[v4,net-next,04/10] dt-bindings: net: dsa: microchip: add missing CPU port phy-mode to example

Commit Message

Vladimir Oltean Aug. 18, 2022, 11:54 a.m. UTC

The ksz_switch_chips[] element for KSZ9477 says that port 5 is an xMII
port and it supports speeds of 10/100/1000. The device tree example does
declare a fixed-link at 1000, and RGMII is the only one of those modes
that supports this speed, so use this phy-mode.

The microchip,ksz8565 compatible string is not supported by the
microchip driver, however on Microchip's product page it says that there
are 5 ports, 4 of which have internal PHYs and the 5th is an
MII/RMII/RGMII port. It's a bit strange that this is port@6, but it is
probably just the way it is. Select an RGMII phy-mode for this one as
well.

Signed-off-by: Vladimir Oltean <[e-mail]>
Acked-by: Rob Herring <[e-mail]>
---
v2->v3: patch is new
v3->v4: none

 Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml | 4 ++++
 1 file changed, 4 insertions(+)

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index 6bbd8145b6c1..456802affc9d 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -109,6 +109,8 @@  examples:
                     reg = <5>;
                     label = "cpu";
                     ethernet = <&eth0>;
+                    phy-mode = "rgmii";
+
                     fixed-link {
                         speed = <1000>;
                         full-duplex;
@@ -146,6 +148,8 @@  examples:
                     reg = <6>;
                     label = "cpu";
                     ethernet = <&eth0>;
+                    phy-mode = "rgmii";
+
                     fixed-link {
                         speed = <1000>;
                         full-duplex;