diff mbox series

[v4,06/10] riscv: dts: renesas: Add initial devicetree for Renesas RZ/Five SoC

Message ID 20220920184904.90495-7-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series Add support for Renesas RZ/Five SoC | expand

Commit Message

Lad, Prabhakar Sept. 20, 2022, 6:49 p.m. UTC
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Add initial device tree for Renesas RZ/Five RISC-V CPU Core (AX45MP
Single).

Below is the list of IP blocks added in the initial SoC DTSI which can be
used to boot via initramfs on RZ/Five SMARC EVK:
- AX45MP CPU
- CPG
- PINCTRL
- PLIC
- SCIF0
- SYSC

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
v3 -> v4
* No change

v2 -> v3
* Fixed clock entry for CPU core
* Fixed timebase frequency to 12MHz
* Fixed sorting of the nodes
* Included RB tags

v1 -> v2
* Dropped including makefile change
* Updated ndev count
---
 arch/riscv/boot/dts/renesas/r9a07g043.dtsi | 120 +++++++++++++++++++++
 1 file changed, 120 insertions(+)
 create mode 100644 arch/riscv/boot/dts/renesas/r9a07g043.dtsi
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/renesas/r9a07g043.dtsi b/arch/riscv/boot/dts/renesas/r9a07g043.dtsi
new file mode 100644
index 000000000000..fb6733f3cc2b
--- /dev/null
+++ b/arch/riscv/boot/dts/renesas/r9a07g043.dtsi
@@ -0,0 +1,120 @@ 
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/r9a07g043-cpg.h>
+
+/ {
+	compatible = "renesas,r9a07g043";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <12000000>;
+
+		ax45mp: cpu@0 {
+			compatible = "andestech,ax45mp", "riscv";
+			device_type = "cpu";
+			reg = <0x0>;
+			status = "okay";
+			riscv,isa = "rv64imafdc";
+			mmu-type = "riscv,sv39";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <0x40>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <0x40>;
+			clocks = <&cpg CPG_CORE R9A07G043_CLK_I>;
+
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+	};
+
+	/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+	extal_clk: extal-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scif0: serial@1004b800 {
+			compatible = "renesas,scif-r9a07g043",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004b800 0 0x400>;
+			interrupts = <412 IRQ_TYPE_LEVEL_HIGH>,
+				     <414 IRQ_TYPE_LEVEL_HIGH>,
+				     <415 IRQ_TYPE_LEVEL_HIGH>,
+				     <413 IRQ_TYPE_LEVEL_HIGH>,
+				     <416 IRQ_TYPE_LEVEL_HIGH>,
+				     <416 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCIF0_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@11010000 {
+			compatible = "renesas,r9a07g043-cpg";
+			reg = <0 0x11010000 0 0x10000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@11020000 {
+			compatible = "renesas,r9a07g043-sysc";
+			reg = <0 0x11020000 0 0x10000>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@11030000 {
+			compatible = "renesas,r9a07g043-pinctrl";
+			reg = <0 0x11030000 0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			gpio-ranges = <&pinctrl 0 0 152>;
+			clocks = <&cpg CPG_MOD R9A07G043_GPIO_HCLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_GPIO_RSTN>,
+				 <&cpg R9A07G043_GPIO_PORT_RESETN>,
+				 <&cpg R9A07G043_GPIO_SPARE_RESETN>;
+		};
+
+		plic: interrupt-controller@12c00000 {
+			compatible = "renesas,r9a07g043-plic", "andestech,nceplic100";
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			riscv,ndev = <512>;
+			interrupt-controller;
+			reg = <0x0 0x12c00000 0 0x400000>;
+			clocks = <&cpg CPG_MOD R9A07G043_NCEPLIC_ACLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_NCEPLIC_ARESETN>;
+			interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9>;
+		};
+	};
+};