diff mbox series

[V2,1/4] arm64: dts: renesas: rzg2lc-smarc-pinfunction: Sort the nodes

Message ID 20220303164155.7706-2-biju.das.jz@bp.renesas.com (mailing list archive)
State Mainlined
Commit 1ed19368bc49b267ea000a397ad75581076698cc
Delegated to: Geert Uytterhoeven
Headers show
Series Add I2C and Audio support for RZ/G2LC SMARC EVK | expand

Commit Message

Biju Das March 3, 2022, 4:41 p.m. UTC 
Sort the pinctrl nodes alphabetically.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2:
 * Fixed typo in commit message
---
 .../dts/renesas/rzg2lc-smarc-pinfunction.dtsi | 24 +++++++++----------
 1 file changed, 12 insertions(+), 12 deletions(-)

Comments

Geert Uytterhoeven March 18, 2022, 1:13 p.m. UTC | #1 
On Thu, Mar 3, 2022 at 5:42 PM Biju Das <biju.das.jz@bp.renesas.com> wrote:
> Sort the pinctrl nodes alphabetically.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v5.19.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
index 5f5ec21e655c..53759c3ddecb 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
@@ -12,11 +12,6 @@ 
 	pinctrl-0 = <&sound_clk_pins>;
 	pinctrl-names = "default";
 
-	scif0_pins: scif0 {
-		pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>,	/* TxD */
-			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */
-	};
-
 #if SW_SCIF_CAN
 	/* SW8 should be at position 2->1 */
 	can1_pins: can1 {
@@ -25,13 +20,6 @@ 
 	};
 #endif
 
-	scif1_pins: scif1 {
-		pinmux = <RZG2L_PORT_PINMUX(40, 0, 1)>, /* TxD */
-			 <RZG2L_PORT_PINMUX(40, 1, 1)>, /* RxD */
-			 <RZG2L_PORT_PINMUX(41, 0, 1)>, /* CTS# */
-			 <RZG2L_PORT_PINMUX(41, 1, 1)>; /* RTS# */
-	};
-
 #if SW_RSPI_CAN
 	/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
 	can1-stb-hog {
@@ -47,6 +35,18 @@ 
 	};
 #endif
 
+	scif0_pins: scif0 {
+		pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>,	/* TxD */
+			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */
+	};
+
+	scif1_pins: scif1 {
+		pinmux = <RZG2L_PORT_PINMUX(40, 0, 1)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(40, 1, 1)>, /* RxD */
+			 <RZG2L_PORT_PINMUX(41, 0, 1)>, /* CTS# */
+			 <RZG2L_PORT_PINMUX(41, 1, 1)>; /* RTS# */
+	};
+
 	sd1-pwr-en-hog {
 		gpio-hog;
 		gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;