diff mbox series

[10/22] input: remove sh_keysc

Message ID 20230113062339.1909087-11-hch@lst.de (mailing list archive)
State Not Applicable
Delegated to: Geert Uytterhoeven
Headers show
Series [01/22] gpu/drm: remove the shmobile drm driver | expand

Commit Message

Christoph Hellwig Jan. 13, 2023, 6:23 a.m. UTC
Now that arch/sh is removed this driver is dead code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/input/keyboard/Kconfig    |  10 -
 drivers/input/keyboard/Makefile   |   1 -
 drivers/input/keyboard/sh_keysc.c | 334 ------------------------------
 3 files changed, 345 deletions(-)
 delete mode 100644 drivers/input/keyboard/sh_keysc.c

Comments

Geert Uytterhoeven Jan. 13, 2023, 8:28 a.m. UTC | #1
On Fri, Jan 13, 2023 at 7:24 AM Christoph Hellwig <hch@lst.de> wrote:
> Now that arch/sh is removed this driver is dead code.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  drivers/input/keyboard/Kconfig    |  10 -
>  drivers/input/keyboard/Makefile   |   1 -
>  drivers/input/keyboard/sh_keysc.c | 334 ------------------------------
>  3 files changed, 345 deletions(-)
>  delete mode 100644 drivers/input/keyboard/sh_keysc.c
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 84490915ae4d5a..882ec5fef214ac 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -625,16 +625,6 @@ config KEYBOARD_SUNKBD
>           To compile this driver as a module, choose M here: the
>           module will be called sunkbd.
>
> -config KEYBOARD_SH_KEYSC
> -       tristate "SuperH KEYSC keypad support"
> -       depends on ARCH_SHMOBILE || COMPILE_TEST
> -       help
> -         Say Y here if you want to use a keypad attached to the KEYSC block
> -         on SuperH processors such as sh7722 and sh7343.

FTR, this hardware block is also present on the ARM-based
SH-Mobile AG5, and R-Mobile A1 and APE6 SoCs.
Again, no DT support.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
diff mbox series

Patch

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 84490915ae4d5a..882ec5fef214ac 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -625,16 +625,6 @@  config KEYBOARD_SUNKBD
 	  To compile this driver as a module, choose M here: the
 	  module will be called sunkbd.
 
-config KEYBOARD_SH_KEYSC
-	tristate "SuperH KEYSC keypad support"
-	depends on ARCH_SHMOBILE || COMPILE_TEST
-	help
-	  Say Y here if you want to use a keypad attached to the KEYSC block
-	  on SuperH processors such as sh7722 and sh7343.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sh_keysc.
-
 config KEYBOARD_STMPE
 	tristate "STMPE keypad support"
 	depends on MFD_STMPE
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 5f67196bb2c1ea..8aba0b052b4504 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -60,7 +60,6 @@  obj-$(CONFIG_KEYBOARD_QT1050)           += qt1050.o
 obj-$(CONFIG_KEYBOARD_QT1070)           += qt1070.o
 obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
 obj-$(CONFIG_KEYBOARD_SAMSUNG)		+= samsung-keypad.o
-obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
 obj-$(CONFIG_KEYBOARD_SNVS_PWRKEY)	+= snvs_pwrkey.o
 obj-$(CONFIG_KEYBOARD_SPEAR)		+= spear-keyboard.o
 obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
deleted file mode 100644
index 2c00320f739fc1..00000000000000
--- a/drivers/input/keyboard/sh_keysc.c
+++ /dev/null
@@ -1,334 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SuperH KEYSC Keypad Driver
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * Based on gpio_keys.c, Copyright 2005 Phil Blundell
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/bitmap.h>
-#include <linux/pm_runtime.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-static const struct {
-	unsigned char kymd, keyout, keyin;
-} sh_keysc_mode[] = {
-	[SH_KEYSC_MODE_1] = { 0, 6, 5 },
-	[SH_KEYSC_MODE_2] = { 1, 5, 6 },
-	[SH_KEYSC_MODE_3] = { 2, 4, 7 },
-	[SH_KEYSC_MODE_4] = { 3, 6, 6 },
-	[SH_KEYSC_MODE_5] = { 4, 6, 7 },
-	[SH_KEYSC_MODE_6] = { 5, 8, 8 },
-};
-
-struct sh_keysc_priv {
-	void __iomem *iomem_base;
-	DECLARE_BITMAP(last_keys, SH_KEYSC_MAXKEYS);
-	struct input_dev *input;
-	struct sh_keysc_info pdata;
-};
-
-#define KYCR1 0
-#define KYCR2 1
-#define KYINDR 2
-#define KYOUTDR 3
-
-#define KYCR2_IRQ_LEVEL    0x10
-#define KYCR2_IRQ_DISABLED 0x00
-
-static unsigned long sh_keysc_read(struct sh_keysc_priv *p, int reg_nr)
-{
-	return ioread16(p->iomem_base + (reg_nr << 2));
-}
-
-static void sh_keysc_write(struct sh_keysc_priv *p, int reg_nr,
-			   unsigned long value)
-{
-	iowrite16(value, p->iomem_base + (reg_nr << 2));
-}
-
-static void sh_keysc_level_mode(struct sh_keysc_priv *p,
-				unsigned long keys_set)
-{
-	struct sh_keysc_info *pdata = &p->pdata;
-
-	sh_keysc_write(p, KYOUTDR, 0);
-	sh_keysc_write(p, KYCR2, KYCR2_IRQ_LEVEL | (keys_set << 8));
-
-	if (pdata->kycr2_delay)
-		udelay(pdata->kycr2_delay);
-}
-
-static void sh_keysc_map_dbg(struct device *dev, unsigned long *map,
-			     const char *str)
-{
-	int k;
-
-	for (k = 0; k < BITS_TO_LONGS(SH_KEYSC_MAXKEYS); k++)
-		dev_dbg(dev, "%s[%d] 0x%lx\n", str, k, map[k]);
-}
-
-static irqreturn_t sh_keysc_isr(int irq, void *dev_id)
-{
-	struct platform_device *pdev = dev_id;
-	struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
-	struct sh_keysc_info *pdata = &priv->pdata;
-	int keyout_nr = sh_keysc_mode[pdata->mode].keyout;
-	int keyin_nr = sh_keysc_mode[pdata->mode].keyin;
-	DECLARE_BITMAP(keys, SH_KEYSC_MAXKEYS);
-	DECLARE_BITMAP(keys0, SH_KEYSC_MAXKEYS);
-	DECLARE_BITMAP(keys1, SH_KEYSC_MAXKEYS);
-	unsigned char keyin_set, tmp;
-	int i, k, n;
-
-	dev_dbg(&pdev->dev, "isr!\n");
-
-	bitmap_fill(keys1, SH_KEYSC_MAXKEYS);
-	bitmap_zero(keys0, SH_KEYSC_MAXKEYS);
-
-	do {
-		bitmap_zero(keys, SH_KEYSC_MAXKEYS);
-		keyin_set = 0;
-
-		sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
-
-		for (i = 0; i < keyout_nr; i++) {
-			n = keyin_nr * i;
-
-			/* drive one KEYOUT pin low, read KEYIN pins */
-			sh_keysc_write(priv, KYOUTDR, 0xffff ^ (3 << (i * 2)));
-			udelay(pdata->delay);
-			tmp = sh_keysc_read(priv, KYINDR);
-
-			/* set bit if key press has been detected */
-			for (k = 0; k < keyin_nr; k++) {
-				if (tmp & (1 << k))
-					__set_bit(n + k, keys);
-			}
-
-			/* keep track of which KEYIN bits that have been set */
-			keyin_set |= tmp ^ ((1 << keyin_nr) - 1);
-		}
-
-		sh_keysc_level_mode(priv, keyin_set);
-
-		bitmap_complement(keys, keys, SH_KEYSC_MAXKEYS);
-		bitmap_and(keys1, keys1, keys, SH_KEYSC_MAXKEYS);
-		bitmap_or(keys0, keys0, keys, SH_KEYSC_MAXKEYS);
-
-		sh_keysc_map_dbg(&pdev->dev, keys, "keys");
-
-	} while (sh_keysc_read(priv, KYCR2) & 0x01);
-
-	sh_keysc_map_dbg(&pdev->dev, priv->last_keys, "last_keys");
-	sh_keysc_map_dbg(&pdev->dev, keys0, "keys0");
-	sh_keysc_map_dbg(&pdev->dev, keys1, "keys1");
-
-	for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
-		k = pdata->keycodes[i];
-		if (!k)
-			continue;
-
-		if (test_bit(i, keys0) == test_bit(i, priv->last_keys))
-			continue;
-
-		if (test_bit(i, keys1) || test_bit(i, keys0)) {
-			input_event(priv->input, EV_KEY, k, 1);
-			__set_bit(i, priv->last_keys);
-		}
-
-		if (!test_bit(i, keys1)) {
-			input_event(priv->input, EV_KEY, k, 0);
-			__clear_bit(i, priv->last_keys);
-		}
-
-	}
-	input_sync(priv->input);
-
-	return IRQ_HANDLED;
-}
-
-static int sh_keysc_probe(struct platform_device *pdev)
-{
-	struct sh_keysc_priv *priv;
-	struct sh_keysc_info *pdata;
-	struct resource *res;
-	struct input_dev *input;
-	int i;
-	int irq, error;
-
-	if (!dev_get_platdata(&pdev->dev)) {
-		dev_err(&pdev->dev, "no platform data defined\n");
-		error = -EINVAL;
-		goto err0;
-	}
-
-	error = -ENXIO;
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "failed to get I/O memory\n");
-		goto err0;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		goto err0;
-
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (priv == NULL) {
-		dev_err(&pdev->dev, "failed to allocate driver data\n");
-		error = -ENOMEM;
-		goto err0;
-	}
-
-	platform_set_drvdata(pdev, priv);
-	memcpy(&priv->pdata, dev_get_platdata(&pdev->dev), sizeof(priv->pdata));
-	pdata = &priv->pdata;
-
-	priv->iomem_base = ioremap(res->start, resource_size(res));
-	if (priv->iomem_base == NULL) {
-		dev_err(&pdev->dev, "failed to remap I/O memory\n");
-		error = -ENXIO;
-		goto err1;
-	}
-
-	priv->input = input_allocate_device();
-	if (!priv->input) {
-		dev_err(&pdev->dev, "failed to allocate input device\n");
-		error = -ENOMEM;
-		goto err2;
-	}
-
-	input = priv->input;
-	input->evbit[0] = BIT_MASK(EV_KEY);
-
-	input->name = pdev->name;
-	input->phys = "sh-keysc-keys/input0";
-	input->dev.parent = &pdev->dev;
-
-	input->id.bustype = BUS_HOST;
-	input->id.vendor = 0x0001;
-	input->id.product = 0x0001;
-	input->id.version = 0x0100;
-
-	input->keycode = pdata->keycodes;
-	input->keycodesize = sizeof(pdata->keycodes[0]);
-	input->keycodemax = ARRAY_SIZE(pdata->keycodes);
-
-	error = request_threaded_irq(irq, NULL, sh_keysc_isr, IRQF_ONESHOT,
-				     dev_name(&pdev->dev), pdev);
-	if (error) {
-		dev_err(&pdev->dev, "failed to request IRQ\n");
-		goto err3;
-	}
-
-	for (i = 0; i < SH_KEYSC_MAXKEYS; i++)
-		__set_bit(pdata->keycodes[i], input->keybit);
-	__clear_bit(KEY_RESERVED, input->keybit);
-
-	error = input_register_device(input);
-	if (error) {
-		dev_err(&pdev->dev, "failed to register input device\n");
-		goto err4;
-	}
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
-
-	sh_keysc_write(priv, KYCR1, (sh_keysc_mode[pdata->mode].kymd << 8) |
-		       pdata->scan_timing);
-	sh_keysc_level_mode(priv, 0);
-
-	device_init_wakeup(&pdev->dev, 1);
-
-	return 0;
-
- err4:
-	free_irq(irq, pdev);
- err3:
-	input_free_device(input);
- err2:
-	iounmap(priv->iomem_base);
- err1:
-	kfree(priv);
- err0:
-	return error;
-}
-
-static int sh_keysc_remove(struct platform_device *pdev)
-{
-	struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
-
-	sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
-
-	input_unregister_device(priv->input);
-	free_irq(platform_get_irq(pdev, 0), pdev);
-	iounmap(priv->iomem_base);
-
-	pm_runtime_put_sync(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
-
-	kfree(priv);
-
-	return 0;
-}
-
-static int sh_keysc_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
-	int irq = platform_get_irq(pdev, 0);
-	unsigned short value;
-
-	value = sh_keysc_read(priv, KYCR1);
-
-	if (device_may_wakeup(dev)) {
-		sh_keysc_write(priv, KYCR1, value | 0x80);
-		enable_irq_wake(irq);
-	} else {
-		sh_keysc_write(priv, KYCR1, value & ~0x80);
-		pm_runtime_put_sync(dev);
-	}
-
-	return 0;
-}
-
-static int sh_keysc_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int irq = platform_get_irq(pdev, 0);
-
-	if (device_may_wakeup(dev))
-		disable_irq_wake(irq);
-	else
-		pm_runtime_get_sync(dev);
-
-	return 0;
-}
-
-static DEFINE_SIMPLE_DEV_PM_OPS(sh_keysc_dev_pm_ops,
-				sh_keysc_suspend, sh_keysc_resume);
-
-static struct platform_driver sh_keysc_device_driver = {
-	.probe		= sh_keysc_probe,
-	.remove		= sh_keysc_remove,
-	.driver		= {
-		.name	= "sh_keysc",
-		.pm	= pm_sleep_ptr(&sh_keysc_dev_pm_ops),
-	}
-};
-module_platform_driver(sh_keysc_device_driver);
-
-MODULE_AUTHOR("Magnus Damm");
-MODULE_DESCRIPTION("SuperH KEYSC Keypad Driver");
-MODULE_LICENSE("GPL");