| Message ID | 20220404133904.1296258-6-miquel.raynal@bootlin.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | RZN1 DMA support | expand |
On Mon, 4 Apr 2022, Miquel Raynal wrote: > The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional > dmamux register located in the system control area which can take up to > 32 requests (16 per DMA controller). Each DMA channel can be wired to > two different peripherals. > > We need two additional information from the 'dmas' property: the channel > (bit in the dmamux register) that must be accessed and the value of the > mux for this channel. > > Aside from the driver introduction, as these devices are described as > subnodes of the system controller, we also need the system controller > (clock) driver to populate its children manually. Starting from now on, > one child can be the dmamux. > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > --- > +static void *rzn1_dmamux_route_allocate(struct of_phandle_args *dma_spec, > + struct of_dma *ofdma) > +{ > + struct platform_device *pdev = of_find_device_by_node(ofdma->of_node); > + struct rzn1_dmamux_data *dmamux = platform_get_drvdata(pdev); > + struct rzn1_dmamux_map *map; > + unsigned int dmac_idx, chan, val; > + u32 mask; > + int ret; > + > + if (dma_spec->args_count != 6) > + return ERR_PTR(-EINVAL); > + > + map = kzalloc(sizeof(*map), GFP_KERNEL); > + if (!map) > + return ERR_PTR(-ENOMEM); > + > + chan = dma_spec->args[0]; > + map->req_idx = dma_spec->args[4]; > + val = dma_spec->args[5]; > + dma_spec->args_count -= 2; > + > + if (chan >= RZN1_DMAMUX_SPLIT) { > + dev_err(&pdev->dev, "Invalid DMA request line: %u\n", chan); > + ret = -EINVAL; > + goto free_map; > + } > + > + if (map->req_idx >= RZN1_DMAMUX_LINES || > + (map->req_idx % RZN1_DMAMUX_SPLIT) != chan) { > + dev_err(&pdev->dev, "Invalid MUX request line: %u\n", map->req_idx); > + ret = -EINVAL; > + goto free_map; > + } > + > + dmac_idx = map->req_idx < RZN1_DMAMUX_SPLIT ? 0 : 1; > + dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", dmac_idx); > + if (!dma_spec->np) { > + dev_err(&pdev->dev, "Can't get DMA master\n"); > + ret = -EINVAL; > + goto free_map; > + } > + > + dev_dbg(&pdev->dev, "Mapping DMAMUX request %u to DMAC%u request %u\n", > + map->req_idx, dmac_idx, chan); > + > + mask = BIT(map->req_idx); > + mutex_lock(&dmamux->lock); > + dmamux->used_chans |= mask; > + ret = r9a06g032_sysctrl_set_dmamux(mask, val ? mask : 0); > + mutex_unlock(&dmamux->lock); > + if (ret) > + goto free_mux; Move this check before the unlock. Then free_mux path doesn't need to do (re)lock as the mutex is still held. You might also want to consider renaming the label e.g. to chan_release_and_unlock. > + > + return map; > + > +free_mux: > + mutex_lock(&dmamux->lock); > + dmamux->used_chans &= ~mask; > + mutex_unlock(&dmamux->lock); > +free_map: > + kfree(map); > + > + return ERR_PTR(ret); > +}
On 04-04-22, 15:39, Miquel Raynal wrote: > The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional > dmamux register located in the system control area which can take up to > 32 requests (16 per DMA controller). Each DMA channel can be wired to > two different peripherals. > > We need two additional information from the 'dmas' property: the channel > (bit in the dmamux register) that must be accessed and the value of the > mux for this channel. > > Aside from the driver introduction, as these devices are described as > subnodes of the system controller, we also need the system controller > (clock) driver to populate its children manually. Starting from now on, > one child can be the dmamux. > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > --- > drivers/clk/renesas/r9a06g032-clocks.c | 3 +- This should be a different patch, not in this... > +++ b/drivers/dma/dw/rzn1-dmamux.c > @@ -0,0 +1,157 @@ > +// SPDX-License-Identifier: GPL-2.0-only ... > + > +MODULE_LICENSE("GPL"); This is not consistent with the SPDX tag.. > +MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com"); > +MODULE_DESCRIPTION("Renesas RZ/N1 DMAMUX driver"); > -- > 2.27.0
On Tue, Apr 05, 2022 at 11:27:12AM +0530, Vinod Koul wrote: > On 04-04-22, 15:39, Miquel Raynal wrote: ... > > +MODULE_LICENSE("GPL"); > > This is not consistent with the SPDX tag.. Actually it is. "GPLv2" is obsolete form, in new code we are supposed using "GPL" as per Documentation.
On 05-04-22, 10:07, Andy Shevchenko wrote: > On Tue, Apr 05, 2022 at 11:27:12AM +0530, Vinod Koul wrote: > > On 04-04-22, 15:39, Miquel Raynal wrote: > > ... > > > > +MODULE_LICENSE("GPL"); > > > > This is not consistent with the SPDX tag.. > > Actually it is. "GPLv2" is obsolete form, in new code we are supposed using > "GPL" as per Documentation. Yes this has been updated, thanks for pointing out.
diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c index 052d99059981..1df56d7ab3e1 100644 --- a/drivers/clk/renesas/r9a06g032-clocks.c +++ b/drivers/clk/renesas/r9a06g032-clocks.c @@ -16,6 +16,7 @@ #include <linux/math64.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/pm_clock.h> #include <linux/pm_domain.h> @@ -996,7 +997,7 @@ static int __init r9a06g032_clocks_probe(struct platform_device *pdev) sysctrl_priv = clocks; - return 0; + return of_platform_populate(np, NULL, NULL, dev); } static const struct of_device_id r9a06g032_match[] = { diff --git a/drivers/dma/dw/Kconfig b/drivers/dma/dw/Kconfig index db25f9b7778c..a9828ddd6d06 100644 --- a/drivers/dma/dw/Kconfig +++ b/drivers/dma/dw/Kconfig @@ -16,6 +16,15 @@ config DW_DMAC Support the Synopsys DesignWare AHB DMA controller. This can be integrated in chips such as the Intel Cherrytrail. +config RZN1_DMAMUX + tristate "Renesas RZ/N1 DMAMUX driver" + depends on DW_DMAC + depends on ARCH_RZN1 || COMPILE_TEST + help + Support the Renesas RZ/N1 DMAMUX which is located in front of + the Synopsys DesignWare AHB DMA controller located on Renesas + SoCs. + config DW_DMAC_PCI tristate "Synopsys DesignWare AHB DMA PCI driver" depends on PCI diff --git a/drivers/dma/dw/Makefile b/drivers/dma/dw/Makefile index a6f358ad8591..8025f75e589c 100644 --- a/drivers/dma/dw/Makefile +++ b/drivers/dma/dw/Makefile @@ -7,5 +7,7 @@ obj-$(CONFIG_DW_DMAC) += dw_dmac.o dw_dmac-y := platform.o dw_dmac-$(CONFIG_OF) += of.o +obj-$(CONFIG_RZN1_DMAMUX) += rzn1-dmamux.o + obj-$(CONFIG_DW_DMAC_PCI) += dw_dmac_pci.o dw_dmac_pci-y := pci.o diff --git a/drivers/dma/dw/rzn1-dmamux.c b/drivers/dma/dw/rzn1-dmamux.c new file mode 100644 index 000000000000..29e4a0d86f8b --- /dev/null +++ b/drivers/dma/dw/rzn1-dmamux.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 Schneider-Electric + * Author: Miquel Raynal <miquel.raynal@bootlin.com + * Based on TI crossbar driver written by Peter Ujfalusi <peter.ujfalusi@ti.com> + */ +#include <linux/of_device.h> +#include <linux/of_dma.h> +#include <linux/slab.h> +#include <linux/soc/renesas/r9a06g032-sysctrl.h> + +#define RZN1_DMAMUX_LINES 64 +#define RZN1_DMAMUX_SPLIT 16 + +struct rzn1_dmamux_data { + struct dma_router dmarouter; + u32 used_chans; + struct mutex lock; +}; + +struct rzn1_dmamux_map { + unsigned int req_idx; +}; + +static void rzn1_dmamux_free(struct device *dev, void *route_data) +{ + struct rzn1_dmamux_data *dmamux = dev_get_drvdata(dev); + struct rzn1_dmamux_map *map = route_data; + + dev_dbg(dev, "Unmapping DMAMUX request %u\n", map->req_idx); + + mutex_lock(&dmamux->lock); + dmamux->used_chans &= ~BIT(map->req_idx); + mutex_unlock(&dmamux->lock); + + kfree(map); +} + +static void *rzn1_dmamux_route_allocate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + struct platform_device *pdev = of_find_device_by_node(ofdma->of_node); + struct rzn1_dmamux_data *dmamux = platform_get_drvdata(pdev); + struct rzn1_dmamux_map *map; + unsigned int dmac_idx, chan, val; + u32 mask; + int ret; + + if (dma_spec->args_count != 6) + return ERR_PTR(-EINVAL); + + map = kzalloc(sizeof(*map), GFP_KERNEL); + if (!map) + return ERR_PTR(-ENOMEM); + + chan = dma_spec->args[0]; + map->req_idx = dma_spec->args[4]; + val = dma_spec->args[5]; + dma_spec->args_count -= 2; + + if (chan >= RZN1_DMAMUX_SPLIT) { + dev_err(&pdev->dev, "Invalid DMA request line: %u\n", chan); + ret = -EINVAL; + goto free_map; + } + + if (map->req_idx >= RZN1_DMAMUX_LINES || + (map->req_idx % RZN1_DMAMUX_SPLIT) != chan) { + dev_err(&pdev->dev, "Invalid MUX request line: %u\n", map->req_idx); + ret = -EINVAL; + goto free_map; + } + + dmac_idx = map->req_idx < RZN1_DMAMUX_SPLIT ? 0 : 1; + dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", dmac_idx); + if (!dma_spec->np) { + dev_err(&pdev->dev, "Can't get DMA master\n"); + ret = -EINVAL; + goto free_map; + } + + dev_dbg(&pdev->dev, "Mapping DMAMUX request %u to DMAC%u request %u\n", + map->req_idx, dmac_idx, chan); + + mask = BIT(map->req_idx); + mutex_lock(&dmamux->lock); + dmamux->used_chans |= mask; + ret = r9a06g032_sysctrl_set_dmamux(mask, val ? mask : 0); + mutex_unlock(&dmamux->lock); + if (ret) + goto free_mux; + + return map; + +free_mux: + mutex_lock(&dmamux->lock); + dmamux->used_chans &= ~mask; + mutex_unlock(&dmamux->lock); +free_map: + kfree(map); + + return ERR_PTR(ret); +} + +static const struct of_device_id rzn1_dmac_match[] = { + { .compatible = "renesas,rzn1-dma" }, + {} +}; + +static int rzn1_dmamux_probe(struct platform_device *pdev) +{ + struct device_node *mux_node = pdev->dev.of_node; + const struct of_device_id *match; + struct device_node *dmac_node; + struct rzn1_dmamux_data *dmamux; + + dmamux = devm_kzalloc(&pdev->dev, sizeof(*dmamux), GFP_KERNEL); + if (!dmamux) + return -ENOMEM; + + mutex_init(&dmamux->lock); + + dmac_node = of_parse_phandle(mux_node, "dma-masters", 0); + if (!dmac_node) + return dev_err_probe(&pdev->dev, -ENODEV, "Can't get DMA master node\n"); + + match = of_match_node(rzn1_dmac_match, dmac_node); + of_node_put(dmac_node); + if (!match) + return dev_err_probe(&pdev->dev, -EINVAL, "DMA master is not supported\n"); + + dmamux->dmarouter.dev = &pdev->dev; + dmamux->dmarouter.route_free = rzn1_dmamux_free; + + platform_set_drvdata(pdev, dmamux); + + return of_dma_router_register(mux_node, rzn1_dmamux_route_allocate, + &dmamux->dmarouter); +} + +static const struct of_device_id rzn1_dmamux_match[] = { + { .compatible = "renesas,rzn1-dmamux" }, + {} +}; + +static struct platform_driver rzn1_dmamux_driver = { + .driver = { + .name = "renesas,rzn1-dmamux", + .of_match_table = rzn1_dmamux_match, + }, + .probe = rzn1_dmamux_probe, +}; +module_platform_driver(rzn1_dmamux_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com"); +MODULE_DESCRIPTION("Renesas RZ/N1 DMAMUX driver");
The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional dmamux register located in the system control area which can take up to 32 requests (16 per DMA controller). Each DMA channel can be wired to two different peripherals. We need two additional information from the 'dmas' property: the channel (bit in the dmamux register) that must be accessed and the value of the mux for this channel. Aside from the driver introduction, as these devices are described as subnodes of the system controller, we also need the system controller (clock) driver to populate its children manually. Starting from now on, one child can be the dmamux. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/clk/renesas/r9a06g032-clocks.c | 3 +- drivers/dma/dw/Kconfig | 9 ++ drivers/dma/dw/Makefile | 2 + drivers/dma/dw/rzn1-dmamux.c | 157 +++++++++++++++++++++++++ 4 files changed, 170 insertions(+), 1 deletion(-) create mode 100644 drivers/dma/dw/rzn1-dmamux.c