Message ID | 20220915181558.354737-9-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Geert Uytterhoeven |
Headers | show |
Series | Add support for Renesas RZ/Five SoC | expand |
On 15/09/2022 19:15, Prabhakar wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Enable the minimal blocks required for booting the Renesas RZ/Five > SMARC EVK with initramfs. > > Below are the blocks enabled: > - CPG > - CPU0 > - DDR (memory regions) > - PINCTRL > - PLIC > - SCIF0 > > Note we have deleted the nodes from the DT for which support needs to be > added for RZ/Five SoC and are enabled by RZ/G2UL SMARC EVK SoM/carrier > board DTS/I. idk, I am not sure what to think of this approach. What do you mean by "for which support needs to be added"? If the support does not exist yet, then is surely you can just add the nodes and it will be fine? Confused, Conor. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > v2->v3 > * Dropped RB tags from Conor and Geert > * Now re-using the SoM and carrier board DTS/I from RZ/G2UL > > v1->v2 > * New patch > --- > arch/riscv/boot/dts/Makefile | 1 + > arch/riscv/boot/dts/renesas/Makefile | 2 + > .../boot/dts/renesas/r9a07g043f01-smarc.dts | 27 +++++++++ > .../boot/dts/renesas/rzfive-smarc-som.dtsi | 42 ++++++++++++++ > arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi | 56 +++++++++++++++++++ > 5 files changed, 128 insertions(+) > create mode 100644 arch/riscv/boot/dts/renesas/Makefile > create mode 100644 arch/riscv/boot/dts/renesas/r9a07g043f01-smarc.dts > create mode 100644 arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi > create mode 100644 arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi > > diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile > index ff174996cdfd..b0ff5fbabb0c 100644 > --- a/arch/riscv/boot/dts/Makefile > +++ b/arch/riscv/boot/dts/Makefile > @@ -3,5 +3,6 @@ subdir-y += sifive > subdir-y += starfive > subdir-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += canaan > subdir-y += microchip > +subdir-y += renesas > > obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y)) > diff --git a/arch/riscv/boot/dts/renesas/Makefile b/arch/riscv/boot/dts/renesas/Makefile > new file mode 100644 > index 000000000000..2d3f5751a649 > --- /dev/null > +++ b/arch/riscv/boot/dts/renesas/Makefile > @@ -0,0 +1,2 @@ > +# SPDX-License-Identifier: GPL-2.0 > +dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043f01-smarc.dtb > diff --git a/arch/riscv/boot/dts/renesas/r9a07g043f01-smarc.dts b/arch/riscv/boot/dts/renesas/r9a07g043f01-smarc.dts > new file mode 100644 > index 000000000000..9747f30c5db5 > --- /dev/null > +++ b/arch/riscv/boot/dts/renesas/r9a07g043f01-smarc.dts > @@ -0,0 +1,27 @@ > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +/* > + * Device Tree Source for the RZ/Five SMARC EVK > + * > + * Copyright (C) 2022 Renesas Electronics Corp. > + */ > + > +/dts-v1/; > + > +/* > + * DIP-Switch SW1 setting > + * 1 : High; 0: Low > + * SW1-2 : SW_SD0_DEV_SEL (0: uSD; 1: eMMC) > + * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1) > + * Please change below macros according to SW1 setting on SoM > + */ > +#define SW_SW0_DEV_SEL 1 > +#define SW_ET0_EN_N 1 > + > +#include "r9a07g043.dtsi" > +#include "rzfive-smarc-som.dtsi" > +#include "rzfive-smarc.dtsi" > + > +/ { > + model = "Renesas SMARC EVK based on r9a07g043f01"; > + compatible = "renesas,smarc-evk", "renesas,r9a07g043f01", "renesas,r9a07g043"; > +}; > diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi > new file mode 100644 > index 000000000000..8547c273f140 > --- /dev/null > +++ b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi > @@ -0,0 +1,42 @@ > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +/* > + * Device Tree Source for the RZ/Five SMARC EVK SOM > + * > + * Copyright (C) 2022 Renesas Electronics Corp. > + */ > + > +#include <arm64/renesas/rzg2ul-smarc-som.dtsi> > + > +/ { > + aliases { > + /delete-property/ ethernet0; > + /delete-property/ ethernet1; > + }; > + > + chosen { > + bootargs = "ignore_loglevel"; > + }; > +}; > + > +#if (SW_SW0_DEV_SEL) > +/delete-node/ &adc; > +#endif > + > +#if (!SW_ET0_EN_N) > +/delete-node/ ð0; > +#endif > +/delete-node/ ð1; > + > +/delete-node/ &ostm1; > +/delete-node/ &ostm2; > + > +/delete-node/ ®_1p8v; > +/delete-node/ ®_3p3v; > + > +/delete-node/ &sdhi0; > + > +#if !(SW_SW0_DEV_SEL) > +/delete-node/ &vccq_sdhi0; > +#endif > + > +/delete-node/ &wdt0; > diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi > new file mode 100644 > index 000000000000..3fde7192241e > --- /dev/null > +++ b/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi > @@ -0,0 +1,56 @@ > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +/* > + * Device Tree Source for the RZ/Five SMARC EVK carrier board > + * > + * Copyright (C) 2022 Renesas Electronics Corp. > + */ > + > +#include <arm64/renesas/rzg2ul-smarc.dtsi> > + > +/ { > + aliases { > + /delete-property/ i2c0; > + /delete-property/ i2c1; > + }; > +}; > + > +/delete-node/ &audio_clk1; > +/delete-node/ &audio_clk2; > +/delete-node/ &audio_mclock; > + > +/delete-node/ &canfd; > + > +/delete-node/ &cpu_dai; > + > +/delete-node/ &ehci0; > +/delete-node/ &ehci1; > + > +/delete-node/ &hsusb; > + > +/delete-node/ &i2c0; > +/delete-node/ &i2c1; > + > +/delete-node/ &ohci0; > +/delete-node/ &ohci1; > + > +&pinctrl { > + /delete-property/ pinctrl-0; > + /delete-property/ pinctrl-names; > +}; > + > +/delete-node/ &phyrst; > + > +/delete-node/ &sdhi1; > + > +/delete-node/ &snd_rzg2l; > + > +/delete-node/ &spi1; > + > +/delete-node/ &ssi1; > + > +/delete-node/ &usb0_vbus_otg; > + > +/delete-node/ &usb2_phy0; > +/delete-node/ &usb2_phy1; > + > +/delete-node/ &vccq_sdhi1; > -- > 2.25.1 >
Hi Conor, Thank you for the review. On Thu, Sep 15, 2022 at 10:56 PM <Conor.Dooley@microchip.com> wrote: > > On 15/09/2022 19:15, Prabhakar wrote: > > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > > > Enable the minimal blocks required for booting the Renesas RZ/Five > > SMARC EVK with initramfs. > > > > Below are the blocks enabled: > > - CPG > > - CPU0 > > - DDR (memory regions) > > - PINCTRL > > - PLIC > > - SCIF0 > > > > Note we have deleted the nodes from the DT for which support needs to be > > added for RZ/Five SoC and are enabled by RZ/G2UL SMARC EVK SoM/carrier > > board DTS/I. > > idk, I am not sure what to think of this approach. > > What do you mean by "for which support needs to be added"? If the support > does not exist yet, then is surely you can just add the nodes and it will > be fine? > As pointed out previously, I am re-using the below files [1] (SoM) and [2] (Carrier board) as the RZ/Five SMARC EVK is pin compatible. Since [1] and [2] enable almost all the peripherals (status = okay) on the RZ/G2UL SMARC EVK which are supported. For example [1] enables SDHI0/1 this high speed block needs DMA and without cache management fixed on Andes core we cannot enable this on RZ/Five SoC so currently a placeholder is added for it in the RZ/FIve SoC DTSI and is deleted in the board DTS file. Below blocks suffer the cache management issue: - DMAC - ETH - SDHI - USB Rest of the blocks will be gradually enabled (as soon as this initial patchset is merged) along with the DT binding doc updates. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi?h=v6.0-rc5 [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi?h=v6.0-rc5 Cheers, Prabhakar
On 15/09/2022 23:41, Lad, Prabhakar wrote: > Hi Conor, > > Thank you for the review. > > On Thu, Sep 15, 2022 at 10:56 PM <Conor.Dooley@microchip.com> wrote: >> >> On 15/09/2022 19:15, Prabhakar wrote: >>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe >>> >>> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> >>> >>> Enable the minimal blocks required for booting the Renesas RZ/Five >>> SMARC EVK with initramfs. >>> >>> Below are the blocks enabled: >>> - CPG >>> - CPU0 >>> - DDR (memory regions) >>> - PINCTRL >>> - PLIC >>> - SCIF0 >>> >>> Note we have deleted the nodes from the DT for which support needs to be >>> added for RZ/Five SoC and are enabled by RZ/G2UL SMARC EVK SoM/carrier >>> board DTS/I. >> >> idk, I am not sure what to think of this approach. >> >> What do you mean by "for which support needs to be added"? If the support >> does not exist yet, then is surely you can just add the nodes and it will >> be fine? >> > As pointed out previously, I am re-using the below files [1] (SoM) and > [2] (Carrier board) as the RZ/Five SMARC EVK is pin compatible. Since > [1] and [2] enable almost all the peripherals (status = okay) on the > RZ/G2UL SMARC EVK which are supported. For example [1] enables SDHI0/1 > this high speed block needs DMA and without cache management fixed on > Andes core we cannot enable this on RZ/Five SoC so currently a > placeholder is added for it in the RZ/FIve SoC DTSI and is deleted in > the board DTS file. > > Below blocks suffer the cache management issue: > - DMAC > - ETH > - SDHI > - USB > > Rest of the blocks will be gradually enabled (as soon as this initial > patchset is merged) along with the DT binding doc updates. > > [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi?h=v6.0-rc5 > [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi?h=v6.0-rc5 Explanations are reasonable, but again - that information is important and really needs to be included in the commit message etc. Thanks, Conor.
On Thu, Sep 15, 2022 at 11:44 PM <Conor.Dooley@microchip.com> wrote: > > > > On 15/09/2022 23:41, Lad, Prabhakar wrote: > > Hi Conor, > > > > Thank you for the review. > > > > On Thu, Sep 15, 2022 at 10:56 PM <Conor.Dooley@microchip.com> wrote: > >> > >> On 15/09/2022 19:15, Prabhakar wrote: > >>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > >>> > >>> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > >>> > >>> Enable the minimal blocks required for booting the Renesas RZ/Five > >>> SMARC EVK with initramfs. > >>> > >>> Below are the blocks enabled: > >>> - CPG > >>> - CPU0 > >>> - DDR (memory regions) > >>> - PINCTRL > >>> - PLIC > >>> - SCIF0 > >>> > >>> Note we have deleted the nodes from the DT for which support needs to be > >>> added for RZ/Five SoC and are enabled by RZ/G2UL SMARC EVK SoM/carrier > >>> board DTS/I. > >> > >> idk, I am not sure what to think of this approach. > >> > >> What do you mean by "for which support needs to be added"? If the support > >> does not exist yet, then is surely you can just add the nodes and it will > >> be fine? > >> > > As pointed out previously, I am re-using the below files [1] (SoM) and > > [2] (Carrier board) as the RZ/Five SMARC EVK is pin compatible. Since > > [1] and [2] enable almost all the peripherals (status = okay) on the > > RZ/G2UL SMARC EVK which are supported. For example [1] enables SDHI0/1 > > this high speed block needs DMA and without cache management fixed on > > Andes core we cannot enable this on RZ/Five SoC so currently a > > placeholder is added for it in the RZ/FIve SoC DTSI and is deleted in > > the board DTS file. > > > > Below blocks suffer the cache management issue: > > - DMAC > > - ETH > > - SDHI > > - USB > > > > Rest of the blocks will be gradually enabled (as soon as this initial > > patchset is merged) along with the DT binding doc updates. > > > > [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi?h=v6.0-rc5 > > [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi?h=v6.0-rc5 > > > Explanations are reasonable, but again - that information is important > and really needs to be included in the commit message etc. > Sure, I will update the commit message while sending the v4. Cheers, Prabhakar
Hi Prabhakar, On Thu, Sep 15, 2022 at 8:17 PM Prabhakar <prabhakar.csengg@gmail.com> wrote: > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Enable the minimal blocks required for booting the Renesas RZ/Five > SMARC EVK with initramfs. > > Below are the blocks enabled: > - CPG > - CPU0 > - DDR (memory regions) > - PINCTRL > - PLIC > - SCIF0 > > Note we have deleted the nodes from the DT for which support needs to be > added for RZ/Five SoC and are enabled by RZ/G2UL SMARC EVK SoM/carrier > board DTS/I. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > v2->v3 > * Dropped RB tags from Conor and Geert > * Now re-using the SoM and carrier board DTS/I from RZ/G2UL Thanks for the update! > --- /dev/null > +++ b/arch/riscv/boot/dts/renesas/r9a07g043f01-smarc.dts > @@ -0,0 +1,27 @@ > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +/* > + * Device Tree Source for the RZ/Five SMARC EVK > + * > + * Copyright (C) 2022 Renesas Electronics Corp. > + */ > + > +/dts-v1/; > + > +/* > + * DIP-Switch SW1 setting > + * 1 : High; 0: Low > + * SW1-2 : SW_SD0_DEV_SEL (0: uSD; 1: eMMC) > + * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1) > + * Please change below macros according to SW1 setting on SoM "on the SoM" (like in r9a07g043u11-smarc.dts)? > --- /dev/null > +++ b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi > @@ -0,0 +1,42 @@ > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +/* > + * Device Tree Source for the RZ/Five SMARC EVK SOM > + * > + * Copyright (C) 2022 Renesas Electronics Corp. > + */ > + > +#include <arm64/renesas/rzg2ul-smarc-som.dtsi> > + > +/ { > + aliases { > + /delete-property/ ethernet0; > + /delete-property/ ethernet1; OK > + }; > + > + chosen { > + bootargs = "ignore_loglevel"; > + }; > +}; > + > +#if (SW_SW0_DEV_SEL) > +/delete-node/ &adc; > +#endif > + > +#if (!SW_ET0_EN_N) > +/delete-node/ ð0; > +#endif > +/delete-node/ ð1; > + > +/delete-node/ &ostm1; > +/delete-node/ &ostm2; Given they are all placeholders, do you really need to delete them? (more below) Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Hi Geert, Thank you for the review. On Tue, Sep 20, 2022 at 1:32 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > Hi Prabhakar, > > On Thu, Sep 15, 2022 at 8:17 PM Prabhakar <prabhakar.csengg@gmail.com> wrote: > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > > > Enable the minimal blocks required for booting the Renesas RZ/Five > > SMARC EVK with initramfs. > > > > Below are the blocks enabled: > > - CPG > > - CPU0 > > - DDR (memory regions) > > - PINCTRL > > - PLIC > > - SCIF0 > > > > Note we have deleted the nodes from the DT for which support needs to be > > added for RZ/Five SoC and are enabled by RZ/G2UL SMARC EVK SoM/carrier > > board DTS/I. > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > --- > > v2->v3 > > * Dropped RB tags from Conor and Geert > > * Now re-using the SoM and carrier board DTS/I from RZ/G2UL > > Thanks for the update! > > > --- /dev/null > > +++ b/arch/riscv/boot/dts/renesas/r9a07g043f01-smarc.dts > > @@ -0,0 +1,27 @@ > > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +/* > > + * Device Tree Source for the RZ/Five SMARC EVK > > + * > > + * Copyright (C) 2022 Renesas Electronics Corp. > > + */ > > + > > +/dts-v1/; > > + > > +/* > > + * DIP-Switch SW1 setting > > + * 1 : High; 0: Low > > + * SW1-2 : SW_SD0_DEV_SEL (0: uSD; 1: eMMC) > > + * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1) > > + * Please change below macros according to SW1 setting on SoM > > "on the SoM" (like in r9a07g043u11-smarc.dts)? > Agreed, I will update it. > > --- /dev/null > > +++ b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi > > @@ -0,0 +1,42 @@ > > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +/* > > + * Device Tree Source for the RZ/Five SMARC EVK SOM > > + * > > + * Copyright (C) 2022 Renesas Electronics Corp. > > + */ > > + > > +#include <arm64/renesas/rzg2ul-smarc-som.dtsi> > > + > > +/ { > > + aliases { > > + /delete-property/ ethernet0; > > + /delete-property/ ethernet1; > > OK > I assume you are OK with dropping the above too? > > + }; > > + > > + chosen { > > + bootargs = "ignore_loglevel"; > > + }; > > +}; > > + > > +#if (SW_SW0_DEV_SEL) > > +/delete-node/ &adc; > > +#endif > > + > > +#if (!SW_ET0_EN_N) > > +/delete-node/ ð0; > > +#endif > > +/delete-node/ ð1; > > + > > +/delete-node/ &ostm1; > > +/delete-node/ &ostm2; > > Given they are all placeholders, do you really need to delete them? > (more below) > I did retest without deleting the place holders and I dont see any issues (or splat) while booting up so I'll drop them while sending the v4. Cheers, Prabhakar
Hi Prabhakar, On Tue, Sep 20, 2022 at 3:05 PM Lad, Prabhakar <prabhakar.csengg@gmail.com> wrote: > On Tue, Sep 20, 2022 at 1:32 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > On Thu, Sep 15, 2022 at 8:17 PM Prabhakar <prabhakar.csengg@gmail.com> wrote: > > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > > > > > Enable the minimal blocks required for booting the Renesas RZ/Five > > > SMARC EVK with initramfs. > > > > > > Below are the blocks enabled: > > > - CPG > > > - CPU0 > > > - DDR (memory regions) > > > - PINCTRL > > > - PLIC > > > - SCIF0 > > > > > > Note we have deleted the nodes from the DT for which support needs to be > > > added for RZ/Five SoC and are enabled by RZ/G2UL SMARC EVK SoM/carrier > > > board DTS/I. > > > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > > --- /dev/null > > > +++ b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi > > > @@ -0,0 +1,42 @@ > > > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +/* > > > + * Device Tree Source for the RZ/Five SMARC EVK SOM > > > + * > > > + * Copyright (C) 2022 Renesas Electronics Corp. > > > + */ > > > + > > > +#include <arm64/renesas/rzg2ul-smarc-som.dtsi> > > > + > > > +/ { > > > + aliases { > > > + /delete-property/ ethernet0; > > > + /delete-property/ ethernet1; > > > > OK > > > I assume you are OK with dropping the above too? I did intend to delete these properties (hence the "OK"), as their presence may confuse U-Boot. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Hi Geert, On Tue, Sep 20, 2022 at 4:07 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > Hi Prabhakar, > > On Tue, Sep 20, 2022 at 3:05 PM Lad, Prabhakar > <prabhakar.csengg@gmail.com> wrote: > > On Tue, Sep 20, 2022 at 1:32 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > > On Thu, Sep 15, 2022 at 8:17 PM Prabhakar <prabhakar.csengg@gmail.com> wrote: > > > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > > > > > > > Enable the minimal blocks required for booting the Renesas RZ/Five > > > > SMARC EVK with initramfs. > > > > > > > > Below are the blocks enabled: > > > > - CPG > > > > - CPU0 > > > > - DDR (memory regions) > > > > - PINCTRL > > > > - PLIC > > > > - SCIF0 > > > > > > > > Note we have deleted the nodes from the DT for which support needs to be > > > > added for RZ/Five SoC and are enabled by RZ/G2UL SMARC EVK SoM/carrier > > > > board DTS/I. > > > > > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > > > > --- /dev/null > > > > +++ b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi > > > > @@ -0,0 +1,42 @@ > > > > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > > +/* > > > > + * Device Tree Source for the RZ/Five SMARC EVK SOM > > > > + * > > > > + * Copyright (C) 2022 Renesas Electronics Corp. > > > > + */ > > > > + > > > > +#include <arm64/renesas/rzg2ul-smarc-som.dtsi> > > > > + > > > > +/ { > > > > + aliases { > > > > + /delete-property/ ethernet0; > > > > + /delete-property/ ethernet1; > > > > > > OK > > > > > I assume you are OK with dropping the above too? > > I did intend to delete these properties (hence the "OK"), as their > presence may confuse U-Boot. > Thank you for the clarification. Cheers, Prabhakar
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile index ff174996cdfd..b0ff5fbabb0c 100644 --- a/arch/riscv/boot/dts/Makefile +++ b/arch/riscv/boot/dts/Makefile @@ -3,5 +3,6 @@ subdir-y += sifive subdir-y += starfive subdir-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += canaan subdir-y += microchip +subdir-y += renesas obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y)) diff --git a/arch/riscv/boot/dts/renesas/Makefile b/arch/riscv/boot/dts/renesas/Makefile new file mode 100644 index 000000000000..2d3f5751a649 --- /dev/null +++ b/arch/riscv/boot/dts/renesas/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043f01-smarc.dtb diff --git a/arch/riscv/boot/dts/renesas/r9a07g043f01-smarc.dts b/arch/riscv/boot/dts/renesas/r9a07g043f01-smarc.dts new file mode 100644 index 000000000000..9747f30c5db5 --- /dev/null +++ b/arch/riscv/boot/dts/renesas/r9a07g043f01-smarc.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/Five SMARC EVK + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/dts-v1/; + +/* + * DIP-Switch SW1 setting + * 1 : High; 0: Low + * SW1-2 : SW_SD0_DEV_SEL (0: uSD; 1: eMMC) + * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1) + * Please change below macros according to SW1 setting on SoM + */ +#define SW_SW0_DEV_SEL 1 +#define SW_ET0_EN_N 1 + +#include "r9a07g043.dtsi" +#include "rzfive-smarc-som.dtsi" +#include "rzfive-smarc.dtsi" + +/ { + model = "Renesas SMARC EVK based on r9a07g043f01"; + compatible = "renesas,smarc-evk", "renesas,r9a07g043f01", "renesas,r9a07g043"; +}; diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi new file mode 100644 index 000000000000..8547c273f140 --- /dev/null +++ b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/Five SMARC EVK SOM + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include <arm64/renesas/rzg2ul-smarc-som.dtsi> + +/ { + aliases { + /delete-property/ ethernet0; + /delete-property/ ethernet1; + }; + + chosen { + bootargs = "ignore_loglevel"; + }; +}; + +#if (SW_SW0_DEV_SEL) +/delete-node/ &adc; +#endif + +#if (!SW_ET0_EN_N) +/delete-node/ ð0; +#endif +/delete-node/ ð1; + +/delete-node/ &ostm1; +/delete-node/ &ostm2; + +/delete-node/ ®_1p8v; +/delete-node/ ®_3p3v; + +/delete-node/ &sdhi0; + +#if !(SW_SW0_DEV_SEL) +/delete-node/ &vccq_sdhi0; +#endif + +/delete-node/ &wdt0; diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi new file mode 100644 index 000000000000..3fde7192241e --- /dev/null +++ b/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/Five SMARC EVK carrier board + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include <arm64/renesas/rzg2ul-smarc.dtsi> + +/ { + aliases { + /delete-property/ i2c0; + /delete-property/ i2c1; + }; +}; + +/delete-node/ &audio_clk1; +/delete-node/ &audio_clk2; +/delete-node/ &audio_mclock; + +/delete-node/ &canfd; + +/delete-node/ &cpu_dai; + +/delete-node/ &ehci0; +/delete-node/ &ehci1; + +/delete-node/ &hsusb; + +/delete-node/ &i2c0; +/delete-node/ &i2c1; + +/delete-node/ &ohci0; +/delete-node/ &ohci1; + +&pinctrl { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; +}; + +/delete-node/ &phyrst; + +/delete-node/ &sdhi1; + +/delete-node/ &snd_rzg2l; + +/delete-node/ &spi1; + +/delete-node/ &ssi1; + +/delete-node/ &usb0_vbus_otg; + +/delete-node/ &usb2_phy0; +/delete-node/ &usb2_phy1; + +/delete-node/ &vccq_sdhi1;