diff mbox series

[v4,5/9] dma: dw: dmamux: Introduce RZN1 DMA router support

Message ID 20220310155755.287294-6-miquel.raynal@bootlin.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series RZN1 DMA support | expand

Commit Message

Miquel Raynal March 10, 2022, 3:57 p.m. UTC
The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional
dmamux register located in the system control area which can take up to
32 requests (16 per DMA controller). Each DMA channel can be wired to
two different peripherals.

We need two additional information from the 'dmas' property: the channel
(bit in the dmamux register) that must be accessed and the value of the
mux for this channel.

Aside from the driver introduction, as these devices are described as
subnodes of the system controller, we also need the system controller
(clock) driver to populate its children manually. Starting from now on,
one child can be the dmamux.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/clk/renesas/r9a06g032-clocks.c |   3 +-
 drivers/dma/dw/Kconfig                 |   9 ++
 drivers/dma/dw/Makefile                |   2 +
 drivers/dma/dw/rzn1-dmamux.c           | 152 +++++++++++++++++++++++++
 4 files changed, 165 insertions(+), 1 deletion(-)
 create mode 100644 drivers/dma/dw/rzn1-dmamux.c

Comments

Andy Shevchenko March 10, 2022, 5:44 p.m. UTC | #1
On Thu, Mar 10, 2022 at 04:57:51PM +0100, Miquel Raynal wrote:
> The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional
> dmamux register located in the system control area which can take up to
> 32 requests (16 per DMA controller). Each DMA channel can be wired to
> two different peripherals.
> 
> We need two additional information from the 'dmas' property: the channel
> (bit in the dmamux register) that must be accessed and the value of the
> mux for this channel.
> 
> Aside from the driver introduction, as these devices are described as
> subnodes of the system controller, we also need the system controller
> (clock) driver to populate its children manually. Starting from now on,
> one child can be the dmamux.

In all DMA engine related patches the prefix should be "dmaengine:".

...

> +static void *rzn1_dmamux_route_allocate(struct of_phandle_args *dma_spec,
> +					struct of_dma *ofdma)
> +{
> +	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
> +	struct rzn1_dmamux_data *dmamux = platform_get_drvdata(pdev);
> +	struct rzn1_dmamux_map *map;
> +	unsigned int dmac_idx, chan, val;
> +	u32 mask;
> +	int ret;
> +
> +	map = kzalloc(sizeof(*map), GFP_KERNEL);
> +	if (!map)
> +		return ERR_PTR(-ENOMEM);

> +	if (dma_spec->args_count != 6) {
> +		kfree(map);
> +		return ERR_PTR(-EINVAL);
> +	}

You may move this check above and get one kfree() call less.
Moreover, you may use a goto approach to call kfree() from
a single point of exit.

> +	chan = dma_spec->args[0];
> +	map->req_idx = dma_spec->args[4];
> +	val = dma_spec->args[5];
> +	dma_spec->args_count -= 2;
> +
> +	if (chan >= RZN1_DMAMUX_SPLIT) {
> +		kfree(map);
> +		dev_err(&pdev->dev, "Invalid DMA request line: %u\n", chan);
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	if (map->req_idx >= RZN1_DMAMUX_LINES ||
> +	    (map->req_idx % RZN1_DMAMUX_SPLIT) != chan) {
> +		kfree(map);
> +		dev_err(&pdev->dev, "Invalid MUX request line: %u\n", map->req_idx);
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	dmac_idx = map->req_idx < RZN1_DMAMUX_SPLIT ? 0 : 1;
> +	dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", dmac_idx);
> +	if (!dma_spec->np) {
> +		kfree(map);
> +		dev_err(&pdev->dev, "Can't get DMA master\n");
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	dev_dbg(&pdev->dev, "Mapping DMAMUX request %u to DMAC%u request %u\n",
> +		map->req_idx, dmac_idx, chan);
> +
> +	mask = BIT(map->req_idx);
> +	mutex_lock(&dmamux->lock);
> +	dmamux->used_chans |= mask;
> +	ret = r9a06g032_sysctrl_set_dmamux(mask, val ? mask : 0);
> +	mutex_unlock(&dmamux->lock);
> +	if (ret) {
> +		rzn1_dmamux_free(&pdev->dev, map);
> +		return ERR_PTR(ret);
> +	}
> +
> +	return map;
> +}
Vinod Koul March 11, 2022, 10:23 a.m. UTC | #2
On 10-03-22, 19:44, Andy Shevchenko wrote:
> On Thu, Mar 10, 2022 at 04:57:51PM +0100, Miquel Raynal wrote:
> > The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional
> > dmamux register located in the system control area which can take up to
> > 32 requests (16 per DMA controller). Each DMA channel can be wired to
> > two different peripherals.
> > 
> > We need two additional information from the 'dmas' property: the channel
> > (bit in the dmamux register) that must be accessed and the value of the
> > mux for this channel.
> > 
> > Aside from the driver introduction, as these devices are described as
> > subnodes of the system controller, we also need the system controller
> > (clock) driver to populate its children manually. Starting from now on,
> > one child can be the dmamux.
> 
> In all DMA engine related patches the prefix should be "dmaengine:".

Yep!
diff mbox series

Patch

diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c
index edcdbe3152f0..5670a82945a8 100644
--- a/drivers/clk/renesas/r9a06g032-clocks.c
+++ b/drivers/clk/renesas/r9a06g032-clocks.c
@@ -16,6 +16,7 @@ 
 #include <linux/math64.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_clock.h>
 #include <linux/pm_domain.h>
@@ -996,7 +997,7 @@  static int __init r9a06g032_clocks_probe(struct platform_device *pdev)
 
 	sysctrl_priv = clocks;
 
-	return 0;
+	return of_platform_populate(np, NULL, NULL, dev);
 }
 
 static const struct of_device_id r9a06g032_match[] = {
diff --git a/drivers/dma/dw/Kconfig b/drivers/dma/dw/Kconfig
index db25f9b7778c..a9828ddd6d06 100644
--- a/drivers/dma/dw/Kconfig
+++ b/drivers/dma/dw/Kconfig
@@ -16,6 +16,15 @@  config DW_DMAC
 	  Support the Synopsys DesignWare AHB DMA controller. This
 	  can be integrated in chips such as the Intel Cherrytrail.
 
+config RZN1_DMAMUX
+	tristate "Renesas RZ/N1 DMAMUX driver"
+	depends on DW_DMAC
+	depends on ARCH_RZN1 || COMPILE_TEST
+	help
+	  Support the Renesas RZ/N1 DMAMUX which is located in front of
+	  the Synopsys DesignWare AHB DMA controller located on Renesas
+	  SoCs.
+
 config DW_DMAC_PCI
 	tristate "Synopsys DesignWare AHB DMA PCI driver"
 	depends on PCI
diff --git a/drivers/dma/dw/Makefile b/drivers/dma/dw/Makefile
index a6f358ad8591..8025f75e589c 100644
--- a/drivers/dma/dw/Makefile
+++ b/drivers/dma/dw/Makefile
@@ -7,5 +7,7 @@  obj-$(CONFIG_DW_DMAC)		+= dw_dmac.o
 dw_dmac-y			:= platform.o
 dw_dmac-$(CONFIG_OF)		+= of.o
 
+obj-$(CONFIG_RZN1_DMAMUX)	+= rzn1-dmamux.o
+
 obj-$(CONFIG_DW_DMAC_PCI)	+= dw_dmac_pci.o
 dw_dmac_pci-y			:= pci.o
diff --git a/drivers/dma/dw/rzn1-dmamux.c b/drivers/dma/dw/rzn1-dmamux.c
new file mode 100644
index 000000000000..e8ee9b03261c
--- /dev/null
+++ b/drivers/dma/dw/rzn1-dmamux.c
@@ -0,0 +1,152 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Schneider-Electric
+ * Author: Miquel Raynal <miquel.raynal@bootlin.com
+ * Based on TI crossbar driver written by Peter Ujfalusi <peter.ujfalusi@ti.com>
+ */
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/slab.h>
+#include <linux/soc/renesas/r9a06g032-sysctrl.h>
+
+#define RZN1_DMAMUX_LINES 64
+#define RZN1_DMAMUX_SPLIT 16
+
+struct rzn1_dmamux_data {
+	struct dma_router dmarouter;
+	u32 used_chans;
+	struct mutex lock;
+};
+
+struct rzn1_dmamux_map {
+	unsigned int req_idx;
+};
+
+static void rzn1_dmamux_free(struct device *dev, void *route_data)
+{
+	struct rzn1_dmamux_data *dmamux = dev_get_drvdata(dev);
+	struct rzn1_dmamux_map *map = route_data;
+
+	dev_dbg(dev, "Unmapping DMAMUX request %u\n", map->req_idx);
+
+	mutex_lock(&dmamux->lock);
+	dmamux->used_chans &= ~BIT(map->req_idx);
+	mutex_unlock(&dmamux->lock);
+
+	kfree(map);
+}
+
+static void *rzn1_dmamux_route_allocate(struct of_phandle_args *dma_spec,
+					struct of_dma *ofdma)
+{
+	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
+	struct rzn1_dmamux_data *dmamux = platform_get_drvdata(pdev);
+	struct rzn1_dmamux_map *map;
+	unsigned int dmac_idx, chan, val;
+	u32 mask;
+	int ret;
+
+	map = kzalloc(sizeof(*map), GFP_KERNEL);
+	if (!map)
+		return ERR_PTR(-ENOMEM);
+
+	if (dma_spec->args_count != 6) {
+		kfree(map);
+		return ERR_PTR(-EINVAL);
+	}
+
+	chan = dma_spec->args[0];
+	map->req_idx = dma_spec->args[4];
+	val = dma_spec->args[5];
+	dma_spec->args_count -= 2;
+
+	if (chan >= RZN1_DMAMUX_SPLIT) {
+		kfree(map);
+		dev_err(&pdev->dev, "Invalid DMA request line: %u\n", chan);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (map->req_idx >= RZN1_DMAMUX_LINES ||
+	    (map->req_idx % RZN1_DMAMUX_SPLIT) != chan) {
+		kfree(map);
+		dev_err(&pdev->dev, "Invalid MUX request line: %u\n", map->req_idx);
+		return ERR_PTR(-EINVAL);
+	}
+
+	dmac_idx = map->req_idx < RZN1_DMAMUX_SPLIT ? 0 : 1;
+	dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", dmac_idx);
+	if (!dma_spec->np) {
+		kfree(map);
+		dev_err(&pdev->dev, "Can't get DMA master\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	dev_dbg(&pdev->dev, "Mapping DMAMUX request %u to DMAC%u request %u\n",
+		map->req_idx, dmac_idx, chan);
+
+	mask = BIT(map->req_idx);
+	mutex_lock(&dmamux->lock);
+	dmamux->used_chans |= mask;
+	ret = r9a06g032_sysctrl_set_dmamux(mask, val ? mask : 0);
+	mutex_unlock(&dmamux->lock);
+	if (ret) {
+		rzn1_dmamux_free(&pdev->dev, map);
+		return ERR_PTR(ret);
+	}
+
+	return map;
+}
+
+static const struct of_device_id rzn1_dmac_match[] = {
+	{ .compatible = "renesas,rzn1-dma" },
+	{}
+};
+
+static int rzn1_dmamux_probe(struct platform_device *pdev)
+{
+	struct device_node *mux_node = pdev->dev.of_node;
+	const struct of_device_id *match;
+	struct device_node *dmac_node;
+	struct rzn1_dmamux_data *dmamux;
+
+	dmamux = devm_kzalloc(&pdev->dev, sizeof(*dmamux), GFP_KERNEL);
+	if (!dmamux)
+		return -ENOMEM;
+
+	mutex_init(&dmamux->lock);
+
+	dmac_node = of_parse_phandle(mux_node, "dma-masters", 0);
+	if (!dmac_node)
+		return dev_err_probe(&pdev->dev, -ENODEV, "Can't get DMA master node\n");
+
+	match = of_match_node(rzn1_dmac_match, dmac_node);
+	of_node_put(dmac_node);
+	if (!match)
+		return dev_err_probe(&pdev->dev, -EINVAL, "DMA master is not supported\n");
+
+	dmamux->dmarouter.dev = &pdev->dev;
+	dmamux->dmarouter.route_free = rzn1_dmamux_free;
+
+	platform_set_drvdata(pdev, dmamux);
+
+	return of_dma_router_register(mux_node, rzn1_dmamux_route_allocate,
+				      &dmamux->dmarouter);
+}
+
+static const struct of_device_id rzn1_dmamux_match[] = {
+	{ .compatible = "renesas,rzn1-dmamux" },
+	{}
+};
+
+static struct platform_driver rzn1_dmamux_driver = {
+	.driver = {
+		.name = "renesas,rzn1-dmamux",
+		.of_match_table = rzn1_dmamux_match,
+	},
+	.probe	= rzn1_dmamux_probe,
+};
+module_platform_driver(rzn1_dmamux_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com");
+MODULE_DESCRIPTION("Renesas RZ/N1 DMAMUX driver");