diff mbox series

media: i2c: ov5645: Use runtime PM

Message ID 20220927201634.750141-1-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State New
Delegated to: Kieran Bingham
Headers show
Series media: i2c: ov5645: Use runtime PM | expand

Commit Message

Lad, Prabhakar Sept. 27, 2022, 8:16 p.m. UTC
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Switch to using runtime PM for power management.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/media/i2c/Kconfig  |   2 +-
 drivers/media/i2c/ov5645.c | 135 +++++++++++++++++++------------------
 2 files changed, 69 insertions(+), 68 deletions(-)

Comments

Lad, Prabhakar Oct. 10, 2022, 8:04 p.m. UTC | #1
Hi,

On Tue, Sep 27, 2022 at 9:16 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
>
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Switch to using runtime PM for power management.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
>  drivers/media/i2c/Kconfig  |   2 +-
>  drivers/media/i2c/ov5645.c | 135 +++++++++++++++++++------------------
>  2 files changed, 69 insertions(+), 68 deletions(-)
>
I know it's too early, but I dont want to miss the v6.2 window for
RZ/G2L CRU driver [0].

Gentle ping for review.

[0] https://patchwork.kernel.org/project/linux-renesas-soc/cover/20221004234343.54777-1-prabhakar.mahadev-lad.rj@bp.renesas.com/

Cheers,
Prabhakar

> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 7806d4b81716..c0edd1017fe8 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -459,7 +459,7 @@ config VIDEO_OV5640
>  config VIDEO_OV5645
>         tristate "OmniVision OV5645 sensor support"
>         depends on OF
> -       depends on I2C && VIDEO_DEV
> +       depends on I2C && PM && VIDEO_DEV
>         select MEDIA_CONTROLLER
>         select VIDEO_V4L2_SUBDEV_API
>         select V4L2_FWNODE
> diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
> index 81e4e87e1821..3c3b30338328 100644
> --- a/drivers/media/i2c/ov5645.c
> +++ b/drivers/media/i2c/ov5645.c
> @@ -27,6 +27,7 @@
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_graph.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/slab.h>
>  #include <linux/types.h>
> @@ -108,7 +109,6 @@ struct ov5645 {
>         u8 timing_tc_reg21;
>
>         struct mutex power_lock; /* lock to protect power state */
> -       int power_count;
>
>         struct gpio_desc *enable_gpio;
>         struct gpio_desc *rst_gpio;
> @@ -635,8 +635,24 @@ static int ov5645_set_register_array(struct ov5645 *ov5645,
>         return 0;
>  }
>
> -static int ov5645_set_power_on(struct ov5645 *ov5645)
> +static int ov5645_set_power_off(struct device *dev)
>  {
> +       struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +       struct ov5645 *ov5645 = to_ov5645(sd);
> +
> +       ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58);
> +       gpiod_set_value_cansleep(ov5645->rst_gpio, 1);
> +       gpiod_set_value_cansleep(ov5645->enable_gpio, 0);
> +       clk_disable_unprepare(ov5645->xclk);
> +       regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
> +
> +       return 0;
> +}
> +
> +static int ov5645_set_power_on(struct device *dev)
> +{
> +       struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +       struct ov5645 *ov5645 = to_ov5645(sd);
>         int ret;
>
>         ret = regulator_bulk_enable(OV5645_NUM_SUPPLIES, ov5645->supplies);
> @@ -658,57 +674,19 @@ static int ov5645_set_power_on(struct ov5645 *ov5645)
>
>         msleep(20);
>
> -       return 0;
> -}
> -
> -static void ov5645_set_power_off(struct ov5645 *ov5645)
> -{
> -       gpiod_set_value_cansleep(ov5645->rst_gpio, 1);
> -       gpiod_set_value_cansleep(ov5645->enable_gpio, 0);
> -       clk_disable_unprepare(ov5645->xclk);
> -       regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
> -}
> -
> -static int ov5645_s_power(struct v4l2_subdev *sd, int on)
> -{
> -       struct ov5645 *ov5645 = to_ov5645(sd);
> -       int ret = 0;
> -
> -       mutex_lock(&ov5645->power_lock);
> -
> -       /* If the power count is modified from 0 to != 0 or from != 0 to 0,
> -        * update the power state.
> -        */
> -       if (ov5645->power_count == !on) {
> -               if (on) {
> -                       ret = ov5645_set_power_on(ov5645);
> -                       if (ret < 0)
> -                               goto exit;
> -
> -                       ret = ov5645_set_register_array(ov5645,
> -                                       ov5645_global_init_setting,
> +       ret = ov5645_set_register_array(ov5645, ov5645_global_init_setting,
>                                         ARRAY_SIZE(ov5645_global_init_setting));
> -                       if (ret < 0) {
> -                               dev_err(ov5645->dev,
> -                                       "could not set init registers\n");
> -                               ov5645_set_power_off(ov5645);
> -                               goto exit;
> -                       }
> -
> -                       usleep_range(500, 1000);
> -               } else {
> -                       ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58);
> -                       ov5645_set_power_off(ov5645);
> -               }
> +       if (ret < 0) {
> +               dev_err(ov5645->dev, "could not set init registers\n");
> +               goto exit;
>         }
>
> -       /* Update the power count. */
> -       ov5645->power_count += on ? 1 : -1;
> -       WARN_ON(ov5645->power_count < 0);
> +       usleep_range(500, 1000);
>
> -exit:
> -       mutex_unlock(&ov5645->power_lock);
> +       return 0;
>
> +exit:
> +       ov5645_set_power_off(dev);
>         return ret;
>  }
>
> @@ -795,7 +773,7 @@ static int ov5645_s_ctrl(struct v4l2_ctrl *ctrl)
>         int ret;
>
>         mutex_lock(&ov5645->power_lock);
> -       if (!ov5645->power_count) {
> +       if (!pm_runtime_get_if_in_use(ov5645->dev)) {
>                 mutex_unlock(&ov5645->power_lock);
>                 return 0;
>         }
> @@ -827,6 +805,7 @@ static int ov5645_s_ctrl(struct v4l2_ctrl *ctrl)
>                 break;
>         }
>
> +       pm_runtime_put_autosuspend(ov5645->dev);
>         mutex_unlock(&ov5645->power_lock);
>
>         return ret;
> @@ -991,6 +970,10 @@ static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
>         int ret;
>
>         if (enable) {
> +               ret = pm_runtime_resume_and_get(ov5645->dev);
> +               if (ret < 0)
> +                       return ret;
> +
>                 ret = ov5645_set_register_array(ov5645,
>                                         ov5645->current_mode->data,
>                                         ov5645->current_mode->data_size);
> @@ -998,22 +981,22 @@ static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
>                         dev_err(ov5645->dev, "could not set mode %dx%d\n",
>                                 ov5645->current_mode->width,
>                                 ov5645->current_mode->height);
> -                       return ret;
> +                       goto err_rpm_put;
>                 }
>                 ret = v4l2_ctrl_handler_setup(&ov5645->ctrls);
>                 if (ret < 0) {
>                         dev_err(ov5645->dev, "could not sync v4l2 controls\n");
> -                       return ret;
> +                       goto err_rpm_put;
>                 }
>
>                 ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x45);
>                 if (ret < 0)
> -                       return ret;
> +                       goto err_rpm_put;
>
>                 ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0,
>                                        OV5645_SYSTEM_CTRL0_START);
>                 if (ret < 0)
> -                       return ret;
> +                       goto err_rpm_put;
>         } else {
>                 ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x40);
>                 if (ret < 0)
> @@ -1023,14 +1006,15 @@ static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
>                                        OV5645_SYSTEM_CTRL0_STOP);
>                 if (ret < 0)
>                         return ret;
> +               pm_runtime_put(ov5645->dev);
>         }
>
>         return 0;
> -}
>
> -static const struct v4l2_subdev_core_ops ov5645_core_ops = {
> -       .s_power = ov5645_s_power,
> -};
> +err_rpm_put:
> +       pm_runtime_put(ov5645->dev);
> +       return ret;
> +}
>
>  static const struct v4l2_subdev_video_ops ov5645_video_ops = {
>         .s_stream = ov5645_s_stream,
> @@ -1046,7 +1030,6 @@ static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = {
>  };
>
>  static const struct v4l2_subdev_ops ov5645_subdev_ops = {
> -       .core = &ov5645_core_ops,
>         .video = &ov5645_video_ops,
>         .pad = &ov5645_subdev_pad_ops,
>  };
> @@ -1188,11 +1171,9 @@ static int ov5645_probe(struct i2c_client *client)
>                 goto free_ctrl;
>         }
>
> -       ret = ov5645_s_power(&ov5645->sd, true);
> -       if (ret < 0) {
> -               dev_err(dev, "could not power up OV5645\n");
> +       ret = ov5645_set_power_on(dev);
> +       if (ret)
>                 goto free_entity;
> -       }
>
>         ret = ov5645_read_reg(ov5645, OV5645_CHIP_ID_HIGH, &chip_id_high);
>         if (ret < 0 || chip_id_high != OV5645_CHIP_ID_HIGH_BYTE) {
> @@ -1209,12 +1190,16 @@ static int ov5645_probe(struct i2c_client *client)
>
>         dev_info(dev, "OV5645 detected at address 0x%02x\n", client->addr);
>
> +       pm_runtime_set_active(dev);
> +       pm_runtime_get_noresume(dev);
> +       pm_runtime_enable(dev);
> +
>         ret = ov5645_read_reg(ov5645, OV5645_AEC_PK_MANUAL,
>                               &ov5645->aec_pk_manual);
>         if (ret < 0) {
>                 dev_err(dev, "could not read AEC/AGC mode\n");
>                 ret = -ENODEV;
> -               goto power_down;
> +               goto err_pm_runtime;
>         }
>
>         ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG20,
> @@ -1222,7 +1207,7 @@ static int ov5645_probe(struct i2c_client *client)
>         if (ret < 0) {
>                 dev_err(dev, "could not read vflip value\n");
>                 ret = -ENODEV;
> -               goto power_down;
> +               goto err_pm_runtime;
>         }
>
>         ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG21,
> @@ -1230,14 +1215,18 @@ static int ov5645_probe(struct i2c_client *client)
>         if (ret < 0) {
>                 dev_err(dev, "could not read hflip value\n");
>                 ret = -ENODEV;
> -               goto power_down;
> +               goto err_pm_runtime;
>         }
>
> -       ov5645_s_power(&ov5645->sd, false);
> +       pm_runtime_set_autosuspend_delay(dev, 1000);
> +       pm_runtime_use_autosuspend(dev);
> +       pm_runtime_put_autosuspend(dev);
>
>         ret = v4l2_async_register_subdev(&ov5645->sd);
>         if (ret < 0) {
>                 dev_err(dev, "could not register v4l2 device\n");
> +               pm_runtime_disable(dev);
> +               pm_runtime_set_suspended(dev);
>                 goto free_entity;
>         }
>
> @@ -1245,8 +1234,11 @@ static int ov5645_probe(struct i2c_client *client)
>
>         return 0;
>
> +err_pm_runtime:
> +       pm_runtime_disable(dev);
> +       pm_runtime_put_noidle(dev);
>  power_down:
> -       ov5645_s_power(&ov5645->sd, false);
> +       ov5645_set_power_off(dev);
>  free_entity:
>         media_entity_cleanup(&ov5645->sd.entity);
>  free_ctrl:
> @@ -1264,6 +1256,10 @@ static void ov5645_remove(struct i2c_client *client)
>         v4l2_async_unregister_subdev(&ov5645->sd);
>         media_entity_cleanup(&ov5645->sd.entity);
>         v4l2_ctrl_handler_free(&ov5645->ctrls);
> +       pm_runtime_disable(ov5645->dev);
> +       if (!pm_runtime_status_suspended(ov5645->dev))
> +               ov5645_set_power_off(ov5645->dev);
> +       pm_runtime_set_suspended(ov5645->dev);
>         mutex_destroy(&ov5645->power_lock);
>  }
>
> @@ -1279,10 +1275,15 @@ static const struct of_device_id ov5645_of_match[] = {
>  };
>  MODULE_DEVICE_TABLE(of, ov5645_of_match);
>
> +static const struct dev_pm_ops ov5645_pm_ops = {
> +       SET_RUNTIME_PM_OPS(ov5645_set_power_off, ov5645_set_power_on, NULL)
> +};
> +
>  static struct i2c_driver ov5645_i2c_driver = {
>         .driver = {
>                 .of_match_table = ov5645_of_match,
>                 .name  = "ov5645",
> +               .pm = &ov5645_pm_ops,
>         },
>         .probe_new = ov5645_probe,
>         .remove = ov5645_remove,
> --
> 2.25.1
>
Sakari Ailus Oct. 11, 2022, 8:02 a.m. UTC | #2
Hi Prabhakar,

On Mon, Oct 10, 2022 at 09:04:22PM +0100, Lad, Prabhakar wrote:
> Hi,
> 
> On Tue, Sep 27, 2022 at 9:16 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> >
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> >
> > Switch to using runtime PM for power management.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> >  drivers/media/i2c/Kconfig  |   2 +-
> >  drivers/media/i2c/ov5645.c | 135 +++++++++++++++++++------------------
> >  2 files changed, 69 insertions(+), 68 deletions(-)
> >
> I know it's too early, but I dont want to miss the v6.2 window for
> RZ/G2L CRU driver [0].
> 
> Gentle ping for review.

I'll check the patch now but will apply once we have -rc1 in media tree.
Lad, Prabhakar Oct. 11, 2022, 8:09 a.m. UTC | #3
Hi Sakari,

On Tue, Oct 11, 2022 at 9:02 AM Sakari Ailus
<sakari.ailus@linux.intel.com> wrote:
>
> Hi Prabhakar,
>
> On Mon, Oct 10, 2022 at 09:04:22PM +0100, Lad, Prabhakar wrote:
> > Hi,
> >
> > On Tue, Sep 27, 2022 at 9:16 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> > >
> > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > >
> > > Switch to using runtime PM for power management.
> > >
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > ---
> > >  drivers/media/i2c/Kconfig  |   2 +-
> > >  drivers/media/i2c/ov5645.c | 135 +++++++++++++++++++------------------
> > >  2 files changed, 69 insertions(+), 68 deletions(-)
> > >
> > I know it's too early, but I dont want to miss the v6.2 window for
> > RZ/G2L CRU driver [0].
> >
> > Gentle ping for review.
>
> I'll check the patch now but will apply once we have -rc1 in media tree.
>
Thanks!

Cheers,
Prabhakar
Sakari Ailus Oct. 11, 2022, 8:13 a.m. UTC | #4
Hi Prabhakar,

Thanks for the patch. It's great to see drivers moving to runtime PM!

On Tue, Sep 27, 2022 at 09:16:34PM +0100, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Switch to using runtime PM for power management.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
>  drivers/media/i2c/Kconfig  |   2 +-
>  drivers/media/i2c/ov5645.c | 135 +++++++++++++++++++------------------
>  2 files changed, 69 insertions(+), 68 deletions(-)
> 
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 7806d4b81716..c0edd1017fe8 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -459,7 +459,7 @@ config VIDEO_OV5640
>  config VIDEO_OV5645
>  	tristate "OmniVision OV5645 sensor support"
>  	depends on OF
> -	depends on I2C && VIDEO_DEV
> +	depends on I2C && PM && VIDEO_DEV
>  	select MEDIA_CONTROLLER
>  	select VIDEO_V4L2_SUBDEV_API
>  	select V4L2_FWNODE
> diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
> index 81e4e87e1821..3c3b30338328 100644
> --- a/drivers/media/i2c/ov5645.c
> +++ b/drivers/media/i2c/ov5645.c
> @@ -27,6 +27,7 @@
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_graph.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/slab.h>
>  #include <linux/types.h>
> @@ -108,7 +109,6 @@ struct ov5645 {
>  	u8 timing_tc_reg21;
>  
>  	struct mutex power_lock; /* lock to protect power state */
> -	int power_count;
>  
>  	struct gpio_desc *enable_gpio;
>  	struct gpio_desc *rst_gpio;
> @@ -635,8 +635,24 @@ static int ov5645_set_register_array(struct ov5645 *ov5645,
>  	return 0;
>  }
>  
> -static int ov5645_set_power_on(struct ov5645 *ov5645)
> +static int ov5645_set_power_off(struct device *dev)
>  {
> +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct ov5645 *ov5645 = to_ov5645(sd);
> +
> +	ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58);
> +	gpiod_set_value_cansleep(ov5645->rst_gpio, 1);
> +	gpiod_set_value_cansleep(ov5645->enable_gpio, 0);
> +	clk_disable_unprepare(ov5645->xclk);
> +	regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
> +
> +	return 0;
> +}
> +
> +static int ov5645_set_power_on(struct device *dev)
> +{
> +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct ov5645 *ov5645 = to_ov5645(sd);
>  	int ret;
>  
>  	ret = regulator_bulk_enable(OV5645_NUM_SUPPLIES, ov5645->supplies);
> @@ -658,57 +674,19 @@ static int ov5645_set_power_on(struct ov5645 *ov5645)
>  
>  	msleep(20);
>  
> -	return 0;
> -}
> -
> -static void ov5645_set_power_off(struct ov5645 *ov5645)
> -{
> -	gpiod_set_value_cansleep(ov5645->rst_gpio, 1);
> -	gpiod_set_value_cansleep(ov5645->enable_gpio, 0);
> -	clk_disable_unprepare(ov5645->xclk);
> -	regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
> -}
> -
> -static int ov5645_s_power(struct v4l2_subdev *sd, int on)
> -{
> -	struct ov5645 *ov5645 = to_ov5645(sd);
> -	int ret = 0;
> -
> -	mutex_lock(&ov5645->power_lock);
> -
> -	/* If the power count is modified from 0 to != 0 or from != 0 to 0,
> -	 * update the power state.
> -	 */
> -	if (ov5645->power_count == !on) {
> -		if (on) {
> -			ret = ov5645_set_power_on(ov5645);
> -			if (ret < 0)
> -				goto exit;
> -
> -			ret = ov5645_set_register_array(ov5645,
> -					ov5645_global_init_setting,
> +	ret = ov5645_set_register_array(ov5645, ov5645_global_init_setting,
>  					ARRAY_SIZE(ov5645_global_init_setting));
> -			if (ret < 0) {
> -				dev_err(ov5645->dev,
> -					"could not set init registers\n");
> -				ov5645_set_power_off(ov5645);
> -				goto exit;
> -			}
> -
> -			usleep_range(500, 1000);
> -		} else {
> -			ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58);
> -			ov5645_set_power_off(ov5645);
> -		}
> +	if (ret < 0) {
> +		dev_err(ov5645->dev, "could not set init registers\n");
> +		goto exit;
>  	}
>  
> -	/* Update the power count. */
> -	ov5645->power_count += on ? 1 : -1;
> -	WARN_ON(ov5645->power_count < 0);
> +	usleep_range(500, 1000);
>  
> -exit:
> -	mutex_unlock(&ov5645->power_lock);
> +	return 0;
>  
> +exit:
> +	ov5645_set_power_off(dev);
>  	return ret;
>  }
>  
> @@ -795,7 +773,7 @@ static int ov5645_s_ctrl(struct v4l2_ctrl *ctrl)
>  	int ret;
>  
>  	mutex_lock(&ov5645->power_lock);
> -	if (!ov5645->power_count) {
> +	if (!pm_runtime_get_if_in_use(ov5645->dev)) {
>  		mutex_unlock(&ov5645->power_lock);
>  		return 0;
>  	}
> @@ -827,6 +805,7 @@ static int ov5645_s_ctrl(struct v4l2_ctrl *ctrl)
>  		break;
>  	}
>  
> +	pm_runtime_put_autosuspend(ov5645->dev);
>  	mutex_unlock(&ov5645->power_lock);
>  
>  	return ret;
> @@ -991,6 +970,10 @@ static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
>  	int ret;
>  
>  	if (enable) {
> +		ret = pm_runtime_resume_and_get(ov5645->dev);
> +		if (ret < 0)
> +			return ret;
> +
>  		ret = ov5645_set_register_array(ov5645,
>  					ov5645->current_mode->data,
>  					ov5645->current_mode->data_size);
> @@ -998,22 +981,22 @@ static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
>  			dev_err(ov5645->dev, "could not set mode %dx%d\n",
>  				ov5645->current_mode->width,
>  				ov5645->current_mode->height);
> -			return ret;
> +			goto err_rpm_put;
>  		}
>  		ret = v4l2_ctrl_handler_setup(&ov5645->ctrls);
>  		if (ret < 0) {
>  			dev_err(ov5645->dev, "could not sync v4l2 controls\n");
> -			return ret;
> +			goto err_rpm_put;
>  		}
>  
>  		ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x45);
>  		if (ret < 0)
> -			return ret;
> +			goto err_rpm_put;
>  
>  		ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0,
>  				       OV5645_SYSTEM_CTRL0_START);
>  		if (ret < 0)
> -			return ret;
> +			goto err_rpm_put;
>  	} else {
>  		ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x40);
>  		if (ret < 0)
> @@ -1023,14 +1006,15 @@ static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
>  				       OV5645_SYSTEM_CTRL0_STOP);
>  		if (ret < 0)
>  			return ret;

Not a problem with this patch and should be addressed separately, but the
caller will just call s_stream(0) and will ignore the return value. You
could complain about the error but still should return 0 when disabling
streaming.

> +		pm_runtime_put(ov5645->dev);
>  	}
>  
>  	return 0;
> -}
>  
> -static const struct v4l2_subdev_core_ops ov5645_core_ops = {
> -	.s_power = ov5645_s_power,
> -};
> +err_rpm_put:
> +	pm_runtime_put(ov5645->dev);
> +	return ret;
> +}
>  
>  static const struct v4l2_subdev_video_ops ov5645_video_ops = {
>  	.s_stream = ov5645_s_stream,
> @@ -1046,7 +1030,6 @@ static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = {
>  };
>  
>  static const struct v4l2_subdev_ops ov5645_subdev_ops = {
> -	.core = &ov5645_core_ops,
>  	.video = &ov5645_video_ops,
>  	.pad = &ov5645_subdev_pad_ops,
>  };
> @@ -1188,11 +1171,9 @@ static int ov5645_probe(struct i2c_client *client)
>  		goto free_ctrl;
>  	}
>  
> -	ret = ov5645_s_power(&ov5645->sd, true);
> -	if (ret < 0) {
> -		dev_err(dev, "could not power up OV5645\n");
> +	ret = ov5645_set_power_on(dev);
> +	if (ret)
>  		goto free_entity;
> -	}
>  
>  	ret = ov5645_read_reg(ov5645, OV5645_CHIP_ID_HIGH, &chip_id_high);
>  	if (ret < 0 || chip_id_high != OV5645_CHIP_ID_HIGH_BYTE) {
> @@ -1209,12 +1190,16 @@ static int ov5645_probe(struct i2c_client *client)
>  
>  	dev_info(dev, "OV5645 detected at address 0x%02x\n", client->addr);
>  
> +	pm_runtime_set_active(dev);
> +	pm_runtime_get_noresume(dev);
> +	pm_runtime_enable(dev);
> +
>  	ret = ov5645_read_reg(ov5645, OV5645_AEC_PK_MANUAL,
>  			      &ov5645->aec_pk_manual);
>  	if (ret < 0) {
>  		dev_err(dev, "could not read AEC/AGC mode\n");
>  		ret = -ENODEV;
> -		goto power_down;
> +		goto err_pm_runtime;
>  	}
>  
>  	ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG20,
> @@ -1222,7 +1207,7 @@ static int ov5645_probe(struct i2c_client *client)
>  	if (ret < 0) {
>  		dev_err(dev, "could not read vflip value\n");
>  		ret = -ENODEV;
> -		goto power_down;
> +		goto err_pm_runtime;
>  	}
>  
>  	ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG21,
> @@ -1230,14 +1215,18 @@ static int ov5645_probe(struct i2c_client *client)
>  	if (ret < 0) {
>  		dev_err(dev, "could not read hflip value\n");
>  		ret = -ENODEV;
> -		goto power_down;
> +		goto err_pm_runtime;
>  	}
>  
> -	ov5645_s_power(&ov5645->sd, false);
> +	pm_runtime_set_autosuspend_delay(dev, 1000);
> +	pm_runtime_use_autosuspend(dev);
> +	pm_runtime_put_autosuspend(dev);

You can also do this after registering async subdev. That allows removing
err_pm_runtime label and the two lines below it.

>  
>  	ret = v4l2_async_register_subdev(&ov5645->sd);
>  	if (ret < 0) {
>  		dev_err(dev, "could not register v4l2 device\n");
> +		pm_runtime_disable(dev);
> +		pm_runtime_set_suspended(dev);
>  		goto free_entity;
>  	}
>  
> @@ -1245,8 +1234,11 @@ static int ov5645_probe(struct i2c_client *client)

Again not a problem in this patch, but ov5645_entity_init_cfg() call here
needs to be done before registering the async subdev.

This could be addressed in a separate patch. Up to you.

>  
>  	return 0;
>  
> +err_pm_runtime:
> +	pm_runtime_disable(dev);
> +	pm_runtime_put_noidle(dev);
>  power_down:
> -	ov5645_s_power(&ov5645->sd, false);
> +	ov5645_set_power_off(dev);
>  free_entity:
>  	media_entity_cleanup(&ov5645->sd.entity);
>  free_ctrl:
> @@ -1264,6 +1256,10 @@ static void ov5645_remove(struct i2c_client *client)
>  	v4l2_async_unregister_subdev(&ov5645->sd);
>  	media_entity_cleanup(&ov5645->sd.entity);
>  	v4l2_ctrl_handler_free(&ov5645->ctrls);
> +	pm_runtime_disable(ov5645->dev);
> +	if (!pm_runtime_status_suspended(ov5645->dev))
> +		ov5645_set_power_off(ov5645->dev);
> +	pm_runtime_set_suspended(ov5645->dev);
>  	mutex_destroy(&ov5645->power_lock);
>  }
>  
> @@ -1279,10 +1275,15 @@ static const struct of_device_id ov5645_of_match[] = {
>  };
>  MODULE_DEVICE_TABLE(of, ov5645_of_match);
>  
> +static const struct dev_pm_ops ov5645_pm_ops = {
> +	SET_RUNTIME_PM_OPS(ov5645_set_power_off, ov5645_set_power_on, NULL)
> +};
> +
>  static struct i2c_driver ov5645_i2c_driver = {
>  	.driver = {
>  		.of_match_table = ov5645_of_match,
>  		.name  = "ov5645",
> +		.pm = &ov5645_pm_ops,
>  	},
>  	.probe_new = ov5645_probe,
>  	.remove = ov5645_remove,
Lad, Prabhakar Oct. 11, 2022, 8:36 a.m. UTC | #5
Hi Sakari,

Thanks for the review. That was quick.

On Tue, Oct 11, 2022 at 9:14 AM Sakari Ailus
<sakari.ailus@linux.intel.com> wrote:
>
> Hi Prabhakar,
>
> Thanks for the patch. It's great to see drivers moving to runtime PM!
>
> On Tue, Sep 27, 2022 at 09:16:34PM +0100, Prabhakar wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> >
> > Switch to using runtime PM for power management.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> >  drivers/media/i2c/Kconfig  |   2 +-
> >  drivers/media/i2c/ov5645.c | 135 +++++++++++++++++++------------------
> >  2 files changed, 69 insertions(+), 68 deletions(-)
> >
> > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > index 7806d4b81716..c0edd1017fe8 100644
> > --- a/drivers/media/i2c/Kconfig
> > +++ b/drivers/media/i2c/Kconfig
> > @@ -459,7 +459,7 @@ config VIDEO_OV5640
> >  config VIDEO_OV5645
> >       tristate "OmniVision OV5645 sensor support"
> >       depends on OF
> > -     depends on I2C && VIDEO_DEV
> > +     depends on I2C && PM && VIDEO_DEV
> >       select MEDIA_CONTROLLER
> >       select VIDEO_V4L2_SUBDEV_API
> >       select V4L2_FWNODE
> > diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
> > index 81e4e87e1821..3c3b30338328 100644
> > --- a/drivers/media/i2c/ov5645.c
> > +++ b/drivers/media/i2c/ov5645.c
> > @@ -27,6 +27,7 @@
> >  #include <linux/module.h>
> >  #include <linux/of.h>
> >  #include <linux/of_graph.h>
> > +#include <linux/pm_runtime.h>
> >  #include <linux/regulator/consumer.h>
> >  #include <linux/slab.h>
> >  #include <linux/types.h>
> > @@ -108,7 +109,6 @@ struct ov5645 {
> >       u8 timing_tc_reg21;
> >
> >       struct mutex power_lock; /* lock to protect power state */
> > -     int power_count;
> >
> >       struct gpio_desc *enable_gpio;
> >       struct gpio_desc *rst_gpio;
> > @@ -635,8 +635,24 @@ static int ov5645_set_register_array(struct ov5645 *ov5645,
> >       return 0;
> >  }
> >
> > -static int ov5645_set_power_on(struct ov5645 *ov5645)
> > +static int ov5645_set_power_off(struct device *dev)
> >  {
> > +     struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > +     struct ov5645 *ov5645 = to_ov5645(sd);
> > +
> > +     ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58);
> > +     gpiod_set_value_cansleep(ov5645->rst_gpio, 1);
> > +     gpiod_set_value_cansleep(ov5645->enable_gpio, 0);
> > +     clk_disable_unprepare(ov5645->xclk);
> > +     regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
> > +
> > +     return 0;
> > +}
> > +
> > +static int ov5645_set_power_on(struct device *dev)
> > +{
> > +     struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > +     struct ov5645 *ov5645 = to_ov5645(sd);
> >       int ret;
> >
> >       ret = regulator_bulk_enable(OV5645_NUM_SUPPLIES, ov5645->supplies);
> > @@ -658,57 +674,19 @@ static int ov5645_set_power_on(struct ov5645 *ov5645)
> >
> >       msleep(20);
> >
> > -     return 0;
> > -}
> > -
> > -static void ov5645_set_power_off(struct ov5645 *ov5645)
> > -{
> > -     gpiod_set_value_cansleep(ov5645->rst_gpio, 1);
> > -     gpiod_set_value_cansleep(ov5645->enable_gpio, 0);
> > -     clk_disable_unprepare(ov5645->xclk);
> > -     regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
> > -}
> > -
> > -static int ov5645_s_power(struct v4l2_subdev *sd, int on)
> > -{
> > -     struct ov5645 *ov5645 = to_ov5645(sd);
> > -     int ret = 0;
> > -
> > -     mutex_lock(&ov5645->power_lock);
> > -
> > -     /* If the power count is modified from 0 to != 0 or from != 0 to 0,
> > -      * update the power state.
> > -      */
> > -     if (ov5645->power_count == !on) {
> > -             if (on) {
> > -                     ret = ov5645_set_power_on(ov5645);
> > -                     if (ret < 0)
> > -                             goto exit;
> > -
> > -                     ret = ov5645_set_register_array(ov5645,
> > -                                     ov5645_global_init_setting,
> > +     ret = ov5645_set_register_array(ov5645, ov5645_global_init_setting,
> >                                       ARRAY_SIZE(ov5645_global_init_setting));
> > -                     if (ret < 0) {
> > -                             dev_err(ov5645->dev,
> > -                                     "could not set init registers\n");
> > -                             ov5645_set_power_off(ov5645);
> > -                             goto exit;
> > -                     }
> > -
> > -                     usleep_range(500, 1000);
> > -             } else {
> > -                     ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58);
> > -                     ov5645_set_power_off(ov5645);
> > -             }
> > +     if (ret < 0) {
> > +             dev_err(ov5645->dev, "could not set init registers\n");
> > +             goto exit;
> >       }
> >
> > -     /* Update the power count. */
> > -     ov5645->power_count += on ? 1 : -1;
> > -     WARN_ON(ov5645->power_count < 0);
> > +     usleep_range(500, 1000);
> >
> > -exit:
> > -     mutex_unlock(&ov5645->power_lock);
> > +     return 0;
> >
> > +exit:
> > +     ov5645_set_power_off(dev);
> >       return ret;
> >  }
> >
> > @@ -795,7 +773,7 @@ static int ov5645_s_ctrl(struct v4l2_ctrl *ctrl)
> >       int ret;
> >
> >       mutex_lock(&ov5645->power_lock);
> > -     if (!ov5645->power_count) {
> > +     if (!pm_runtime_get_if_in_use(ov5645->dev)) {
> >               mutex_unlock(&ov5645->power_lock);
> >               return 0;
> >       }
> > @@ -827,6 +805,7 @@ static int ov5645_s_ctrl(struct v4l2_ctrl *ctrl)
> >               break;
> >       }
> >
> > +     pm_runtime_put_autosuspend(ov5645->dev);
> >       mutex_unlock(&ov5645->power_lock);
> >
> >       return ret;
> > @@ -991,6 +970,10 @@ static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
> >       int ret;
> >
> >       if (enable) {
> > +             ret = pm_runtime_resume_and_get(ov5645->dev);
> > +             if (ret < 0)
> > +                     return ret;
> > +
> >               ret = ov5645_set_register_array(ov5645,
> >                                       ov5645->current_mode->data,
> >                                       ov5645->current_mode->data_size);
> > @@ -998,22 +981,22 @@ static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
> >                       dev_err(ov5645->dev, "could not set mode %dx%d\n",
> >                               ov5645->current_mode->width,
> >                               ov5645->current_mode->height);
> > -                     return ret;
> > +                     goto err_rpm_put;
> >               }
> >               ret = v4l2_ctrl_handler_setup(&ov5645->ctrls);
> >               if (ret < 0) {
> >                       dev_err(ov5645->dev, "could not sync v4l2 controls\n");
> > -                     return ret;
> > +                     goto err_rpm_put;
> >               }
> >
> >               ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x45);
> >               if (ret < 0)
> > -                     return ret;
> > +                     goto err_rpm_put;
> >
> >               ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0,
> >                                      OV5645_SYSTEM_CTRL0_START);
> >               if (ret < 0)
> > -                     return ret;
> > +                     goto err_rpm_put;
> >       } else {
> >               ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x40);
> >               if (ret < 0)
> > @@ -1023,14 +1006,15 @@ static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
> >                                      OV5645_SYSTEM_CTRL0_STOP);
> >               if (ret < 0)
> >                       return ret;
>
> Not a problem with this patch and should be addressed separately, but the
> caller will just call s_stream(0) and will ignore the return value. You
> could complain about the error but still should return 0 when disabling
> streaming.
>
OK, I will create a separate patch on top of this.

> > +             pm_runtime_put(ov5645->dev);
> >       }
> >
> >       return 0;
> > -}
> >
> > -static const struct v4l2_subdev_core_ops ov5645_core_ops = {
> > -     .s_power = ov5645_s_power,
> > -};
> > +err_rpm_put:
> > +     pm_runtime_put(ov5645->dev);
> > +     return ret;
> > +}
> >
> >  static const struct v4l2_subdev_video_ops ov5645_video_ops = {
> >       .s_stream = ov5645_s_stream,
> > @@ -1046,7 +1030,6 @@ static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = {
> >  };
> >
> >  static const struct v4l2_subdev_ops ov5645_subdev_ops = {
> > -     .core = &ov5645_core_ops,
> >       .video = &ov5645_video_ops,
> >       .pad = &ov5645_subdev_pad_ops,
> >  };
> > @@ -1188,11 +1171,9 @@ static int ov5645_probe(struct i2c_client *client)
> >               goto free_ctrl;
> >       }
> >
> > -     ret = ov5645_s_power(&ov5645->sd, true);
> > -     if (ret < 0) {
> > -             dev_err(dev, "could not power up OV5645\n");
> > +     ret = ov5645_set_power_on(dev);
> > +     if (ret)
> >               goto free_entity;
> > -     }
> >
> >       ret = ov5645_read_reg(ov5645, OV5645_CHIP_ID_HIGH, &chip_id_high);
> >       if (ret < 0 || chip_id_high != OV5645_CHIP_ID_HIGH_BYTE) {
> > @@ -1209,12 +1190,16 @@ static int ov5645_probe(struct i2c_client *client)
> >
> >       dev_info(dev, "OV5645 detected at address 0x%02x\n", client->addr);
> >
> > +     pm_runtime_set_active(dev);
> > +     pm_runtime_get_noresume(dev);
> > +     pm_runtime_enable(dev);
> > +
> >       ret = ov5645_read_reg(ov5645, OV5645_AEC_PK_MANUAL,
> >                             &ov5645->aec_pk_manual);
> >       if (ret < 0) {
> >               dev_err(dev, "could not read AEC/AGC mode\n");
> >               ret = -ENODEV;
> > -             goto power_down;
> > +             goto err_pm_runtime;
> >       }
> >
> >       ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG20,
> > @@ -1222,7 +1207,7 @@ static int ov5645_probe(struct i2c_client *client)
> >       if (ret < 0) {
> >               dev_err(dev, "could not read vflip value\n");
> >               ret = -ENODEV;
> > -             goto power_down;
> > +             goto err_pm_runtime;
> >       }
> >
> >       ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG21,
> > @@ -1230,14 +1215,18 @@ static int ov5645_probe(struct i2c_client *client)
> >       if (ret < 0) {
> >               dev_err(dev, "could not read hflip value\n");
> >               ret = -ENODEV;
> > -             goto power_down;
> > +             goto err_pm_runtime;
> >       }
> >
> > -     ov5645_s_power(&ov5645->sd, false);
> > +     pm_runtime_set_autosuspend_delay(dev, 1000);
> > +     pm_runtime_use_autosuspend(dev);
> > +     pm_runtime_put_autosuspend(dev);
>
> You can also do this after registering async subdev. That allows removing
> err_pm_runtime label and the two lines below it.
>
Agreed, I'll move this after registering the subdev.

> >
> >       ret = v4l2_async_register_subdev(&ov5645->sd);
> >       if (ret < 0) {
> >               dev_err(dev, "could not register v4l2 device\n");
> > +             pm_runtime_disable(dev);
> > +             pm_runtime_set_suspended(dev);
> >               goto free_entity;
> >       }
> >
> > @@ -1245,8 +1234,11 @@ static int ov5645_probe(struct i2c_client *client)
>
> Again not a problem in this patch, but ov5645_entity_init_cfg() call here
> needs to be done before registering the async subdev.
>
> This could be addressed in a separate patch. Up to you.
>
OK, I'll create a seperate patch for this.

Cheers,
Prabhakar
Lad, Prabhakar Oct. 12, 2022, 6:55 p.m. UTC | #6
Hi Sakari,

On Tue, Oct 11, 2022 at 9:36 AM Lad, Prabhakar
<prabhakar.csengg@gmail.com> wrote:
>
> Hi Sakari,
>
> Thanks for the review. That was quick.
>
> On Tue, Oct 11, 2022 at 9:14 AM Sakari Ailus
> <sakari.ailus@linux.intel.com> wrote:
> >
> > Hi Prabhakar,
> >
> > Thanks for the patch. It's great to see drivers moving to runtime PM!
> >
> > On Tue, Sep 27, 2022 at 09:16:34PM +0100, Prabhakar wrote:
> > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > >
> > > Switch to using runtime PM for power management.
> > >
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > ---
> > >  drivers/media/i2c/Kconfig  |   2 +-
> > >  drivers/media/i2c/ov5645.c | 135 +++++++++++++++++++------------------
> > >  2 files changed, 69 insertions(+), 68 deletions(-)
> > >
> > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > > index 7806d4b81716..c0edd1017fe8 100644
> > > --- a/drivers/media/i2c/Kconfig
> > > +++ b/drivers/media/i2c/Kconfig
> > > @@ -459,7 +459,7 @@ config VIDEO_OV5640
> > >  config VIDEO_OV5645
> > >       tristate "OmniVision OV5645 sensor support"
> > >       depends on OF
> > > -     depends on I2C && VIDEO_DEV
> > > +     depends on I2C && PM && VIDEO_DEV
> > >       select MEDIA_CONTROLLER
> > >       select VIDEO_V4L2_SUBDEV_API
> > >       select V4L2_FWNODE
> > > diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
> > > index 81e4e87e1821..3c3b30338328 100644
> > > --- a/drivers/media/i2c/ov5645.c
> > > +++ b/drivers/media/i2c/ov5645.c
> > > @@ -27,6 +27,7 @@
> > >  #include <linux/module.h>
> > >  #include <linux/of.h>
> > >  #include <linux/of_graph.h>
> > > +#include <linux/pm_runtime.h>
> > >  #include <linux/regulator/consumer.h>
> > >  #include <linux/slab.h>
> > >  #include <linux/types.h>
> > > @@ -108,7 +109,6 @@ struct ov5645 {
> > >       u8 timing_tc_reg21;
> > >
> > >       struct mutex power_lock; /* lock to protect power state */
> > > -     int power_count;
> > >
> > >       struct gpio_desc *enable_gpio;
> > >       struct gpio_desc *rst_gpio;
> > > @@ -635,8 +635,24 @@ static int ov5645_set_register_array(struct ov5645 *ov5645,
> > >       return 0;
> > >  }
> > >
> > > -static int ov5645_set_power_on(struct ov5645 *ov5645)
> > > +static int ov5645_set_power_off(struct device *dev)
> > >  {
> > > +     struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > > +     struct ov5645 *ov5645 = to_ov5645(sd);
> > > +
> > > +     ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58);
> > > +     gpiod_set_value_cansleep(ov5645->rst_gpio, 1);
> > > +     gpiod_set_value_cansleep(ov5645->enable_gpio, 0);
> > > +     clk_disable_unprepare(ov5645->xclk);
> > > +     regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
> > > +
> > > +     return 0;
> > > +}
> > > +
> > > +static int ov5645_set_power_on(struct device *dev)
> > > +{
> > > +     struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > > +     struct ov5645 *ov5645 = to_ov5645(sd);
> > >       int ret;
> > >
> > >       ret = regulator_bulk_enable(OV5645_NUM_SUPPLIES, ov5645->supplies);
> > > @@ -658,57 +674,19 @@ static int ov5645_set_power_on(struct ov5645 *ov5645)
> > >
> > >       msleep(20);
> > >
> > > -     return 0;
> > > -}
> > > -
> > > -static void ov5645_set_power_off(struct ov5645 *ov5645)
> > > -{
> > > -     gpiod_set_value_cansleep(ov5645->rst_gpio, 1);
> > > -     gpiod_set_value_cansleep(ov5645->enable_gpio, 0);
> > > -     clk_disable_unprepare(ov5645->xclk);
> > > -     regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
> > > -}
> > > -
> > > -static int ov5645_s_power(struct v4l2_subdev *sd, int on)
> > > -{
> > > -     struct ov5645 *ov5645 = to_ov5645(sd);
> > > -     int ret = 0;
> > > -
> > > -     mutex_lock(&ov5645->power_lock);
> > > -
> > > -     /* If the power count is modified from 0 to != 0 or from != 0 to 0,
> > > -      * update the power state.
> > > -      */
> > > -     if (ov5645->power_count == !on) {
> > > -             if (on) {
> > > -                     ret = ov5645_set_power_on(ov5645);
> > > -                     if (ret < 0)
> > > -                             goto exit;
> > > -
> > > -                     ret = ov5645_set_register_array(ov5645,
> > > -                                     ov5645_global_init_setting,
> > > +     ret = ov5645_set_register_array(ov5645, ov5645_global_init_setting,
> > >                                       ARRAY_SIZE(ov5645_global_init_setting));
> > > -                     if (ret < 0) {
> > > -                             dev_err(ov5645->dev,
> > > -                                     "could not set init registers\n");
> > > -                             ov5645_set_power_off(ov5645);
> > > -                             goto exit;
> > > -                     }
> > > -
> > > -                     usleep_range(500, 1000);
> > > -             } else {
> > > -                     ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58);
> > > -                     ov5645_set_power_off(ov5645);
> > > -             }
> > > +     if (ret < 0) {
> > > +             dev_err(ov5645->dev, "could not set init registers\n");
> > > +             goto exit;
> > >       }
> > >
> > > -     /* Update the power count. */
> > > -     ov5645->power_count += on ? 1 : -1;
> > > -     WARN_ON(ov5645->power_count < 0);
> > > +     usleep_range(500, 1000);
> > >
> > > -exit:
> > > -     mutex_unlock(&ov5645->power_lock);
> > > +     return 0;
> > >
> > > +exit:
> > > +     ov5645_set_power_off(dev);
> > >       return ret;
> > >  }
> > >
> > > @@ -795,7 +773,7 @@ static int ov5645_s_ctrl(struct v4l2_ctrl *ctrl)
> > >       int ret;
> > >
> > >       mutex_lock(&ov5645->power_lock);
> > > -     if (!ov5645->power_count) {
> > > +     if (!pm_runtime_get_if_in_use(ov5645->dev)) {
> > >               mutex_unlock(&ov5645->power_lock);
> > >               return 0;
> > >       }
> > > @@ -827,6 +805,7 @@ static int ov5645_s_ctrl(struct v4l2_ctrl *ctrl)
> > >               break;
> > >       }
> > >
> > > +     pm_runtime_put_autosuspend(ov5645->dev);
> > >       mutex_unlock(&ov5645->power_lock);
> > >
> > >       return ret;
> > > @@ -991,6 +970,10 @@ static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
> > >       int ret;
> > >
> > >       if (enable) {
> > > +             ret = pm_runtime_resume_and_get(ov5645->dev);
> > > +             if (ret < 0)
> > > +                     return ret;
> > > +
> > >               ret = ov5645_set_register_array(ov5645,
> > >                                       ov5645->current_mode->data,
> > >                                       ov5645->current_mode->data_size);
> > > @@ -998,22 +981,22 @@ static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
> > >                       dev_err(ov5645->dev, "could not set mode %dx%d\n",
> > >                               ov5645->current_mode->width,
> > >                               ov5645->current_mode->height);
> > > -                     return ret;
> > > +                     goto err_rpm_put;
> > >               }
> > >               ret = v4l2_ctrl_handler_setup(&ov5645->ctrls);
> > >               if (ret < 0) {
> > >                       dev_err(ov5645->dev, "could not sync v4l2 controls\n");
> > > -                     return ret;
> > > +                     goto err_rpm_put;
> > >               }
> > >
> > >               ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x45);
> > >               if (ret < 0)
> > > -                     return ret;
> > > +                     goto err_rpm_put;
> > >
> > >               ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0,
> > >                                      OV5645_SYSTEM_CTRL0_START);
> > >               if (ret < 0)
> > > -                     return ret;
> > > +                     goto err_rpm_put;
> > >       } else {
> > >               ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x40);
> > >               if (ret < 0)
> > > @@ -1023,14 +1006,15 @@ static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
> > >                                      OV5645_SYSTEM_CTRL0_STOP);
> > >               if (ret < 0)
> > >                       return ret;
> >
> > Not a problem with this patch and should be addressed separately, but the
> > caller will just call s_stream(0) and will ignore the return value. You
> > could complain about the error but still should return 0 when disabling
> > streaming.
> >
> OK, I will create a separate patch on top of this.
>
> > > +             pm_runtime_put(ov5645->dev);
> > >       }
> > >
> > >       return 0;
> > > -}
> > >
> > > -static const struct v4l2_subdev_core_ops ov5645_core_ops = {
> > > -     .s_power = ov5645_s_power,
> > > -};
> > > +err_rpm_put:
> > > +     pm_runtime_put(ov5645->dev);
> > > +     return ret;
> > > +}
> > >
> > >  static const struct v4l2_subdev_video_ops ov5645_video_ops = {
> > >       .s_stream = ov5645_s_stream,
> > > @@ -1046,7 +1030,6 @@ static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = {
> > >  };
> > >
> > >  static const struct v4l2_subdev_ops ov5645_subdev_ops = {
> > > -     .core = &ov5645_core_ops,
> > >       .video = &ov5645_video_ops,
> > >       .pad = &ov5645_subdev_pad_ops,
> > >  };
> > > @@ -1188,11 +1171,9 @@ static int ov5645_probe(struct i2c_client *client)
> > >               goto free_ctrl;
> > >       }
> > >
> > > -     ret = ov5645_s_power(&ov5645->sd, true);
> > > -     if (ret < 0) {
> > > -             dev_err(dev, "could not power up OV5645\n");
> > > +     ret = ov5645_set_power_on(dev);
> > > +     if (ret)
> > >               goto free_entity;
> > > -     }
> > >
> > >       ret = ov5645_read_reg(ov5645, OV5645_CHIP_ID_HIGH, &chip_id_high);
> > >       if (ret < 0 || chip_id_high != OV5645_CHIP_ID_HIGH_BYTE) {
> > > @@ -1209,12 +1190,16 @@ static int ov5645_probe(struct i2c_client *client)
> > >
> > >       dev_info(dev, "OV5645 detected at address 0x%02x\n", client->addr);
> > >
> > > +     pm_runtime_set_active(dev);
> > > +     pm_runtime_get_noresume(dev);
> > > +     pm_runtime_enable(dev);
> > > +
> > >       ret = ov5645_read_reg(ov5645, OV5645_AEC_PK_MANUAL,
> > >                             &ov5645->aec_pk_manual);
> > >       if (ret < 0) {
> > >               dev_err(dev, "could not read AEC/AGC mode\n");
> > >               ret = -ENODEV;
> > > -             goto power_down;
> > > +             goto err_pm_runtime;
> > >       }
> > >
> > >       ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG20,
> > > @@ -1222,7 +1207,7 @@ static int ov5645_probe(struct i2c_client *client)
> > >       if (ret < 0) {
> > >               dev_err(dev, "could not read vflip value\n");
> > >               ret = -ENODEV;
> > > -             goto power_down;
> > > +             goto err_pm_runtime;
> > >       }
> > >
> > >       ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG21,
> > > @@ -1230,14 +1215,18 @@ static int ov5645_probe(struct i2c_client *client)
> > >       if (ret < 0) {
> > >               dev_err(dev, "could not read hflip value\n");
> > >               ret = -ENODEV;
> > > -             goto power_down;
> > > +             goto err_pm_runtime;
> > >       }
> > >
> > > -     ov5645_s_power(&ov5645->sd, false);
> > > +     pm_runtime_set_autosuspend_delay(dev, 1000);
> > > +     pm_runtime_use_autosuspend(dev);
> > > +     pm_runtime_put_autosuspend(dev);
> >
> > You can also do this after registering async subdev. That allows removing
> > err_pm_runtime label and the two lines below it.
> >
> Agreed, I'll move this after registering the subdev.
>
On a closer look, I can move the above after registering the subdev,
but I can get rid of err_pm_runtime label as PM is enabled further up
the code path to detect the senosr.

If you are OK with this i'll post a v2 along with the below two
patches + the suggestions you mentioned earlier on this patch.

[0] https://patchwork.linuxtv.org/project/linux-media/patch/20220927202005.750621-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
[1] https://patchwork.linuxtv.org/project/linux-media/patch/20220919153540.178732-1-prabhakar.mahadev-lad.rj@bp.renesas.com/

Cheers,
Prabhakar
Sakari Ailus Oct. 14, 2022, 10:31 a.m. UTC | #7
Hi Prabhakar,

On Wed, Oct 12, 2022 at 07:55:25PM +0100, Lad, Prabhakar wrote:
> On a closer look, I can move the above after registering the subdev,
> but I can get rid of err_pm_runtime label as PM is enabled further up
> the code path to detect the senosr.
> 
> If you are OK with this i'll post a v2 along with the below two
> patches + the suggestions you mentioned earlier on this patch.

Sounds good to me.
diff mbox series

Patch

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 7806d4b81716..c0edd1017fe8 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -459,7 +459,7 @@  config VIDEO_OV5640
 config VIDEO_OV5645
 	tristate "OmniVision OV5645 sensor support"
 	depends on OF
-	depends on I2C && VIDEO_DEV
+	depends on I2C && PM && VIDEO_DEV
 	select MEDIA_CONTROLLER
 	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
index 81e4e87e1821..3c3b30338328 100644
--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -27,6 +27,7 @@ 
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_graph.h>
+#include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/types.h>
@@ -108,7 +109,6 @@  struct ov5645 {
 	u8 timing_tc_reg21;
 
 	struct mutex power_lock; /* lock to protect power state */
-	int power_count;
 
 	struct gpio_desc *enable_gpio;
 	struct gpio_desc *rst_gpio;
@@ -635,8 +635,24 @@  static int ov5645_set_register_array(struct ov5645 *ov5645,
 	return 0;
 }
 
-static int ov5645_set_power_on(struct ov5645 *ov5645)
+static int ov5645_set_power_off(struct device *dev)
 {
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct ov5645 *ov5645 = to_ov5645(sd);
+
+	ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58);
+	gpiod_set_value_cansleep(ov5645->rst_gpio, 1);
+	gpiod_set_value_cansleep(ov5645->enable_gpio, 0);
+	clk_disable_unprepare(ov5645->xclk);
+	regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
+
+	return 0;
+}
+
+static int ov5645_set_power_on(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct ov5645 *ov5645 = to_ov5645(sd);
 	int ret;
 
 	ret = regulator_bulk_enable(OV5645_NUM_SUPPLIES, ov5645->supplies);
@@ -658,57 +674,19 @@  static int ov5645_set_power_on(struct ov5645 *ov5645)
 
 	msleep(20);
 
-	return 0;
-}
-
-static void ov5645_set_power_off(struct ov5645 *ov5645)
-{
-	gpiod_set_value_cansleep(ov5645->rst_gpio, 1);
-	gpiod_set_value_cansleep(ov5645->enable_gpio, 0);
-	clk_disable_unprepare(ov5645->xclk);
-	regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
-}
-
-static int ov5645_s_power(struct v4l2_subdev *sd, int on)
-{
-	struct ov5645 *ov5645 = to_ov5645(sd);
-	int ret = 0;
-
-	mutex_lock(&ov5645->power_lock);
-
-	/* If the power count is modified from 0 to != 0 or from != 0 to 0,
-	 * update the power state.
-	 */
-	if (ov5645->power_count == !on) {
-		if (on) {
-			ret = ov5645_set_power_on(ov5645);
-			if (ret < 0)
-				goto exit;
-
-			ret = ov5645_set_register_array(ov5645,
-					ov5645_global_init_setting,
+	ret = ov5645_set_register_array(ov5645, ov5645_global_init_setting,
 					ARRAY_SIZE(ov5645_global_init_setting));
-			if (ret < 0) {
-				dev_err(ov5645->dev,
-					"could not set init registers\n");
-				ov5645_set_power_off(ov5645);
-				goto exit;
-			}
-
-			usleep_range(500, 1000);
-		} else {
-			ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58);
-			ov5645_set_power_off(ov5645);
-		}
+	if (ret < 0) {
+		dev_err(ov5645->dev, "could not set init registers\n");
+		goto exit;
 	}
 
-	/* Update the power count. */
-	ov5645->power_count += on ? 1 : -1;
-	WARN_ON(ov5645->power_count < 0);
+	usleep_range(500, 1000);
 
-exit:
-	mutex_unlock(&ov5645->power_lock);
+	return 0;
 
+exit:
+	ov5645_set_power_off(dev);
 	return ret;
 }
 
@@ -795,7 +773,7 @@  static int ov5645_s_ctrl(struct v4l2_ctrl *ctrl)
 	int ret;
 
 	mutex_lock(&ov5645->power_lock);
-	if (!ov5645->power_count) {
+	if (!pm_runtime_get_if_in_use(ov5645->dev)) {
 		mutex_unlock(&ov5645->power_lock);
 		return 0;
 	}
@@ -827,6 +805,7 @@  static int ov5645_s_ctrl(struct v4l2_ctrl *ctrl)
 		break;
 	}
 
+	pm_runtime_put_autosuspend(ov5645->dev);
 	mutex_unlock(&ov5645->power_lock);
 
 	return ret;
@@ -991,6 +970,10 @@  static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
 	int ret;
 
 	if (enable) {
+		ret = pm_runtime_resume_and_get(ov5645->dev);
+		if (ret < 0)
+			return ret;
+
 		ret = ov5645_set_register_array(ov5645,
 					ov5645->current_mode->data,
 					ov5645->current_mode->data_size);
@@ -998,22 +981,22 @@  static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
 			dev_err(ov5645->dev, "could not set mode %dx%d\n",
 				ov5645->current_mode->width,
 				ov5645->current_mode->height);
-			return ret;
+			goto err_rpm_put;
 		}
 		ret = v4l2_ctrl_handler_setup(&ov5645->ctrls);
 		if (ret < 0) {
 			dev_err(ov5645->dev, "could not sync v4l2 controls\n");
-			return ret;
+			goto err_rpm_put;
 		}
 
 		ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x45);
 		if (ret < 0)
-			return ret;
+			goto err_rpm_put;
 
 		ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0,
 				       OV5645_SYSTEM_CTRL0_START);
 		if (ret < 0)
-			return ret;
+			goto err_rpm_put;
 	} else {
 		ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x40);
 		if (ret < 0)
@@ -1023,14 +1006,15 @@  static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable)
 				       OV5645_SYSTEM_CTRL0_STOP);
 		if (ret < 0)
 			return ret;
+		pm_runtime_put(ov5645->dev);
 	}
 
 	return 0;
-}
 
-static const struct v4l2_subdev_core_ops ov5645_core_ops = {
-	.s_power = ov5645_s_power,
-};
+err_rpm_put:
+	pm_runtime_put(ov5645->dev);
+	return ret;
+}
 
 static const struct v4l2_subdev_video_ops ov5645_video_ops = {
 	.s_stream = ov5645_s_stream,
@@ -1046,7 +1030,6 @@  static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = {
 };
 
 static const struct v4l2_subdev_ops ov5645_subdev_ops = {
-	.core = &ov5645_core_ops,
 	.video = &ov5645_video_ops,
 	.pad = &ov5645_subdev_pad_ops,
 };
@@ -1188,11 +1171,9 @@  static int ov5645_probe(struct i2c_client *client)
 		goto free_ctrl;
 	}
 
-	ret = ov5645_s_power(&ov5645->sd, true);
-	if (ret < 0) {
-		dev_err(dev, "could not power up OV5645\n");
+	ret = ov5645_set_power_on(dev);
+	if (ret)
 		goto free_entity;
-	}
 
 	ret = ov5645_read_reg(ov5645, OV5645_CHIP_ID_HIGH, &chip_id_high);
 	if (ret < 0 || chip_id_high != OV5645_CHIP_ID_HIGH_BYTE) {
@@ -1209,12 +1190,16 @@  static int ov5645_probe(struct i2c_client *client)
 
 	dev_info(dev, "OV5645 detected at address 0x%02x\n", client->addr);
 
+	pm_runtime_set_active(dev);
+	pm_runtime_get_noresume(dev);
+	pm_runtime_enable(dev);
+
 	ret = ov5645_read_reg(ov5645, OV5645_AEC_PK_MANUAL,
 			      &ov5645->aec_pk_manual);
 	if (ret < 0) {
 		dev_err(dev, "could not read AEC/AGC mode\n");
 		ret = -ENODEV;
-		goto power_down;
+		goto err_pm_runtime;
 	}
 
 	ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG20,
@@ -1222,7 +1207,7 @@  static int ov5645_probe(struct i2c_client *client)
 	if (ret < 0) {
 		dev_err(dev, "could not read vflip value\n");
 		ret = -ENODEV;
-		goto power_down;
+		goto err_pm_runtime;
 	}
 
 	ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG21,
@@ -1230,14 +1215,18 @@  static int ov5645_probe(struct i2c_client *client)
 	if (ret < 0) {
 		dev_err(dev, "could not read hflip value\n");
 		ret = -ENODEV;
-		goto power_down;
+		goto err_pm_runtime;
 	}
 
-	ov5645_s_power(&ov5645->sd, false);
+	pm_runtime_set_autosuspend_delay(dev, 1000);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_put_autosuspend(dev);
 
 	ret = v4l2_async_register_subdev(&ov5645->sd);
 	if (ret < 0) {
 		dev_err(dev, "could not register v4l2 device\n");
+		pm_runtime_disable(dev);
+		pm_runtime_set_suspended(dev);
 		goto free_entity;
 	}
 
@@ -1245,8 +1234,11 @@  static int ov5645_probe(struct i2c_client *client)
 
 	return 0;
 
+err_pm_runtime:
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
 power_down:
-	ov5645_s_power(&ov5645->sd, false);
+	ov5645_set_power_off(dev);
 free_entity:
 	media_entity_cleanup(&ov5645->sd.entity);
 free_ctrl:
@@ -1264,6 +1256,10 @@  static void ov5645_remove(struct i2c_client *client)
 	v4l2_async_unregister_subdev(&ov5645->sd);
 	media_entity_cleanup(&ov5645->sd.entity);
 	v4l2_ctrl_handler_free(&ov5645->ctrls);
+	pm_runtime_disable(ov5645->dev);
+	if (!pm_runtime_status_suspended(ov5645->dev))
+		ov5645_set_power_off(ov5645->dev);
+	pm_runtime_set_suspended(ov5645->dev);
 	mutex_destroy(&ov5645->power_lock);
 }
 
@@ -1279,10 +1275,15 @@  static const struct of_device_id ov5645_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, ov5645_of_match);
 
+static const struct dev_pm_ops ov5645_pm_ops = {
+	SET_RUNTIME_PM_OPS(ov5645_set_power_off, ov5645_set_power_on, NULL)
+};
+
 static struct i2c_driver ov5645_i2c_driver = {
 	.driver = {
 		.of_match_table = ov5645_of_match,
 		.name  = "ov5645",
+		.pm = &ov5645_pm_ops,
 	},
 	.probe_new = ov5645_probe,
 	.remove = ov5645_remove,