diff mbox series

[v20,14/19] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host

Message ID 20230825093219.2685912-15-yoshihiro.shimoda.uh@renesas.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series PCI: rcar-gen4: Add R-Car Gen4 PCIe support | expand

Commit Message

Yoshihiro Shimoda Aug. 25, 2023, 9:32 a.m. UTC
Document bindings for Renesas R-Car Gen4 and R-Car S4-8 (R8A779F0)
PCIe host module.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
---
 .../bindings/pci/rcar-gen4-pci-host.yaml      | 123 ++++++++++++++++++
 1 file changed, 123 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml

Comments

Geert Uytterhoeven Aug. 31, 2023, 1:12 p.m. UTC | #1
Hi Shimoda-san,

On Fri, Aug 25, 2023 at 3:18 PM Yoshihiro Shimoda
<yoshihiro.shimoda.uh@renesas.com> wrote:
> Document bindings for Renesas R-Car Gen4 and R-Car S4-8 (R8A779F0)
> PCIe host module.
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>

Thanks for your patch!

> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
> @@ -0,0 +1,123 @@

> +  resets:
> +    maxItems: 1
> +
> +  resets-names:

reset-names

> +    items:
> +      - const: pwr
> +
> +  max-link-speed:
> +    maximum: 4
> +
> +  num-lanes:
> +    maximum: 4
> +
> +required:
> +  - compatible
> +  - reg

Missing "reg-names".

> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - resets
> +  - reset-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/r8a779f0-sysc.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        pcie: pcie@e65d0000 {
> +            compatible = "renesas,r8a779f0-pcie", "renesas,rcar-gen4-pcie";
> +            reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d2000 0 0x0800>,
> +                  <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>,
> +                  <0 0xe65d6200 0 0x0e00>, <0 0xfe000000 0 0x400000>;

The lenght "0x0e00" does not match your DTS patch
https://lore.kernel.org/linux-renesas-soc/20230828041434.2747699-2-yoshihiro.shimoda.uh@renesas.com

> +            reg-names = "dbi", "dbi2", "atu", "dma", "app", "config";
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            bus-range = <0x00 0xff>;
> +            device_type = "pci";
> +            ranges = <0x01000000 0 0x00000000 0 0xfe000000 0 0x00400000>,
> +                     <0x02000000 0 0x30000000 0 0x30000000 0 0x10000000>;
> +            dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
> +            interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;

What about SPI 419, 420, 421?

> +            interrupt-names = "msi", "dma", "sft_ce", "app";
> +            #interrupt-cells = <1>;
> +            interrupt-map-mask = <0 0 0 7>;
> +            interrupt-map = <0 0 0 1 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> +                            <0 0 0 2 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> +                            <0 0 0 3 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> +                            <0 0 0 4 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>;
> +            clocks = <&cpg CPG_MOD 624>, <&clkref>;
> +            clock-names = "core", "ref";
> +            power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
> +            resets = <&cpg 624>;
> +            reset-names = "pwr";
> +            num-lanes = <2>;
> +            snps,enable-cdm-check;
> +            max-link-speed = <4>;
> +        };
> +    };

BTW, I think it would be good to make the order of the properties and
in the example match between the host and endpoint bindings, to make
the output of
"diff Documentation/devicetree/bindings/pci/rcar-gen4-pci-{host,ep}.yaml"
as small as possible.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds


> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - resets
> +  - reset-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/r8a779f0-sysc.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        pcie: pcie@e65d0000 {
> +            compatible = "renesas,r8a779f0-pcie", "renesas,rcar-gen4-pcie";
> +            reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d2000 0 0x0800>,
> +                  <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>,
> +                  <0 0xe65d6200 0 0x0e00>, <0 0xfe000000 0 0x400000>;
> +            reg-names = "dbi", "dbi2", "atu", "dma", "app", "config";
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            bus-range = <0x00 0xff>;
> +            device_type = "pci";
> +            ranges = <0x01000000 0 0x00000000 0 0xfe000000 0 0x00400000>,
> +                     <0x02000000 0 0x30000000 0 0x30000000 0 0x10000000>;
> +            dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
> +            interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "msi", "dma", "sft_ce", "app";
> +            #interrupt-cells = <1>;
> +            interrupt-map-mask = <0 0 0 7>;
> +            interrupt-map = <0 0 0 1 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> +                            <0 0 0 2 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> +                            <0 0 0 3 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> +                            <0 0 0 4 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>;
> +            clocks = <&cpg CPG_MOD 624>, <&clkref>;
> +            clock-names = "core", "ref";
> +            power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
> +            resets = <&cpg 624>;
> +            reset-names = "pwr";
> +            num-lanes = <2>;
> +            snps,enable-cdm-check;
> +            max-link-speed = <4>;
> +        };
> +    };
> --
> 2.25.1
>


--
Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Yoshihiro Shimoda Sept. 1, 2023, 1:13 a.m. UTC | #2
Hi Geert-san,

> From: Geert Uytterhoeven, Sent: Thursday, August 31, 2023 10:13 PM
> 
> Hi Shimoda-san,
> 
> On Fri, Aug 25, 2023 at 3:18 PM Yoshihiro Shimoda
> <yoshihiro.shimoda.uh@renesas.com> wrote:
> > Document bindings for Renesas R-Car Gen4 and R-Car S4-8 (R8A779F0)
> > PCIe host module.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
> 
> Thanks for your patch!

Thank you for your review!

> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
> > @@ -0,0 +1,123 @@
> 
> > +  resets:
> > +    maxItems: 1
> > +
> > +  resets-names:
> 
> reset-names

Oops! I'll fix it.

> > +    items:
> > +      - const: pwr
> > +
> > +  max-link-speed:
> > +    maximum: 4
> > +
> > +  num-lanes:
> > +    maximum: 4
> > +
> > +required:
> > +  - compatible
> > +  - reg
> 
> Missing "reg-names".

I got it. I'll add it.

> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - power-domains
> > +  - resets
> > +  - reset-names
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/power/r8a779f0-sysc.h>
> > +
> > +    soc {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        pcie: pcie@e65d0000 {
> > +            compatible = "renesas,r8a779f0-pcie", "renesas,rcar-gen4-pcie";
> > +            reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d2000 0 0x0800>,
> > +                  <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>,
> > +                  <0 0xe65d6200 0 0x0e00>, <0 0xfe000000 0 0x400000>;
> 
> The lenght "0x0e00" does not match your DTS patch
<snip URL>

It seemed my DTS patch was not correct. Also, as you mentioned on the other email [1],
I should add a reg for "phy". I'll revise the dt-bindings doc.
https://lore.kernel.org/all/CAMuHMdWrrwwY=8bySDVYc9jD9zdKbeNytDVUSm7vci6LN=g6Qg@mail.gmail.com/

> 
> > +            reg-names = "dbi", "dbi2", "atu", "dma", "app", "config";
> > +            #address-cells = <3>;
> > +            #size-cells = <2>;
> > +            bus-range = <0x00 0xff>;
> > +            device_type = "pci";
> > +            ranges = <0x01000000 0 0x00000000 0 0xfe000000 0 0x00400000>,
> > +                     <0x02000000 0 0x30000000 0 0x30000000 0 0x10000000>;
> > +            dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
> > +            interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
> 
> What about SPI 419, 420, 421?

These SPI interrupts cannot match the Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
Also, I cannot describe the detail of these SPI interrupts behavior because of the datasheet
doesn't mention the detail... So, I didn't describe them.

> > +            interrupt-names = "msi", "dma", "sft_ce", "app";
> > +            #interrupt-cells = <1>;
> > +            interrupt-map-mask = <0 0 0 7>;
> > +            interrupt-map = <0 0 0 1 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> > +                            <0 0 0 2 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> > +                            <0 0 0 3 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> > +                            <0 0 0 4 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>;
> > +            clocks = <&cpg CPG_MOD 624>, <&clkref>;
> > +            clock-names = "core", "ref";
> > +            power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
> > +            resets = <&cpg 624>;
> > +            reset-names = "pwr";
> > +            num-lanes = <2>;
> > +            snps,enable-cdm-check;
> > +            max-link-speed = <4>;
> > +        };
> > +    };
> 
> BTW, I think it would be good to make the order of the properties and
> in the example match between the host and endpoint bindings, to make
> the output of
> "diff Documentation/devicetree/bindings/pci/rcar-gen4-pci-{host,ep}.yaml"
> as small as possible.

Thank you for your suggestion! I'll revise the dt-bindings doc.

Best regards,
Yoshihiro Shimoda

> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds
> 
> 
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - power-domains
> > +  - resets
> > +  - reset-names
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/power/r8a779f0-sysc.h>
> > +
> > +    soc {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        pcie: pcie@e65d0000 {
> > +            compatible = "renesas,r8a779f0-pcie", "renesas,rcar-gen4-pcie";
> > +            reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d2000 0 0x0800>,
> > +                  <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>,
> > +                  <0 0xe65d6200 0 0x0e00>, <0 0xfe000000 0 0x400000>;
> > +            reg-names = "dbi", "dbi2", "atu", "dma", "app", "config";
> > +            #address-cells = <3>;
> > +            #size-cells = <2>;
> > +            bus-range = <0x00 0xff>;
> > +            device_type = "pci";
> > +            ranges = <0x01000000 0 0x00000000 0 0xfe000000 0 0x00400000>,
> > +                     <0x02000000 0 0x30000000 0 0x30000000 0 0x10000000>;
> > +            dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
> > +            interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
> > +            interrupt-names = "msi", "dma", "sft_ce", "app";
> > +            #interrupt-cells = <1>;
> > +            interrupt-map-mask = <0 0 0 7>;
> > +            interrupt-map = <0 0 0 1 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> > +                            <0 0 0 2 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> > +                            <0 0 0 3 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> > +                            <0 0 0 4 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>;
> > +            clocks = <&cpg CPG_MOD 624>, <&clkref>;
> > +            clock-names = "core", "ref";
> > +            power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
> > +            resets = <&cpg 624>;
> > +            reset-names = "pwr";
> > +            num-lanes = <2>;
> > +            snps,enable-cdm-check;
> > +            max-link-speed = <4>;
> > +        };
> > +    };
> > --
> > 2.25.1
> >
> 
> 
> --
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
new file mode 100644
index 000000000000..513a3416dd8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
@@ -0,0 +1,123 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rcar-gen4-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen4 PCIe Host
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: renesas,r8a779f0-pcie   # R-Car S4-8
+      - const: renesas,rcar-gen4-pcie  # R-Car Gen4
+
+  reg:
+    maxItems: 6
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: atu
+      - const: dma
+      - const: app
+      - const: config
+
+  interrupts:
+    maxItems: 4
+
+  interrupt-names:
+    items:
+      - const: msi
+      - const: dma
+      - const: sft_ce
+      - const: app
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: ref
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  resets-names:
+    items:
+      - const: pwr
+
+  max-link-speed:
+    maximum: 4
+
+  num-lanes:
+    maximum: 4
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@e65d0000 {
+            compatible = "renesas,r8a779f0-pcie", "renesas,rcar-gen4-pcie";
+            reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d2000 0 0x0800>,
+                  <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>,
+                  <0 0xe65d6200 0 0x0e00>, <0 0xfe000000 0 0x400000>;
+            reg-names = "dbi", "dbi2", "atu", "dma", "app", "config";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            ranges = <0x01000000 0 0x00000000 0 0xfe000000 0 0x00400000>,
+                     <0x02000000 0 0x30000000 0 0x30000000 0 0x10000000>;
+            dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+            interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi", "dma", "sft_ce", "app";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map = <0 0 0 1 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 2 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 3 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 4 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 624>, <&clkref>;
+            clock-names = "core", "ref";
+            power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+            resets = <&cpg 624>;
+            reset-names = "pwr";
+            num-lanes = <2>;
+            snps,enable-cdm-check;
+            max-link-speed = <4>;
+        };
+    };