diff mbox series

[RFC,RESEND,2/2] arm64: dts: renesas: r9a07g043: Split out RZ/G2UL SoC specific parts

Message ID 20221017091201.199457-3-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series RZ/G2UL separate out SoC specific parts | expand

Commit Message

Lad, Prabhakar Oct. 17, 2022, 9:12 a.m. UTC
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Move RZ/G2UL SoC specific parts to r9a07g043u.dtsi so that r9a07g043.dtsi
can be shared with RZ/Five (RISC-V SoC).

Below are the changes due to which SoC specific parts are moved to
r9a07g043u.dtsi:
- RZ/G2UL has Cortex-A55 (ARM64) whereas the RZ/Five has AX45MP (RISC-V)
- RZ/G2UL has GICv3 as interrupt controller whereas the RZ/Five has PLIC
- RZ/G2UL has interrupts for SYSC block whereas interrupts are missing
  for SYSC block on RZ/Five

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a07g043.dtsi  | 54 +------------------
 arch/arm64/boot/dts/renesas/r9a07g043u.dtsi | 60 +++++++++++++++++++++
 2 files changed, 61 insertions(+), 53 deletions(-)

Comments

Geert Uytterhoeven Oct. 25, 2022, 12:37 p.m. UTC | #1
Hi Prabhakar,

On Mon, Oct 17, 2022 at 11:12 AM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Move RZ/G2UL SoC specific parts to r9a07g043u.dtsi so that r9a07g043.dtsi
> can be shared with RZ/Five (RISC-V SoC).
>
> Below are the changes due to which SoC specific parts are moved to
> r9a07g043u.dtsi:
> - RZ/G2UL has Cortex-A55 (ARM64) whereas the RZ/Five has AX45MP (RISC-V)
> - RZ/G2UL has GICv3 as interrupt controller whereas the RZ/Five has PLIC
> - RZ/G2UL has interrupts for SYSC block whereas interrupts are missing
>   for SYSC block on RZ/Five
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Thanks for your patch!

This assumes the operating points tables are the same for both variants?
I guess that's OK.

Overall, LGTM.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Lad, Prabhakar Oct. 25, 2022, 4:13 p.m. UTC | #2
Hi Geert,

Thank you for the review.

On Tue, Oct 25, 2022 at 1:37 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Mon, Oct 17, 2022 at 11:12 AM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> >
> > Move RZ/G2UL SoC specific parts to r9a07g043u.dtsi so that r9a07g043.dtsi
> > can be shared with RZ/Five (RISC-V SoC).
> >
> > Below are the changes due to which SoC specific parts are moved to
> > r9a07g043u.dtsi:
> > - RZ/G2UL has Cortex-A55 (ARM64) whereas the RZ/Five has AX45MP (RISC-V)
> > - RZ/G2UL has GICv3 as interrupt controller whereas the RZ/Five has PLIC
> > - RZ/G2UL has interrupts for SYSC block whereas interrupts are missing
> >   for SYSC block on RZ/Five
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Thanks for your patch!
>
> This assumes the operating points tables are the same for both variants?
> I guess that's OK.
>
Ive asked the HW team to confirm this. For the v2 I'll keep it as is
and later move it if required.

> Overall, LGTM.
>
\o/

Cheers,
Prabhakar
Lad, Prabhakar Oct. 27, 2022, 8:20 a.m. UTC | #3
Hi Geert,

On Tue, Oct 25, 2022 at 5:13 PM Lad, Prabhakar
<prabhakar.csengg@gmail.com> wrote:
>
> Hi Geert,
>
> Thank you for the review.
>
> On Tue, Oct 25, 2022 at 1:37 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> >
> > Hi Prabhakar,
> >
> > On Mon, Oct 17, 2022 at 11:12 AM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > >
> > > Move RZ/G2UL SoC specific parts to r9a07g043u.dtsi so that r9a07g043.dtsi
> > > can be shared with RZ/Five (RISC-V SoC).
> > >
> > > Below are the changes due to which SoC specific parts are moved to
> > > r9a07g043u.dtsi:
> > > - RZ/G2UL has Cortex-A55 (ARM64) whereas the RZ/Five has AX45MP (RISC-V)
> > > - RZ/G2UL has GICv3 as interrupt controller whereas the RZ/Five has PLIC
> > > - RZ/G2UL has interrupts for SYSC block whereas interrupts are missing
> > >   for SYSC block on RZ/Five
> > >
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> >
> > Thanks for your patch!
> >
> > This assumes the operating points tables are the same for both variants?
> > I guess that's OK.
> >
> Ive asked the HW team to confirm this. For the v2 I'll keep it as is
> and later move it if required.
>
Ive confirmed with the HW team the OPP table is the same for both the variants.

Cheers,
Prabhakar
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
index c41840e32c30..fd2b7d7e6d1a 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
@@ -1,6 +1,6 @@ 
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
- * Device Tree Source for the RZ/G2UL SoC
+ * Device Tree Source for the RZ/Five and RZ/G2UL SoCs
  *
  * Copyright (C) 2022 Renesas Electronics Corp.
  */
@@ -68,36 +68,8 @@  opp-1000000000 {
 		};
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a55";
-			reg = <0>;
-			device_type = "cpu";
-			#cooling-cells = <2>;
-			next-level-cache = <&L3_CA55>;
-			enable-method = "psci";
-			clocks = <&cpg CPG_CORE R9A07G043_CLK_I>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-
-		L3_CA55: cache-controller-0 {
-			compatible = "cache";
-			cache-unified;
-			cache-size = <0x40000>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-1.0", "arm,psci-0.2";
-		method = "smc";
-	};
-
 	soc: soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -550,12 +522,6 @@  cpg: clock-controller@11010000 {
 		sysc: system-controller@11020000 {
 			compatible = "renesas,r9a07g043-sysc";
 			reg = <0 0x11020000 0 0x10000>;
-			interrupts = <SOC_PERIPHERAL_IRQ(42, IRQ_TYPE_LEVEL_HIGH)>,
-				     <SOC_PERIPHERAL_IRQ(43, IRQ_TYPE_LEVEL_HIGH)>,
-				     <SOC_PERIPHERAL_IRQ(44, IRQ_TYPE_LEVEL_HIGH)>,
-				     <SOC_PERIPHERAL_IRQ(45, IRQ_TYPE_LEVEL_HIGH)>;
-			interrupt-names = "lpm_int", "ca55stbydone_int",
-					  "cm33stbyr_int", "ca55_deny";
 			status = "disabled";
 		};
 
@@ -608,16 +574,6 @@  dmac: dma-controller@11820000 {
 			dma-channels = <16>;
 		};
 
-		gic: interrupt-controller@11900000 {
-			compatible = "arm,gic-v3";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x0 0x11900000 0 0x40000>,
-			      <0x0 0x11940000 0 0x60000>;
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
-		};
-
 		sdhi0: mmc@11c00000 {
 			compatible = "renesas,sdhi-r9a07g043",
 				     "renesas,rcar-gen3-sdhi";
@@ -883,12 +839,4 @@  target: trip-point {
 			};
 		};
 	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
-	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
index be84392ee47f..dcbeda9b6c23 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
@@ -10,3 +10,63 @@ 
 #define SOC_PERIPHERAL_IRQ(nr, na)	GIC_SPI nr na
 
 #include "r9a07g043.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G043_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x40000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&soc {
+	interrupt-parent = <&gic>;
+
+	gic: interrupt-controller@11900000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0x11900000 0 0x40000>,
+		      <0x0 0x11940000 0 0x60000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&sysc {
+	interrupts = <SOC_PERIPHERAL_IRQ(42, IRQ_TYPE_LEVEL_HIGH)>,
+		     <SOC_PERIPHERAL_IRQ(43, IRQ_TYPE_LEVEL_HIGH)>,
+		     <SOC_PERIPHERAL_IRQ(44, IRQ_TYPE_LEVEL_HIGH)>,
+		     <SOC_PERIPHERAL_IRQ(45, IRQ_TYPE_LEVEL_HIGH)>;
+	interrupt-names = "lpm_int", "ca55stbydone_int",
+			  "cm33stbyr_int", "ca55_deny";
+};