diff mbox series

[RFC,21/28] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings

Message ID 20220112174612.10773-22-biju.das.jz@bp.renesas.com (mailing list archive)
State Superseded
Delegated to: Kieran Bingham
Headers show
Series Add RZ/G2L Display support | expand

Commit Message

Biju Das Jan. 12, 2022, 5:46 p.m. UTC 
The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's. It
can operate in DSI mode, with up to four data lanes.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 .../bindings/display/bridge/renesas,dsi.yaml  | 143 ++++++++++++++++++
 1 file changed, 143 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml

Comments

Rob Herring Jan. 22, 2022, 1:05 a.m. UTC | #1 
On Wed, Jan 12, 2022 at 05:46:05PM +0000, Biju Das wrote:
> The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's. It
> can operate in DSI mode, with up to four data lanes.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
>  .../bindings/display/bridge/renesas,dsi.yaml  | 143 ++++++++++++++++++
>  1 file changed, 143 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> new file mode 100644
> index 000000000000..8e56a9c53cc5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> @@ -0,0 +1,143 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas R-Car MIPI DSI Encoder
> +
> +maintainers:
> +  - Biju Das <biju.das.jz@bp.renesas.com>
> +
> +description: |
> +  This binding describes the MIPI DSI encoder embedded in the Renesas
> +  RZ/G2L family of SoC's. The encoder can operate in DSI mode with up
> +  to four data lanes.

Need a ref to dsi-controller.yaml.

> +
> +properties:
> +  compatible:
> +    enum:
> +      - renesas,r9a07g044-mipi-dsi    # for RZ/G2L
> +
> +  reg:
> +    items:
> +      - description: Link register
> +      - description: D-PHY register

D-PHY isn't a separate block?

> +
> +  clocks:
> +    items:
> +      - description: DSI D-PHY PLL multiplied clock
> +      - description: DSI D-PHY system clock
> +      - description: DSI AXI bus clock
> +      - description: DSI Register access clock
> +      - description: DSI Video clock
> +      - description: DSI D_PHY Escape mode Receive clock
> +
> +  clock-names:
> +    items:
> +      - const: pllclk
> +      - const: sysclk
> +      - const: aclk
> +      - const: pclk
> +      - const: vclk
> +      - const: lpclk
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    items:
> +      - description: MIPI_DSI_CMN_RSTB
> +      - description: MIPI_DSI_ARESET_N
> +      - description: MIPI_DSI_PRESET_N
> +
> +  reset-names:
> +    items:
> +      - const: rst
> +      - const: arst
> +      - const: prst
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Parallel input port
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description: DSI output port
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - resets
> +  - reset-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> +
> +    dsi0: dsi@10860000 {
> +        compatible = "renesas,r9a07g044-mipi-dsi";
> +        reg = <0x10860000 0x10000>,
> +              <0x10850000 0x10000>;
> +        power-domains = <&cpg>;
> +        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
> +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
> +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
> +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
> +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
> +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
> +        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
> +        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
> +                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
> +                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
> +        reset-names = "rst", "arst", "prst";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +                dsi0_in: endpoint {
> +                    remote-endpoint = <&du_out_dsi0>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +                dsi0_out: endpoint {
> +                    data-lanes = <1 2 3 4>;
> +                    remote-endpoint = <&adv7535_in>;
> +                };
> +            };
> +        };
> +    };
> +...
> -- 
> 2.17.1
> 
>
Biju Das Jan. 22, 2022, 11:19 a.m. UTC | #2 
Hi Rob,

Thanks for the review.

> Subject: Re: [RFC 21/28] dt-bindings: display: bridge: Document RZ/G2L
> MIPI DSI TX bindings
> 
> On Wed, Jan 12, 2022 at 05:46:05PM +0000, Biju Das wrote:
> > The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's.
> > It can operate in DSI mode, with up to four data lanes.
> >
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > ---
> >  .../bindings/display/bridge/renesas,dsi.yaml  | 143
> > ++++++++++++++++++
> >  1 file changed, 143 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> > b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> > new file mode 100644
> > index 000000000000..8e56a9c53cc5
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yam
> > +++ l
> > @@ -0,0 +1,143 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +https://jpn01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > +cetree.org%2Fschemas%2Fdisplay%2Fbridge%2Frenesas%2Cdsi.yaml%23&amp;d
> > +ata=04%7C01%7Cbiju.das.jz%40bp.renesas.com%7C0494a54e80ad4334fbd208d9
> > +dd43393b%7C53d82571da1947e49cb4625a166a4a2a%7C0%7C0%7C637784103062464
> > +167%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBT
> > +iI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&amp;sdata=krF2TinxFIRvSQWNMrJpAjUpkk
> > +cghJsFzWIOmh2Nwno%3D&amp;reserved=0
> > +$schema:
> > +https://jpn01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&amp;data=04%7C01%7Cbiju.das.
> > +jz%40bp.renesas.com%7C0494a54e80ad4334fbd208d9dd43393b%7C53d82571da19
> > +47e49cb4625a166a4a2a%7C0%7C0%7C637784103062464167%7CUnknown%7CTWFpbGZ
> > +sb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%
> > +3D%7C3000&amp;sdata=XrwV3g0Jw0%2Bsi0J5PygxWTw614a0%2FtQGDF2HeMdBVsA%3
> > +D&amp;reserved=0
> > +
> > +title: Renesas R-Car MIPI DSI Encoder
> > +
> > +maintainers:
> > +  - Biju Das <biju.das.jz@bp.renesas.com>
> > +
> > +description: |
> > +  This binding describes the MIPI DSI encoder embedded in the Renesas
> > +  RZ/G2L family of SoC's. The encoder can operate in DSI mode with up
> > +  to four data lanes.
> 
> Need a ref to dsi-controller.yaml.

Agreed. Will add this.

> 
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - renesas,r9a07g044-mipi-dsi    # for RZ/G2L
> > +
> > +  reg:
> > +    items:
> > +      - description: Link register
> > +      - description: D-PHY register
> 
> D-PHY isn't a separate block?

MIPI-DSI Tx module composed of MIPI DSI-2 Host Controller (LINK), and MIPI D-PHY Tx (DPHY).

Basically both D-PHY and Link are integrated inside MIPI-DSI Tx module.

Regards,
Biju

> 
> > +
> > +  clocks:
> > +    items:
> > +      - description: DSI D-PHY PLL multiplied clock
> > +      - description: DSI D-PHY system clock
> > +      - description: DSI AXI bus clock
> > +      - description: DSI Register access clock
> > +      - description: DSI Video clock
> > +      - description: DSI D_PHY Escape mode Receive clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: pllclk
> > +      - const: sysclk
> > +      - const: aclk
> > +      - const: pclk
> > +      - const: vclk
> > +      - const: lpclk
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    items:
> > +      - description: MIPI_DSI_CMN_RSTB
> > +      - description: MIPI_DSI_ARESET_N
> > +      - description: MIPI_DSI_PRESET_N
> > +
> > +  reset-names:
> > +    items:
> > +      - const: rst
> > +      - const: arst
> > +      - const: prst
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: Parallel input port
> > +
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        unevaluatedProperties: false
> > +        description: DSI output port
> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: /schemas/media/video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              data-lanes:
> > +                minItems: 1
> > +                maxItems: 4
> > +
> > +            required:
> > +              - data-lanes
> > +
> > +    required:
> > +      - port@0
> > +      - port@1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-names
> > +  - power-domains
> > +  - resets
> > +  - reset-names
> > +  - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> > +
> > +    dsi0: dsi@10860000 {
> > +        compatible = "renesas,r9a07g044-mipi-dsi";
> > +        reg = <0x10860000 0x10000>,
> > +              <0x10850000 0x10000>;
> > +        power-domains = <&cpg>;
> > +        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
> > +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
> > +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
> > +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
> > +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
> > +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
> > +        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk",
> "lpclk";
> > +        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
> > +                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
> > +                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
> > +        reset-names = "rst", "arst", "prst";
> > +
> > +        ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            port@0 {
> > +                reg = <0>;
> > +                dsi0_in: endpoint {
> > +                    remote-endpoint = <&du_out_dsi0>;
> > +                };
> > +            };
> > +
> > +            port@1 {
> > +                reg = <1>;
> > +                dsi0_out: endpoint {
> > +                    data-lanes = <1 2 3 4>;
> > +                    remote-endpoint = <&adv7535_in>;
> > +                };
> > +            };
> > +        };
> > +    };
> > +...
> > --
> > 2.17.1
> >
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
new file mode 100644
index 000000000000..8e56a9c53cc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
@@ -0,0 +1,143 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car MIPI DSI Encoder
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  This binding describes the MIPI DSI encoder embedded in the Renesas
+  RZ/G2L family of SoC's. The encoder can operate in DSI mode with up
+  to four data lanes.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r9a07g044-mipi-dsi    # for RZ/G2L
+
+  reg:
+    items:
+      - description: Link register
+      - description: D-PHY register
+
+  clocks:
+    items:
+      - description: DSI D-PHY PLL multiplied clock
+      - description: DSI D-PHY system clock
+      - description: DSI AXI bus clock
+      - description: DSI Register access clock
+      - description: DSI Video clock
+      - description: DSI D_PHY Escape mode Receive clock
+
+  clock-names:
+    items:
+      - const: pllclk
+      - const: sysclk
+      - const: aclk
+      - const: pclk
+      - const: vclk
+      - const: lpclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: MIPI_DSI_CMN_RSTB
+      - description: MIPI_DSI_ARESET_N
+      - description: MIPI_DSI_PRESET_N
+
+  reset-names:
+    items:
+      - const: rst
+      - const: arst
+      - const: prst
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DSI output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    dsi0: dsi@10860000 {
+        compatible = "renesas,r9a07g044-mipi-dsi";
+        reg = <0x10860000 0x10000>,
+              <0x10850000 0x10000>;
+        power-domains = <&cpg>;
+        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+        reset-names = "rst", "arst", "prst";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi0_in: endpoint {
+                    remote-endpoint = <&du_out_dsi0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&adv7535_in>;
+                };
+            };
+        };
+    };
+...