}
> +
> +	/*
> +	 * The serializer temporarily disables the reverse control channel for
> +	 * 350µs after starting/stopping the forward serial link, but the
> +	 * deserializer synchronization time isn't clearly documented.
> +	 *
> +	 * According to the serializer datasheet we should wait 3ms, while
> +	 * according to the deserializer datasheet we should wait 5ms.
> +	 *
> +	 * Short delays here appear to show bit-errors in the writes following.
> +	 * Therefore a conservative delay seems best here.
> +	 */
> +	ret = max9271_write(dev, 0x04, val);
> +	if (ret < 0)
> +		return ret;
> +
> +	usleep_range(5000, 8000);
> +
> +	return 0;
> +}
> +
> +static int max9271_configure_i2c(struct max9271_device *dev, u8 i2c_config)
> +{
> +	int ret;
> +
> +	ret = max9271_write(dev, 0x0d, i2c_config);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* The delay required after an I2C bus configuration change is not

/*
 * The delay ... ?



> +	 * characterized in the serializer manual. Sleep up to 5msec to
> +	 * stay safe.
> +	 */
> +	usleep_range(3500, 5000);
> +
> +	return 0;
> +}
> +
> +static int max9271_set_high_threshold(struct max9271_device *dev, bool enable)
> +{
> +	int ret;
> +
> +	ret = max9271_read(dev, 0x08);
> +	if (ret < 0)
> +		return ret;
> +
> +	/*
> +	 * Enable or disable reverse channel high threshold to increase
> +	 * immunity to power supply noise.
> +	 */
> +	ret = max9271_write(dev, 0x08, enable ? ret | BIT(0) : ret & ~BIT(0));
> +	if (ret < 0)
> +		return ret;
> +
> +	usleep_range(2000, 2500);
> +
> +	return 0;
> +}
> +
> +static int max9271_configure_gmsl_link(struct max9271_device *dev)
> +{
> +	int ret;
> +
> +	/*
> +	 * Configure the GMSL link:
> +	 *
> +	 * - Double input mode, high data rate, 24-bit mode
> +	 * - Latch input data on PCLKIN rising edge
> +	 * - Enable HS/VS encoding
> +	 * - 1-bit parity error detection
> +	 *
> +	 * TODO: Make the GMSL link configuration parametric.
> +	 */
> +	ret = max9271_write(dev, 0x07, MAX9271_DBL | MAX9271_HVEN |
> +			    MAX9271_EDC_1BIT_PARITY);
> +	if (ret < 0)
> +		return ret;
> +
> +	usleep_range(5000, 8000);
> +
> +	/*
> +	 * Adjust spread spectrum to +4% and auto-detect pixel clock
> +	 * and serial link rate.
> +	 */
> +	ret = max9271_write(dev, 0x02,
> +			    MAX9271_SPREAD_SPECT_4 | MAX9271_R02_RES |
> +			    MAX9271_PCLK_AUTODETECT |
> +			    MAX9271_SERIAL_AUTODETECT);
> +	if (ret < 0)
> +		return ret;
> +
> +	usleep_range(5000, 8000);
> +
> +	return 0;
> +}
> +
> +static int max9271_set_gpios(struct max9271_device *dev, u8 gpio_mask)
> +{
> +	int ret;
> +
> +	ret = max9271_read(dev, 0x0f);

What is 0x0f?

Ah - the registers are unnamed...

Seems a shame..


> +	if (ret < 0)
> +		return 0;
> +
> +	ret |= gpio_mask;
> +	ret = max9271_write(dev, 0x0f, ret);
> +	if (ret < 0) {
> +		dev_err(&dev->client->dev, "Failed to set gpio (%d)\n", ret);
> +		return ret;
> +	}
> +
> +	usleep_range(3500, 5000);
> +
> +	return 0;
> +}
> +
> +static int max9271_clear_gpios(struct max9271_device *dev, u8 gpio_mask)
> +{
> +	int ret;
> +
> +	ret = max9271_read(dev, 0x0f);
> +	if (ret < 0)
> +		return 0;
> +
> +	ret &= ~gpio_mask;
> +	ret = max9271_write(dev, 0x0f, ret);
> +	if (ret < 0) {
> +		dev_err(&dev->client->dev, "Failed to clear gpio (%d)\n", ret);
> +		return ret;
> +	}
> +
> +	usleep_range(3500, 5000);
> +
> +	return 0;
> +}
> +
> +static int max9271_enable_gpios(struct max9271_device *dev, u8 gpio_mask)
> +{
> +	int ret;
> +
> +	ret = max9271_read(dev, 0x0e);
> +	if (ret < 0)
> +		return 0;
> +
> +	/* BIT(0) reserved: GPO is always enabled. */
> +	ret |= (gpio_mask & ~BIT(0));
> +	ret = max9271_write(dev, 0x0e, ret);
> +	if (ret < 0) {
> +		dev_err(&dev->client->dev, "Failed to enable gpio (%d)\n", ret);
> +		return ret;
> +	}
> +
> +	usleep_range(3500, 5000);
> +
> +	return 0;
> +}
> +
> +static int max9271_verify_id(struct max9271_device *dev)
> +{
> +	int ret;
> +
> +	ret = max9271_read(dev, 0x1e);
> +	if (ret < 0) {
> +		dev_err(&dev->client->dev, "MAX9271 ID read failed (%d)\n",
> +			ret);
> +		return ret;
> +	}
> +
> +	if (ret != MAX9271_ID) {
> +		dev_err(&dev->client->dev, "MAX9271 ID mismatch (0x%02x)\n",
> +			ret);
> +		return -ENXIO;
> +	}
> +
> +	return 0;
> +}
> +
> +static int max9271_set_address(struct max9271_device *dev, u8 addr)
> +{
> +	int ret;
> +
> +	ret = max9271_write(dev, 0x00, addr << 1);
> +	if (ret < 0) {
> +		dev_err(&dev->client->dev,
> +			"MAX9271 I2C address change failed (%d)\n", ret);
> +		return ret;
> +	}
> +	usleep_range(3500, 5000);
> +
> +	return 0;
> +}
> +
> +/* --- V4L2 Subdev Ops --- */
> +
> +static int max9271_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> +	struct max9271_device *max9271 = sd_to_max9271(sd);
> +
> +	return max9271_set_serial_link(max9271, enable);
> +}
> +
> +static int max9271_enum_mbus_code(struct v4l2_subdev *sd,
> +				  struct v4l2_subdev_state *sd_state,
> +				  struct v4l2_subdev_mbus_code_enum *code)
> +{
> +	struct max9271_device *max9271 = sd_to_max9271(sd);
> +
> +	return v4l2_subdev_call(max9271->sensor, pad, enum_mbus_code, NULL,
> +				code);
> +}
> +
> +static int max9271_get_fmt(struct v4l2_subdev *sd,
> +			   struct v4l2_subdev_state *sd_state,
> +			   struct v4l2_subdev_format *format)
> +{
> +	struct max9271_device *max9271 = sd_to_max9271(sd);
> +
> +	return v4l2_subdev_call(max9271->sensor, pad, get_fmt, NULL,
> +				format);
> +}
> +
> +static int max9271_set_fmt(struct v4l2_subdev *sd,
> +			   struct v4l2_subdev_state *sd_state,
> +			   struct v4l2_subdev_format *format)
> +{
> +	struct max9271_device *max9271 = sd_to_max9271(sd);
> +
> +	return v4l2_subdev_call(max9271->sensor, pad, set_fmt, NULL,
> +				format);
> +}
> +
> +static int max9271_post_register(struct v4l2_subdev *sd)
> +{
> +	struct max9271_device *max9271 = sd_to_max9271(sd);
> +	int ret;
> +
> +	ret = max9271_verify_id(max9271);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = max9271_enable_gpios(max9271, MAX9271_GPIO1OUT);
> +	if (ret)
> +		return ret;
> +
> +	ret = max9271_configure_gmsl_link(max9271);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_video_ops max9271_video_ops = {
> +	.s_stream	= max9271_s_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops max9271_subdev_pad_ops = {
> +	.enum_mbus_code = max9271_enum_mbus_code,
> +	.get_fmt	= max9271_get_fmt,
> +	.set_fmt	= max9271_set_fmt,
> +};
> +
> +static const struct v4l2_subdev_core_ops max9271_core_ops = {
> +	.post_register	= max9271_post_register,
> +};
> +
> +static const struct v4l2_subdev_ops max9271_subdev_ops = {
> +	.core		= &max9271_core_ops,
> +	.video		= &max9271_video_ops,
> +	.pad		= &max9271_subdev_pad_ops,
> +};
> +
> +/* --- V4L2 Async Notifier --- */
> +
> +static int max9271_notify_bound(struct v4l2_async_notifier *notifier,
> +				struct v4l2_subdev *subdev,
> +				struct v4l2_async_subdev *asd)
> +{
> +	struct max9271_device *max9271 = notifier_to_max9271(notifier);
> +	int ret, pad;
> +
> +	/*
> +	 * Reserve more space than necessary for controls inherited by the
> +	 * remote subdev.
> +	 */
> +	ret = v4l2_ctrl_handler_init(&max9271->ctrls, 16);
> +	if (ret < 0) {
> +		dev_err(max9271->dev,
> +			"Unable to initialize control handler: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = v4l2_ctrl_add_handler(&max9271->ctrls, subdev->ctrl_handler,
> +				    NULL, true);
> +	if (ret < 0) {
> +		dev_err(max9271->dev,
> +			"Unable to add subdev control handler: %d\n", ret);
> +		goto error_free_handler;
> +	}
> +	max9271->sd.ctrl_handler = &max9271->ctrls;
> +
> +	/* Create media link with the remote sensor source pad. */
> +	pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
> +					  MEDIA_PAD_FL_SOURCE);
> +	if (pad < 0) {
> +		dev_err(max9271->dev,
> +			"Failed to find source pad for %s\n", subdev->name);
> +		ret = pad;
> +		goto error_free_handler;
> +	}
> +
> +	ret = media_create_pad_link(&subdev->entity, pad,
> +				    &max9271->sd.entity, MAX9271_SINK_PAD,
> +				    MEDIA_LNK_FL_ENABLED |
> +				    MEDIA_LNK_FL_IMMUTABLE);
> +	if (ret)
> +		goto error_free_handler;
> +
> +	max9271->sensor = subdev;
> +
> +	/*
> +	 * Hold OV10635 in reset during max9271 configuration. The reset signal

Hold the sensor in reset ...

But are all sensors guaranteed to be connected to the GPIO in the same way?

Will this cause us issues? - does the GPIO need to be modelled somehow
to determine what's connected to them?



> +	 * has to be asserted for at least 200 microseconds.
> +	 */
> +	ret = max9271_clear_gpios(max9271, MAX9271_GPIO1OUT);
> +	if (ret)
> +		return ret;
> +	usleep_range(200, 500);
> +
> +	/*
> +	 * Release ov10635 from reset and initialize it. The image sensor
> +	 * requires at least 2048 XVCLK cycles (85 micro-seconds at 24MHz)
> +	 * before being available. Stay safe and wait up to 500 micro-seconds.

More sensor specific ... what needs to be abstracted here?


> +	 */
> +	ret = max9271_set_gpios(max9271, MAX9271_GPIO1OUT);
> +	if (ret)
> +		return ret;
> +	usleep_range(100, 500);
> +
> +	/*
> +	 * Call the sensor post_register operation to complete its
> +	 * initialization.
> +	 */
> +	ret = v4l2_subdev_call(max9271->sensor, core, post_register);
> +	if (ret) {
> +		dev_err(max9271->dev, "Failed to initialize sensor %u\n", ret);
> +		goto error_remove_link;
> +	}
> +
> +	return 0;
> +
> +error_remove_link:
> +	media_entity_remove_links(&max9271->sd.entity);
> +	max9271->sensor = NULL;
> +
> +error_free_handler:
> +	v4l2_ctrl_handler_free(&max9271->ctrls);
> +	max9271->sd.ctrl_handler = NULL;
> +
> +	return ret;
> +}
> +
> +static void max9271_notify_unbind(struct v4l2_async_notifier *notifier,
> +				  struct v4l2_subdev *subdev,
> +				  struct v4l2_async_subdev *asd)
> +{
> +	struct max9271_device *max9271 = notifier_to_max9271(notifier);
> +
> +	media_entity_remove_links(&max9271->sd.entity);
> +	max9271->sensor = NULL;
> +}
> +
> +static const struct v4l2_async_notifier_operations max9271_notifier_ops = {
> +	.bound = max9271_notify_bound,
> +	.unbind = max9271_notify_unbind,
> +};
> +
> +static int max9271_parse_dt(struct max9271_device *max9271)
> +{
> +	struct fwnode_handle *ep, *remote;
> +	struct v4l2_fwnode_endpoint vep = {
> +		.bus_type = V4L2_MBUS_PARALLEL,
> +	};
> +	int ret;
> +
> +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(max9271->dev), 1, 0, 0);
> +	if (!ep) {
> +		dev_err(max9271->dev, "Unable to get sensor endpoint: %pOF\n",
> +			max9271->dev->of_node);
> +		return -ENOENT;
> +	}
> +
> +	remote = fwnode_graph_get_remote_endpoint(ep);
> +	if (!remote) {
> +		dev_err(max9271->dev, "Unable to get remote endpoint: %pOF\n",
> +			max9271->dev->of_node);
> +		return -ENOENT;
> +	}
> +
> +	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> +	fwnode_handle_put(ep);
> +	if (ret) {
> +		fwnode_handle_put(remote);
> +		dev_err(max9271->dev, "Unable to parse endpoint: %pOF\n",
> +			to_of_node(ep));
> +		return ret;
> +	}
> +
> +	v4l2_async_notifier_init(&max9271->notifier);
> +	max9271->asd = v4l2_async_notifier_add_fwnode_subdev(&max9271->notifier,
> +					      remote, struct v4l2_async_subdev);
> +	fwnode_handle_put(remote);
> +	if (IS_ERR(max9271->asd))
> +		return PTR_ERR(max9271->asd);
> +
> +	max9271->notifier.ops = &max9271_notifier_ops;
> +	max9271->notifier.flags = V4L2_ASYNC_NOTIFIER_DEFER_POST_REGISTER;

This looks new, I'll have to read up on it ...


> +	ret = v4l2_async_subdev_notifier_register(&max9271->sd,
> +						  &max9271->notifier);
> +	if (ret < 0) {
> +		v4l2_async_notifier_cleanup(&max9271->notifier);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int max9271_init(struct max9271_device *max9271)
> +{
> +	int ret;
> +	u8 addr;
> +
> +	max9271_wake_up(max9271);

This call has just set max9271->client->addr = MAX9271_DEFAULT_ADDR, so
the original has now been lost.


> +
> +	/* Re-program the chip address. */
> +	addr = max9271->client->addr;
> +	max9271->client->addr = MAX9271_DEFAULT_ADDR;
> +	ret = max9271_set_address(max9271, addr);

So this is currently broken :S

> +	if (ret < 0)
> +		return ret;
> +	max9271->client->addr = addr;
> +
> +	/* Serial link disabled during conf as it needs a valid pixel clock. */
> +	ret = max9271_set_serial_link(max9271, false);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 *  Ensure that we have a good link configuration before attempting to
> +	 *  identify the device.
> +	 */
> +	ret = max9271_configure_i2c(max9271, MAX9271_I2CSLVSH_469NS_234NS |
> +					     MAX9271_I2CSLVTO_1024US |
> +					     MAX9271_I2CMSTBT_105KBPS);

Are these parameters tied to the max9286 ?


> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * Set reverse channel high threshold to increase noise immunity.
> +	 *
> +	 * This should be compensated by increasing the reverse channel
> +	 * amplitude on the remote deserializer side.
> +	 */
> +	return max9271_set_high_threshold(max9271, true);
> +}
> +
> +static int max9271_probe(struct i2c_client *client)
> +{
> +	struct max9271_device *max9271;
> +	struct fwnode_handle *ep;
> +	int ret;
> +
> +	max9271 = devm_kzalloc(&client->dev, sizeof(*max9271), GFP_KERNEL);
> +	if (!max9271)
> +		return -ENOMEM;
> +	max9271->dev = &client->dev;
> +	max9271->client = client;
> +
> +	/* Initialize and register the subdevice. */
> +	v4l2_i2c_subdev_init(&max9271->sd, client, &max9271_subdev_ops);
> +	max9271->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	max9271->pads[MAX9271_SOURCE_PAD].flags = MEDIA_PAD_FL_SOURCE;
> +	max9271->pads[MAX9271_SINK_PAD].flags = MEDIA_PAD_FL_SINK;
> +	max9271->sd.entity.flags |= MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;

Is it a formatter - do we need a new/different entity type?


> +	ret = media_entity_pads_init(&max9271->sd.entity, 2, max9271->pads);
> +	if (ret < 0)
> +		return ret;
> +
> +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(max9271->dev), 0, 0, 0);
> +	if (!ep) {
> +		dev_err(max9271->dev, "Unable to get endpoint 0: %pOF\n",
> +			max9271->dev->of_node);
> +		ret = -ENODEV;
> +		goto error_media_entity;
> +	}
> +
> +	max9271->sd.fwnode = ep;
> +	ret = v4l2_async_register_subdev(&max9271->sd);
> +	if (ret)
> +		goto error_put_node;
> +
> +	ret = max9271_parse_dt(max9271);
> +	if (ret)
> +		goto error_unregister_subdev;
> +
> +	ret = max9271_init(max9271);
> +	if (ret)
> +		goto error_unregister_subdev;
> +
> +	return 0;
> +
> +error_unregister_subdev:
> +	v4l2_async_unregister_subdev(&max9271->sd);
> +error_put_node:
> +	fwnode_handle_put(max9271->sd.fwnode);
> +error_media_entity:
> +	media_entity_cleanup(&max9271->sd.entity);
> +
> +	return ret;
> +}
> +
> +static int max9271_remove(struct i2c_client *client)
> +{
> +	struct max9271_device *max9271 = i2c_to_max9271(client);
> +
> +	v4l2_ctrl_handler_free(&max9271->ctrls);
> +	v4l2_async_notifier_cleanup(&max9271->notifier);
> +	v4l2_async_unregister_subdev(&max9271->sd);
> +	fwnode_handle_put(max9271->sd.fwnode);
> +	media_entity_cleanup(&max9271->sd.entity);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id max9271_of_ids[] = {
> +	{ .compatible = "imi,max9271", },

This should be a 'maxim' prefix now, not IMI.


> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, max9271_of_ids);
> +
> +static struct i2c_driver max9271_i2c_driver = {
> +	.driver	= {
> +		.name	= "max9271",
> +		.of_match_table = max9271_of_ids,
> +	},
> +	.probe_new	= max9271_probe,
> +	.remove		= max9271_remove,
> +};
> +
> +module_i2c_driver(max9271_i2c_driver);
> +
> +MODULE_DESCRIPTION("MAX9271 GMSL serializer subdevice driver");
> +MODULE_AUTHOR("Jacopo Mondi");
> +MODULE_LICENSE("GPL");
>
Jacopo Mondi Aug. 18, 2021, 8:27 a.m. UTC | #2
Hi Kieran, thanks for review!

On Tue, Aug 17, 2021 at 04:49:17PM +0100, Kieran Bingham wrote:
> Hi Jacopo,
>
> On 17/08/2021 08:27, Jacopo Mondi wrote:
> > The MAX9271 is a GMSL serializer that serializes a video stream
> > received from an image sensor through the parallel video bus.
>
>
> https://datasheets.maximintegrated.com/en/ds/MAX9271.pdf calls it a
> "16-Bit GMSL Serializer with Coas or STP Cable Drive"
>

Nice we have a public datasheet now!
Nice, well, it might mean GMSL is just old ?

>
> > The serializer it's usually found embedded with an image sensor and
>
> s/it's/is/
>
> > other ancillary chips in camera modules like RDACM20 and RDACM21.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > ---
> >  MAINTAINERS                 |   9 +
> >  drivers/media/i2c/Kconfig   |  12 +
> >  drivers/media/i2c/Makefile  |   1 +
> >  drivers/media/i2c/max9271.c | 756 ++++++++++++++++++++++++++++++++++++
> >  4 files changed, 778 insertions(+)
> >  create mode 100644 drivers/media/i2c/max9271.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 7ad89cac19b7..2dab25a08c9c 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -11244,6 +11244,15 @@ F:	Documentation/hwmon/max6697.rst
> >  F:	drivers/hwmon/max6697.c
> >  F:	include/linux/platform_data/max6697.h
> >
> > +MAX9271 GMSL SERIALIZER DRIVER
> > +M:	Jacopo Mondi <jacopo+renesas@jmondi.org>
> > +M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> > +M:	Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > +M:	Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > +L:	linux-media@vger.kernel.org
> > +S:	Maintained
> > +F:	drivers/media/i2c/max9271.c
> > +
> >  MAX9286 QUAD GMSL DESERIALIZER DRIVER
> >  M:	Jacopo Mondi <jacopo+renesas@jmondi.org>
> >  M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > index 08feb3e8c1bf..b793d1f322d9 100644
> > --- a/drivers/media/i2c/Kconfig
> > +++ b/drivers/media/i2c/Kconfig
> > @@ -1300,6 +1300,18 @@ source "drivers/media/i2c/m5mols/Kconfig"
> >  config VIDEO_MAX9271_LIB
> >  	tristate
> >
> > +config VIDEO_MAX9271
> > +	tristate "MAX9271 GMSL serializer support"
> > +	depends on I2C
> > +	select V4L2_FWNODE
> > +	select VIDEO_V4L2_SUBDEV_API
> > +	select MEDIA_CONTROLLER
> > +	help
> > +	  This driver supports the Maxim MAX9271 GMSL serializer.
> > +
> > +	  To compile this driver as a module, choose M here: the
> > +	  module will be called max9271.
> > +
> >  config VIDEO_RDACM20
> >  	tristate "IMI RDACM20 camera support"
> >  	depends on I2C
> > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > index 4d879373bd48..37bb51065574 100644
> > --- a/drivers/media/i2c/Makefile
> > +++ b/drivers/media/i2c/Makefile
> > @@ -130,6 +130,7 @@ obj-$(CONFIG_VIDEO_IMX355)	+= imx355.o
> >  obj-$(CONFIG_VIDEO_IMX412)	+= imx412.o
> >  obj-$(CONFIG_VIDEO_MAX9286)	+= max9286.o
> >  obj-$(CONFIG_VIDEO_MAX9271_LIB)	+= max9271-lib.o
> > +obj-$(CONFIG_VIDEO_MAX9271)	+= max9271.o
> >  obj-$(CONFIG_VIDEO_RDACM20)	+= rdacm20.o
> >  obj-$(CONFIG_VIDEO_RDACM21)	+= rdacm21.o
> >  obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
> > diff --git a/drivers/media/i2c/max9271.c b/drivers/media/i2c/max9271.c
> > new file mode 100644
> > index 000000000000..64987cba3d3e
> > --- /dev/null
> > +++ b/drivers/media/i2c/max9271.c
> > @@ -0,0 +1,756 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (C) 2017-2021 Jacopo Mondi
> > + * Copyright (C) 2017-2020 Kieran Bingham
> > + * Copyright (C) 2017-2019 Laurent Pinchart
> > + * Copyright (C) 2017-2019 Niklas Söderlund
> > + * Copyright (C) 2016 Renesas Electronics Corporation
> > + * Copyright (C) 2015 Cogent Embedded, Inc.
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/fwnode.h>
> > +#include <linux/init.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/property.h>
> > +
> > +#include <media/v4l2-async.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-fwnode.h>
> > +#include <media/v4l2-subdev.h>
> > +
> > +#define MAX9271_DEFAULT_ADDR	0x40
> > +
> > +/* Register 0x02 */
> > +#define MAX9271_SPREAD_SPECT_0		(0 << 5)
> > +#define MAX9271_SPREAD_SPECT_05		(1 << 5)
> > +#define MAX9271_SPREAD_SPECT_15		(2 << 5)
> > +#define MAX9271_SPREAD_SPECT_1		(5 << 5)
> > +#define MAX9271_SPREAD_SPECT_2		(3 << 5)
> > +#define MAX9271_SPREAD_SPECT_3		(6 << 5)
> > +#define MAX9271_SPREAD_SPECT_4		(7 << 5)
> > +#define MAX9271_R02_RES			BIT(4)
> > +#define MAX9271_PCLK_AUTODETECT		(3 << 2)
> > +#define MAX9271_SERIAL_AUTODETECT	(0x03)
> > +/* Register 0x04 */
> > +#define MAX9271_SEREN			BIT(7)
> > +#define MAX9271_CLINKEN			BIT(6)
> > +#define MAX9271_PRBSEN			BIT(5)
> > +#define MAX9271_SLEEP			BIT(4)
> > +#define MAX9271_INTTYPE_I2C		(0 << 2)
> > +#define MAX9271_INTTYPE_UART		(1 << 2)
> > +#define MAX9271_INTTYPE_NONE		(2 << 2)
> > +#define MAX9271_REVCCEN			BIT(1)
> > +#define MAX9271_FWDCCEN			BIT(0)
> > +/* Register 0x07 */
> > +#define MAX9271_DBL			BIT(7)
> > +#define MAX9271_DRS			BIT(6)
> > +#define MAX9271_BWS			BIT(5)
> > +#define MAX9271_ES			BIT(4)
> > +#define MAX9271_HVEN			BIT(2)
> > +#define MAX9271_EDC_1BIT_PARITY		(0 << 0)
> > +#define MAX9271_EDC_6BIT_CRC		(1 << 0)
> > +#define MAX9271_EDC_6BIT_HAMMING	(2 << 0)
> > +/* Register 0x08 */
> > +#define MAX9271_INVVS			BIT(7)
> > +#define MAX9271_INVHS			BIT(6)
> > +#define MAX9271_REV_LOGAIN		BIT(3)
> > +#define MAX9271_REV_HIVTH		BIT(0)
> > +/* Register 0x09 */
> > +#define MAX9271_ID			0x09
> > +/* Register 0x0d */
> > +#define MAX9271_I2CLOCACK		BIT(7)
> > +#define MAX9271_I2CSLVSH_1046NS_469NS	(3 << 5)
> > +#define MAX9271_I2CSLVSH_938NS_352NS	(2 << 5)
> > +#define MAX9271_I2CSLVSH_469NS_234NS	(1 << 5)
> > +#define MAX9271_I2CSLVSH_352NS_117NS	(0 << 5)
> > +#define MAX9271_I2CMSTBT_837KBPS	(7 << 2)
> > +#define MAX9271_I2CMSTBT_533KBPS	(6 << 2)
> > +#define MAX9271_I2CMSTBT_339KBPS	(5 << 2)
> > +#define MAX9271_I2CMSTBT_173KBPS	(4 << 2)
> > +#define MAX9271_I2CMSTBT_105KBPS	(3 << 2)
> > +#define MAX9271_I2CMSTBT_84KBPS		(2 << 2)
> > +#define MAX9271_I2CMSTBT_28KBPS		(1 << 2)
> > +#define MAX9271_I2CMSTBT_8KBPS		(0 << 2)
> > +#define MAX9271_I2CSLVTO_NONE		(3 << 0)
> > +#define MAX9271_I2CSLVTO_1024US		(2 << 0)
> > +#define MAX9271_I2CSLVTO_256US		(1 << 0)
> > +#define MAX9271_I2CSLVTO_64US		(0 << 0)
> > +/* Register 0x0f */
> > +#define MAX9271_GPIO5OUT		BIT(5)
> > +#define MAX9271_GPIO4OUT		BIT(4)
> > +#define MAX9271_GPIO3OUT		BIT(3)
> > +#define MAX9271_GPIO2OUT		BIT(2)
> > +#define MAX9271_GPIO1OUT		BIT(1)
> > +#define MAX9271_GPO			BIT(0)
> > +/* Register 0x15 */
> > +#define MAX9271_PCLKDET			BIT(0)
> > +
> > +struct max9271_device {
> > +	struct device			*dev;
> > +	struct i2c_client		*client;
> > +	struct v4l2_subdev		sd;
> > +#define MAX9271_SOURCE_PAD	0
> > +#define MAX9271_SINK_PAD	1
> > +	struct media_pad		pads[2];
> > +	struct v4l2_async_notifier	notifier;
> > +	struct v4l2_async_subdev	*asd;
> > +	struct v4l2_ctrl_handler	ctrls;
> > +	struct v4l2_subdev		*sensor;
> > +};
> > +
> > +static inline struct max9271_device *sd_to_max9271(struct v4l2_subdev *sd)
> > +{
> > +	return container_of(sd, struct max9271_device, sd);
> > +}
> > +
> > +static inline struct max9271_device *i2c_to_max9271(struct i2c_client *client)
> > +{
> > +	return sd_to_max9271(i2c_get_clientdata(client));
> > +}
> > +
> > +static inline struct max9271_device *notifier_to_max9271(
> > +						struct v4l2_async_notifier *nf)
> > +{
> > +	return container_of(nf, struct max9271_device, notifier);
> > +}
> > +
> > +/* --- MAX9271 hardware operations --- */
> > +
> > +static int max9271_read(struct max9271_device *dev, u8 reg)
> > +{
> > +	int ret;
> > +
> > +	dev_dbg(&dev->client->dev, "%s(0x%02x)\n", __func__, reg);
> > +
> > +	ret = i2c_smbus_read_byte_data(dev->client, reg);
> > +	if (ret < 0)
> > +		dev_dbg(&dev->client->dev,
> > +			"%s: register 0x%02x read failed (%d)\n",
> > +			__func__, reg, ret);
> > +
> > +	return ret;
> > +}
> > +
> > +static int max9271_write(struct max9271_device *dev, u8 reg, u8 val)
> > +{
> > +	int ret;
> > +
> > +	dev_dbg(&dev->client->dev, "%s(0x%02x, 0x%02x)\n", __func__, reg, val);
> > +
> > +	ret = i2c_smbus_write_byte_data(dev->client, reg, val);
> > +	if (ret < 0)
> > +		dev_err(&dev->client->dev,
> > +			"%s: register 0x%02x write failed (%d)\n",
> > +			__func__, reg, ret);
> > +
> > +	return ret;
> > +}
> > +
> > +/*
> > + * max9271_pclk_detect() - Detect valid pixel clock from image sensor
> > + *
> > + * Wait up to 10ms for a valid pixel clock.
> > + *
> > + * Returns 0 for success, < 0 for pixel clock not properly detected
> > + */
> > +static int max9271_pclk_detect(struct max9271_device *dev)
> > +{
> > +	unsigned int i;
> > +	int ret;
> > +
> > +	for (i = 0; i < 100; i++) {
> > +		ret = max9271_read(dev, 0x15);
> > +		if (ret < 0)
> > +			return ret;
> > +
> > +		if (ret & MAX9271_PCLKDET)
> > +			return 0;
> > +
> > +		usleep_range(50, 100);
> > +	}
> > +
> > +	dev_err(&dev->client->dev, "Unable to detect valid pixel clock\n");
> > +
> > +	return -EIO;
> > +}
> > +
> > +static void max9271_wake_up(struct max9271_device *dev)
> > +{
> > +	/*
> > +	 * Use the chip default address as this function has to be called
> > +	 * before any other one.
> > +	 */
> > +	dev->client->addr = MAX9271_DEFAULT_ADDR;
> > +	i2c_smbus_read_byte(dev->client);
> > +	usleep_range(5000, 8000);
> > +}
> > +
> > +static int max9271_set_serial_link(struct max9271_device *dev, bool enable)
> > +{
> > +	int ret;
> > +	u8 val = MAX9271_REVCCEN | MAX9271_FWDCCEN;
> > +
> > +	if (enable) {
> > +		ret = max9271_pclk_detect(dev);
> > +		if (ret)
> > +			return ret;
> > +
> > +		val |= MAX9271_SEREN;
> > +	} else {
> > +		val |= MAX9271_CLINKEN;
> > +	}
> > +
> > +	/*
> > +	 * The serializer temporarily disables the reverse control channel for
> > +	 * 350µs after starting/stopping the forward serial link, but the
> > +	 * deserializer synchronization time isn't clearly documented.
> > +	 *
> > +	 * According to the serializer datasheet we should wait 3ms, while
> > +	 * according to the deserializer datasheet we should wait 5ms.
> > +	 *
> > +	 * Short delays here appear to show bit-errors in the writes following.
> > +	 * Therefore a conservative delay seems best here.
> > +	 */
> > +	ret = max9271_write(dev, 0x04, val);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	usleep_range(5000, 8000);
> > +
> > +	return 0;
> > +}
> > +
> > +static int max9271_configure_i2c(struct max9271_device *dev, u8 i2c_config)
> > +{
> > +	int ret;
> > +
> > +	ret = max9271_write(dev, 0x0d, i2c_config);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	/* The delay required after an I2C bus configuration change is not
>
> /*
>  * The delay ... ?
>

Ah, ups

>
>
> > +	 * characterized in the serializer manual. Sleep up to 5msec to
> > +	 * stay safe.
> > +	 */
> > +	usleep_range(3500, 5000);
> > +
> > +	return 0;
> > +}
> > +
> > +static int max9271_set_high_threshold(struct max9271_device *dev, bool enable)
> > +{
> > +	int ret;
> > +
> > +	ret = max9271_read(dev, 0x08);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	/*
> > +	 * Enable or disable reverse channel high threshold to increase
> > +	 * immunity to power supply noise.
> > +	 */
> > +	ret = max9271_write(dev, 0x08, enable ? ret | BIT(0) : ret & ~BIT(0));
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	usleep_range(2000, 2500);
> > +
> > +	return 0;
> > +}
> > +
> > +static int max9271_configure_gmsl_link(struct max9271_device *dev)
> > +{
> > +	int ret;
> > +
> > +	/*
> > +	 * Configure the GMSL link:
> > +	 *
> > +	 * - Double input mode, high data rate, 24-bit mode
> > +	 * - Latch input data on PCLKIN rising edge
> > +	 * - Enable HS/VS encoding
> > +	 * - 1-bit parity error detection
> > +	 *
> > +	 * TODO: Make the GMSL link configuration parametric.
> > +	 */
> > +	ret = max9271_write(dev, 0x07, MAX9271_DBL | MAX9271_HVEN |
> > +			    MAX9271_EDC_1BIT_PARITY);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	usleep_range(5000, 8000);
> > +
> > +	/*
> > +	 * Adjust spread spectrum to +4% and auto-detect pixel clock
> > +	 * and serial link rate.
> > +	 */
> > +	ret = max9271_write(dev, 0x02,
> > +			    MAX9271_SPREAD_SPECT_4 | MAX9271_R02_RES |
> > +			    MAX9271_PCLK_AUTODETECT |
> > +			    MAX9271_SERIAL_AUTODETECT);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	usleep_range(5000, 8000);
> > +
> > +	return 0;
> > +}
> > +
> > +static int max9271_set_gpios(struct max9271_device *dev, u8 gpio_mask)
> > +{
> > +	int ret;
> > +
> > +	ret = max9271_read(dev, 0x0f);
>
> What is 0x0f?
>
> Ah - the registers are unnamed...
>
> Seems a shame..

It is a bit. If the overall approach is validated, I'll go and
beautify the driver.

>
>
> > +	if (ret < 0)
> > +		return 0;
> > +
> > +	ret |= gpio_mask;
> > +	ret = max9271_write(dev, 0x0f, ret);
> > +	if (ret < 0) {
> > +		dev_err(&dev->client->dev, "Failed to set gpio (%d)\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	usleep_range(3500, 5000);
> > +
> > +	return 0;
> > +}
> > +
> > +static int max9271_clear_gpios(struct max9271_device *dev, u8 gpio_mask)
> > +{
> > +	int ret;
> > +
> > +	ret = max9271_read(dev, 0x0f);
> > +	if (ret < 0)
> > +		return 0;
> > +
> > +	ret &= ~gpio_mask;
> > +	ret = max9271_write(dev, 0x0f, ret);
> > +	if (ret < 0) {
> > +		dev_err(&dev->client->dev, "Failed to clear gpio (%d)\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	usleep_range(3500, 5000);
> > +
> > +	return 0;
> > +}
> > +
> > +static int max9271_enable_gpios(struct max9271_device *dev, u8 gpio_mask)
> > +{
> > +	int ret;
> > +
> > +	ret = max9271_read(dev, 0x0e);
> > +	if (ret < 0)
> > +		return 0;
> > +
> > +	/* BIT(0) reserved: GPO is always enabled. */
> > +	ret |= (gpio_mask & ~BIT(0));
> > +	ret = max9271_write(dev, 0x0e, ret);
> > +	if (ret < 0) {
> > +		dev_err(&dev->client->dev, "Failed to enable gpio (%d)\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	usleep_range(3500, 5000);
> > +
> > +	return 0;
> > +}
> > +
> > +static int max9271_verify_id(struct max9271_device *dev)
> > +{
> > +	int ret;
> > +
> > +	ret = max9271_read(dev, 0x1e);
> > +	if (ret < 0) {
> > +		dev_err(&dev->client->dev, "MAX9271 ID read failed (%d)\n",
> > +			ret);
> > +		return ret;
> > +	}
> > +
> > +	if (ret != MAX9271_ID) {
> > +		dev_err(&dev->client->dev, "MAX9271 ID mismatch (0x%02x)\n",
> > +			ret);
> > +		return -ENXIO;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int max9271_set_address(struct max9271_device *dev, u8 addr)
> > +{
> > +	int ret;
> > +
> > +	ret = max9271_write(dev, 0x00, addr << 1);
> > +	if (ret < 0) {
> > +		dev_err(&dev->client->dev,
> > +			"MAX9271 I2C address change failed (%d)\n", ret);
> > +		return ret;
> > +	}
> > +	usleep_range(3500, 5000);
> > +
> > +	return 0;
> > +}
> > +
> > +/* --- V4L2 Subdev Ops --- */
> > +
> > +static int max9271_s_stream(struct v4l2_subdev *sd, int enable)
> > +{
> > +	struct max9271_device *max9271 = sd_to_max9271(sd);
> > +
> > +	return max9271_set_serial_link(max9271, enable);
> > +}
> > +
> > +static int max9271_enum_mbus_code(struct v4l2_subdev *sd,
> > +				  struct v4l2_subdev_state *sd_state,
> > +				  struct v4l2_subdev_mbus_code_enum *code)
> > +{
> > +	struct max9271_device *max9271 = sd_to_max9271(sd);
> > +
> > +	return v4l2_subdev_call(max9271->sensor, pad, enum_mbus_code, NULL,
> > +				code);
> > +}
> > +
> > +static int max9271_get_fmt(struct v4l2_subdev *sd,
> > +			   struct v4l2_subdev_state *sd_state,
> > +			   struct v4l2_subdev_format *format)
> > +{
> > +	struct max9271_device *max9271 = sd_to_max9271(sd);
> > +
> > +	return v4l2_subdev_call(max9271->sensor, pad, get_fmt, NULL,
> > +				format);
> > +}
> > +
> > +static int max9271_set_fmt(struct v4l2_subdev *sd,
> > +			   struct v4l2_subdev_state *sd_state,
> > +			   struct v4l2_subdev_format *format)
> > +{
> > +	struct max9271_device *max9271 = sd_to_max9271(sd);
> > +
> > +	return v4l2_subdev_call(max9271->sensor, pad, set_fmt, NULL,
> > +				format);
> > +}
> > +
> > +static int max9271_post_register(struct v4l2_subdev *sd)
> > +{
> > +	struct max9271_device *max9271 = sd_to_max9271(sd);
> > +	int ret;
> > +
> > +	ret = max9271_verify_id(max9271);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = max9271_enable_gpios(max9271, MAX9271_GPIO1OUT);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = max9271_configure_gmsl_link(max9271);
> > +	if (ret)
> > +		return ret;
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct v4l2_subdev_video_ops max9271_video_ops = {
> > +	.s_stream	= max9271_s_stream,
> > +};
> > +
> > +static const struct v4l2_subdev_pad_ops max9271_subdev_pad_ops = {
> > +	.enum_mbus_code = max9271_enum_mbus_code,
> > +	.get_fmt	= max9271_get_fmt,
> > +	.set_fmt	= max9271_set_fmt,
> > +};
> > +
> > +static const struct v4l2_subdev_core_ops max9271_core_ops = {
> > +	.post_register	= max9271_post_register,
> > +};
> > +
> > +static const struct v4l2_subdev_ops max9271_subdev_ops = {
> > +	.core		= &max9271_core_ops,
> > +	.video		= &max9271_video_ops,
> > +	.pad		= &max9271_subdev_pad_ops,
> > +};
> > +
> > +/* --- V4L2 Async Notifier --- */
> > +
> > +static int max9271_notify_bound(struct v4l2_async_notifier *notifier,
> > +				struct v4l2_subdev *subdev,
> > +				struct v4l2_async_subdev *asd)
> > +{
> > +	struct max9271_device *max9271 = notifier_to_max9271(notifier);
> > +	int ret, pad;
> > +
> > +	/*
> > +	 * Reserve more space than necessary for controls inherited by the
> > +	 * remote subdev.
> > +	 */
> > +	ret = v4l2_ctrl_handler_init(&max9271->ctrls, 16);
> > +	if (ret < 0) {
> > +		dev_err(max9271->dev,
> > +			"Unable to initialize control handler: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	ret = v4l2_ctrl_add_handler(&max9271->ctrls, subdev->ctrl_handler,
> > +				    NULL, true);
> > +	if (ret < 0) {
> > +		dev_err(max9271->dev,
> > +			"Unable to add subdev control handler: %d\n", ret);
> > +		goto error_free_handler;
> > +	}
> > +	max9271->sd.ctrl_handler = &max9271->ctrls;
> > +
> > +	/* Create media link with the remote sensor source pad. */
> > +	pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
> > +					  MEDIA_PAD_FL_SOURCE);
> > +	if (pad < 0) {
> > +		dev_err(max9271->dev,
> > +			"Failed to find source pad for %s\n", subdev->name);
> > +		ret = pad;
> > +		goto error_free_handler;
> > +	}
> > +
> > +	ret = media_create_pad_link(&subdev->entity, pad,
> > +				    &max9271->sd.entity, MAX9271_SINK_PAD,
> > +				    MEDIA_LNK_FL_ENABLED |
> > +				    MEDIA_LNK_FL_IMMUTABLE);
> > +	if (ret)
> > +		goto error_free_handler;
> > +
> > +	max9271->sensor = subdev;
> > +
> > +	/*
> > +	 * Hold OV10635 in reset during max9271 configuration. The reset signal
>
> Hold the sensor in reset ...
>
> But are all sensors guaranteed to be connected to the GPIO in the same way?
>
> Will this cause us issues? - does the GPIO need to be modelled somehow
> to determine what's connected to them?
>
>
>
> > +	 * has to be asserted for at least 200 microseconds.
> > +	 */
> > +	ret = max9271_clear_gpios(max9271, MAX9271_GPIO1OUT);
> > +	if (ret)
> > +		return ret;
> > +	usleep_range(200, 500);
> > +
> > +	/*
> > +	 * Release ov10635 from reset and initialize it. The image sensor
> > +	 * requires at least 2048 XVCLK cycles (85 micro-seconds at 24MHz)
> > +	 * before being available. Stay safe and wait up to 500 micro-seconds.
>
> More sensor specific ... what needs to be abstracted here?

Yes indeed. As pointed out in the cover letter the handling of the
sensor's reset line should go through the gpiod API, and will probably
require installing a gpiochip in the max9271 driver.

>
>
> > +	 */
> > +	ret = max9271_set_gpios(max9271, MAX9271_GPIO1OUT);
> > +	if (ret)
> > +		return ret;
> > +	usleep_range(100, 500);
> > +
> > +	/*
> > +	 * Call the sensor post_register operation to complete its
> > +	 * initialization.
> > +	 */
> > +	ret = v4l2_subdev_call(max9271->sensor, core, post_register);
> > +	if (ret) {
> > +		dev_err(max9271->dev, "Failed to initialize sensor %u\n", ret);
> > +		goto error_remove_link;
> > +	}
> > +
> > +	return 0;
> > +
> > +error_remove_link:
> > +	media_entity_remove_links(&max9271->sd.entity);
> > +	max9271->sensor = NULL;
> > +
> > +error_free_handler:
> > +	v4l2_ctrl_handler_free(&max9271->ctrls);
> > +	max9271->sd.ctrl_handler = NULL;
> > +
> > +	return ret;
> > +}
> > +
> > +static void max9271_notify_unbind(struct v4l2_async_notifier *notifier,
> > +				  struct v4l2_subdev *subdev,
> > +				  struct v4l2_async_subdev *asd)
> > +{
> > +	struct max9271_device *max9271 = notifier_to_max9271(notifier);
> > +
> > +	media_entity_remove_links(&max9271->sd.entity);
> > +	max9271->sensor = NULL;
> > +}
> > +
> > +static const struct v4l2_async_notifier_operations max9271_notifier_ops = {
> > +	.bound = max9271_notify_bound,
> > +	.unbind = max9271_notify_unbind,
> > +};
> > +
> > +static int max9271_parse_dt(struct max9271_device *max9271)
> > +{
> > +	struct fwnode_handle *ep, *remote;
> > +	struct v4l2_fwnode_endpoint vep = {
> > +		.bus_type = V4L2_MBUS_PARALLEL,
> > +	};
> > +	int ret;
> > +
> > +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(max9271->dev), 1, 0, 0);
> > +	if (!ep) {
> > +		dev_err(max9271->dev, "Unable to get sensor endpoint: %pOF\n",
> > +			max9271->dev->of_node);
> > +		return -ENOENT;
> > +	}
> > +
> > +	remote = fwnode_graph_get_remote_endpoint(ep);
> > +	if (!remote) {
> > +		dev_err(max9271->dev, "Unable to get remote endpoint: %pOF\n",
> > +			max9271->dev->of_node);
> > +		return -ENOENT;
> > +	}
> > +
> > +	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> > +	fwnode_handle_put(ep);
> > +	if (ret) {
> > +		fwnode_handle_put(remote);
> > +		dev_err(max9271->dev, "Unable to parse endpoint: %pOF\n",
> > +			to_of_node(ep));
> > +		return ret;
> > +	}
> > +
> > +	v4l2_async_notifier_init(&max9271->notifier);
> > +	max9271->asd = v4l2_async_notifier_add_fwnode_subdev(&max9271->notifier,
> > +					      remote, struct v4l2_async_subdev);
> > +	fwnode_handle_put(remote);
> > +	if (IS_ERR(max9271->asd))
> > +		return PTR_ERR(max9271->asd);
> > +
> > +	max9271->notifier.ops = &max9271_notifier_ops;
> > +	max9271->notifier.flags = V4L2_ASYNC_NOTIFIER_DEFER_POST_REGISTER;
>
> This looks new, I'll have to read up on it ...

It is. I am pushing to get feedback on this since a few months now.
If you wish to help:
https://patchwork.linuxtv.org/project/linux-media/list/?series=5847

>
>
> > +	ret = v4l2_async_subdev_notifier_register(&max9271->sd,
> > +						  &max9271->notifier);
> > +	if (ret < 0) {
> > +		v4l2_async_notifier_cleanup(&max9271->notifier);
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int max9271_init(struct max9271_device *max9271)
> > +{
> > +	int ret;
> > +	u8 addr;
> > +
> > +	max9271_wake_up(max9271);
>
> This call has just set max9271->client->addr = MAX9271_DEFAULT_ADDR, so
> the original has now been lost.

Doh! I overlooked the fact max9271_wake_up() silently overwrites the
i2c client address. For the reasons explained in the cover letter I've
been able to test this patch with a single camera only, so the issue
went unnoticed here. Thanks for spotting!

>
>
> > +
> > +	/* Re-program the chip address. */
> > +	addr = max9271->client->addr;
> > +	max9271->client->addr = MAX9271_DEFAULT_ADDR;
> > +	ret = max9271_set_address(max9271, addr);
>
> So this is currently broken :S
>
> > +	if (ret < 0)
> > +		return ret;
> > +	max9271->client->addr = addr;
> > +
> > +	/* Serial link disabled during conf as it needs a valid pixel clock. */
> > +	ret = max9271_set_serial_link(max9271, false);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/*
> > +	 *  Ensure that we have a good link configuration before attempting to
> > +	 *  identify the device.
> > +	 */
> > +	ret = max9271_configure_i2c(max9271, MAX9271_I2CSLVSH_469NS_234NS |
> > +					     MAX9271_I2CSLVTO_1024US |
> > +					     MAX9271_I2CMSTBT_105KBPS);
>
> Are these parameters tied to the max9286 ?
>

More to the I2c bus configuration and should probably be made
configurable through the canonical i2c DTS properties.

>
> > +	if (ret)
> > +		return ret;
> > +
> > +	/*
> > +	 * Set reverse channel high threshold to increase noise immunity.
> > +	 *
> > +	 * This should be compensated by increasing the reverse channel
> > +	 * amplitude on the remote deserializer side.
> > +	 */
> > +	return max9271_set_high_threshold(max9271, true);
> > +}
> > +
> > +static int max9271_probe(struct i2c_client *client)
> > +{
> > +	struct max9271_device *max9271;
> > +	struct fwnode_handle *ep;
> > +	int ret;
> > +
> > +	max9271 = devm_kzalloc(&client->dev, sizeof(*max9271), GFP_KERNEL);
> > +	if (!max9271)
> > +		return -ENOMEM;
> > +	max9271->dev = &client->dev;
> > +	max9271->client = client;
> > +
> > +	/* Initialize and register the subdevice. */
> > +	v4l2_i2c_subdev_init(&max9271->sd, client, &max9271_subdev_ops);
> > +	max9271->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > +	max9271->pads[MAX9271_SOURCE_PAD].flags = MEDIA_PAD_FL_SOURCE;
> > +	max9271->pads[MAX9271_SINK_PAD].flags = MEDIA_PAD_FL_SINK;
> > +	max9271->sd.entity.flags |= MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
>
> Is it a formatter - do we need a new/different entity type?

I admit I had an hard time choosing the correct entity type :)

>
>
> > +	ret = media_entity_pads_init(&max9271->sd.entity, 2, max9271->pads);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(max9271->dev), 0, 0, 0);
> > +	if (!ep) {
> > +		dev_err(max9271->dev, "Unable to get endpoint 0: %pOF\n",
> > +			max9271->dev->of_node);
> > +		ret = -ENODEV;
> > +		goto error_media_entity;
> > +	}
> > +
> > +	max9271->sd.fwnode = ep;
> > +	ret = v4l2_async_register_subdev(&max9271->sd);
> > +	if (ret)
> > +		goto error_put_node;
> > +
> > +	ret = max9271_parse_dt(max9271);
> > +	if (ret)
> > +		goto error_unregister_subdev;
> > +
> > +	ret = max9271_init(max9271);
> > +	if (ret)
> > +		goto error_unregister_subdev;
> > +
> > +	return 0;
> > +
> > +error_unregister_subdev:
> > +	v4l2_async_unregister_subdev(&max9271->sd);
> > +error_put_node:
> > +	fwnode_handle_put(max9271->sd.fwnode);
> > +error_media_entity:
> > +	media_entity_cleanup(&max9271->sd.entity);
> > +
> > +	return ret;
> > +}
> > +
> > +static int max9271_remove(struct i2c_client *client)
> > +{
> > +	struct max9271_device *max9271 = i2c_to_max9271(client);
> > +
> > +	v4l2_ctrl_handler_free(&max9271->ctrls);
> > +	v4l2_async_notifier_cleanup(&max9271->notifier);
> > +	v4l2_async_unregister_subdev(&max9271->sd);
> > +	fwnode_handle_put(max9271->sd.fwnode);
> > +	media_entity_cleanup(&max9271->sd.entity);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id max9271_of_ids[] = {
> > +	{ .compatible = "imi,max9271", },
>
> This should be a 'maxim' prefix now, not IMI.
>

Indeed!

Thanks
  j

>
> > +	{ }
> > +};
> > +MODULE_DEVICE_TABLE(of, max9271_of_ids);
> > +
> > +static struct i2c_driver max9271_i2c_driver = {
> > +	.driver	= {
> > +		.name	= "max9271",
> > +		.of_match_table = max9271_of_ids,
> > +	},
> > +	.probe_new	= max9271_probe,
> > +	.remove		= max9271_remove,
> > +};
> > +
> > +module_i2c_driver(max9271_i2c_driver);
> > +
> > +MODULE_DESCRIPTION("MAX9271 GMSL serializer subdevice driver");
> > +MODULE_AUTHOR("Jacopo Mondi");
> > +MODULE_LICENSE("GPL");
> >
Kieran Bingham Aug. 18, 2021, 12:38 p.m. UTC | #3
On 18/08/2021 09:27, Jacopo Mondi wrote:
> Hi Kieran, thanks for review!
> 
> On Tue, Aug 17, 2021 at 04:49:17PM +0100, Kieran Bingham wrote:
>> Hi Jacopo,
>>
>> On 17/08/2021 08:27, Jacopo Mondi wrote:
>>> The MAX9271 is a GMSL serializer that serializes a video stream
>>> received from an image sensor through the parallel video bus.
>>
>>
>> https://datasheets.maximintegrated.com/en/ds/MAX9271.pdf calls it a
>> "16-Bit GMSL Serializer with Coas or STP Cable Drive"
>>
> 
> Nice we have a public datasheet now!
> Nice, well, it might mean GMSL is just old ?

Hahah maybe.

>>> The serializer it's usually found embedded with an image sensor and
>>
>> s/it's/is/
>>
>>> other ancillary chips in camera modules like RDACM20 and RDACM21.
>>>
>>> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
>>> ---
>>>  MAINTAINERS                 |   9 +
>>>  drivers/media/i2c/Kconfig   |  12 +
>>>  drivers/media/i2c/Makefile  |   1 +
>>>  drivers/media/i2c/max9271.c | 756 ++++++++++++++++++++++++++++++++++++
>>>  4 files changed, 778 insertions(+)
>>>  create mode 100644 drivers/media/i2c/max9271.c
>>>
>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>> index 7ad89cac19b7..2dab25a08c9c 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -11244,6 +11244,15 @@ F:	Documentation/hwmon/max6697.rst
>>>  F:	drivers/hwmon/max6697.c
>>>  F:	include/linux/platform_data/max6697.h
>>>
>>> +MAX9271 GMSL SERIALIZER DRIVER
>>> +M:	Jacopo Mondi <jacopo+renesas@jmondi.org>
>>> +M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>>> +M:	Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
>>> +M:	Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
>>> +L:	linux-media@vger.kernel.org
>>> +S:	Maintained
>>> +F:	drivers/media/i2c/max9271.c
>>> +
>>>  MAX9286 QUAD GMSL DESERIALIZER DRIVER
>>>  M:	Jacopo Mondi <jacopo+renesas@jmondi.org>
>>>  M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>>> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
>>> index 08feb3e8c1bf..b793d1f322d9 100644
>>> --- a/drivers/media/i2c/Kconfig
>>> +++ b/drivers/media/i2c/Kconfig
>>> @@ -1300,6 +1300,18 @@ source "drivers/media/i2c/m5mols/Kconfig"
>>>  config VIDEO_MAX9271_LIB
>>>  	tristate
>>>
>>> +config VIDEO_MAX9271
>>> +	tristate "MAX9271 GMSL serializer support"
>>> +	depends on I2C
>>> +	select V4L2_FWNODE
>>> +	select VIDEO_V4L2_SUBDEV_API
>>> +	select MEDIA_CONTROLLER
>>> +	help
>>> +	  This driver supports the Maxim MAX9271 GMSL serializer.
>>> +
>>> +	  To compile this driver as a module, choose M here: the
>>> +	  module will be called max9271.
>>> +
>>>  config VIDEO_RDACM20
>>>  	tristate "IMI RDACM20 camera support"
>>>  	depends on I2C
>>> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
>>> index 4d879373bd48..37bb51065574 100644
>>> --- a/drivers/media/i2c/Makefile
>>> +++ b/drivers/media/i2c/Makefile
>>> @@ -130,6 +130,7 @@ obj-$(CONFIG_VIDEO_IMX355)	+= imx355.o
>>>  obj-$(CONFIG_VIDEO_IMX412)	+= imx412.o
>>>  obj-$(CONFIG_VIDEO_MAX9286)	+= max9286.o
>>>  obj-$(CONFIG_VIDEO_MAX9271_LIB)	+= max9271-lib.o
>>> +obj-$(CONFIG_VIDEO_MAX9271)	+= max9271.o
>>>  obj-$(CONFIG_VIDEO_RDACM20)	+= rdacm20.o
>>>  obj-$(CONFIG_VIDEO_RDACM21)	+= rdacm21.o
>>>  obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
>>> diff --git a/drivers/media/i2c/max9271.c b/drivers/media/i2c/max9271.c
>>> new file mode 100644
>>> index 000000000000..64987cba3d3e
>>> --- /dev/null
>>> +++ b/drivers/media/i2c/max9271.c
>>> @@ -0,0 +1,756 @@
>>> +// SPDX-License-Identifier: GPL-2.0+
>>> +/*
>>> + * Copyright (C) 2017-2021 Jacopo Mondi
>>> + * Copyright (C) 2017-2020 Kieran Bingham
>>> + * Copyright (C) 2017-2019 Laurent Pinchart
>>> + * Copyright (C) 2017-2019 Niklas Söderlund
>>> + * Copyright (C) 2016 Renesas Electronics Corporation
>>> + * Copyright (C) 2015 Cogent Embedded, Inc.
>>> + */
>>> +
>>> +#include <linux/delay.h>
>>> +#include <linux/fwnode.h>
>>> +#include <linux/init.h>
>>> +#include <linux/i2c.h>
>>> +#include <linux/module.h>
>>> +#include <linux/property.h>
>>> +
>>> +#include <media/v4l2-async.h>
>>> +#include <media/v4l2-ctrls.h>
>>> +#include <media/v4l2-fwnode.h>
>>> +#include <media/v4l2-subdev.h>
>>> +
>>> +#define MAX9271_DEFAULT_ADDR	0x40
>>> +
>>> +/* Register 0x02 */
>>> +#define MAX9271_SPREAD_SPECT_0		(0 << 5)
>>> +#define MAX9271_SPREAD_SPECT_05		(1 << 5)
>>> +#define MAX9271_SPREAD_SPECT_15		(2 << 5)
>>> +#define MAX9271_SPREAD_SPECT_1		(5 << 5)
>>> +#define MAX9271_SPREAD_SPECT_2		(3 << 5)
>>> +#define MAX9271_SPREAD_SPECT_3		(6 << 5)
>>> +#define MAX9271_SPREAD_SPECT_4		(7 << 5)
>>> +#define MAX9271_R02_RES			BIT(4)
>>> +#define MAX9271_PCLK_AUTODETECT		(3 << 2)
>>> +#define MAX9271_SERIAL_AUTODETECT	(0x03)
>>> +/* Register 0x04 */
>>> +#define MAX9271_SEREN			BIT(7)
>>> +#define MAX9271_CLINKEN			BIT(6)
>>> +#define MAX9271_PRBSEN			BIT(5)
>>> +#define MAX9271_SLEEP			BIT(4)
>>> +#define MAX9271_INTTYPE_I2C		(0 << 2)
>>> +#define MAX9271_INTTYPE_UART		(1 << 2)
>>> +#define MAX9271_INTTYPE_NONE		(2 << 2)
>>> +#define MAX9271_REVCCEN			BIT(1)
>>> +#define MAX9271_FWDCCEN			BIT(0)
>>> +/* Register 0x07 */
>>> +#define MAX9271_DBL			BIT(7)
>>> +#define MAX9271_DRS			BIT(6)
>>> +#define MAX9271_BWS			BIT(5)
>>> +#define MAX9271_ES			BIT(4)
>>> +#define MAX9271_HVEN			BIT(2)
>>> +#define MAX9271_EDC_1BIT_PARITY		(0 << 0)
>>> +#define MAX9271_EDC_6BIT_CRC		(1 << 0)
>>> +#define MAX9271_EDC_6BIT_HAMMING	(2 << 0)
>>> +/* Register 0x08 */
>>> +#define MAX9271_INVVS			BIT(7)
>>> +#define MAX9271_INVHS			BIT(6)
>>> +#define MAX9271_REV_LOGAIN		BIT(3)
>>> +#define MAX9271_REV_HIVTH		BIT(0)
>>> +/* Register 0x09 */
>>> +#define MAX9271_ID			0x09
>>> +/* Register 0x0d */
>>> +#define MAX9271_I2CLOCACK		BIT(7)
>>> +#define MAX9271_I2CSLVSH_1046NS_469NS	(3 << 5)
>>> +#define MAX9271_I2CSLVSH_938NS_352NS	(2 << 5)
>>> +#define MAX9271_I2CSLVSH_469NS_234NS	(1 << 5)
>>> +#define MAX9271_I2CSLVSH_352NS_117NS	(0 << 5)
>>> +#define MAX9271_I2CMSTBT_837KBPS	(7 << 2)
>>> +#define MAX9271_I2CMSTBT_533KBPS	(6 << 2)
>>> +#define MAX9271_I2CMSTBT_339KBPS	(5 << 2)
>>> +#define MAX9271_I2CMSTBT_173KBPS	(4 << 2)
>>> +#define MAX9271_I2CMSTBT_105KBPS	(3 << 2)
>>> +#define MAX9271_I2CMSTBT_84KBPS		(2 << 2)
>>> +#define MAX9271_I2CMSTBT_28KBPS		(1 << 2)
>>> +#define MAX9271_I2CMSTBT_8KBPS		(0 << 2)
>>> +#define MAX9271_I2CSLVTO_NONE		(3 << 0)
>>> +#define MAX9271_I2CSLVTO_1024US		(2 << 0)
>>> +#define MAX9271_I2CSLVTO_256US		(1 << 0)
>>> +#define MAX9271_I2CSLVTO_64US		(0 << 0)
>>> +/* Register 0x0f */
>>> +#define MAX9271_GPIO5OUT		BIT(5)
>>> +#define MAX9271_GPIO4OUT		BIT(4)
>>> +#define MAX9271_GPIO3OUT		BIT(3)
>>> +#define MAX9271_GPIO2OUT		BIT(2)
>>> +#define MAX9271_GPIO1OUT		BIT(1)
>>> +#define MAX9271_GPO			BIT(0)
>>> +/* Register 0x15 */
>>> +#define MAX9271_PCLKDET			BIT(0)
>>> +
>>> +struct max9271_device {
>>> +	struct device			*dev;
>>> +	struct i2c_client		*client;
>>> +	struct v4l2_subdev		sd;
>>> +#define MAX9271_SOURCE_PAD	0
>>> +#define MAX9271_SINK_PAD	1
>>> +	struct media_pad		pads[2];
>>> +	struct v4l2_async_notifier	notifier;
>>> +	struct v4l2_async_subdev	*asd;
>>> +	struct v4l2_ctrl_handler	ctrls;
>>> +	struct v4l2_subdev		*sensor;
>>> +};
>>> +
>>> +static inline struct max9271_device *sd_to_max9271(struct v4l2_subdev *sd)
>>> +{
>>> +	return container_of(sd, struct max9271_device, sd);
>>> +}
>>> +
>>> +static inline struct max9271_device *i2c_to_max9271(struct i2c_client *client)
>>> +{
>>> +	return sd_to_max9271(i2c_get_clientdata(client));
>>> +}
>>> +
>>> +static inline struct max9271_device *notifier_to_max9271(
>>> +						struct v4l2_async_notifier *nf)
>>> +{
>>> +	return container_of(nf, struct max9271_device, notifier);
>>> +}
>>> +
>>> +/* --- MAX9271 hardware operations --- */
>>> +
>>> +static int max9271_read(struct max9271_device *dev, u8 reg)
>>> +{
>>> +	int ret;
>>> +
>>> +	dev_dbg(&dev->client->dev, "%s(0x%02x)\n", __func__, reg);
>>> +
>>> +	ret = i2c_smbus_read_byte_data(dev->client, reg);
>>> +	if (ret < 0)
>>> +		dev_dbg(&dev->client->dev,
>>> +			"%s: register 0x%02x read failed (%d)\n",
>>> +			__func__, reg, ret);
>>> +
>>> +	return ret;
>>> +}
>>> +
>>> +static int max9271_write(struct max9271_device *dev, u8 reg, u8 val)
>>> +{
>>> +	int ret;
>>> +
>>> +	dev_dbg(&dev->client->dev, "%s(0x%02x, 0x%02x)\n", __func__, reg, val);
>>> +
>>> +	ret = i2c_smbus_write_byte_data(dev->client, reg, val);
>>> +	if (ret < 0)
>>> +		dev_err(&dev->client->dev,
>>> +			"%s: register 0x%02x write failed (%d)\n",
>>> +			__func__, reg, ret);
>>> +
>>> +	return ret;
>>> +}
>>> +
>>> +/*
>>> + * max9271_pclk_detect() - Detect valid pixel clock from image sensor
>>> + *
>>> + * Wait up to 10ms for a valid pixel clock.
>>> + *
>>> + * Returns 0 for success, < 0 for pixel clock not properly detected
>>> + */
>>> +static int max9271_pclk_detect(struct max9271_device *dev)
>>> +{
>>> +	unsigned int i;
>>> +	int ret;
>>> +
>>> +	for (i = 0; i < 100; i++) {
>>> +		ret = max9271_read(dev, 0x15);
>>> +		if (ret < 0)
>>> +			return ret;
>>> +
>>> +		if (ret & MAX9271_PCLKDET)
>>> +			return 0;
>>> +
>>> +		usleep_range(50, 100);
>>> +	}
>>> +
>>> +	dev_err(&dev->client->dev, "Unable to detect valid pixel clock\n");
>>> +
>>> +	return -EIO;
>>> +}
>>> +
>>> +static void max9271_wake_up(struct max9271_device *dev)
>>> +{
>>> +	/*
>>> +	 * Use the chip default address as this function has to be called
>>> +	 * before any other one.
>>> +	 */
>>> +	dev->client->addr = MAX9271_DEFAULT_ADDR;
>>> +	i2c_smbus_read_byte(dev->client);
>>> +	usleep_range(5000, 8000);
>>> +}
>>> +
>>> +static int max9271_set_serial_link(struct max9271_device *dev, bool enable)
>>> +{
>>> +	int ret;
>>> +	u8 val = MAX9271_REVCCEN | MAX9271_FWDCCEN;
>>> +
>>> +	if (enable) {
>>> +		ret = max9271_pclk_detect(dev);
>>> +		if (ret)
>>> +			return ret;
>>> +
>>> +		val |= MAX9271_SEREN;
>>> +	} else {
>>> +		val |= MAX9271_CLINKEN;
>>> +	}
>>> +
>>> +	/*
>>> +	 * The serializer temporarily disables the reverse control channel for
>>> +	 * 350µs after starting/stopping the forward serial link, but the
>>> +	 * deserializer synchronization time isn't clearly documented.
>>> +	 *
>>> +	 * According to the serializer datasheet we should wait 3ms, while
>>> +	 * according to the deserializer datasheet we should wait 5ms.
>>> +	 *
>>> +	 * Short delays here appear to show bit-errors in the writes following.
>>> +	 * Therefore a conservative delay seems best here.
>>> +	 */
>>> +	ret = max9271_write(dev, 0x04, val);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	usleep_range(5000, 8000);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int max9271_configure_i2c(struct max9271_device *dev, u8 i2c_config)
>>> +{
>>> +	int ret;
>>> +
>>> +	ret = max9271_write(dev, 0x0d, i2c_config);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	/* The delay required after an I2C bus configuration change is not
>>
>> /*
>>  * The delay ... ?
>>
> 
> Ah, ups
> 
>>
>>
>>> +	 * characterized in the serializer manual. Sleep up to 5msec to
>>> +	 * stay safe.
>>> +	 */
>>> +	usleep_range(3500, 5000);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int max9271_set_high_threshold(struct max9271_device *dev, bool enable)
>>> +{
>>> +	int ret;
>>> +
>>> +	ret = max9271_read(dev, 0x08);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	/*
>>> +	 * Enable or disable reverse channel high threshold to increase
>>> +	 * immunity to power supply noise.
>>> +	 */
>>> +	ret = max9271_write(dev, 0x08, enable ? ret | BIT(0) : ret & ~BIT(0));
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	usleep_range(2000, 2500);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int max9271_configure_gmsl_link(struct max9271_device *dev)
>>> +{
>>> +	int ret;
>>> +
>>> +	/*
>>> +	 * Configure the GMSL link:
>>> +	 *
>>> +	 * - Double input mode, high data rate, 24-bit mode
>>> +	 * - Latch input data on PCLKIN rising edge
>>> +	 * - Enable HS/VS encoding
>>> +	 * - 1-bit parity error detection
>>> +	 *
>>> +	 * TODO: Make the GMSL link configuration parametric.
>>> +	 */
>>> +	ret = max9271_write(dev, 0x07, MAX9271_DBL | MAX9271_HVEN |
>>> +			    MAX9271_EDC_1BIT_PARITY);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	usleep_range(5000, 8000);
>>> +
>>> +	/*
>>> +	 * Adjust spread spectrum to +4% and auto-detect pixel clock
>>> +	 * and serial link rate.
>>> +	 */
>>> +	ret = max9271_write(dev, 0x02,
>>> +			    MAX9271_SPREAD_SPECT_4 | MAX9271_R02_RES |
>>> +			    MAX9271_PCLK_AUTODETECT |
>>> +			    MAX9271_SERIAL_AUTODETECT);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	usleep_range(5000, 8000);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int max9271_set_gpios(struct max9271_device *dev, u8 gpio_mask)
>>> +{
>>> +	int ret;
>>> +
>>> +	ret = max9271_read(dev, 0x0f);
>>
>> What is 0x0f?
>>
>> Ah - the registers are unnamed...
>>
>> Seems a shame..
> 
> It is a bit. If the overall approach is validated, I'll go and
> beautify the driver.

Indeed, well they don't have names in the datasheet was my point, but I
guess we could give them names of their expected usage ...




>>> +	if (ret < 0)
>>> +		return 0;
>>> +
>>> +	ret |= gpio_mask;
>>> +	ret = max9271_write(dev, 0x0f, ret);
>>> +	if (ret < 0) {
>>> +		dev_err(&dev->client->dev, "Failed to set gpio (%d)\n", ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	usleep_range(3500, 5000);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int max9271_clear_gpios(struct max9271_device *dev, u8 gpio_mask)
>>> +{
>>> +	int ret;
>>> +
>>> +	ret = max9271_read(dev, 0x0f);
>>> +	if (ret < 0)
>>> +		return 0;
>>> +
>>> +	ret &= ~gpio_mask;
>>> +	ret = max9271_write(dev, 0x0f, ret);
>>> +	if (ret < 0) {
>>> +		dev_err(&dev->client->dev, "Failed to clear gpio (%d)\n", ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	usleep_range(3500, 5000);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int max9271_enable_gpios(struct max9271_device *dev, u8 gpio_mask)
>>> +{
>>> +	int ret;
>>> +
>>> +	ret = max9271_read(dev, 0x0e);
>>> +	if (ret < 0)
>>> +		return 0;
>>> +
>>> +	/* BIT(0) reserved: GPO is always enabled. */
>>> +	ret |= (gpio_mask & ~BIT(0));
>>> +	ret = max9271_write(dev, 0x0e, ret);
>>> +	if (ret < 0) {
>>> +		dev_err(&dev->client->dev, "Failed to enable gpio (%d)\n", ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	usleep_range(3500, 5000);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int max9271_verify_id(struct max9271_device *dev)
>>> +{
>>> +	int ret;
>>> +
>>> +	ret = max9271_read(dev, 0x1e);
>>> +	if (ret < 0) {
>>> +		dev_err(&dev->client->dev, "MAX9271 ID read failed (%d)\n",
>>> +			ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	if (ret != MAX9271_ID) {
>>> +		dev_err(&dev->client->dev, "MAX9271 ID mismatch (0x%02x)\n",
>>> +			ret);
>>> +		return -ENXIO;
>>> +	}
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int max9271_set_address(struct max9271_device *dev, u8 addr)
>>> +{
>>> +	int ret;
>>> +
>>> +	ret = max9271_write(dev, 0x00, addr << 1);
>>> +	if (ret < 0) {
>>> +		dev_err(&dev->client->dev,
>>> +			"MAX9271 I2C address change failed (%d)\n", ret);
>>> +		return ret;
>>> +	}
>>> +	usleep_range(3500, 5000);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +/* --- V4L2 Subdev Ops --- */
>>> +
>>> +static int max9271_s_stream(struct v4l2_subdev *sd, int enable)
>>> +{
>>> +	struct max9271_device *max9271 = sd_to_max9271(sd);
>>> +
>>> +	return max9271_set_serial_link(max9271, enable);
>>> +}
>>> +
>>> +static int max9271_enum_mbus_code(struct v4l2_subdev *sd,
>>> +				  struct v4l2_subdev_state *sd_state,
>>> +				  struct v4l2_subdev_mbus_code_enum *code)
>>> +{
>>> +	struct max9271_device *max9271 = sd_to_max9271(sd);
>>> +
>>> +	return v4l2_subdev_call(max9271->sensor, pad, enum_mbus_code, NULL,
>>> +				code);
>>> +}
>>> +
>>> +static int max9271_get_fmt(struct v4l2_subdev *sd,
>>> +			   struct v4l2_subdev_state *sd_state,
>>> +			   struct v4l2_subdev_format *format)
>>> +{
>>> +	struct max9271_device *max9271 = sd_to_max9271(sd);
>>> +
>>> +	return v4l2_subdev_call(max9271->sensor, pad, get_fmt, NULL,
>>> +				format);
>>> +}
>>> +
>>> +static int max9271_set_fmt(struct v4l2_subdev *sd,
>>> +			   struct v4l2_subdev_state *sd_state,
>>> +			   struct v4l2_subdev_format *format)
>>> +{
>>> +	struct max9271_device *max9271 = sd_to_max9271(sd);
>>> +
>>> +	return v4l2_subdev_call(max9271->sensor, pad, set_fmt, NULL,
>>> +				format);
>>> +}
>>> +
>>> +static int max9271_post_register(struct v4l2_subdev *sd)
>>> +{
>>> +	struct max9271_device *max9271 = sd_to_max9271(sd);
>>> +	int ret;
>>> +
>>> +	ret = max9271_verify_id(max9271);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	ret = max9271_enable_gpios(max9271, MAX9271_GPIO1OUT);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	ret = max9271_configure_gmsl_link(max9271);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static const struct v4l2_subdev_video_ops max9271_video_ops = {
>>> +	.s_stream	= max9271_s_stream,
>>> +};
>>> +
>>> +static const struct v4l2_subdev_pad_ops max9271_subdev_pad_ops = {
>>> +	.enum_mbus_code = max9271_enum_mbus_code,
>>> +	.get_fmt	= max9271_get_fmt,
>>> +	.set_fmt	= max9271_set_fmt,
>>> +};
>>> +
>>> +static const struct v4l2_subdev_core_ops max9271_core_ops = {
>>> +	.post_register	= max9271_post_register,
>>> +};
>>> +
>>> +static const struct v4l2_subdev_ops max9271_subdev_ops = {
>>> +	.core		= &max9271_core_ops,
>>> +	.video		= &max9271_video_ops,
>>> +	.pad		= &max9271_subdev_pad_ops,
>>> +};
>>> +
>>> +/* --- V4L2 Async Notifier --- */
>>> +
>>> +static int max9271_notify_bound(struct v4l2_async_notifier *notifier,
>>> +				struct v4l2_subdev *subdev,
>>> +				struct v4l2_async_subdev *asd)
>>> +{
>>> +	struct max9271_device *max9271 = notifier_to_max9271(notifier);
>>> +	int ret, pad;
>>> +
>>> +	/*
>>> +	 * Reserve more space than necessary for controls inherited by the
>>> +	 * remote subdev.
>>> +	 */
>>> +	ret = v4l2_ctrl_handler_init(&max9271->ctrls, 16);
>>> +	if (ret < 0) {
>>> +		dev_err(max9271->dev,
>>> +			"Unable to initialize control handler: %d\n", ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	ret = v4l2_ctrl_add_handler(&max9271->ctrls, subdev->ctrl_handler,
>>> +				    NULL, true);
>>> +	if (ret < 0) {
>>> +		dev_err(max9271->dev,
>>> +			"Unable to add subdev control handler: %d\n", ret);
>>> +		goto error_free_handler;
>>> +	}
>>> +	max9271->sd.ctrl_handler = &max9271->ctrls;
>>> +
>>> +	/* Create media link with the remote sensor source pad. */
>>> +	pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
>>> +					  MEDIA_PAD_FL_SOURCE);
>>> +	if (pad < 0) {
>>> +		dev_err(max9271->dev,
>>> +			"Failed to find source pad for %s\n", subdev->name);
>>> +		ret = pad;
>>> +		goto error_free_handler;
>>> +	}
>>> +
>>> +	ret = media_create_pad_link(&subdev->entity, pad,
>>> +				    &max9271->sd.entity, MAX9271_SINK_PAD,
>>> +				    MEDIA_LNK_FL_ENABLED |
>>> +				    MEDIA_LNK_FL_IMMUTABLE);
>>> +	if (ret)
>>> +		goto error_free_handler;
>>> +
>>> +	max9271->sensor = subdev;
>>> +
>>> +	/*
>>> +	 * Hold OV10635 in reset during max9271 configuration. The reset signal
>>
>> Hold the sensor in reset ...
>>
>> But are all sensors guaranteed to be connected to the GPIO in the same way?
>>
>> Will this cause us issues? - does the GPIO need to be modelled somehow
>> to determine what's connected to them?
>>
>>
>>
>>> +	 * has to be asserted for at least 200 microseconds.
>>> +	 */
>>> +	ret = max9271_clear_gpios(max9271, MAX9271_GPIO1OUT);
>>> +	if (ret)
>>> +		return ret;
>>> +	usleep_range(200, 500);
>>> +
>>> +	/*
>>> +	 * Release ov10635 from reset and initialize it. The image sensor
>>> +	 * requires at least 2048 XVCLK cycles (85 micro-seconds at 24MHz)
>>> +	 * before being available. Stay safe and wait up to 500 micro-seconds.
>>
>> More sensor specific ... what needs to be abstracted here?
> 
> Yes indeed. As pointed out in the cover letter the handling of the
> sensor's reset line should go through the gpiod API, and will probably
> require installing a gpiochip in the max9271 driver.

Ok - I missed that, sorry.



>>> +	 */
>>> +	ret = max9271_set_gpios(max9271, MAX9271_GPIO1OUT);
>>> +	if (ret)
>>> +		return ret;
>>> +	usleep_range(100, 500);
>>> +
>>> +	/*
>>> +	 * Call the sensor post_register operation to complete its
>>> +	 * initialization.
>>> +	 */
>>> +	ret = v4l2_subdev_call(max9271->sensor, core, post_register);
>>> +	if (ret) {
>>> +		dev_err(max9271->dev, "Failed to initialize sensor %u\n", ret);
>>> +		goto error_remove_link;
>>> +	}
>>> +
>>> +	return 0;
>>> +
>>> +error_remove_link:
>>> +	media_entity_remove_links(&max9271->sd.entity);
>>> +	max9271->sensor = NULL;
>>> +
>>> +error_free_handler:
>>> +	v4l2_ctrl_handler_free(&max9271->ctrls);
>>> +	max9271->sd.ctrl_handler = NULL;
>>> +
>>> +	return ret;
>>> +}
>>> +
>>> +static void max9271_notify_unbind(struct v4l2_async_notifier *notifier,
>>> +				  struct v4l2_subdev *subdev,
>>> +				  struct v4l2_async_subdev *asd)
>>> +{
>>> +	struct max9271_device *max9271 = notifier_to_max9271(notifier);
>>> +
>>> +	media_entity_remove_links(&max9271->sd.entity);
>>> +	max9271->sensor = NULL;
>>> +}
>>> +
>>> +static const struct v4l2_async_notifier_operations max9271_notifier_ops = {
>>> +	.bound = max9271_notify_bound,
>>> +	.unbind = max9271_notify_unbind,
>>> +};
>>> +
>>> +static int max9271_parse_dt(struct max9271_device *max9271)
>>> +{
>>> +	struct fwnode_handle *ep, *remote;
>>> +	struct v4l2_fwnode_endpoint vep = {
>>> +		.bus_type = V4L2_MBUS_PARALLEL,
>>> +	};
>>> +	int ret;
>>> +
>>> +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(max9271->dev), 1, 0, 0);
>>> +	if (!ep) {
>>> +		dev_err(max9271->dev, "Unable to get sensor endpoint: %pOF\n",
>>> +			max9271->dev->of_node);
>>> +		return -ENOENT;
>>> +	}
>>> +
>>> +	remote = fwnode_graph_get_remote_endpoint(ep);
>>> +	if (!remote) {
>>> +		dev_err(max9271->dev, "Unable to get remote endpoint: %pOF\n",
>>> +			max9271->dev->of_node);
>>> +		return -ENOENT;
>>> +	}
>>> +
>>> +	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
>>> +	fwnode_handle_put(ep);
>>> +	if (ret) {
>>> +		fwnode_handle_put(remote);
>>> +		dev_err(max9271->dev, "Unable to parse endpoint: %pOF\n",
>>> +			to_of_node(ep));
>>> +		return ret;
>>> +	}
>>> +
>>> +	v4l2_async_notifier_init(&max9271->notifier);
>>> +	max9271->asd = v4l2_async_notifier_add_fwnode_subdev(&max9271->notifier,
>>> +					      remote, struct v4l2_async_subdev);
>>> +	fwnode_handle_put(remote);
>>> +	if (IS_ERR(max9271->asd))
>>> +		return PTR_ERR(max9271->asd);
>>> +
>>> +	max9271->notifier.ops = &max9271_notifier_ops;
>>> +	max9271->notifier.flags = V4L2_ASYNC_NOTIFIER_DEFER_POST_REGISTER;
>>
>> This looks new, I'll have to read up on it ...
> 
> It is. I am pushing to get feedback on this since a few months now.
> If you wish to help:
> https://patchwork.linuxtv.org/project/linux-media/list/?series=5847
> 
>>
>>
>>> +	ret = v4l2_async_subdev_notifier_register(&max9271->sd,
>>> +						  &max9271->notifier);
>>> +	if (ret < 0) {
>>> +		v4l2_async_notifier_cleanup(&max9271->notifier);
>>> +		return ret;
>>> +	}
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int max9271_init(struct max9271_device *max9271)
>>> +{
>>> +	int ret;
>>> +	u8 addr;
>>> +
>>> +	max9271_wake_up(max9271);
>>
>> This call has just set max9271->client->addr = MAX9271_DEFAULT_ADDR, so
>> the original has now been lost.
> 
> Doh! I overlooked the fact max9271_wake_up() silently overwrites the
> i2c client address. For the reasons explained in the cover letter I've
> been able to test this patch with a single camera only, so the issue
> went unnoticed here. Thanks for spotting!

That's what extra eyes are for ;-)


>>> +
>>> +	/* Re-program the chip address. */
>>> +	addr = max9271->client->addr;
>>> +	max9271->client->addr = MAX9271_DEFAULT_ADDR;
>>> +	ret = max9271_set_address(max9271, addr);
>>
>> So this is currently broken :S
>>
>>> +	if (ret < 0)
>>> +		return ret;
>>> +	max9271->client->addr = addr;
>>> +
>>> +	/* Serial link disabled during conf as it needs a valid pixel clock. */
>>> +	ret = max9271_set_serial_link(max9271, false);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	/*
>>> +	 *  Ensure that we have a good link configuration before attempting to
>>> +	 *  identify the device.
>>> +	 */
>>> +	ret = max9271_configure_i2c(max9271, MAX9271_I2CSLVSH_469NS_234NS |
>>> +					     MAX9271_I2CSLVTO_1024US |
>>> +					     MAX9271_I2CMSTBT_105KBPS);
>>
>> Are these parameters tied to the max9286 ?
>>
> 
> More to the I2c bus configuration and should probably be made
> configurable through the canonical i2c DTS properties.

Ok


>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	/*
>>> +	 * Set reverse channel high threshold to increase noise immunity.
>>> +	 *
>>> +	 * This should be compensated by increasing the reverse channel
>>> +	 * amplitude on the remote deserializer side.
>>> +	 */
>>> +	return max9271_set_high_threshold(max9271, true);
>>> +}
>>> +
>>> +static int max9271_probe(struct i2c_client *client)
>>> +{
>>> +	struct max9271_device *max9271;
>>> +	struct fwnode_handle *ep;
>>> +	int ret;
>>> +
>>> +	max9271 = devm_kzalloc(&client->dev, sizeof(*max9271), GFP_KERNEL);
>>> +	if (!max9271)
>>> +		return -ENOMEM;
>>> +	max9271->dev = &client->dev;
>>> +	max9271->client = client;
>>> +
>>> +	/* Initialize and register the subdevice. */
>>> +	v4l2_i2c_subdev_init(&max9271->sd, client, &max9271_subdev_ops);
>>> +	max9271->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>>> +	max9271->pads[MAX9271_SOURCE_PAD].flags = MEDIA_PAD_FL_SOURCE;
>>> +	max9271->pads[MAX9271_SINK_PAD].flags = MEDIA_PAD_FL_SINK;
>>> +	max9271->sd.entity.flags |= MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
>>
>> Is it a formatter - do we need a new/different entity type?
> 
> I admit I had an hard time choosing the correct entity type :)

Yes, I suspect it might just be that it's a distinct new thing? ...


>>> +	ret = media_entity_pads_init(&max9271->sd.entity, 2, max9271->pads);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(max9271->dev), 0, 0, 0);
>>> +	if (!ep) {
>>> +		dev_err(max9271->dev, "Unable to get endpoint 0: %pOF\n",
>>> +			max9271->dev->of_node);
>>> +		ret = -ENODEV;
>>> +		goto error_media_entity;
>>> +	}
>>> +
>>> +	max9271->sd.fwnode = ep;
>>> +	ret = v4l2_async_register_subdev(&max9271->sd);
>>> +	if (ret)
>>> +		goto error_put_node;
>>> +
>>> +	ret = max9271_parse_dt(max9271);
>>> +	if (ret)
>>> +		goto error_unregister_subdev;
>>> +
>>> +	ret = max9271_init(max9271);
>>> +	if (ret)
>>> +		goto error_unregister_subdev;
>>> +
>>> +	return 0;
>>> +
>>> +error_unregister_subdev:
>>> +	v4l2_async_unregister_subdev(&max9271->sd);
>>> +error_put_node:
>>> +	fwnode_handle_put(max9271->sd.fwnode);
>>> +error_media_entity:
>>> +	media_entity_cleanup(&max9271->sd.entity);
>>> +
>>> +	return ret;
>>> +}
>>> +
>>> +static int max9271_remove(struct i2c_client *client)
>>> +{
>>> +	struct max9271_device *max9271 = i2c_to_max9271(client);
>>> +
>>> +	v4l2_ctrl_handler_free(&max9271->ctrls);
>>> +	v4l2_async_notifier_cleanup(&max9271->notifier);
>>> +	v4l2_async_unregister_subdev(&max9271->sd);
>>> +	fwnode_handle_put(max9271->sd.fwnode);
>>> +	media_entity_cleanup(&max9271->sd.entity);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static const struct of_device_id max9271_of_ids[] = {
>>> +	{ .compatible = "imi,max9271", },
>>
>> This should be a 'maxim' prefix now, not IMI.
>>
> 
> Indeed!
> 
> Thanks
>   j
> 
>>
>>> +	{ }
>>> +};
>>> +MODULE_DEVICE_TABLE(of, max9271_of_ids);
>>> +
>>> +static struct i2c_driver max9271_i2c_driver = {
>>> +	.driver	= {
>>> +		.name	= "max9271",
>>> +		.of_match_table = max9271_of_ids,
>>> +	},
>>> +	.probe_new	= max9271_probe,
>>> +	.remove		= max9271_remove,
>>> +};
>>> +
>>> +module_i2c_driver(max9271_i2c_driver);
>>> +
>>> +MODULE_DESCRIPTION("MAX9271 GMSL serializer subdevice driver");
>>> +MODULE_AUTHOR("Jacopo Mondi");
>>> +MODULE_LICENSE("GPL");
>>>
Laurent Pinchart Aug. 23, 2021, 2:22 a.m. UTC | #4
On Wed, Aug 18, 2021 at 10:27:00AM +0200, Jacopo Mondi wrote:
> Hi Kieran, thanks for review!
> 
> On Tue, Aug 17, 2021 at 04:49:17PM +0100, Kieran Bingham wrote:
> > Hi Jacopo,
> >
> > On 17/08/2021 08:27, Jacopo Mondi wrote:
> > > The MAX9271 is a GMSL serializer that serializes a video stream
> > > received from an image sensor through the parallel video bus.
> >
> >
> > https://datasheets.maximintegrated.com/en/ds/MAX9271.pdf calls it a
> > "16-Bit GMSL Serializer with Coas or STP Cable Drive"
> >
> 
> Nice we have a public datasheet now!
> Nice, well, it might mean GMSL is just old ?
> 
> >
> > > The serializer it's usually found embedded with an image sensor and
> >
> > s/it's/is/
> >
> > > other ancillary chips in camera modules like RDACM20 and RDACM21.
> > >
> > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > > ---
> > >  MAINTAINERS                 |   9 +
> > >  drivers/media/i2c/Kconfig   |  12 +
> > >  drivers/media/i2c/Makefile  |   1 +
> > >  drivers/media/i2c/max9271.c | 756 ++++++++++++++++++++++++++++++++++++
> > >  4 files changed, 778 insertions(+)
> > >  create mode 100644 drivers/media/i2c/max9271.c
> > >
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index 7ad89cac19b7..2dab25a08c9c 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -11244,6 +11244,15 @@ F:	Documentation/hwmon/max6697.rst
> > >  F:	drivers/hwmon/max6697.c
> > >  F:	include/linux/platform_data/max6697.h
> > >
> > > +MAX9271 GMSL SERIALIZER DRIVER
> > > +M:	Jacopo Mondi <jacopo+renesas@jmondi.org>
> > > +M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> > > +M:	Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > > +M:	Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > > +L:	linux-media@vger.kernel.org
> > > +S:	Maintained
> > > +F:	drivers/media/i2c/max9271.c
> > > +
> > >  MAX9286 QUAD GMSL DESERIALIZER DRIVER
> > >  M:	Jacopo Mondi <jacopo+renesas@jmondi.org>
> > >  M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > > index 08feb3e8c1bf..b793d1f322d9 100644
> > > --- a/drivers/media/i2c/Kconfig
> > > +++ b/drivers/media/i2c/Kconfig
> > > @@ -1300,6 +1300,18 @@ source "drivers/media/i2c/m5mols/Kconfig"
> > >  config VIDEO_MAX9271_LIB
> > >  	tristate
> > >
> > > +config VIDEO_MAX9271
> > > +	tristate "MAX9271 GMSL serializer support"
> > > +	depends on I2C
> > > +	select V4L2_FWNODE
> > > +	select VIDEO_V4L2_SUBDEV_API
> > > +	select MEDIA_CONTROLLER
> > > +	help
> > > +	  This driver supports the Maxim MAX9271 GMSL serializer.
> > > +
> > > +	  To compile this driver as a module, choose M here: the
> > > +	  module will be called max9271.
> > > +
> > >  config VIDEO_RDACM20
> > >  	tristate "IMI RDACM20 camera support"
> > >  	depends on I2C
> > > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > > index 4d879373bd48..37bb51065574 100644
> > > --- a/drivers/media/i2c/Makefile
> > > +++ b/drivers/media/i2c/Makefile
> > > @@ -130,6 +130,7 @@ obj-$(CONFIG_VIDEO_IMX355)	+= imx355.o
> > >  obj-$(CONFIG_VIDEO_IMX412)	+= imx412.o
> > >  obj-$(CONFIG_VIDEO_MAX9286)	+= max9286.o
> > >  obj-$(CONFIG_VIDEO_MAX9271_LIB)	+= max9271-lib.o
> > > +obj-$(CONFIG_VIDEO_MAX9271)	+= max9271.o
> > >  obj-$(CONFIG_VIDEO_RDACM20)	+= rdacm20.o
> > >  obj-$(CONFIG_VIDEO_RDACM21)	+= rdacm21.o
> > >  obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
> > > diff --git a/drivers/media/i2c/max9271.c b/drivers/media/i2c/max9271.c
> > > new file mode 100644
> > > index 000000000000..64987cba3d3e
> > > --- /dev/null
> > > +++ b/drivers/media/i2c/max9271.c
> > > @@ -0,0 +1,756 @@
> > > +// SPDX-License-Identifier: GPL-2.0+
> > > +/*
> > > + * Copyright (C) 2017-2021 Jacopo Mondi
> > > + * Copyright (C) 2017-2020 Kieran Bingham
> > > + * Copyright (C) 2017-2019 Laurent Pinchart
> > > + * Copyright (C) 2017-2019 Niklas Söderlund
> > > + * Copyright (C) 2016 Renesas Electronics Corporation
> > > + * Copyright (C) 2015 Cogent Embedded, Inc.
> > > + */
> > > +
> > > +#include <linux/delay.h>
> > > +#include <linux/fwnode.h>
> > > +#include <linux/init.h>
> > > +#include <linux/i2c.h>
> > > +#include <linux/module.h>
> > > +#include <linux/property.h>
> > > +
> > > +#include <media/v4l2-async.h>
> > > +#include <media/v4l2-ctrls.h>
> > > +#include <media/v4l2-fwnode.h>
> > > +#include <media/v4l2-subdev.h>
> > > +
> > > +#define MAX9271_DEFAULT_ADDR	0x40
> > > +
> > > +/* Register 0x02 */
> > > +#define MAX9271_SPREAD_SPECT_0		(0 << 5)
> > > +#define MAX9271_SPREAD_SPECT_05		(1 << 5)
> > > +#define MAX9271_SPREAD_SPECT_15		(2 << 5)
> > > +#define MAX9271_SPREAD_SPECT_1		(5 << 5)
> > > +#define MAX9271_SPREAD_SPECT_2		(3 << 5)
> > > +#define MAX9271_SPREAD_SPECT_3		(6 << 5)
> > > +#define MAX9271_SPREAD_SPECT_4		(7 << 5)
> > > +#define MAX9271_R02_RES			BIT(4)
> > > +#define MAX9271_PCLK_AUTODETECT		(3 << 2)
> > > +#define MAX9271_SERIAL_AUTODETECT	(0x03)
> > > +/* Register 0x04 */
> > > +#define MAX9271_SEREN			BIT(7)
> > > +#define MAX9271_CLINKEN			BIT(6)
> > > +#define MAX9271_PRBSEN			BIT(5)
> > > +#define MAX9271_SLEEP			BIT(4)
> > > +#define MAX9271_INTTYPE_I2C		(0 << 2)
> > > +#define MAX9271_INTTYPE_UART		(1 << 2)
> > > +#define MAX9271_INTTYPE_NONE		(2 << 2)
> > > +#define MAX9271_REVCCEN			BIT(1)
> > > +#define MAX9271_FWDCCEN			BIT(0)
> > > +/* Register 0x07 */
> > > +#define MAX9271_DBL			BIT(7)
> > > +#define MAX9271_DRS			BIT(6)
> > > +#define MAX9271_BWS			BIT(5)
> > > +#define MAX9271_ES			BIT(4)
> > > +#define MAX9271_HVEN			BIT(2)
> > > +#define MAX9271_EDC_1BIT_PARITY		(0 << 0)
> > > +#define MAX9271_EDC_6BIT_CRC		(1 << 0)
> > > +#define MAX9271_EDC_6BIT_HAMMING	(2 << 0)
> > > +/* Register 0x08 */
> > > +#define MAX9271_INVVS			BIT(7)
> > > +#define MAX9271_INVHS			BIT(6)
> > > +#define MAX9271_REV_LOGAIN		BIT(3)
> > > +#define MAX9271_REV_HIVTH		BIT(0)
> > > +/* Register 0x09 */
> > > +#define MAX9271_ID			0x09
> > > +/* Register 0x0d */
> > > +#define MAX9271_I2CLOCACK		BIT(7)
> > > +#define MAX9271_I2CSLVSH_1046NS_469NS	(3 << 5)
> > > +#define MAX9271_I2CSLVSH_938NS_352NS	(2 << 5)
> > > +#define MAX9271_I2CSLVSH_469NS_234NS	(1 << 5)
> > > +#define MAX9271_I2CSLVSH_352NS_117NS	(0 << 5)
> > > +#define MAX9271_I2CMSTBT_837KBPS	(7 << 2)
> > > +#define MAX9271_I2CMSTBT_533KBPS	(6 << 2)
> > > +#define MAX9271_I2CMSTBT_339KBPS	(5 << 2)
> > > +#define MAX9271_I2CMSTBT_173KBPS	(4 << 2)
> > > +#define MAX9271_I2CMSTBT_105KBPS	(3 << 2)
> > > +#define MAX9271_I2CMSTBT_84KBPS		(2 << 2)
> > > +#define MAX9271_I2CMSTBT_28KBPS		(1 << 2)
> > > +#define MAX9271_I2CMSTBT_8KBPS		(0 << 2)
> > > +#define MAX9271_I2CSLVTO_NONE		(3 << 0)
> > > +#define MAX9271_I2CSLVTO_1024US		(2 << 0)
> > > +#define MAX9271_I2CSLVTO_256US		(1 << 0)
> > > +#define MAX9271_I2CSLVTO_64US		(0 << 0)
> > > +/* Register 0x0f */
> > > +#define MAX9271_GPIO5OUT		BIT(5)
> > > +#define MAX9271_GPIO4OUT		BIT(4)
> > > +#define MAX9271_GPIO3OUT		BIT(3)
> > > +#define MAX9271_GPIO2OUT		BIT(2)
> > > +#define MAX9271_GPIO1OUT		BIT(1)
> > > +#define MAX9271_GPO			BIT(0)
> > > +/* Register 0x15 */
> > > +#define MAX9271_PCLKDET			BIT(0)
> > > +
> > > +struct max9271_device {
> > > +	struct device			*dev;
> > > +	struct i2c_client		*client;
> > > +	struct v4l2_subdev		sd;
> > > +#define MAX9271_SOURCE_PAD	0
> > > +#define MAX9271_SINK_PAD	1
> > > +	struct media_pad		pads[2];
> > > +	struct v4l2_async_notifier	notifier;
> > > +	struct v4l2_async_subdev	*asd;
> > > +	struct v4l2_ctrl_handler	ctrls;
> > > +	struct v4l2_subdev		*sensor;
> > > +};
> > > +
> > > +static inline struct max9271_device *sd_to_max9271(struct v4l2_subdev *sd)
> > > +{
> > > +	return container_of(sd, struct max9271_device, sd);
> > > +}
> > > +
> > > +static inline struct max9271_device *i2c_to_max9271(struct i2c_client *client)
> > > +{
> > > +	return sd_to_max9271(i2c_get_clientdata(client));
> > > +}
> > > +
> > > +static inline struct max9271_device *notifier_to_max9271(
> > > +						struct v4l2_async_notifier *nf)
> > > +{
> > > +	return container_of(nf, struct max9271_device, notifier);
> > > +}
> > > +
> > > +/* --- MAX9271 hardware operations --- */
> > > +
> > > +static int max9271_read(struct max9271_device *dev, u8 reg)
> > > +{
> > > +	int ret;
> > > +
> > > +	dev_dbg(&dev->client->dev, "%s(0x%02x)\n", __func__, reg);
> > > +
> > > +	ret = i2c_smbus_read_byte_data(dev->client, reg);
> > > +	if (ret < 0)
> > > +		dev_dbg(&dev->client->dev,
> > > +			"%s: register 0x%02x read failed (%d)\n",
> > > +			__func__, reg, ret);
> > > +
> > > +	return ret;
> > > +}
> > > +
> > > +static int max9271_write(struct max9271_device *dev, u8 reg, u8 val)
> > > +{
> > > +	int ret;
> > > +
> > > +	dev_dbg(&dev->client->dev, "%s(0x%02x, 0x%02x)\n", __func__, reg, val);
> > > +
> > > +	ret = i2c_smbus_write_byte_data(dev->client, reg, val);
> > > +	if (ret < 0)
> > > +		dev_err(&dev->client->dev,
> > > +			"%s: register 0x%02x write failed (%d)\n",
> > > +			__func__, reg, ret);
> > > +
> > > +	return ret;
> > > +}
> > > +
> > > +/*
> > > + * max9271_pclk_detect() - Detect valid pixel clock from image sensor
> > > + *
> > > + * Wait up to 10ms for a valid pixel clock.
> > > + *
> > > + * Returns 0 for success, < 0 for pixel clock not properly detected
> > > + */
> > > +static int max9271_pclk_detect(struct max9271_device *dev)
> > > +{
> > > +	unsigned int i;
> > > +	int ret;
> > > +
> > > +	for (i = 0; i < 100; i++) {
> > > +		ret = max9271_read(dev, 0x15);
> > > +		if (ret < 0)
> > > +			return ret;
> > > +
> > > +		if (ret & MAX9271_PCLKDET)
> > > +			return 0;
> > > +
> > > +		usleep_range(50, 100);
> > > +	}
> > > +
> > > +	dev_err(&dev->client->dev, "Unable to detect valid pixel clock\n");
> > > +
> > > +	return -EIO;
> > > +}
> > > +
> > > +static void max9271_wake_up(struct max9271_device *dev)
> > > +{
> > > +	/*
> > > +	 * Use the chip default address as this function has to be called
> > > +	 * before any other one.
> > > +	 */
> > > +	dev->client->addr = MAX9271_DEFAULT_ADDR;
> > > +	i2c_smbus_read_byte(dev->client);
> > > +	usleep_range(5000, 8000);
> > > +}
> > > +
> > > +static int max9271_set_serial_link(struct max9271_device *dev, bool enable)
> > > +{
> > > +	int ret;
> > > +	u8 val = MAX9271_REVCCEN | MAX9271_FWDCCEN;
> > > +
> > > +	if (enable) {
> > > +		ret = max9271_pclk_detect(dev);
> > > +		if (ret)
> > > +			return ret;
> > > +
> > > +		val |= MAX9271_SEREN;
> > > +	} else {
> > > +		val |= MAX9271_CLINKEN;
> > > +	}
> > > +
> > > +	/*
> > > +	 * The serializer temporarily disables the reverse control channel for
> > > +	 * 350µs after starting/stopping the forward serial link, but the
> > > +	 * deserializer synchronization time isn't clearly documented.
> > > +	 *
> > > +	 * According to the serializer datasheet we should wait 3ms, while
> > > +	 * according to the deserializer datasheet we should wait 5ms.
> > > +	 *
> > > +	 * Short delays here appear to show bit-errors in the writes following.
> > > +	 * Therefore a conservative delay seems best here.
> > > +	 */
> > > +	ret = max9271_write(dev, 0x04, val);
> > > +	if (ret < 0)
> > > +		return ret;
> > > +
> > > +	usleep_range(5000, 8000);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int max9271_configure_i2c(struct max9271_device *dev, u8 i2c_config)
> > > +{
> > > +	int ret;
> > > +
> > > +	ret = max9271_write(dev, 0x0d, i2c_config);
> > > +	if (ret < 0)
> > > +		return ret;
> > > +
> > > +	/* The delay required after an I2C bus configuration change is not
> >
> > /*
> >  * The delay ... ?
> >
> 
> Ah, ups
> 
> >
> >
> > > +	 * characterized in the serializer manual. Sleep up to 5msec to
> > > +	 * stay safe.
> > > +	 */
> > > +	usleep_range(3500, 5000);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int max9271_set_high_threshold(struct max9271_device *dev, bool enable)
> > > +{
> > > +	int ret;
> > > +
> > > +	ret = max9271_read(dev, 0x08);
> > > +	if (ret < 0)
> > > +		return ret;
> > > +
> > > +	/*
> > > +	 * Enable or disable reverse channel high threshold to increase
> > > +	 * immunity to power supply noise.
> > > +	 */
> > > +	ret = max9271_write(dev, 0x08, enable ? ret | BIT(0) : ret & ~BIT(0));
> > > +	if (ret < 0)
> > > +		return ret;
> > > +
> > > +	usleep_range(2000, 2500);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int max9271_configure_gmsl_link(struct max9271_device *dev)
> > > +{
> > > +	int ret;
> > > +
> > > +	/*
> > > +	 * Configure the GMSL link:
> > > +	 *
> > > +	 * - Double input mode, high data rate, 24-bit mode
> > > +	 * - Latch input data on PCLKIN rising edge
> > > +	 * - Enable HS/VS encoding
> > > +	 * - 1-bit parity error detection
> > > +	 *
> > > +	 * TODO: Make the GMSL link configuration parametric.
> > > +	 */
> > > +	ret = max9271_write(dev, 0x07, MAX9271_DBL | MAX9271_HVEN |
> > > +			    MAX9271_EDC_1BIT_PARITY);
> > > +	if (ret < 0)
> > > +		return ret;
> > > +
> > > +	usleep_range(5000, 8000);
> > > +
> > > +	/*
> > > +	 * Adjust spread spectrum to +4% and auto-detect pixel clock
> > > +	 * and serial link rate.
> > > +	 */
> > > +	ret = max9271_write(dev, 0x02,
> > > +			    MAX9271_SPREAD_SPECT_4 | MAX9271_R02_RES |
> > > +			    MAX9271_PCLK_AUTODETECT |
> > > +			    MAX9271_SERIAL_AUTODETECT);
> > > +	if (ret < 0)
> > > +		return ret;
> > > +
> > > +	usleep_range(5000, 8000);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int max9271_set_gpios(struct max9271_device *dev, u8 gpio_mask)
> > > +{
> > > +	int ret;
> > > +
> > > +	ret = max9271_read(dev, 0x0f);
> >
> > What is 0x0f?
> >
> > Ah - the registers are unnamed...
> >
> > Seems a shame..
> 
> It is a bit. If the overall approach is validated, I'll go and
> beautify the driver.
> 
> >
> >
> > > +	if (ret < 0)
> > > +		return 0;
> > > +
> > > +	ret |= gpio_mask;
> > > +	ret = max9271_write(dev, 0x0f, ret);
> > > +	if (ret < 0) {
> > > +		dev_err(&dev->client->dev, "Failed to set gpio (%d)\n", ret);
> > > +		return ret;
> > > +	}
> > > +
> > > +	usleep_range(3500, 5000);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int max9271_clear_gpios(struct max9271_device *dev, u8 gpio_mask)
> > > +{
> > > +	int ret;
> > > +
> > > +	ret = max9271_read(dev, 0x0f);
> > > +	if (ret < 0)
> > > +		return 0;
> > > +
> > > +	ret &= ~gpio_mask;
> > > +	ret = max9271_write(dev, 0x0f, ret);
> > > +	if (ret < 0) {
> > > +		dev_err(&dev->client->dev, "Failed to clear gpio (%d)\n", ret);
> > > +		return ret;
> > > +	}
> > > +
> > > +	usleep_range(3500, 5000);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int max9271_enable_gpios(struct max9271_device *dev, u8 gpio_mask)
> > > +{
> > > +	int ret;
> > > +
> > > +	ret = max9271_read(dev, 0x0e);
> > > +	if (ret < 0)
> > > +		return 0;
> > > +
> > > +	/* BIT(0) reserved: GPO is always enabled. */
> > > +	ret |= (gpio_mask & ~BIT(0));
> > > +	ret = max9271_write(dev, 0x0e, ret);
> > > +	if (ret < 0) {
> > > +		dev_err(&dev->client->dev, "Failed to enable gpio (%d)\n", ret);
> > > +		return ret;
> > > +	}
> > > +
> > > +	usleep_range(3500, 5000);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int max9271_verify_id(struct max9271_device *dev)
> > > +{
> > > +	int ret;
> > > +
> > > +	ret = max9271_read(dev, 0x1e);
> > > +	if (ret < 0) {
> > > +		dev_err(&dev->client->dev, "MAX9271 ID read failed (%d)\n",
> > > +			ret);
> > > +		return ret;
> > > +	}
> > > +
> > > +	if (ret != MAX9271_ID) {
> > > +		dev_err(&dev->client->dev, "MAX9271 ID mismatch (0x%02x)\n",
> > > +			ret);
> > > +		return -ENXIO;
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int max9271_set_address(struct max9271_device *dev, u8 addr)
> > > +{
> > > +	int ret;
> > > +
> > > +	ret = max9271_write(dev, 0x00, addr << 1);
> > > +	if (ret < 0) {
> > > +		dev_err(&dev->client->dev,
> > > +			"MAX9271 I2C address change failed (%d)\n", ret);
> > > +		return ret;
> > > +	}
> > > +	usleep_range(3500, 5000);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +/* --- V4L2 Subdev Ops --- */
> > > +
> > > +static int max9271_s_stream(struct v4l2_subdev *sd, int enable)
> > > +{
> > > +	struct max9271_device *max9271 = sd_to_max9271(sd);
> > > +
> > > +	return max9271_set_serial_link(max9271, enable);
> > > +}
> > > +
> > > +static int max9271_enum_mbus_code(struct v4l2_subdev *sd,
> > > +				  struct v4l2_subdev_state *sd_state,
> > > +				  struct v4l2_subdev_mbus_code_enum *code)
> > > +{
> > > +	struct max9271_device *max9271 = sd_to_max9271(sd);
> > > +
> > > +	return v4l2_subdev_call(max9271->sensor, pad, enum_mbus_code, NULL,
> > > +				code);
> > > +}
> > > +
> > > +static int max9271_get_fmt(struct v4l2_subdev *sd,
> > > +			   struct v4l2_subdev_state *sd_state,
> > > +			   struct v4l2_subdev_format *format)
> > > +{
> > > +	struct max9271_device *max9271 = sd_to_max9271(sd);
> > > +
> > > +	return v4l2_subdev_call(max9271->sensor, pad, get_fmt, NULL,
> > > +				format);
> > > +}
> > > +
> > > +static int max9271_set_fmt(struct v4l2_subdev *sd,
> > > +			   struct v4l2_subdev_state *sd_state,
> > > +			   struct v4l2_subdev_format *format)
> > > +{
> > > +	struct max9271_device *max9271 = sd_to_max9271(sd);
> > > +
> > > +	return v4l2_subdev_call(max9271->sensor, pad, set_fmt, NULL,
> > > +				format);
> > > +}
> > > +
> > > +static int max9271_post_register(struct v4l2_subdev *sd)
> > > +{
> > > +	struct max9271_device *max9271 = sd_to_max9271(sd);
> > > +	int ret;
> > > +
> > > +	ret = max9271_verify_id(max9271);
> > > +	if (ret < 0)
> > > +		return ret;
> > > +
> > > +	ret = max9271_enable_gpios(max9271, MAX9271_GPIO1OUT);
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	ret = max9271_configure_gmsl_link(max9271);
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static const struct v4l2_subdev_video_ops max9271_video_ops = {
> > > +	.s_stream	= max9271_s_stream,
> > > +};
> > > +
> > > +static const struct v4l2_subdev_pad_ops max9271_subdev_pad_ops = {
> > > +	.enum_mbus_code = max9271_enum_mbus_code,
> > > +	.get_fmt	= max9271_get_fmt,
> > > +	.set_fmt	= max9271_set_fmt,
> > > +};
> > > +
> > > +static const struct v4l2_subdev_core_ops max9271_core_ops = {
> > > +	.post_register	= max9271_post_register,
> > > +};
> > > +
> > > +static const struct v4l2_subdev_ops max9271_subdev_ops = {
> > > +	.core		= &max9271_core_ops,
> > > +	.video		= &max9271_video_ops,
> > > +	.pad		= &max9271_subdev_pad_ops,
> > > +};
> > > +
> > > +/* --- V4L2 Async Notifier --- */
> > > +
> > > +static int max9271_notify_bound(struct v4l2_async_notifier *notifier,
> > > +				struct v4l2_subdev *subdev,
> > > +				struct v4l2_async_subdev *asd)
> > > +{
> > > +	struct max9271_device *max9271 = notifier_to_max9271(notifier);
> > > +	int ret, pad;
> > > +
> > > +	/*
> > > +	 * Reserve more space than necessary for controls inherited by the
> > > +	 * remote subdev.
> > > +	 */
> > > +	ret = v4l2_ctrl_handler_init(&max9271->ctrls, 16);
> > > +	if (ret < 0) {
> > > +		dev_err(max9271->dev,
> > > +			"Unable to initialize control handler: %d\n", ret);
> > > +		return ret;
> > > +	}
> > > +
> > > +	ret = v4l2_ctrl_add_handler(&max9271->ctrls, subdev->ctrl_handler,
> > > +				    NULL, true);
> > > +	if (ret < 0) {
> > > +		dev_err(max9271->dev,
> > > +			"Unable to add subdev control handler: %d\n", ret);
> > > +		goto error_free_handler;
> > > +	}
> > > +	max9271->sd.ctrl_handler = &max9271->ctrls;
> > > +
> > > +	/* Create media link with the remote sensor source pad. */
> > > +	pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
> > > +					  MEDIA_PAD_FL_SOURCE);
> > > +	if (pad < 0) {
> > > +		dev_err(max9271->dev,
> > > +			"Failed to find source pad for %s\n", subdev->name);
> > > +		ret = pad;
> > > +		goto error_free_handler;
> > > +	}
> > > +
> > > +	ret = media_create_pad_link(&subdev->entity, pad,
> > > +				    &max9271->sd.entity, MAX9271_SINK_PAD,
> > > +				    MEDIA_LNK_FL_ENABLED |
> > > +				    MEDIA_LNK_FL_IMMUTABLE);
> > > +	if (ret)
> > > +		goto error_free_handler;
> > > +
> > > +	max9271->sensor = subdev;
> > > +
> > > +	/*
> > > +	 * Hold OV10635 in reset during max9271 configuration. The reset signal
> >
> > Hold the sensor in reset ...
> >
> > But are all sensors guaranteed to be connected to the GPIO in the same way?
> >
> > Will this cause us issues? - does the GPIO need to be modelled somehow
> > to determine what's connected to them?
> >
> > > +	 * has to be asserted for at least 200 microseconds.
> > > +	 */
> > > +	ret = max9271_clear_gpios(max9271, MAX9271_GPIO1OUT);
> > > +	if (ret)
> > > +		return ret;
> > > +	usleep_range(200, 500);
> > > +
> > > +	/*
> > > +	 * Release ov10635 from reset and initialize it. The image sensor
> > > +	 * requires at least 2048 XVCLK cycles (85 micro-seconds at 24MHz)
> > > +	 * before being available. Stay safe and wait up to 500 micro-seconds.
> >
> > More sensor specific ... what needs to be abstracted here?
> 
> Yes indeed. As pointed out in the cover letter the handling of the
> sensor's reset line should go through the gpiod API, and will probably
> require installing a gpiochip in the max9271 driver.

What would be the point though ? I really think this isn't worth it.
This could would btw need to move to the sensor driver, we don't want to
encode the reset duration in the max9271 driver, and we don't want to
specify it in DT either.

> > > +	 */
> > > +	ret = max9271_set_gpios(max9271, MAX9271_GPIO1OUT);
> > > +	if (ret)
> > > +		return ret;
> > > +	usleep_range(100, 500);
> > > +
> > > +	/*
> > > +	 * Call the sensor post_register operation to complete its
> > > +	 * initialization.
> > > +	 */
> > > +	ret = v4l2_subdev_call(max9271->sensor, core, post_register);
> > > +	if (ret) {
> > > +		dev_err(max9271->dev, "Failed to initialize sensor %u\n", ret);
> > > +		goto error_remove_link;
> > > +	}
> > > +
> > > +	return 0;
> > > +
> > > +error_remove_link:
> > > +	media_entity_remove_links(&max9271->sd.entity);
> > > +	max9271->sensor = NULL;
> > > +
> > > +error_free_handler:
> > > +	v4l2_ctrl_handler_free(&max9271->ctrls);
> > > +	max9271->sd.ctrl_handler = NULL;
> > > +
> > > +	return ret;
> > > +}
> > > +
> > > +static void max9271_notify_unbind(struct v4l2_async_notifier *notifier,
> > > +				  struct v4l2_subdev *subdev,
> > > +				  struct v4l2_async_subdev *asd)
> > > +{
> > > +	struct max9271_device *max9271 = notifier_to_max9271(notifier);
> > > +
> > > +	media_entity_remove_links(&max9271->sd.entity);
> > > +	max9271->sensor = NULL;
> > > +}
> > > +
> > > +static const struct v4l2_async_notifier_operations max9271_notifier_ops = {
> > > +	.bound = max9271_notify_bound,
> > > +	.unbind = max9271_notify_unbind,
> > > +};
> > > +
> > > +static int max9271_parse_dt(struct max9271_device *max9271)
> > > +{
> > > +	struct fwnode_handle *ep, *remote;
> > > +	struct v4l2_fwnode_endpoint vep = {
> > > +		.bus_type = V4L2_MBUS_PARALLEL,
> > > +	};
> > > +	int ret;
> > > +
> > > +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(max9271->dev), 1, 0, 0);
> > > +	if (!ep) {
> > > +		dev_err(max9271->dev, "Unable to get sensor endpoint: %pOF\n",
> > > +			max9271->dev->of_node);
> > > +		return -ENOENT;
> > > +	}
> > > +
> > > +	remote = fwnode_graph_get_remote_endpoint(ep);
> > > +	if (!remote) {
> > > +		dev_err(max9271->dev, "Unable to get remote endpoint: %pOF\n",
> > > +			max9271->dev->of_node);
> > > +		return -ENOENT;
> > > +	}
> > > +
> > > +	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> > > +	fwnode_handle_put(ep);
> > > +	if (ret) {
> > > +		fwnode_handle_put(remote);
> > > +		dev_err(max9271->dev, "Unable to parse endpoint: %pOF\n",
> > > +			to_of_node(ep));
> > > +		return ret;
> > > +	}
> > > +
> > > +	v4l2_async_notifier_init(&max9271->notifier);
> > > +	max9271->asd = v4l2_async_notifier_add_fwnode_subdev(&max9271->notifier,
> > > +					      remote, struct v4l2_async_subdev);
> > > +	fwnode_handle_put(remote);
> > > +	if (IS_ERR(max9271->asd))
> > > +		return PTR_ERR(max9271->asd);
> > > +
> > > +	max9271->notifier.ops = &max9271_notifier_ops;
> > > +	max9271->notifier.flags = V4L2_ASYNC_NOTIFIER_DEFER_POST_REGISTER;
> >
> > This looks new, I'll have to read up on it ...
> 
> It is. I am pushing to get feedback on this since a few months now.
> If you wish to help:
> https://patchwork.linuxtv.org/project/linux-media/list/?series=5847
> 
> > > +	ret = v4l2_async_subdev_notifier_register(&max9271->sd,
> > > +						  &max9271->notifier);
> > > +	if (ret < 0) {
> > > +		v4l2_async_notifier_cleanup(&max9271->notifier);
> > > +		return ret;
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int max9271_init(struct max9271_device *max9271)
> > > +{
> > > +	int ret;
> > > +	u8 addr;
> > > +
> > > +	max9271_wake_up(max9271);
> >
> > This call has just set max9271->client->addr = MAX9271_DEFAULT_ADDR, so
> > the original has now been lost.
> 
> Doh! I overlooked the fact max9271_wake_up() silently overwrites the
> i2c client address. For the reasons explained in the cover letter I've
> been able to test this patch with a single camera only, so the issue
> went unnoticed here. Thanks for spotting!
> 
> > > +
> > > +	/* Re-program the chip address. */
> > > +	addr = max9271->client->addr;
> > > +	max9271->client->addr = MAX9271_DEFAULT_ADDR;
> > > +	ret = max9271_set_address(max9271, addr);
> >
> > So this is currently broken :S
> >
> > > +	if (ret < 0)
> > > +		return ret;
> > > +	max9271->client->addr = addr;
> > > +
> > > +	/* Serial link disabled during conf as it needs a valid pixel clock. */
> > > +	ret = max9271_set_serial_link(max9271, false);
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	/*
> > > +	 *  Ensure that we have a good link configuration before attempting to
> > > +	 *  identify the device.
> > > +	 */
> > > +	ret = max9271_configure_i2c(max9271, MAX9271_I2CSLVSH_469NS_234NS |
> > > +					     MAX9271_I2CSLVTO_1024US |
> > > +					     MAX9271_I2CMSTBT_105KBPS);
> >
> > Are these parameters tied to the max9286 ?
> 
> More to the I2c bus configuration and should probably be made
> configurable through the canonical i2c DTS properties.
> 
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	/*
> > > +	 * Set reverse channel high threshold to increase noise immunity.
> > > +	 *
> > > +	 * This should be compensated by increasing the reverse channel
> > > +	 * amplitude on the remote deserializer side.
> > > +	 */
> > > +	return max9271_set_high_threshold(max9271, true);
> > > +}
> > > +
> > > +static int max9271_probe(struct i2c_client *client)
> > > +{
> > > +	struct max9271_device *max9271;
> > > +	struct fwnode_handle *ep;
> > > +	int ret;
> > > +
> > > +	max9271 = devm_kzalloc(&client->dev, sizeof(*max9271), GFP_KERNEL);
> > > +	if (!max9271)
> > > +		return -ENOMEM;
> > > +	max9271->dev = &client->dev;
> > > +	max9271->client = client;
> > > +
> > > +	/* Initialize and register the subdevice. */
> > > +	v4l2_i2c_subdev_init(&max9271->sd, client, &max9271_subdev_ops);
> > > +	max9271->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > > +	max9271->pads[MAX9271_SOURCE_PAD].flags = MEDIA_PAD_FL_SOURCE;
> > > +	max9271->pads[MAX9271_SINK_PAD].flags = MEDIA_PAD_FL_SINK;
> > > +	max9271->sd.entity.flags |= MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
> >
> > Is it a formatter - do we need a new/different entity type?
> 
> I admit I had an hard time choosing the correct entity type :)
> 
> > > +	ret = media_entity_pads_init(&max9271->sd.entity, 2, max9271->pads);
> > > +	if (ret < 0)
> > > +		return ret;
> > > +
> > > +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(max9271->dev), 0, 0, 0);
> > > +	if (!ep) {
> > > +		dev_err(max9271->dev, "Unable to get endpoint 0: %pOF\n",
> > > +			max9271->dev->of_node);
> > > +		ret = -ENODEV;
> > > +		goto error_media_entity;
> > > +	}
> > > +
> > > +	max9271->sd.fwnode = ep;
> > > +	ret = v4l2_async_register_subdev(&max9271->sd);
> > > +	if (ret)
> > > +		goto error_put_node;
> > > +
> > > +	ret = max9271_parse_dt(max9271);
> > > +	if (ret)
> > > +		goto error_unregister_subdev;
> > > +
> > > +	ret = max9271_init(max9271);
> > > +	if (ret)
> > > +		goto error_unregister_subdev;
> > > +
> > > +	return 0;
> > > +
> > > +error_unregister_subdev:
> > > +	v4l2_async_unregister_subdev(&max9271->sd);
> > > +error_put_node:
> > > +	fwnode_handle_put(max9271->sd.fwnode);
> > > +error_media_entity:
> > > +	media_entity_cleanup(&max9271->sd.entity);
> > > +
> > > +	return ret;
> > > +}
> > > +
> > > +static int max9271_remove(struct i2c_client *client)
> > > +{
> > > +	struct max9271_device *max9271 = i2c_to_max9271(client);
> > > +
> > > +	v4l2_ctrl_handler_free(&max9271->ctrls);
> > > +	v4l2_async_notifier_cleanup(&max9271->notifier);
> > > +	v4l2_async_unregister_subdev(&max9271->sd);
> > > +	fwnode_handle_put(max9271->sd.fwnode);
> > > +	media_entity_cleanup(&max9271->sd.entity);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static const struct of_device_id max9271_of_ids[] = {
> > > +	{ .compatible = "imi,max9271", },
> >
> > This should be a 'maxim' prefix now, not IMI.
> >
> > > +	{ }
> > > +};
> > > +MODULE_DEVICE_TABLE(of, max9271_of_ids);
> > > +
> > > +static struct i2c_driver max9271_i2c_driver = {
> > > +	.driver	= {
> > > +		.name	= "max9271",
> > > +		.of_match_table = max9271_of_ids,
> > > +	},
> > > +	.probe_new	= max9271_probe,
> > > +	.remove		= max9271_remove,
> > > +};
> > > +
> > > +module_i2c_driver(max9271_i2c_driver);
> > > +
> > > +MODULE_DESCRIPTION("MAX9271 GMSL serializer subdevice driver");
> > > +MODULE_AUTHOR("Jacopo Mondi");
> > > +MODULE_LICENSE("GPL");
Jacopo Mondi Aug. 23, 2021, 7:21 a.m. UTC | #5
Hi Laurent,

On Mon, Aug 23, 2021 at 05:22:45AM +0300, Laurent Pinchart wrote:
> On Wed, Aug 18, 2021 at 10:27:00AM +0200, Jacopo Mondi wrote:
> > Hi Kieran, thanks for review!
> >
> > On Tue, Aug 17, 2021 at 04:49:17PM +0100, Kieran Bingham wrote:
> > > Hi Jacopo,
> > >
> > > On 17/08/2021 08:27, Jacopo Mondi wrote:
> > > > The MAX9271 is a GMSL serializer that serializes a video stream
> > > > received from an image sensor through the parallel video bus.
> > >
> > >
> > > https://datasheets.maximintegrated.com/en/ds/MAX9271.pdf calls it a
> > > "16-Bit GMSL Serializer with Coas or STP Cable Drive"
> > >
> >
> > Nice we have a public datasheet now!
> > Nice, well, it might mean GMSL is just old ?
> >
> > >
> > > > The serializer it's usually found embedded with an image sensor and
> > >
> > > s/it's/is/
> > >
> > > > other ancillary chips in camera modules like RDACM20 and RDACM21.
> > > >
> > > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > > > ---
> > > >  MAINTAINERS                 |   9 +
> > > >  drivers/media/i2c/Kconfig   |  12 +
> > > >  drivers/media/i2c/Makefile  |   1 +
> > > >  drivers/media/i2c/max9271.c | 756 ++++++++++++++++++++++++++++++++++++
> > > >  4 files changed, 778 insertions(+)
> > > >  create mode 100644 drivers/media/i2c/max9271.c
> > > >
> > > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > > index 7ad89cac19b7..2dab25a08c9c 100644
> > > > --- a/MAINTAINERS
> > > > +++ b/MAINTAINERS
> > > > @@ -11244,6 +11244,15 @@ F:	Documentation/hwmon/max6697.rst
> > > >  F:	drivers/hwmon/max6697.c
> > > >  F:	include/linux/platform_data/max6697.h
> > > >
> > > > +MAX9271 GMSL SERIALIZER DRIVER
> > > > +M:	Jacopo Mondi <jacopo+renesas@jmondi.org>
> > > > +M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> > > > +M:	Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > > > +M:	Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > > > +L:	linux-media@vger.kernel.org
> > > > +S:	Maintained
> > > > +F:	drivers/media/i2c/max9271.c
> > > > +
> > > >  MAX9286 QUAD GMSL DESERIALIZER DRIVER
> > > >  M:	Jacopo Mondi <jacopo+renesas@jmondi.org>
> > > >  M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> > > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > > > index 08feb3e8c1bf..b793d1f322d9 100644
> > > > --- a/drivers/media/i2c/Kconfig
> > > > +++ b/drivers/media/i2c/Kconfig
> > > > @@ -1300,6 +1300,18 @@ source "drivers/media/i2c/m5mols/Kconfig"
> > > >  config VIDEO_MAX9271_LIB
> > > >  	tristate
> > > >
> > > > +config VIDEO_MAX9271
> > > > +	tristate "MAX9271 GMSL serializer support"
> > > > +	depends on I2C
> > > > +	select V4L2_FWNODE
> > > > +	select VIDEO_V4L2_SUBDEV_API
> > > > +	select MEDIA_CONTROLLER
> > > > +	help
> > > > +	  This driver supports the Maxim MAX9271 GMSL serializer.
> > > > +
> > > > +	  To compile this driver as a module, choose M here: the
> > > > +	  module will be called max9271.
> > > > +
> > > >  config VIDEO_RDACM20
> > > >  	tristate "IMI RDACM20 camera support"
> > > >  	depends on I2C
> > > > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > > > index 4d879373bd48..37bb51065574 100644
> > > > --- a/drivers/media/i2c/Makefile
> > > > +++ b/drivers/media/i2c/Makefile
> > > > @@ -130,6 +130,7 @@ obj-$(CONFIG_VIDEO_IMX355)	+= imx355.o
> > > >  obj-$(CONFIG_VIDEO_IMX412)	+= imx412.o
> > > >  obj-$(CONFIG_VIDEO_MAX9286)	+= max9286.o
> > > >  obj-$(CONFIG_VIDEO_MAX9271_LIB)	+= max9271-lib.o
> > > > +obj-$(CONFIG_VIDEO_MAX9271)	+= max9271.o
> > > >  obj-$(CONFIG_VIDEO_RDACM20)	+= rdacm20.o
> > > >  obj-$(CONFIG_VIDEO_RDACM21)	+= rdacm21.o
> > > >  obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
> > > > diff --git a/drivers/media/i2c/max9271.c b/drivers/media/i2c/max9271.c
> > > > new file mode 100644
> > > > index 000000000000..64987cba3d3e
> > > > --- /dev/null
> > > > +++ b/drivers/media/i2c/max9271.c
> > > > @@ -0,0 +1,756 @@
> > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > +/*
> > > > + * Copyright (C) 2017-2021 Jacopo Mondi
> > > > + * Copyright (C) 2017-2020 Kieran Bingham
> > > > + * Copyright (C) 2017-2019 Laurent Pinchart
> > > > + * Copyright (C) 2017-2019 Niklas Söderlund
> > > > + * Copyright (C) 2016 Renesas Electronics Corporation
> > > > + * Copyright (C) 2015 Cogent Embedded, Inc.
> > > > + */
> > > > +
> > > > +#include <linux/delay.h>
> > > > +#include <linux/fwnode.h>
> > > > +#include <linux/init.h>
> > > > +#include <linux/i2c.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/property.h>
> > > > +
> > > > +#include <media/v4l2-async.h>
> > > > +#include <media/v4l2-ctrls.h>
> > > > +#include <media/v4l2-fwnode.h>
> > > > +#include <media/v4l2-subdev.h>
> > > > +
> > > > +#define MAX9271_DEFAULT_ADDR	0x40
> > > > +
> > > > +/* Register 0x02 */
> > > > +#define MAX9271_SPREAD_SPECT_0		(0 << 5)
> > > > +#define MAX9271_SPREAD_SPECT_05		(1 << 5)
> > > > +#define MAX9271_SPREAD_SPECT_15		(2 << 5)
> > > > +#define MAX9271_SPREAD_SPECT_1		(5 << 5)
> > > > +#define MAX9271_SPREAD_SPECT_2		(3 << 5)
> > > > +#define MAX9271_SPREAD_SPECT_3		(6 << 5)
> > > > +#define MAX9271_SPREAD_SPECT_4		(7 << 5)
> > > > +#define MAX9271_R02_RES			BIT(4)
> > > > +#define MAX9271_PCLK_AUTODETECT		(3 << 2)
> > > > +#define MAX9271_SERIAL_AUTODETECT	(0x03)
> > > > +/* Register 0x04 */
> > > > +#define MAX9271_SEREN			BIT(7)
> > > > +#define MAX9271_CLINKEN			BIT(6)
> > > > +#define MAX9271_PRBSEN			BIT(5)
> > > > +#define MAX9271_SLEEP			BIT(4)
> > > > +#define MAX9271_INTTYPE_I2C		(0 << 2)
> > > > +#define MAX9271_INTTYPE_UART		(1 << 2)
> > > > +#define MAX9271_INTTYPE_NONE		(2 << 2)
> > > > +#define MAX9271_REVCCEN			BIT(1)
> > > > +#define MAX9271_FWDCCEN			BIT(0)
> > > > +/* Register 0x07 */
> > > > +#define MAX9271_DBL			BIT(7)
> > > > +#define MAX9271_DRS			BIT(6)
> > > > +#define MAX9271_BWS			BIT(5)
> > > > +#define MAX9271_ES			BIT(4)
> > > > +#define MAX9271_HVEN			BIT(2)
> > > > +#define MAX9271_EDC_1BIT_PARITY		(0 << 0)
> > > > +#define MAX9271_EDC_6BIT_CRC		(1 << 0)
> > > > +#define MAX9271_EDC_6BIT_HAMMING	(2 << 0)
> > > > +/* Register 0x08 */
> > > > +#define MAX9271_INVVS			BIT(7)
> > > > +#define MAX9271_INVHS			BIT(6)
> > > > +#define MAX9271_REV_LOGAIN		BIT(3)
> > > > +#define MAX9271_REV_HIVTH		BIT(0)
> > > > +/* Register 0x09 */
> > > > +#define MAX9271_ID			0x09
> > > > +/* Register 0x0d */
> > > > +#define MAX9271_I2CLOCACK		BIT(7)
> > > > +#define MAX9271_I2CSLVSH_1046NS_469NS	(3 << 5)
> > > > +#define MAX9271_I2CSLVSH_938NS_352NS	(2 << 5)
> > > > +#define MAX9271_I2CSLVSH_469NS_234NS	(1 << 5)
> > > > +#define MAX9271_I2CSLVSH_352NS_117NS	(0 << 5)
> > > > +#define MAX9271_I2CMSTBT_837KBPS	(7 << 2)
> > > > +#define MAX9271_I2CMSTBT_533KBPS	(6 << 2)
> > > > +#define MAX9271_I2CMSTBT_339KBPS	(5 << 2)
> > > > +#define MAX9271_I2CMSTBT_173KBPS	(4 << 2)
> > > > +#define MAX9271_I2CMSTBT_105KBPS	(3 << 2)
> > > > +#define MAX9271_I2CMSTBT_84KBPS		(2 << 2)
> > > > +#define MAX9271_I2CMSTBT_28KBPS		(1 << 2)
> > > > +#define MAX9271_I2CMSTBT_8KBPS		(0 << 2)
> > > > +#define MAX9271_I2CSLVTO_NONE		(3 << 0)
> > > > +#define MAX9271_I2CSLVTO_1024US		(2 << 0)
> > > > +#define MAX9271_I2CSLVTO_256US		(1 << 0)
> > > > +#define MAX9271_I2CSLVTO_64US		(0 << 0)
> > > > +/* Register 0x0f */
> > > > +#define MAX9271_GPIO5OUT		BIT(5)
> > > > +#define MAX9271_GPIO4OUT		BIT(4)
> > > > +#define MAX9271_GPIO3OUT		BIT(3)
> > > > +#define MAX9271_GPIO2OUT		BIT(2)
> > > > +#define MAX9271_GPIO1OUT		BIT(1)
> > > > +#define MAX9271_GPO			BIT(0)
> > > > +/* Register 0x15 */
> > > > +#define MAX9271_PCLKDET			BIT(0)
> > > > +
> > > > +struct max9271_device {
> > > > +	struct device			*dev;
> > > > +	struct i2c_client		*client;
> > > > +	struct v4l2_subdev		sd;
> > > > +#define MAX9271_SOURCE_PAD	0
> > > > +#define MAX9271_SINK_PAD	1
> > > > +	struct media_pad		pads[2];
> > > > +	struct v4l2_async_notifier	notifier;
> > > > +	struct v4l2_async_subdev	*asd;
> > > > +	struct v4l2_ctrl_handler	ctrls;
> > > > +	struct v4l2_subdev		*sensor;
> > > > +};
> > > > +
> > > > +static inline struct max9271_device *sd_to_max9271(struct v4l2_subdev *sd)
> > > > +{
> > > > +	return container_of(sd, struct max9271_device, sd);
> > > > +}
> > > > +
> > > > +static inline struct max9271_device *i2c_to_max9271(struct i2c_client *client)
> > > > +{
> > > > +	return sd_to_max9271(i2c_get_clientdata(client));
> > > > +}
> > > > +
> > > > +static inline struct max9271_device *notifier_to_max9271(
> > > > +						struct v4l2_async_notifier *nf)
> > > > +{
> > > > +	return container_of(nf, struct max9271_device, notifier);
> > > > +}
> > > > +
> > > > +/* --- MAX9271 hardware operations --- */
> > > > +
> > > > +static int max9271_read(struct max9271_device *dev, u8 reg)
> > > > +{
> > > > +	int ret;
> > > > +
> > > > +	dev_dbg(&dev->client->dev, "%s(0x%02x)\n", __func__, reg);
> > > > +
> > > > +	ret = i2c_smbus_read_byte_data(dev->client, reg);
> > > > +	if (ret < 0)
> > > > +		dev_dbg(&dev->client->dev,
> > > > +			"%s: register 0x%02x read failed (%d)\n",
> > > > +			__func__, reg, ret);
> > > > +
> > > > +	return ret;
> > > > +}
> > > > +
> > > > +static int max9271_write(struct max9271_device *dev, u8 reg, u8 val)
> > > > +{
> > > > +	int ret;
> > > > +
> > > > +	dev_dbg(&dev->client->dev, "%s(0x%02x, 0x%02x)\n", __func__, reg, val);
> > > > +
> > > > +	ret = i2c_smbus_write_byte_data(dev->client, reg, val);
> > > > +	if (ret < 0)
> > > > +		dev_err(&dev->client->dev,
> > > > +			"%s: register 0x%02x write failed (%d)\n",
> > > > +			__func__, reg, ret);
> > > > +
> > > > +	return ret;
> > > > +}
> > > > +
> > > > +/*
> > > > + * max9271_pclk_detect() - Detect valid pixel clock from image sensor
> > > > + *
> > > > + * Wait up to 10ms for a valid pixel clock.
> > > > + *
> > > > + * Returns 0 for success, < 0 for pixel clock not properly detected
> > > > + */
> > > > +static int max9271_pclk_detect(struct max9271_device *dev)
> > > > +{
> > > > +	unsigned int i;
> > > > +	int ret;
> > > > +
> > > > +	for (i = 0; i < 100; i++) {
> > > > +		ret = max9271_read(dev, 0x15);
> > > > +		if (ret < 0)
> > > > +			return ret;
> > > > +
> > > > +		if (ret & MAX9271_PCLKDET)
> > > > +			return 0;
> > > > +
> > > > +		usleep_range(50, 100);
> > > > +	}
> > > > +
> > > > +	dev_err(&dev->client->dev, "Unable to detect valid pixel clock\n");
> > > > +
> > > > +	return -EIO;
> > > > +}
> > > > +
> > > > +static void max9271_wake_up(struct max9271_device *dev)
> > > > +{
> > > > +	/*
> > > > +	 * Use the chip default address as this function has to be called
> > > > +	 * before any other one.
> > > > +	 */
> > > > +	dev->client->addr = MAX9271_DEFAULT_ADDR;
> > > > +	i2c_smbus_read_byte(dev->client);
> > > > +	usleep_range(5000, 8000);
> > > > +}
> > > > +
> > > > +static int max9271_set_serial_link(struct max9271_device *dev, bool enable)
> > > > +{
> > > > +	int ret;
> > > > +	u8 val = MAX9271_REVCCEN | MAX9271_FWDCCEN;
> > > > +
> > > > +	if (enable) {
> > > > +		ret = max9271_pclk_detect(dev);
> > > > +		if (ret)
> > > > +			return ret;
> > > > +
> > > > +		val |= MAX9271_SEREN;
> > > > +	} else {
> > > > +		val |= MAX9271_CLINKEN;
> > > > +	}
> > > > +
> > > > +	/*
> > > > +	 * The serializer temporarily disables the reverse control channel for
> > > > +	 * 350µs after starting/stopping the forward serial link, but the
> > > > +	 * deserializer synchronization time isn't clearly documented.
> > > > +	 *
> > > > +	 * According to the serializer datasheet we should wait 3ms, while
> > > > +	 * according to the deserializer datasheet we should wait 5ms.
> > > > +	 *
> > > > +	 * Short delays here appear to show bit-errors in the writes following.
> > > > +	 * Therefore a conservative delay seems best here.
> > > > +	 */
> > > > +	ret = max9271_write(dev, 0x04, val);
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +
> > > > +	usleep_range(5000, 8000);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int max9271_configure_i2c(struct max9271_device *dev, u8 i2c_config)
> > > > +{
> > > > +	int ret;
> > > > +
> > > > +	ret = max9271_write(dev, 0x0d, i2c_config);
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +
> > > > +	/* The delay required after an I2C bus configuration change is not
> > >
> > > /*
> > >  * The delay ... ?
> > >
> >
> > Ah, ups
> >
> > >
> > >
> > > > +	 * characterized in the serializer manual. Sleep up to 5msec to
> > > > +	 * stay safe.
> > > > +	 */
> > > > +	usleep_range(3500, 5000);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int max9271_set_high_threshold(struct max9271_device *dev, bool enable)
> > > > +{
> > > > +	int ret;
> > > > +
> > > > +	ret = max9271_read(dev, 0x08);
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +
> > > > +	/*
> > > > +	 * Enable or disable reverse channel high threshold to increase
> > > > +	 * immunity to power supply noise.
> > > > +	 */
> > > > +	ret = max9271_write(dev, 0x08, enable ? ret | BIT(0) : ret & ~BIT(0));
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +
> > > > +	usleep_range(2000, 2500);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int max9271_configure_gmsl_link(struct max9271_device *dev)
> > > > +{
> > > > +	int ret;
> > > > +
> > > > +	/*
> > > > +	 * Configure the GMSL link:
> > > > +	 *
> > > > +	 * - Double input mode, high data rate, 24-bit mode
> > > > +	 * - Latch input data on PCLKIN rising edge
> > > > +	 * - Enable HS/VS encoding
> > > > +	 * - 1-bit parity error detection
> > > > +	 *
> > > > +	 * TODO: Make the GMSL link configuration parametric.
> > > > +	 */
> > > > +	ret = max9271_write(dev, 0x07, MAX9271_DBL | MAX9271_HVEN |
> > > > +			    MAX9271_EDC_1BIT_PARITY);
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +
> > > > +	usleep_range(5000, 8000);
> > > > +
> > > > +	/*
> > > > +	 * Adjust spread spectrum to +4% and auto-detect pixel clock
> > > > +	 * and serial link rate.
> > > > +	 */
> > > > +	ret = max9271_write(dev, 0x02,
> > > > +			    MAX9271_SPREAD_SPECT_4 | MAX9271_R02_RES |
> > > > +			    MAX9271_PCLK_AUTODETECT |
> > > > +			    MAX9271_SERIAL_AUTODETECT);
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +
> > > > +	usleep_range(5000, 8000);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int max9271_set_gpios(struct max9271_device *dev, u8 gpio_mask)
> > > > +{
> > > > +	int ret;
> > > > +
> > > > +	ret = max9271_read(dev, 0x0f);
> > >
> > > What is 0x0f?
> > >
> > > Ah - the registers are unnamed...
> > >
> > > Seems a shame..
> >
> > It is a bit. If the overall approach is validated, I'll go and
> > beautify the driver.
> >
> > >
> > >
> > > > +	if (ret < 0)
> > > > +		return 0;
> > > > +
> > > > +	ret |= gpio_mask;
> > > > +	ret = max9271_write(dev, 0x0f, ret);
> > > > +	if (ret < 0) {
> > > > +		dev_err(&dev->client->dev, "Failed to set gpio (%d)\n", ret);
> > > > +		return ret;
> > > > +	}
> > > > +
> > > > +	usleep_range(3500, 5000);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int max9271_clear_gpios(struct max9271_device *dev, u8 gpio_mask)
> > > > +{
> > > > +	int ret;
> > > > +
> > > > +	ret = max9271_read(dev, 0x0f);
> > > > +	if (ret < 0)
> > > > +		return 0;
> > > > +
> > > > +	ret &= ~gpio_mask;
> > > > +	ret = max9271_write(dev, 0x0f, ret);
> > > > +	if (ret < 0) {
> > > > +		dev_err(&dev->client->dev, "Failed to clear gpio (%d)\n", ret);
> > > > +		return ret;
> > > > +	}
> > > > +
> > > > +	usleep_range(3500, 5000);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int max9271_enable_gpios(struct max9271_device *dev, u8 gpio_mask)
> > > > +{
> > > > +	int ret;
> > > > +
> > > > +	ret = max9271_read(dev, 0x0e);
> > > > +	if (ret < 0)
> > > > +		return 0;
> > > > +
> > > > +	/* BIT(0) reserved: GPO is always enabled. */
> > > > +	ret |= (gpio_mask & ~BIT(0));
> > > > +	ret = max9271_write(dev, 0x0e, ret);
> > > > +	if (ret < 0) {
> > > > +		dev_err(&dev->client->dev, "Failed to enable gpio (%d)\n", ret);
> > > > +		return ret;
> > > > +	}
> > > > +
> > > > +	usleep_range(3500, 5000);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int max9271_verify_id(struct max9271_device *dev)
> > > > +{
> > > > +	int ret;
> > > > +
> > > > +	ret = max9271_read(dev, 0x1e);
> > > > +	if (ret < 0) {
> > > > +		dev_err(&dev->client->dev, "MAX9271 ID read failed (%d)\n",
> > > > +			ret);
> > > > +		return ret;
> > > > +	}
> > > > +
> > > > +	if (ret != MAX9271_ID) {
> > > > +		dev_err(&dev->client->dev, "MAX9271 ID mismatch (0x%02x)\n",
> > > > +			ret);
> > > > +		return -ENXIO;
> > > > +	}
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int max9271_set_address(struct max9271_device *dev, u8 addr)
> > > > +{
> > > > +	int ret;
> > > > +
> > > > +	ret = max9271_write(dev, 0x00, addr << 1);
> > > > +	if (ret < 0) {
> > > > +		dev_err(&dev->client->dev,
> > > > +			"MAX9271 I2C address change failed (%d)\n", ret);
> > > > +		return ret;
> > > > +	}
> > > > +	usleep_range(3500, 5000);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +/* --- V4L2 Subdev Ops --- */
> > > > +
> > > > +static int max9271_s_stream(struct v4l2_subdev *sd, int enable)
> > > > +{
> > > > +	struct max9271_device *max9271 = sd_to_max9271(sd);
> > > > +
> > > > +	return max9271_set_serial_link(max9271, enable);
> > > > +}
> > > > +
> > > > +static int max9271_enum_mbus_code(struct v4l2_subdev *sd,
> > > > +				  struct v4l2_subdev_state *sd_state,
> > > > +				  struct v4l2_subdev_mbus_code_enum *code)
> > > > +{
> > > > +	struct max9271_device *max9271 = sd_to_max9271(sd);
> > > > +
> > > > +	return v4l2_subdev_call(max9271->sensor, pad, enum_mbus_code, NULL,
> > > > +				code);
> > > > +}
> > > > +
> > > > +static int max9271_get_fmt(struct v4l2_subdev *sd,
> > > > +			   struct v4l2_subdev_state *sd_state,
> > > > +			   struct v4l2_subdev_format *format)
> > > > +{
> > > > +	struct max9271_device *max9271 = sd_to_max9271(sd);
> > > > +
> > > > +	return v4l2_subdev_call(max9271->sensor, pad, get_fmt, NULL,
> > > > +				format);
> > > > +}
> > > > +
> > > > +static int max9271_set_fmt(struct v4l2_subdev *sd,
> > > > +			   struct v4l2_subdev_state *sd_state,
> > > > +			   struct v4l2_subdev_format *format)
> > > > +{
> > > > +	struct max9271_device *max9271 = sd_to_max9271(sd);
> > > > +
> > > > +	return v4l2_subdev_call(max9271->sensor, pad, set_fmt, NULL,
> > > > +				format);
> > > > +}
> > > > +
> > > > +static int max9271_post_register(struct v4l2_subdev *sd)
> > > > +{
> > > > +	struct max9271_device *max9271 = sd_to_max9271(sd);
> > > > +	int ret;
> > > > +
> > > > +	ret = max9271_verify_id(max9271);
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +
> > > > +	ret = max9271_enable_gpios(max9271, MAX9271_GPIO1OUT);
> > > > +	if (ret)
> > > > +		return ret;
> > > > +
> > > > +	ret = max9271_configure_gmsl_link(max9271);
> > > > +	if (ret)
> > > > +		return ret;
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static const struct v4l2_subdev_video_ops max9271_video_ops = {
> > > > +	.s_stream	= max9271_s_stream,
> > > > +};
> > > > +
> > > > +static const struct v4l2_subdev_pad_ops max9271_subdev_pad_ops = {
> > > > +	.enum_mbus_code = max9271_enum_mbus_code,
> > > > +	.get_fmt	= max9271_get_fmt,
> > > > +	.set_fmt	= max9271_set_fmt,
> > > > +};
> > > > +
> > > > +static const struct v4l2_subdev_core_ops max9271_core_ops = {
> > > > +	.post_register	= max9271_post_register,
> > > > +};
> > > > +
> > > > +static const struct v4l2_subdev_ops max9271_subdev_ops = {
> > > > +	.core		= &max9271_core_ops,
> > > > +	.video		= &max9271_video_ops,
> > > > +	.pad		= &max9271_subdev_pad_ops,
> > > > +};
> > > > +
> > > > +/* --- V4L2 Async Notifier --- */
> > > > +
> > > > +static int max9271_notify_bound(struct v4l2_async_notifier *notifier,
> > > > +				struct v4l2_subdev *subdev,
> > > > +				struct v4l2_async_subdev *asd)
> > > > +{
> > > > +	struct max9271_device *max9271 = notifier_to_max9271(notifier);
> > > > +	int ret, pad;
> > > > +
> > > > +	/*
> > > > +	 * Reserve more space than necessary for controls inherited by the
> > > > +	 * remote subdev.
> > > > +	 */
> > > > +	ret = v4l2_ctrl_handler_init(&max9271->ctrls, 16);
> > > > +	if (ret < 0) {
> > > > +		dev_err(max9271->dev,
> > > > +			"Unable to initialize control handler: %d\n", ret);
> > > > +		return ret;
> > > > +	}
> > > > +
> > > > +	ret = v4l2_ctrl_add_handler(&max9271->ctrls, subdev->ctrl_handler,
> > > > +				    NULL, true);
> > > > +	if (ret < 0) {
> > > > +		dev_err(max9271->dev,
> > > > +			"Unable to add subdev control handler: %d\n", ret);
> > > > +		goto error_free_handler;
> > > > +	}
> > > > +	max9271->sd.ctrl_handler = &max9271->ctrls;
> > > > +
> > > > +	/* Create media link with the remote sensor source pad. */
> > > > +	pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
> > > > +					  MEDIA_PAD_FL_SOURCE);
> > > > +	if (pad < 0) {
> > > > +		dev_err(max9271->dev,
> > > > +			"Failed to find source pad for %s\n", subdev->name);
> > > > +		ret = pad;
> > > > +		goto error_free_handler;
> > > > +	}
> > > > +
> > > > +	ret = media_create_pad_link(&subdev->entity, pad,
> > > > +				    &max9271->sd.entity, MAX9271_SINK_PAD,
> > > > +				    MEDIA_LNK_FL_ENABLED |
> > > > +				    MEDIA_LNK_FL_IMMUTABLE);
> > > > +	if (ret)
> > > > +		goto error_free_handler;
> > > > +
> > > > +	max9271->sensor = subdev;
> > > > +
> > > > +	/*
> > > > +	 * Hold OV10635 in reset during max9271 configuration. The reset signal
> > >
> > > Hold the sensor in reset ...
> > >
> > > But are all sensors guaranteed to be connected to the GPIO in the same way?
> > >
> > > Will this cause us issues? - does the GPIO need to be modelled somehow
> > > to determine what's connected to them?
> > >
> > > > +	 * has to be asserted for at least 200 microseconds.
> > > > +	 */
> > > > +	ret = max9271_clear_gpios(max9271, MAX9271_GPIO1OUT);
> > > > +	if (ret)
> > > > +		return ret;
> > > > +	usleep_range(200, 500);
> > > > +
> > > > +	/*
> > > > +	 * Release ov10635 from reset and initialize it. The image sensor
> > > > +	 * requires at least 2048 XVCLK cycles (85 micro-seconds at 24MHz)
> > > > +	 * before being available. Stay safe and wait up to 500 micro-seconds.
> > >
> > > More sensor specific ... what needs to be abstracted here?
> >
> > Yes indeed. As pointed out in the cover letter the handling of the
> > sensor's reset line should go through the gpiod API, and will probably
> > require installing a gpiochip in the max9271 driver.
>
> What would be the point though ? I really think this isn't worth it.

That I might agree

> This could would btw need to move to the sensor driver, we don't want to
> encode the reset duration in the max9271 driver, and we don't want to
> specify it in DT either.

Installing a gpio-controller on the max9271 and having the sensor
driver handling its reset is what I was suggesting.

Thanks
   j

>
> > > > +	 */
> > > > +	ret = max9271_set_gpios(max9271, MAX9271_GPIO1OUT);
> > > > +	if (ret)
> > > > +		return ret;
> > > > +	usleep_range(100, 500);
> > > > +
> > > > +	/*
> > > > +	 * Call the sensor post_register operation to complete its
> > > > +	 * initialization.
> > > > +	 */
> > > > +	ret = v4l2_subdev_call(max9271->sensor, core, post_register);
> > > > +	if (ret) {
> > > > +		dev_err(max9271->dev, "Failed to initialize sensor %u\n", ret);
> > > > +		goto error_remove_link;
> > > > +	}
> > > > +
> > > > +	return 0;
> > > > +
> > > > +error_remove_link:
> > > > +	media_entity_remove_links(&max9271->sd.entity);
> > > > +	max9271->sensor = NULL;
> > > > +
> > > > +error_free_handler:
> > > > +	v4l2_ctrl_handler_free(&max9271->ctrls);
> > > > +	max9271->sd.ctrl_handler = NULL;
> > > > +
> > > > +	return ret;
> > > > +}
> > > > +
> > > > +static void max9271_notify_unbind(struct v4l2_async_notifier *notifier,
> > > > +				  struct v4l2_subdev *subdev,
> > > > +				  struct v4l2_async_subdev *asd)
> > > > +{
> > > > +	struct max9271_device *max9271 = notifier_to_max9271(notifier);
> > > > +
> > > > +	media_entity_remove_links(&max9271->sd.entity);
> > > > +	max9271->sensor = NULL;
> > > > +}
> > > > +
> > > > +static const struct v4l2_async_notifier_operations max9271_notifier_ops = {
> > > > +	.bound = max9271_notify_bound,
> > > > +	.unbind = max9271_notify_unbind,
> > > > +};
> > > > +
> > > > +static int max9271_parse_dt(struct max9271_device *max9271)
> > > > +{
> > > > +	struct fwnode_handle *ep, *remote;
> > > > +	struct v4l2_fwnode_endpoint vep = {
> > > > +		.bus_type = V4L2_MBUS_PARALLEL,
> > > > +	};
> > > > +	int ret;
> > > > +
> > > > +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(max9271->dev), 1, 0, 0);
> > > > +	if (!ep) {
> > > > +		dev_err(max9271->dev, "Unable to get sensor endpoint: %pOF\n",
> > > > +			max9271->dev->of_node);
> > > > +		return -ENOENT;
> > > > +	}
> > > > +
> > > > +	remote = fwnode_graph_get_remote_endpoint(ep);
> > > > +	if (!remote) {
> > > > +		dev_err(max9271->dev, "Unable to get remote endpoint: %pOF\n",
> > > > +			max9271->dev->of_node);
> > > > +		return -ENOENT;
> > > > +	}
> > > > +
> > > > +	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> > > > +	fwnode_handle_put(ep);
> > > > +	if (ret) {
> > > > +		fwnode_handle_put(remote);
> > > > +		dev_err(max9271->dev, "Unable to parse endpoint: %pOF\n",
> > > > +			to_of_node(ep));
> > > > +		return ret;
> > > > +	}
> > > > +
> > > > +	v4l2_async_notifier_init(&max9271->notifier);
> > > > +	max9271->asd = v4l2_async_notifier_add_fwnode_subdev(&max9271->notifier,
> > > > +					      remote, struct v4l2_async_subdev);
> > > > +	fwnode_handle_put(remote);
> > > > +	if (IS_ERR(max9271->asd))
> > > > +		return PTR_ERR(max9271->asd);
> > > > +
> > > > +	max9271->notifier.ops = &max9271_notifier_ops;
> > > > +	max9271->notifier.flags = V4L2_ASYNC_NOTIFIER_DEFER_POST_REGISTER;
> > >
> > > This looks new, I'll have to read up on it ...
> >
> > It is. I am pushing to get feedback on this since a few months now.
> > If you wish to help:
> > https://patchwork.linuxtv.org/project/linux-media/list/?series=5847
> >
> > > > +	ret = v4l2_async_subdev_notifier_register(&max9271->sd,
> > > > +						  &max9271->notifier);
> > > > +	if (ret < 0) {
> > > > +		v4l2_async_notifier_cleanup(&max9271->notifier);
> > > > +		return ret;
> > > > +	}
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int max9271_init(struct max9271_device *max9271)
> > > > +{
> > > > +	int ret;
> > > > +	u8 addr;
> > > > +
> > > > +	max9271_wake_up(max9271);
> > >
> > > This call has just set max9271->client->addr = MAX9271_DEFAULT_ADDR, so
> > > the original has now been lost.
> >
> > Doh! I overlooked the fact max9271_wake_up() silently overwrites the
> > i2c client address. For the reasons explained in the cover letter I've
> > been able to test this patch with a single camera only, so the issue
> > went unnoticed here. Thanks for spotting!
> >
> > > > +
> > > > +	/* Re-program the chip address. */
> > > > +	addr = max9271->client->addr;
> > > > +	max9271->client->addr = MAX9271_DEFAULT_ADDR;
> > > > +	ret = max9271_set_address(max9271, addr);
> > >
> > > So this is currently broken :S
> > >
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +	max9271->client->addr = addr;
> > > > +
> > > > +	/* Serial link disabled during conf as it needs a valid pixel clock. */
> > > > +	ret = max9271_set_serial_link(max9271, false);
> > > > +	if (ret)
> > > > +		return ret;
> > > > +
> > > > +	/*
> > > > +	 *  Ensure that we have a good link configuration before attempting to
> > > > +	 *  identify the device.
> > > > +	 */
> > > > +	ret = max9271_configure_i2c(max9271, MAX9271_I2CSLVSH_469NS_234NS |
> > > > +					     MAX9271_I2CSLVTO_1024US |
> > > > +					     MAX9271_I2CMSTBT_105KBPS);
> > >
> > > Are these parameters tied to the max9286 ?
> >
> > More to the I2c bus configuration and should probably be made
> > configurable through the canonical i2c DTS properties.
> >
> > > > +	if (ret)
> > > > +		return ret;
> > > > +
> > > > +	/*
> > > > +	 * Set reverse channel high threshold to increase noise immunity.
> > > > +	 *
> > > > +	 * This should be compensated by increasing the reverse channel
> > > > +	 * amplitude on the remote deserializer side.
> > > > +	 */
> > > > +	return max9271_set_high_threshold(max9271, true);
> > > > +}
> > > > +
> > > > +static int max9271_probe(struct i2c_client *client)
> > > > +{
> > > > +	struct max9271_device *max9271;
> > > > +	struct fwnode_handle *ep;
> > > > +	int ret;
> > > > +
> > > > +	max9271 = devm_kzalloc(&client->dev, sizeof(*max9271), GFP_KERNEL);
> > > > +	if (!max9271)
> > > > +		return -ENOMEM;
> > > > +	max9271->dev = &client->dev;
> > > > +	max9271->client = client;
> > > > +
> > > > +	/* Initialize and register the subdevice. */
> > > > +	v4l2_i2c_subdev_init(&max9271->sd, client, &max9271_subdev_ops);
> > > > +	max9271->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > > > +	max9271->pads[MAX9271_SOURCE_PAD].flags = MEDIA_PAD_FL_SOURCE;
> > > > +	max9271->pads[MAX9271_SINK_PAD].flags = MEDIA_PAD_FL_SINK;
> > > > +	max9271->sd.entity.flags |= MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
> > >
> > > Is it a formatter - do we need a new/different entity type?
> >
> > I admit I had an hard time choosing the correct entity type :)
> >
> > > > +	ret = media_entity_pads_init(&max9271->sd.entity, 2, max9271->pads);
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +
> > > > +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(max9271->dev), 0, 0, 0);
> > > > +	if (!ep) {
> > > > +		dev_err(max9271->dev, "Unable to get endpoint 0: %pOF\n",
> > > > +			max9271->dev->of_node);
> > > > +		ret = -ENODEV;
> > > > +		goto error_media_entity;
> > > > +	}
> > > > +
> > > > +	max9271->sd.fwnode = ep;
> > > > +	ret = v4l2_async_register_subdev(&max9271->sd);
> > > > +	if (ret)
> > > > +		goto error_put_node;
> > > > +
> > > > +	ret = max9271_parse_dt(max9271);
> > > > +	if (ret)
> > > > +		goto error_unregister_subdev;
> > > > +
> > > > +	ret = max9271_init(max9271);
> > > > +	if (ret)
> > > > +		goto error_unregister_subdev;
> > > > +
> > > > +	return 0;
> > > > +
> > > > +error_unregister_subdev:
> > > > +	v4l2_async_unregister_subdev(&max9271->sd);
> > > > +error_put_node:
> > > > +	fwnode_handle_put(max9271->sd.fwnode);
> > > > +error_media_entity:
> > > > +	media_entity_cleanup(&max9271->sd.entity);
> > > > +
> > > > +	return ret;
> > > > +}
> > > > +
> > > > +static int max9271_remove(struct i2c_client *client)
> > > > +{
> > > > +	struct max9271_device *max9271 = i2c_to_max9271(client);
> > > > +
> > > > +	v4l2_ctrl_handler_free(&max9271->ctrls);
> > > > +	v4l2_async_notifier_cleanup(&max9271->notifier);
> > > > +	v4l2_async_unregister_subdev(&max9271->sd);
> > > > +	fwnode_handle_put(max9271->sd.fwnode);
> > > > +	media_entity_cleanup(&max9271->sd.entity);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static const struct of_device_id max9271_of_ids[] = {
> > > > +	{ .compatible = "imi,max9271", },
> > >
> > > This should be a 'maxim' prefix now, not IMI.
> > >
> > > > +	{ }
> > > > +};
> > > > +MODULE_DEVICE_TABLE(of, max9271_of_ids);
> > > > +
> > > > +static struct i2c_driver max9271_i2c_driver = {
> > > > +	.driver	= {
> > > > +		.name	= "max9271",
> > > > +		.of_match_table = max9271_of_ids,
> > > > +	},
> > > > +	.probe_new	= max9271_probe,
> > > > +	.remove		= max9271_remove,
> > > > +};
> > > > +
> > > > +module_i2c_driver(max9271_i2c_driver);
> > > > +
> > > > +MODULE_DESCRIPTION("MAX9271 GMSL serializer subdevice driver");
> > > > +MODULE_AUTHOR("Jacopo Mondi");
> > > > +MODULE_LICENSE("GPL");
>
> --
> Regards,
>
> Laurent Pinchart
Geert Uytterhoeven Aug. 23, 2021, 12:05 p.m. UTC | #6
On Wed, Aug 18, 2021 at 10:26 AM Jacopo Mondi <jacopo@jmondi.org> wrote:
> On Tue, Aug 17, 2021 at 04:49:17PM +0100, Kieran Bingham wrote:
> > On 17/08/2021 08:27, Jacopo Mondi wrote:
> > > The MAX9271 is a GMSL serializer that serializes a video stream
> > > received from an image sensor through the parallel video bus.
> >
> > https://datasheets.maximintegrated.com/en/ds/MAX9271.pdf calls it a
> > "16-Bit GMSL Serializer with Coas or STP Cable Drive"

Surely copy-and-paste would have prevented that typo of coax? ;-)

> Nice we have a public datasheet now!

Looks like I downloaded that one more than 4 years ago?

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 7ad89cac19b7..2dab25a08c9c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11244,6 +11244,15 @@  F:	Documentation/hwmon/max6697.rst
 F:	drivers/hwmon/max6697.c
 F:	include/linux/platform_data/max6697.h
 
+MAX9271 GMSL SERIALIZER DRIVER
+M:	Jacopo Mondi <jacopo+renesas@jmondi.org>
+M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
+M:	Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+M:	Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	drivers/media/i2c/max9271.c
+
 MAX9286 QUAD GMSL DESERIALIZER DRIVER
 M:	Jacopo Mondi <jacopo+renesas@jmondi.org>
 M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 08feb3e8c1bf..b793d1f322d9 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -1300,6 +1300,18 @@  source "drivers/media/i2c/m5mols/Kconfig"
 config VIDEO_MAX9271_LIB
 	tristate
 
+config VIDEO_MAX9271
+	tristate "MAX9271 GMSL serializer support"
+	depends on I2C
+	select V4L2_FWNODE
+	select VIDEO_V4L2_SUBDEV_API
+	select MEDIA_CONTROLLER
+	help
+	  This driver supports the Maxim MAX9271 GMSL serializer.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called max9271.
+
 config VIDEO_RDACM20
 	tristate "IMI RDACM20 camera support"
 	depends on I2C
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 4d879373bd48..37bb51065574 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -130,6 +130,7 @@  obj-$(CONFIG_VIDEO_IMX355)	+= imx355.o
 obj-$(CONFIG_VIDEO_IMX412)	+= imx412.o
 obj-$(CONFIG_VIDEO_MAX9286)	+= max9286.o
 obj-$(CONFIG_VIDEO_MAX9271_LIB)	+= max9271-lib.o
+obj-$(CONFIG_VIDEO_MAX9271)	+= max9271.o
 obj-$(CONFIG_VIDEO_RDACM20)	+= rdacm20.o
 obj-$(CONFIG_VIDEO_RDACM21)	+= rdacm21.o
 obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
diff --git a/drivers/media/i2c/max9271.c b/drivers/media/i2c/max9271.c
new file mode 100644
index 000000000000..64987cba3d3e
--- /dev/null
+++ b/drivers/media/i2c/max9271.c
@@ -0,0 +1,756 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017-2021 Jacopo Mondi
+ * Copyright (C) 2017-2020 Kieran Bingham
+ * Copyright (C) 2017-2019 Laurent Pinchart
+ * Copyright (C) 2017-2019 Niklas Söderlund
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/fwnode.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/property.h>
+
+#include <media/v4l2-async.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+
+#define MAX9271_DEFAULT_ADDR	0x40
+
+/* Register 0x02 */
+#define MAX9271_SPREAD_SPECT_0		(0 << 5)
+#define MAX9271_SPREAD_SPECT_05		(1 << 5)
+#define MAX9271_SPREAD_SPECT_15		(2 << 5)
+#define MAX9271_SPREAD_SPECT_1		(5 << 5)
+#define MAX9271_SPREAD_SPECT_2		(3 << 5)
+#define MAX9271_SPREAD_SPECT_3		(6 << 5)
+#define MAX9271_SPREAD_SPECT_4		(7 << 5)
+#define MAX9271_R02_RES			BIT(4)
+#define MAX9271_PCLK_AUTODETECT		(3 << 2)
+#define MAX9271_SERIAL_AUTODETECT	(0x03)
+/* Register 0x04 */
+#define MAX9271_SEREN			BIT(7)
+#define MAX9271_CLINKEN			BIT(6)
+#define MAX9271_PRBSEN			BIT(5)
+#define MAX9271_SLEEP			BIT(4)
+#define MAX9271_INTTYPE_I2C		(0 << 2)
+#define MAX9271_INTTYPE_UART		(1 << 2)
+#define MAX9271_INTTYPE_NONE		(2 << 2)
+#define MAX9271_REVCCEN			BIT(1)
+#define MAX9271_FWDCCEN			BIT(0)
+/* Register 0x07 */
+#define MAX9271_DBL			BIT(7)
+#define MAX9271_DRS			BIT(6)
+#define MAX9271_BWS			BIT(5)
+#define MAX9271_ES			BIT(4)
+#define MAX9271_HVEN			BIT(2)
+#define MAX9271_EDC_1BIT_PARITY		(0 << 0)
+#define MAX9271_EDC_6BIT_CRC		(1 << 0)
+#define MAX9271_EDC_6BIT_HAMMING	(2 << 0)
+/* Register 0x08 */
+#define MAX9271_INVVS			BIT(7)
+#define MAX9271_INVHS			BIT(6)
+#define MAX9271_REV_LOGAIN		BIT(3)
+#define MAX9271_REV_HIVTH		BIT(0)
+/* Register 0x09 */
+#define MAX9271_ID			0x09
+/* Register 0x0d */
+#define MAX9271_I2CLOCACK		BIT(7)
+#define MAX9271_I2CSLVSH_1046NS_469NS	(3 << 5)
+#define MAX9271_I2CSLVSH_938NS_352NS	(2 << 5)
+#define MAX9271_I2CSLVSH_469NS_234NS	(1 << 5)
+#define MAX9271_I2CSLVSH_352NS_117NS	(0 << 5)
+#define MAX9271_I2CMSTBT_837KBPS	(7 << 2)
+#define MAX9271_I2CMSTBT_533KBPS	(6 << 2)
+#define MAX9271_I2CMSTBT_339KBPS	(5 << 2)
+#define MAX9271_I2CMSTBT_173KBPS	(4 << 2)
+#define MAX9271_I2CMSTBT_105KBPS	(3 << 2)
+#define MAX9271_I2CMSTBT_84KBPS		(2 << 2)
+#define MAX9271_I2CMSTBT_28KBPS		(1 << 2)
+#define MAX9271_I2CMSTBT_8KBPS		(0 << 2)
+#define MAX9271_I2CSLVTO_NONE		(3 << 0)
+#define MAX9271_I2CSLVTO_1024US		(2 << 0)
+#define MAX9271_I2CSLVTO_256US		(1 << 0)
+#define MAX9271_I2CSLVTO_64US		(0 << 0)
+/* Register 0x0f */
+#define MAX9271_GPIO5OUT		BIT(5)
+#define MAX9271_GPIO4OUT		BIT(4)
+#define MAX9271_GPIO3OUT		BIT(3)
+#define MAX9271_GPIO2OUT		BIT(2)
+#define MAX9271_GPIO1OUT		BIT(1)
+#define MAX9271_GPO			BIT(0)
+/* Register 0x15 */
+#define MAX9271_PCLKDET			BIT(0)
+
+struct max9271_device {
+	struct device			*dev;
+	struct i2c_client		*client;
+	struct v4l2_subdev		sd;
+#define MAX9271_SOURCE_PAD	0
+#define MAX9271_SINK_PAD	1
+	struct media_pad		pads[2];
+	struct v4l2_async_notifier	notifier;
+	struct v4l2_async_subdev	*asd;
+	struct v4l2_ctrl_handler	ctrls;
+	struct v4l2_subdev		*sensor;
+};
+
+static inline struct max9271_device *sd_to_max9271(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct max9271_device, sd);
+}
+
+static inline struct max9271_device *i2c_to_max9271(struct i2c_client *client)
+{
+	return sd_to_max9271(i2c_get_clientdata(client));
+}
+
+static inline struct max9271_device *notifier_to_max9271(
+						struct v4l2_async_notifier *nf)
+{
+	return container_of(nf, struct max9271_device, notifier);
+}
+
+/* --- MAX9271 hardware operations --- */
+
+static int max9271_read(struct max9271_device *dev, u8 reg)
+{
+	int ret;
+
+	dev_dbg(&dev->client->dev, "%s(0x%02x)\n", __func__, reg);
+
+	ret = i2c_smbus_read_byte_data(dev->client, reg);
+	if (ret < 0)
+		dev_dbg(&dev->client->dev,
+			"%s: register 0x%02x read failed (%d)\n",
+			__func__, reg, ret);
+
+	return ret;
+}
+
+static int max9271_write(struct max9271_device *dev, u8 reg, u8 val)
+{
+	int ret;
+
+	dev_dbg(&dev->client->dev, "%s(0x%02x, 0x%02x)\n", __func__, reg, val);
+
+	ret = i2c_smbus_write_byte_data(dev->client, reg, val);
+	if (ret < 0)
+		dev_err(&dev->client->dev,
+			"%s: register 0x%02x write failed (%d)\n",
+			__func__, reg, ret);
+
+	return ret;
+}
+
+/*
+ * max9271_pclk_detect() - Detect valid pixel clock from image sensor
+ *
+ * Wait up to 10ms for a valid pixel clock.
+ *
+ * Returns 0 for success, < 0 for pixel clock not properly detected
+ */
+static int max9271_pclk_detect(struct max9271_device *dev)
+{
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < 100; i++) {
+		ret = max9271_read(dev, 0x15);
+		if (ret < 0)
+			return ret;
+
+		if (ret & MAX9271_PCLKDET)
+			return 0;
+
+		usleep_range(50, 100);
+	}
+
+	dev_err(&dev->client->dev, "Unable to detect valid pixel clock\n");
+
+	return -EIO;
+}
+
+static void max9271_wake_up(struct max9271_device *dev)
+{
+	/*
+	 * Use the chip default address as this function has to be called
+	 * before any other one.
+	 */
+	dev->client->addr = MAX9271_DEFAULT_ADDR;
+	i2c_smbus_read_byte(dev->client);
+	usleep_range(5000, 8000);
+}
+
+static int max9271_set_serial_link(struct max9271_device *dev, bool enable)
+{
+	int ret;
+	u8 val = MAX9271_REVCCEN | MAX9271_FWDCCEN;
+
+	if (enable) {
+		ret = max9271_pclk_detect(dev);
+		if (ret)
+			return ret;
+
+		val |= MAX9271_SEREN;
+	} else {
+		val |= MAX9271_CLINKEN;
+	}
+
+	/*
+	 * The serializer temporarily disables the reverse control channel for
+	 * 350µs after starting/stopping the forward serial link, but the
+	 * deserializer synchronization time isn't clearly documented.
+	 *
+	 * According to the serializer datasheet we should wait 3ms, while
+	 * according to the deserializer datasheet we should wait 5ms.
+	 *
+	 * Short delays here appear to show bit-errors in the writes following.
+	 * Therefore a conservative delay seems best here.
+	 */
+	ret = max9271_write(dev, 0x04, val);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(5000, 8000);
+
+	return 0;
+}
+
+static int max9271_configure_i2c(struct max9271_device *dev, u8 i2c_config)
+{
+	int ret;
+
+	ret = max9271_write(dev, 0x0d, i2c_config);
+	if (ret < 0)
+		return ret;
+
+	/* The delay required after an I2C bus configuration change is not
+	 * characterized in the serializer manual. Sleep up to 5msec to
+	 * stay safe.
+	 */
+	usleep_range(3500, 5000);
+
+	return 0;
+}
+
+static int max9271_set_high_threshold(struct max9271_device *dev, bool enable)
+{
+	int ret;
+
+	ret = max9271_read(dev, 0x08);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Enable or disable reverse channel high threshold to increase
+	 * immunity to power supply noise.
+	 */
+	ret = max9271_write(dev, 0x08, enable ? ret | BIT(0) : ret & ~BIT(0));
+	if (ret < 0)
+		return ret;
+
+	usleep_range(2000, 2500);
+
+	return 0;
+}
+
+static int max9271_configure_gmsl_link(struct max9271_device *dev)
+{
+	int ret;
+
+	/*
+	 * Configure the GMSL link:
+	 *
+	 * - Double input mode, high data rate, 24-bit mode
+	 * - Latch input data on PCLKIN rising edge
+	 * - Enable HS/VS encoding
+	 * - 1-bit parity error detection
+	 *
+	 * TODO: Make the GMSL link configuration parametric.
+	 */
+	ret = max9271_write(dev, 0x07, MAX9271_DBL | MAX9271_HVEN |
+			    MAX9271_EDC_1BIT_PARITY);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(5000, 8000);
+
+	/*
+	 * Adjust spread spectrum to +4% and auto-detect pixel clock
+	 * and serial link rate.
+	 */
+	ret = max9271_write(dev, 0x02,
+			    MAX9271_SPREAD_SPECT_4 | MAX9271_R02_RES |
+			    MAX9271_PCLK_AUTODETECT |
+			    MAX9271_SERIAL_AUTODETECT);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(5000, 8000);
+
+	return 0;
+}
+
+static int max9271_set_gpios(struct max9271_device *dev, u8 gpio_mask)
+{
+	int ret;
+
+	ret = max9271_read(dev, 0x0f);
+	if (ret < 0)
+		return 0;
+
+	ret |= gpio_mask;
+	ret = max9271_write(dev, 0x0f, ret);
+	if (ret < 0) {
+		dev_err(&dev->client->dev, "Failed to set gpio (%d)\n", ret);
+		return ret;
+	}
+
+	usleep_range(3500, 5000);
+
+	return 0;
+}
+
+static int max9271_clear_gpios(struct max9271_device *dev, u8 gpio_mask)
+{
+	int ret;
+
+	ret = max9271_read(dev, 0x0f);
+	if (ret < 0)
+		return 0;
+
+	ret &= ~gpio_mask;
+	ret = max9271_write(dev, 0x0f, ret);
+	if (ret < 0) {
+		dev_err(&dev->client->dev, "Failed to clear gpio (%d)\n", ret);
+		return ret;
+	}
+
+	usleep_range(3500, 5000);
+
+	return 0;
+}
+
+static int max9271_enable_gpios(struct max9271_device *dev, u8 gpio_mask)
+{
+	int ret;
+
+	ret = max9271_read(dev, 0x0e);
+	if (ret < 0)
+		return 0;
+
+	/* BIT(0) reserved: GPO is always enabled. */
+	ret |= (gpio_mask & ~BIT(0));
+	ret = max9271_write(dev, 0x0e, ret);
+	if (ret < 0) {
+		dev_err(&dev->client->dev, "Failed to enable gpio (%d)\n", ret);
+		return ret;
+	}
+
+	usleep_range(3500, 5000);
+
+	return 0;
+}
+
+static int max9271_verify_id(struct max9271_device *dev)
+{
+	int ret;
+
+	ret = max9271_read(dev, 0x1e);
+	if (ret < 0) {
+		dev_err(&dev->client->dev, "MAX9271 ID read failed (%d)\n",
+			ret);
+		return ret;
+	}
+
+	if (ret != MAX9271_ID) {
+		dev_err(&dev->client->dev, "MAX9271 ID mismatch (0x%02x)\n",
+			ret);
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static int max9271_set_address(struct max9271_device *dev, u8 addr)
+{
+	int ret;
+
+	ret = max9271_write(dev, 0x00, addr << 1);
+	if (ret < 0) {
+		dev_err(&dev->client->dev,
+			"MAX9271 I2C address change failed (%d)\n", ret);
+		return ret;
+	}
+	usleep_range(3500, 5000);
+
+	return 0;
+}
+
+/* --- V4L2 Subdev Ops --- */
+
+static int max9271_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct max9271_device *max9271 = sd_to_max9271(sd);
+
+	return max9271_set_serial_link(max9271, enable);
+}
+
+static int max9271_enum_mbus_code(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_state *sd_state,
+				  struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct max9271_device *max9271 = sd_to_max9271(sd);
+
+	return v4l2_subdev_call(max9271->sensor, pad, enum_mbus_code, NULL,
+				code);
+}
+
+static int max9271_get_fmt(struct v4l2_subdev *sd,
+			   struct v4l2_subdev_state *sd_state,
+			   struct v4l2_subdev_format *format)
+{
+	struct max9271_device *max9271 = sd_to_max9271(sd);
+
+	return v4l2_subdev_call(max9271->sensor, pad, get_fmt, NULL,
+				format);
+}
+
+static int max9271_set_fmt(struct v4l2_subdev *sd,
+			   struct v4l2_subdev_state *sd_state,
+			   struct v4l2_subdev_format *format)
+{
+	struct max9271_device *max9271 = sd_to_max9271(sd);
+
+	return v4l2_subdev_call(max9271->sensor, pad, set_fmt, NULL,
+				format);
+}
+
+static int max9271_post_register(struct v4l2_subdev *sd)
+{
+	struct max9271_device *max9271 = sd_to_max9271(sd);
+	int ret;
+
+	ret = max9271_verify_id(max9271);
+	if (ret < 0)
+		return ret;
+
+	ret = max9271_enable_gpios(max9271, MAX9271_GPIO1OUT);
+	if (ret)
+		return ret;
+
+	ret = max9271_configure_gmsl_link(max9271);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops max9271_video_ops = {
+	.s_stream	= max9271_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops max9271_subdev_pad_ops = {
+	.enum_mbus_code = max9271_enum_mbus_code,
+	.get_fmt	= max9271_get_fmt,
+	.set_fmt	= max9271_set_fmt,
+};
+
+static const struct v4l2_subdev_core_ops max9271_core_ops = {
+	.post_register	= max9271_post_register,
+};
+
+static const struct v4l2_subdev_ops max9271_subdev_ops = {
+	.core		= &max9271_core_ops,
+	.video		= &max9271_video_ops,
+	.pad		= &max9271_subdev_pad_ops,
+};
+
+/* --- V4L2 Async Notifier --- */
+
+static int max9271_notify_bound(struct v4l2_async_notifier *notifier,
+				struct v4l2_subdev *subdev,
+				struct v4l2_async_subdev *asd)
+{
+	struct max9271_device *max9271 = notifier_to_max9271(notifier);
+	int ret, pad;
+
+	/*
+	 * Reserve more space than necessary for controls inherited by the
+	 * remote subdev.
+	 */
+	ret = v4l2_ctrl_handler_init(&max9271->ctrls, 16);
+	if (ret < 0) {
+		dev_err(max9271->dev,
+			"Unable to initialize control handler: %d\n", ret);
+		return ret;
+	}
+
+	ret = v4l2_ctrl_add_handler(&max9271->ctrls, subdev->ctrl_handler,
+				    NULL, true);
+	if (ret < 0) {
+		dev_err(max9271->dev,
+			"Unable to add subdev control handler: %d\n", ret);
+		goto error_free_handler;
+	}
+	max9271->sd.ctrl_handler = &max9271->ctrls;
+
+	/* Create media link with the remote sensor source pad. */
+	pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
+					  MEDIA_PAD_FL_SOURCE);
+	if (pad < 0) {
+		dev_err(max9271->dev,
+			"Failed to find source pad for %s\n", subdev->name);
+		ret = pad;
+		goto error_free_handler;
+	}
+
+	ret = media_create_pad_link(&subdev->entity, pad,
+				    &max9271->sd.entity, MAX9271_SINK_PAD,
+				    MEDIA_LNK_FL_ENABLED |
+				    MEDIA_LNK_FL_IMMUTABLE);
+	if (ret)
+		goto error_free_handler;
+
+	max9271->sensor = subdev;
+
+	/*
+	 * Hold OV10635 in reset during max9271 configuration. The reset signal
+	 * has to be asserted for at least 200 microseconds.
+	 */
+	ret = max9271_clear_gpios(max9271, MAX9271_GPIO1OUT);
+	if (ret)
+		return ret;
+	usleep_range(200, 500);
+
+	/*
+	 * Release ov10635 from reset and initialize it. The image sensor
+	 * requires at least 2048 XVCLK cycles (85 micro-seconds at 24MHz)
+	 * before being available. Stay safe and wait up to 500 micro-seconds.
+	 */
+	ret = max9271_set_gpios(max9271, MAX9271_GPIO1OUT);
+	if (ret)
+		return ret;
+	usleep_range(100, 500);
+
+	/*
+	 * Call the sensor post_register operation to complete its
+	 * initialization.
+	 */
+	ret = v4l2_subdev_call(max9271->sensor, core, post_register);
+	if (ret) {
+		dev_err(max9271->dev, "Failed to initialize sensor %u\n", ret);
+		goto error_remove_link;
+	}
+
+	return 0;
+
+error_remove_link:
+	media_entity_remove_links(&max9271->sd.entity);
+	max9271->sensor = NULL;
+
+error_free_handler:
+	v4l2_ctrl_handler_free(&max9271->ctrls);
+	max9271->sd.ctrl_handler = NULL;
+
+	return ret;
+}
+
+static void max9271_notify_unbind(struct v4l2_async_notifier *notifier,
+				  struct v4l2_subdev *subdev,
+				  struct v4l2_async_subdev *asd)
+{
+	struct max9271_device *max9271 = notifier_to_max9271(notifier);
+
+	media_entity_remove_links(&max9271->sd.entity);
+	max9271->sensor = NULL;
+}
+
+static const struct v4l2_async_notifier_operations max9271_notifier_ops = {
+	.bound = max9271_notify_bound,
+	.unbind = max9271_notify_unbind,
+};
+
+static int max9271_parse_dt(struct max9271_device *max9271)
+{
+	struct fwnode_handle *ep, *remote;
+	struct v4l2_fwnode_endpoint vep = {
+		.bus_type = V4L2_MBUS_PARALLEL,
+	};
+	int ret;
+
+	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(max9271->dev), 1, 0, 0);
+	if (!ep) {
+		dev_err(max9271->dev, "Unable to get sensor endpoint: %pOF\n",
+			max9271->dev->of_node);
+		return -ENOENT;
+	}
+
+	remote = fwnode_graph_get_remote_endpoint(ep);
+	if (!remote) {
+		dev_err(max9271->dev, "Unable to get remote endpoint: %pOF\n",
+			max9271->dev->of_node);
+		return -ENOENT;
+	}
+
+	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
+	fwnode_handle_put(ep);
+	if (ret) {
+		fwnode_handle_put(remote);
+		dev_err(max9271->dev, "Unable to parse endpoint: %pOF\n",
+			to_of_node(ep));
+		return ret;
+	}
+
+	v4l2_async_notifier_init(&max9271->notifier);
+	max9271->asd = v4l2_async_notifier_add_fwnode_subdev(&max9271->notifier,
+					      remote, struct v4l2_async_subdev);
+	fwnode_handle_put(remote);
+	if (IS_ERR(max9271->asd))
+		return PTR_ERR(max9271->asd);
+
+	max9271->notifier.ops = &max9271_notifier_ops;
+	max9271->notifier.flags = V4L2_ASYNC_NOTIFIER_DEFER_POST_REGISTER;
+	ret = v4l2_async_subdev_notifier_register(&max9271->sd,
+						  &max9271->notifier);
+	if (ret < 0) {
+		v4l2_async_notifier_cleanup(&max9271->notifier);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int max9271_init(struct max9271_device *max9271)
+{
+	int ret;
+	u8 addr;
+
+	max9271_wake_up(max9271);
+
+	/* Re-program the chip address. */
+	addr = max9271->client->addr;
+	max9271->client->addr = MAX9271_DEFAULT_ADDR;
+	ret = max9271_set_address(max9271, addr);
+	if (ret < 0)
+		return ret;
+	max9271->client->addr = addr;
+
+	/* Serial link disabled during conf as it needs a valid pixel clock. */
+	ret = max9271_set_serial_link(max9271, false);
+	if (ret)
+		return ret;
+
+	/*
+	 *  Ensure that we have a good link configuration before attempting to
+	 *  identify the device.
+	 */
+	ret = max9271_configure_i2c(max9271, MAX9271_I2CSLVSH_469NS_234NS |
+					     MAX9271_I2CSLVTO_1024US |
+					     MAX9271_I2CMSTBT_105KBPS);
+	if (ret)
+		return ret;
+
+	/*
+	 * Set reverse channel high threshold to increase noise immunity.
+	 *
+	 * This should be compensated by increasing the reverse channel
+	 * amplitude on the remote deserializer side.
+	 */
+	return max9271_set_high_threshold(max9271, true);
+}
+
+static int max9271_probe(struct i2c_client *client)
+{
+	struct max9271_device *max9271;
+	struct fwnode_handle *ep;
+	int ret;
+
+	max9271 = devm_kzalloc(&client->dev, sizeof(*max9271), GFP_KERNEL);
+	if (!max9271)
+		return -ENOMEM;
+	max9271->dev = &client->dev;
+	max9271->client = client;
+
+	/* Initialize and register the subdevice. */
+	v4l2_i2c_subdev_init(&max9271->sd, client, &max9271_subdev_ops);
+	max9271->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	max9271->pads[MAX9271_SOURCE_PAD].flags = MEDIA_PAD_FL_SOURCE;
+	max9271->pads[MAX9271_SINK_PAD].flags = MEDIA_PAD_FL_SINK;
+	max9271->sd.entity.flags |= MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
+	ret = media_entity_pads_init(&max9271->sd.entity, 2, max9271->pads);
+	if (ret < 0)
+		return ret;
+
+	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(max9271->dev), 0, 0, 0);
+	if (!ep) {
+		dev_err(max9271->dev, "Unable to get endpoint 0: %pOF\n",
+			max9271->dev->of_node);
+		ret = -ENODEV;
+		goto error_media_entity;
+	}
+
+	max9271->sd.fwnode = ep;
+	ret = v4l2_async_register_subdev(&max9271->sd);
+	if (ret)
+		goto error_put_node;
+
+	ret = max9271_parse_dt(max9271);
+	if (ret)
+		goto error_unregister_subdev;
+
+	ret = max9271_init(max9271);
+	if (ret)
+		goto error_unregister_subdev;
+
+	return 0;
+
+error_unregister_subdev:
+	v4l2_async_unregister_subdev(&max9271->sd);
+error_put_node:
+	fwnode_handle_put(max9271->sd.fwnode);
+error_media_entity:
+	media_entity_cleanup(&max9271->sd.entity);
+
+	return ret;
+}
+
+static int max9271_remove(struct i2c_client *client)
+{
+	struct max9271_device *max9271 = i2c_to_max9271(client);
+
+	v4l2_ctrl_handler_free(&max9271->ctrls);
+	v4l2_async_notifier_cleanup(&max9271->notifier);
+	v4l2_async_unregister_subdev(&max9271->sd);
+	fwnode_handle_put(max9271->sd.fwnode);
+	media_entity_cleanup(&max9271->sd.entity);
+
+	return 0;
+}
+
+static const struct of_device_id max9271_of_ids[] = {
+	{ .compatible = "imi,max9271", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max9271_of_ids);
+
+static struct i2c_driver max9271_i2c_driver = {
+	.driver	= {
+		.name	= "max9271",
+		.of_match_table = max9271_of_ids,
+	},
+	.probe_new	= max9271_probe,
+	.remove		= max9271_remove,
+};
+
+module_i2c_driver(max9271_i2c_driver);
+
+MODULE_DESCRIPTION("MAX9271 GMSL serializer subdevice driver");
+MODULE_AUTHOR("Jacopo Mondi");
+MODULE_LICENSE("GPL");