| Message ID | 20231120113307.80710-5-biju.das.jz@bp.renesas.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | Add support for RZ/G2L GPT | expand |
On Mon, Nov 20, 2023 at 11:33:07AM +0000, Biju Das wrote: > The General PWM Timer (GPT) is capable of detecting "dead time error > and short-circuits between output pins" and send Output disable > request to poeg(Port Output Enable for GPT). > > Add support for linking poeg group with gpt, so that > gpt can control the output disable function. > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > --- > v16->v17: > * No change > v15->v16: > * No change. > v14->v15: > * Updated commit description by replacing "This patch add"-> "Add". > v3->v14: > * Removed the parenthesis for RZG2L_MAX_POEG_GROUPS. > * Renamed rzg2l_gpt_parse_properties()->rzg2l_gpt_poeg_init() as it not only parse > the properties but also implements the needed register writes. > * Added acomment here about the purpose of the function rzg2l_gpt_poeg_init() > * Removed magic numbers from rzg2l_gpt_poeg_init() > * Fixed resource leak in rzg2l_gpt_poeg_init(). > * Moved the patch from series[1] to here > [1] https://lore.kernel.org/linux-renesas-soc/20221215205843.4074504-1-biju.das.jz@bp.renesas.com/T/#t > v2->v3: > * Updated commit header and description > * Added check for poeg group in rzg2l_gpt_parse_properties(). > v1->v2: > * Replaced id->poeg-id as per poeg bindings. > This patch depend upon [1] > [1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20221214132232.2835828-3-biju.das.jz@bp.renesas.com/ > --- > drivers/pwm/pwm-rzg2l-gpt.c | 83 +++++++++++++++++++++++++++++++++++++ > 1 file changed, 83 insertions(+) > > diff --git a/drivers/pwm/pwm-rzg2l-gpt.c b/drivers/pwm/pwm-rzg2l-gpt.c > index 428e6e577db6..a309131db8ee 100644 > --- a/drivers/pwm/pwm-rzg2l-gpt.c > +++ b/drivers/pwm/pwm-rzg2l-gpt.c > @@ -31,6 +31,7 @@ > #define RZG2L_GTCR 0x2c > #define RZG2L_GTUDDTYC 0x30 > #define RZG2L_GTIOR 0x34 > +#define RZG2L_GTINTAD 0x38 > #define RZG2L_GTBER 0x40 > #define RZG2L_GTCNT 0x48 > #define RZG2L_GTCCRA 0x4c > @@ -48,9 +49,15 @@ > #define RZG2L_UP_COUNTING (RZG2L_GTUDDTYC_UP | RZG2L_GTUDDTYC_UDF) > > #define RZG2L_GTIOR_GTIOA GENMASK(4, 0) > +#define RZG2L_GTIOR_OADF GENMASK(10, 9) > #define RZG2L_GTIOR_GTIOB GENMASK(20, 16) > +#define RZG2L_GTIOR_OBDF GENMASK(26, 25) > #define RZG2L_GTIOR_OAE BIT(8) > #define RZG2L_GTIOR_OBE BIT(24) > +#define RZG2L_GTIOR_OADF_HIGH_IMP_ON_OUT_DISABLE BIT(9) > +#define RZG2L_GTIOR_OBDF_HIGH_IMP_ON_OUT_DISABLE BIT(25) > +#define RZG2L_GTIOR_PIN_DISABLE_SETTING \ > + (RZG2L_GTIOR_OADF_HIGH_IMP_ON_OUT_DISABLE | RZG2L_GTIOR_OBDF_HIGH_IMP_ON_OUT_DISABLE) > > #define RZG2L_INIT_OUT_LO_OUT_LO_END_TOGGLE 0x07 > #define RZG2L_INIT_OUT_HI_OUT_HI_END_TOGGLE 0x1b > @@ -64,6 +71,8 @@ > #define RZG2L_GTIOR_GTIOB_OUT_LO_END_TOGGLE_CMP_MATCH \ > (FIELD_PREP(RZG2L_GTIOR_GTIOB, RZG2L_INIT_OUT_LO_OUT_LO_END_TOGGLE) | RZG2L_GTIOR_OBE) > > +#define RZG2L_GTINTAD_GRP_MASK GENMASK(25, 24) > + > #define RZG2L_GTCCR(i) (0x4c + 4 * (i)) > > #define RZG2L_MAX_HW_CHANNELS 8 > @@ -76,6 +85,9 @@ > > #define RZG2L_GET_CH_OFFS(i) (0x100 * (i)) > > +#define RZG2L_MAX_POEG_GROUPS 4 > +#define RZG2L_LAST_POEG_GROUP 3 > + > struct rzg2l_gpt_chip { > struct pwm_chip chip; > void __iomem *mmio; > @@ -88,6 +100,7 @@ struct rzg2l_gpt_chip { > u32 user_count[RZG2L_MAX_HW_CHANNELS]; > u32 enable_count[RZG2L_MAX_HW_CHANNELS]; > DECLARE_BITMAP(ch_en_bits, RZG2L_MAX_PWM_CHANNELS); > + DECLARE_BITMAP(poeg_gpt_link, RZG2L_MAX_POEG_GROUPS * RZG2L_MAX_HW_CHANNELS); > }; > > static inline struct rzg2l_gpt_chip *to_rzg2l_gpt_chip(struct pwm_chip *chip) > @@ -454,6 +467,75 @@ static void rzg2l_gpt_reset_assert_pm_disable(void *data) > reset_control_assert(rzg2l_gpt->rstc); > } > > +/* > + * This function links a poeg group{A,B,C,D} with a gpt channel{0..7} and > + * configure the pin for output disable. > + */ > +static void rzg2l_gpt_poeg_init(struct platform_device *pdev, > + struct rzg2l_gpt_chip *rzg2l_gpt) > +{ > + struct of_phandle_args of_args; > + unsigned int i; > + u32 poeg_grp; > + u32 bitpos; > + int cells; > + u32 offs; > + int ret; > + > + cells = of_property_count_u32_elems(pdev->dev.of_node, "renesas,poegs"); > + if (cells == -EINVAL) > + return; > + > + cells >>= 1; > + for (i = 0; i < cells; i++) { > + ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, > + "renesas,poegs", 1, i, > + &of_args); If you use of_for_each_phandle() here, you don't need to determine the length first. > + if (ret) { > + dev_err(&pdev->dev, > + "Failed to parse 'renesas,poegs' property\n"); > + return; > + } > + > + if (of_args.args[0] >= RZG2L_MAX_HW_CHANNELS) { > + dev_err(&pdev->dev, "Invalid channel %d >= %d\n", > + of_args.args[0], RZG2L_MAX_HW_CHANNELS); > + of_node_put(of_args.np); > + return; > + } > + > + bitpos = of_args.args[0]; This can be moved further down, and so nearer to where it is actually used. > + if (!of_device_is_available(of_args.np)) { > + /* It's fine to have a phandle to a non-enabled poeg. */ > + of_node_put(of_args.np); > + continue; > + } Best regards Uwe
Hi Uwe, Thanks for the feedback. Sorry for the delay as I was busy with improving network performance on RZ/G2L platforms. > -----Original Message----- > From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > Sent: Monday, December 25, 2023 6:29 PM > Subject: Re: [PATCH v17 4/4] pwm: rzg2l-gpt: Add support for gpt linking > with poeg > > On Mon, Nov 20, 2023 at 11:33:07AM +0000, Biju Das wrote: > > The General PWM Timer (GPT) is capable of detecting "dead time error > > and short-circuits between output pins" and send Output disable > > request to poeg(Port Output Enable for GPT). > > > > Add support for linking poeg group with gpt, so that gpt can control > > the output disable function. > > > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > > --- > > v16->v17: > > * No change > > v15->v16: > > * No change. > > v14->v15: > > * Updated commit description by replacing "This patch add"-> "Add". > > v3->v14: > > * Removed the parenthesis for RZG2L_MAX_POEG_GROUPS. > > * Renamed rzg2l_gpt_parse_properties()->rzg2l_gpt_poeg_init() as it not > only parse > > the properties but also implements the needed register writes. > > * Added acomment here about the purpose of the function > > rzg2l_gpt_poeg_init() > > * Removed magic numbers from rzg2l_gpt_poeg_init() > > * Fixed resource leak in rzg2l_gpt_poeg_init(). > > * Moved the patch from series[1] to here [1] > > https://lore.kernel.org/linux-renesas-soc/20221215205843.4074504-1-bij > > u.das.jz@bp.renesas.com/T/#t > > v2->v3: > > * Updated commit header and description > > * Added check for poeg group in rzg2l_gpt_parse_properties(). > > v1->v2: > > * Replaced id->poeg-id as per poeg bindings. > > This patch depend upon [1] > > --- > > drivers/pwm/pwm-rzg2l-gpt.c | 83 > > +++++++++++++++++++++++++++++++++++++ > > 1 file changed, 83 insertions(+) > > > > diff --git a/drivers/pwm/pwm-rzg2l-gpt.c b/drivers/pwm/pwm-rzg2l-gpt.c > > index 428e6e577db6..a309131db8ee 100644 > > --- a/drivers/pwm/pwm-rzg2l-gpt.c > > +++ b/drivers/pwm/pwm-rzg2l-gpt.c > > @@ -31,6 +31,7 @@ > > #define RZG2L_GTCR 0x2c > > #define RZG2L_GTUDDTYC 0x30 > > #define RZG2L_GTIOR 0x34 > > +#define RZG2L_GTINTAD 0x38 > > #define RZG2L_GTBER 0x40 > > #define RZG2L_GTCNT 0x48 > > #define RZG2L_GTCCRA 0x4c > > @@ -48,9 +49,15 @@ > > #define RZG2L_UP_COUNTING (RZG2L_GTUDDTYC_UP | RZG2L_GTUDDTYC_UDF) > > > > #define RZG2L_GTIOR_GTIOA GENMASK(4, 0) > > +#define RZG2L_GTIOR_OADF GENMASK(10, 9) > > #define RZG2L_GTIOR_GTIOB GENMASK(20, 16) > > +#define RZG2L_GTIOR_OBDF GENMASK(26, 25) > > #define RZG2L_GTIOR_OAE BIT(8) > > #define RZG2L_GTIOR_OBE BIT(24) > > +#define RZG2L_GTIOR_OADF_HIGH_IMP_ON_OUT_DISABLE BIT(9) > > +#define RZG2L_GTIOR_OBDF_HIGH_IMP_ON_OUT_DISABLE BIT(25) > > +#define RZG2L_GTIOR_PIN_DISABLE_SETTING \ > > + (RZG2L_GTIOR_OADF_HIGH_IMP_ON_OUT_DISABLE | > > +RZG2L_GTIOR_OBDF_HIGH_IMP_ON_OUT_DISABLE) > > > > #define RZG2L_INIT_OUT_LO_OUT_LO_END_TOGGLE 0x07 > > #define RZG2L_INIT_OUT_HI_OUT_HI_END_TOGGLE 0x1b > > @@ -64,6 +71,8 @@ > > #define RZG2L_GTIOR_GTIOB_OUT_LO_END_TOGGLE_CMP_MATCH \ > > (FIELD_PREP(RZG2L_GTIOR_GTIOB, RZG2L_INIT_OUT_LO_OUT_LO_END_TOGGLE) > > | RZG2L_GTIOR_OBE) > > > > +#define RZG2L_GTINTAD_GRP_MASK GENMASK(25, 24) > > + > > #define RZG2L_GTCCR(i) (0x4c + 4 * (i)) > > > > #define RZG2L_MAX_HW_CHANNELS 8 > > @@ -76,6 +85,9 @@ > > > > #define RZG2L_GET_CH_OFFS(i) (0x100 * (i)) > > > > +#define RZG2L_MAX_POEG_GROUPS 4 > > +#define RZG2L_LAST_POEG_GROUP 3 > > + > > struct rzg2l_gpt_chip { > > struct pwm_chip chip; > > void __iomem *mmio; > > @@ -88,6 +100,7 @@ struct rzg2l_gpt_chip { > > u32 user_count[RZG2L_MAX_HW_CHANNELS]; > > u32 enable_count[RZG2L_MAX_HW_CHANNELS]; > > DECLARE_BITMAP(ch_en_bits, RZG2L_MAX_PWM_CHANNELS); > > + DECLARE_BITMAP(poeg_gpt_link, RZG2L_MAX_POEG_GROUPS * > > +RZG2L_MAX_HW_CHANNELS); > > }; > > > > static inline struct rzg2l_gpt_chip *to_rzg2l_gpt_chip(struct > > pwm_chip *chip) @@ -454,6 +467,75 @@ static void > rzg2l_gpt_reset_assert_pm_disable(void *data) > > reset_control_assert(rzg2l_gpt->rstc); > > } > > > > +/* > > + * This function links a poeg group{A,B,C,D} with a gpt channel{0..7} > > +and > > + * configure the pin for output disable. > > + */ > > +static void rzg2l_gpt_poeg_init(struct platform_device *pdev, > > + struct rzg2l_gpt_chip *rzg2l_gpt) { > > + struct of_phandle_args of_args; > > + unsigned int i; > > + u32 poeg_grp; > > + u32 bitpos; > > + int cells; > > + u32 offs; > > + int ret; > > + > > + cells = of_property_count_u32_elems(pdev->dev.of_node, > "renesas,poegs"); > > + if (cells == -EINVAL) > > + return; > > + > > + cells >>= 1; > > + for (i = 0; i < cells; i++) { > > + ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, > > + "renesas,poegs", 1, i, > > + &of_args); > > If you use of_for_each_phandle() here, you don't need to determine the > length first. of_for_each_phandle() will iterate 6 times for the below[1] list of phandle and channel index pair tuples. What I need is just loop 3 times and get the poeg_group and gpt_channel from it. So, determining length is simpler than looping 6 times. So, are you ok with existing logic? [1] renesas,poegs = <&poeggd 4>, <&poeggb 1>, <&poegga 2>; > > > + if (ret) { > > + dev_err(&pdev->dev, > > + "Failed to parse 'renesas,poegs' property\n"); > > + return; > > + } > > + > > + if (of_args.args[0] >= RZG2L_MAX_HW_CHANNELS) { > > + dev_err(&pdev->dev, "Invalid channel %d >= %d\n", > > + of_args.args[0], RZG2L_MAX_HW_CHANNELS); > > + of_node_put(of_args.np); > > + return; > > + } > > + > > + bitpos = of_args.args[0]; > > This can be moved further down, and so nearer to where it is actually > used. OK Cheers, Biju
diff --git a/drivers/pwm/pwm-rzg2l-gpt.c b/drivers/pwm/pwm-rzg2l-gpt.c index 428e6e577db6..a309131db8ee 100644 --- a/drivers/pwm/pwm-rzg2l-gpt.c +++ b/drivers/pwm/pwm-rzg2l-gpt.c @@ -31,6 +31,7 @@ #define RZG2L_GTCR 0x2c #define RZG2L_GTUDDTYC 0x30 #define RZG2L_GTIOR 0x34 +#define RZG2L_GTINTAD 0x38 #define RZG2L_GTBER 0x40 #define RZG2L_GTCNT 0x48 #define RZG2L_GTCCRA 0x4c @@ -48,9 +49,15 @@ #define RZG2L_UP_COUNTING (RZG2L_GTUDDTYC_UP | RZG2L_GTUDDTYC_UDF) #define RZG2L_GTIOR_GTIOA GENMASK(4, 0) +#define RZG2L_GTIOR_OADF GENMASK(10, 9) #define RZG2L_GTIOR_GTIOB GENMASK(20, 16) +#define RZG2L_GTIOR_OBDF GENMASK(26, 25) #define RZG2L_GTIOR_OAE BIT(8) #define RZG2L_GTIOR_OBE BIT(24) +#define RZG2L_GTIOR_OADF_HIGH_IMP_ON_OUT_DISABLE BIT(9) +#define RZG2L_GTIOR_OBDF_HIGH_IMP_ON_OUT_DISABLE BIT(25) +#define RZG2L_GTIOR_PIN_DISABLE_SETTING \ + (RZG2L_GTIOR_OADF_HIGH_IMP_ON_OUT_DISABLE | RZG2L_GTIOR_OBDF_HIGH_IMP_ON_OUT_DISABLE) #define RZG2L_INIT_OUT_LO_OUT_LO_END_TOGGLE 0x07 #define RZG2L_INIT_OUT_HI_OUT_HI_END_TOGGLE 0x1b @@ -64,6 +71,8 @@ #define RZG2L_GTIOR_GTIOB_OUT_LO_END_TOGGLE_CMP_MATCH \ (FIELD_PREP(RZG2L_GTIOR_GTIOB, RZG2L_INIT_OUT_LO_OUT_LO_END_TOGGLE) | RZG2L_GTIOR_OBE) +#define RZG2L_GTINTAD_GRP_MASK GENMASK(25, 24) + #define RZG2L_GTCCR(i) (0x4c + 4 * (i)) #define RZG2L_MAX_HW_CHANNELS 8 @@ -76,6 +85,9 @@ #define RZG2L_GET_CH_OFFS(i) (0x100 * (i)) +#define RZG2L_MAX_POEG_GROUPS 4 +#define RZG2L_LAST_POEG_GROUP 3 + struct rzg2l_gpt_chip { struct pwm_chip chip; void __iomem *mmio; @@ -88,6 +100,7 @@ struct rzg2l_gpt_chip { u32 user_count[RZG2L_MAX_HW_CHANNELS]; u32 enable_count[RZG2L_MAX_HW_CHANNELS]; DECLARE_BITMAP(ch_en_bits, RZG2L_MAX_PWM_CHANNELS); + DECLARE_BITMAP(poeg_gpt_link, RZG2L_MAX_POEG_GROUPS * RZG2L_MAX_HW_CHANNELS); }; static inline struct rzg2l_gpt_chip *to_rzg2l_gpt_chip(struct pwm_chip *chip) @@ -454,6 +467,75 @@ static void rzg2l_gpt_reset_assert_pm_disable(void *data) reset_control_assert(rzg2l_gpt->rstc); } +/* + * This function links a poeg group{A,B,C,D} with a gpt channel{0..7} and + * configure the pin for output disable. + */ +static void rzg2l_gpt_poeg_init(struct platform_device *pdev, + struct rzg2l_gpt_chip *rzg2l_gpt) +{ + struct of_phandle_args of_args; + unsigned int i; + u32 poeg_grp; + u32 bitpos; + int cells; + u32 offs; + int ret; + + cells = of_property_count_u32_elems(pdev->dev.of_node, "renesas,poegs"); + if (cells == -EINVAL) + return; + + cells >>= 1; + for (i = 0; i < cells; i++) { + ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, + "renesas,poegs", 1, i, + &of_args); + if (ret) { + dev_err(&pdev->dev, + "Failed to parse 'renesas,poegs' property\n"); + return; + } + + if (of_args.args[0] >= RZG2L_MAX_HW_CHANNELS) { + dev_err(&pdev->dev, "Invalid channel %d >= %d\n", + of_args.args[0], RZG2L_MAX_HW_CHANNELS); + of_node_put(of_args.np); + return; + } + + bitpos = of_args.args[0]; + if (!of_device_is_available(of_args.np)) { + /* It's fine to have a phandle to a non-enabled poeg. */ + of_node_put(of_args.np); + continue; + } + + if (!of_property_read_u32(of_args.np, "renesas,poeg-id", &poeg_grp)) { + offs = RZG2L_GET_CH_OFFS(of_args.args[0]); + if (poeg_grp > RZG2L_LAST_POEG_GROUP) { + dev_err(&pdev->dev, "Invalid poeg group %d > %d\n", + poeg_grp, RZG2L_LAST_POEG_GROUP); + of_node_put(of_args.np); + return; + } + + bitpos += poeg_grp * RZG2L_MAX_HW_CHANNELS; + set_bit(bitpos, rzg2l_gpt->poeg_gpt_link); + + rzg2l_gpt_modify(rzg2l_gpt, offs + RZG2L_GTINTAD, + RZG2L_GTINTAD_GRP_MASK, + poeg_grp << 24); + + rzg2l_gpt_modify(rzg2l_gpt, offs + RZG2L_GTIOR, + RZG2L_GTIOR_OBDF | RZG2L_GTIOR_OADF, + RZG2L_GTIOR_PIN_DISABLE_SETTING); + } + + of_node_put(of_args.np); + } +} + static int rzg2l_gpt_probe(struct platform_device *pdev) { struct rzg2l_gpt_chip *rzg2l_gpt; @@ -520,6 +602,7 @@ static int rzg2l_gpt_probe(struct platform_device *pdev) } } + rzg2l_gpt_poeg_init(pdev, rzg2l_gpt); mutex_init(&rzg2l_gpt->lock); platform_set_drvdata(pdev, rzg2l_gpt); rzg2l_gpt->chip.dev = &pdev->dev;
The General PWM Timer (GPT) is capable of detecting "dead time error and short-circuits between output pins" and send Output disable request to poeg(Port Output Enable for GPT). Add support for linking poeg group with gpt, so that gpt can control the output disable function. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- v16->v17: * No change v15->v16: * No change. v14->v15: * Updated commit description by replacing "This patch add"-> "Add". v3->v14: * Removed the parenthesis for RZG2L_MAX_POEG_GROUPS. * Renamed rzg2l_gpt_parse_properties()->rzg2l_gpt_poeg_init() as it not only parse the properties but also implements the needed register writes. * Added acomment here about the purpose of the function rzg2l_gpt_poeg_init() * Removed magic numbers from rzg2l_gpt_poeg_init() * Fixed resource leak in rzg2l_gpt_poeg_init(). * Moved the patch from series[1] to here [1] https://lore.kernel.org/linux-renesas-soc/20221215205843.4074504-1-biju.das.jz@bp.renesas.com/T/#t v2->v3: * Updated commit header and description * Added check for poeg group in rzg2l_gpt_parse_properties(). v1->v2: * Replaced id->poeg-id as per poeg bindings. This patch depend upon [1] [1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20221214132232.2835828-3-biju.das.jz@bp.renesas.com/ --- drivers/pwm/pwm-rzg2l-gpt.c | 83 +++++++++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+)