diff mbox series

dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes

Message ID 20230819010928.916438-1-robh@kernel.org (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show
Series dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes | expand

Commit Message

Rob Herring (Arm) Aug. 19, 2023, 1:09 a.m. UTC
A schema under 'additionalProperties' works better for matching any
property/node other than the ones explicitly listed. Convert the schema
to use that rather than the wildcard and if/then schema.

Drop 'phandle' properties which never need to be explicitly listed while
we're here.

Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../pinctrl/renesas,rza2-pinctrl.yaml         | 61 +++++++++----------
 1 file changed, 28 insertions(+), 33 deletions(-)

Comments

Krzysztof Kozlowski Aug. 19, 2023, 10:02 a.m. UTC | #1
On 19/08/2023 03:09, Rob Herring wrote:
> A schema under 'additionalProperties' works better for matching any
> property/node other than the ones explicitly listed. Convert the schema
> to use that rather than the wildcard and if/then schema.
> 
> Drop 'phandle' properties which never need to be explicitly listed while
> we're here.
> 
> Signed-off-by: Rob Herring <robh@kernel.org>

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Linus Walleij Aug. 21, 2023, 10:33 a.m. UTC | #2
On Sat, Aug 19, 2023 at 3:09 AM Rob Herring <robh@kernel.org> wrote:

> A schema under 'additionalProperties' works better for matching any
> property/node other than the ones explicitly listed. Convert the schema
> to use that rather than the wildcard and if/then schema.
>
> Drop 'phandle' properties which never need to be explicitly listed while
> we're here.
>
> Signed-off-by: Rob Herring <robh@kernel.org>

Looks good to me, but Geert usually handles Renesas stuff so not
applying unless I get asked explicitly to do so.

Yours,
Linus Walleij
Geert Uytterhoeven Aug. 21, 2023, noon UTC | #3
Hi Linus,

On Mon, Aug 21, 2023 at 12:34 PM Linus Walleij <linus.walleij@linaro.org> wrote:
> On Sat, Aug 19, 2023 at 3:09 AM Rob Herring <robh@kernel.org> wrote:
> > A schema under 'additionalProperties' works better for matching any
> > property/node other than the ones explicitly listed. Convert the schema
> > to use that rather than the wildcard and if/then schema.
> >
> > Drop 'phandle' properties which never need to be explicitly listed while
> > we're here.
> >
> > Signed-off-by: Rob Herring <robh@kernel.org>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

> Looks good to me, but Geert usually handles Renesas stuff so not
> applying unless I get asked explicitly to do so.

Unless some new bugs show up (hold wood etc.), I do not plan to
send more pin control PRs for v6.5 or v6.6, so please take it.
Thanks!

Gr{oetje,eeting}s,

                        Geert
Linus Walleij Aug. 23, 2023, 8:24 a.m. UTC | #4
On Sat, Aug 19, 2023 at 3:09 AM Rob Herring <robh@kernel.org> wrote:

> A schema under 'additionalProperties' works better for matching any
> property/node other than the ones explicitly listed. Convert the schema
> to use that rather than the wildcard and if/then schema.
>
> Drop 'phandle' properties which never need to be explicitly listed while
> we're here.
>
> Signed-off-by: Rob Herring <robh@kernel.org>

Patch applied to the pinctrl tree.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
index 37173a64fed2..8271e7b2c162 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
@@ -37,40 +37,37 @@  properties:
   gpio-ranges:
     maxItems: 1
 
-patternProperties:
-  "^.*$":
-    if:
-      type: object
-    then:
-      allOf:
-        - $ref: pincfg-node.yaml#
-        - $ref: pinmux-node.yaml#
+additionalProperties:
+  type: object
+
+  allOf:
+    - $ref: pincfg-node.yaml#
+    - $ref: pinmux-node.yaml#
+
+  description:
+    The child nodes of the pin controller designate pins to be used for
+    specific peripheral functions or as GPIO.
+
+    A pin multiplexing sub-node describes how to configure a set of
+    (or a single) pin in some desired alternate function mode.
+    The values for the pinmux properties are a combination of port name,
+    pin number and the desired function index. Use the RZA2_PINMUX macro
+    located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily
+    define these.
+    For assigning GPIO pins, use the macro RZA2_PIN also in
+    to express the desired port pin.
+
+  properties:
+    pinmux:
       description:
-        The child nodes of the pin controller designate pins to be used for
-        specific peripheral functions or as GPIO.
+        Values are constructed from GPIO port number, pin number, and
+        alternate function configuration number using the RZA2_PINMUX()
+        helper macro in r7s9210-pinctrl.h.
 
-        A pin multiplexing sub-node describes how to configure a set of
-        (or a single) pin in some desired alternate function mode.
-        The values for the pinmux properties are a combination of port name,
-        pin number and the desired function index. Use the RZA2_PINMUX macro
-        located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily
-        define these.
-        For assigning GPIO pins, use the macro RZA2_PIN also in
-        to express the desired port pin.
+  required:
+    - pinmux
 
-      properties:
-        phandle: true
-
-        pinmux:
-          description:
-            Values are constructed from GPIO port number, pin number, and
-            alternate function configuration number using the RZA2_PINMUX()
-            helper macro in r7s9210-pinctrl.h.
-
-      required:
-        - pinmux
-
-      additionalProperties: false
+  additionalProperties: false
 
 allOf:
   - $ref: pinctrl.yaml#
@@ -82,8 +79,6 @@  required:
   - '#gpio-cells'
   - gpio-ranges
 
-additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/pinctrl/r7s9210-pinctrl.h>