diff mbox series

[1/5] i2c: rcar: avoid non-standard use of goto

Message ID 20230906200024.5305-2-wsa+renesas@sang-engineering.com (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show
Series i2c: clock calculation cleanups for Renesas devices | expand

Commit Message

Wolfram Sang Sept. 6, 2023, 8 p.m. UTC
Kernel functions goto somewhere on error conditions. Using goto for the
default path is irritating. Let's bail out on error instead and use a
proper retval.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

I dropped the Rev-bys because I think the changes are not trivial. YMMV.

 drivers/i2c/busses/i2c-rcar.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

Comments

Geert Uytterhoeven Sept. 8, 2023, 3:03 p.m. UTC | #1
On Wed, 6 Sep 2023, Wolfram Sang wrote:
> Kernel functions goto somewhere on error conditions. Using goto for the
> default path is irritating. Let's bail out on error instead and use a
> proper retval.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

 						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
 							    -- Linus Torvalds
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index a32a93f9a60d..49dfbeebf6b8 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -317,12 +317,12 @@  static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv)
 	for (scgd = 0; scgd < 0x40; scgd++) {
 		scl = ick / (20 + (scgd * 8) + round);
 		if (scl <= t.bus_freq_hz)
-			goto scgd_find;
+			break;
 	}
-	dev_err(dev, "it is impossible to calculate best SCL\n");
-	return -EIO;
 
-scgd_find:
+	if (scgd == 0x40)
+		goto err_no_val;
+
 	dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n",
 		scl, t.bus_freq_hz, rate, round, cdf, scgd);
 
@@ -330,6 +330,10 @@  static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv)
 	priv->icccr = scgd << cdf_width | cdf;
 
 	return 0;
+
+err_no_val:
+	dev_err(dev, "it is impossible to calculate best SCL\n");
+	return -EINVAL;
 }
 
 /*