@@ -13,14 +13,14 @@ / {
#address-cells = <2>;
#size-cells = <2>;
- audio_clk1: audio_clk1 {
+ audio_clk1: clk-1 {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by boards that provide it */
clock-frequency = <0>;
};
- audio_clk2: audio_clk2 {
+ audio_clk2: clk-2 {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by boards that provide it */
@@ -28,14 +28,14 @@ audio_clk2: audio_clk2 {
};
/* External CAN clock - to be overridden by boards that provide it */
- can_clk: can {
+ can_clk: can-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
- extal_clk: extal {
+ extal_clk: extal-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
Add suffix '-clk' for can and extal clk node names and replace the clk node names audio_clk{1,2} with clk-{1,2} as per the device tree specification. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- v1->v2: * Replaced clk node names audio_clk{1,2} with clk-{1,2}. --- arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)