diff mbox series

[v1,02/18] thermal: Add new structures and thermal_zone_device_register()

Message ID 20240130111250.185718-3-angelogioacchino.delregno@collabora.com (mailing list archive)
State Awaiting Upstream
Delegated to: Geert Uytterhoeven
Headers show
Series Thermal: Part 1 - Introduce new structs and registration | expand

Commit Message

AngeloGioacchino Del Regno Jan. 30, 2024, 11:12 a.m. UTC
In preparation for extending the thermal zone devices to actually
have a name and disambiguate thermal zone types/names, and to do
a reorganization in thermal_zone_device, add some new Thermal Zone
structures:

Introduce new thermal_governor_params, thermal_zone_platform_params
and thermal_zone_device_params structures which are meant to hold
the parameters for thermal zone registration and, in the future, to
stop having a catch-all thermal_zone_device structure.

While at it, also add a new thermal_zone_device_register() function
which uses the new structure(s) for registration;
the now old functions thermal_tripless_zone_device_register() and
thermal_zone_device_register_with_trips() are now advertised as
being deprecated and changed to instead act as wrappers around the
new thermal_zone_device_register().

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/thermal/gov_power_allocator.c |  38 +++----
 drivers/thermal/qcom/tsens.c          |   4 +-
 drivers/thermal/thermal_core.c        | 146 ++++++++++++++++++--------
 drivers/thermal/thermal_helpers.c     |   8 +-
 drivers/thermal/thermal_sysfs.c       |  16 +--
 include/linux/thermal.h               |  73 +++++++++++--
 6 files changed, 202 insertions(+), 83 deletions(-)

Comments

Geert Uytterhoeven Jan. 30, 2024, 1:26 p.m. UTC | #1
Hi Angelo,

On Tue, Jan 30, 2024 at 12:13 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com> wrote:
> In preparation for extending the thermal zone devices to actually
> have a name and disambiguate thermal zone types/names, and to do
> a reorganization in thermal_zone_device, add some new Thermal Zone
> structures:
>
> Introduce new thermal_governor_params, thermal_zone_platform_params
> and thermal_zone_device_params structures which are meant to hold
> the parameters for thermal zone registration and, in the future, to
> stop having a catch-all thermal_zone_device structure.
>
> While at it, also add a new thermal_zone_device_register() function
> which uses the new structure(s) for registration;
> the now old functions thermal_tripless_zone_device_register() and
> thermal_zone_device_register_with_trips() are now advertised as
> being deprecated and changed to instead act as wrappers around the
> new thermal_zone_device_register().
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Thanks for your patch!

> ---
>  drivers/thermal/gov_power_allocator.c |  38 +++----
>  drivers/thermal/qcom/tsens.c          |   4 +-
>  drivers/thermal/thermal_core.c        | 146 ++++++++++++++++++--------
>  drivers/thermal/thermal_helpers.c     |   8 +-
>  drivers/thermal/thermal_sysfs.c       |  16 +--
>  include/linux/thermal.h               |  73 +++++++++++--
>  6 files changed, 202 insertions(+), 83 deletions(-)

This also needs an update to the documentation, which still refers to
the old function removed in commit edd220b33f479cf9 ("thermal: core:
Drop thermal_zone_device_register()") in v6.6.:

Documentation/driver-api/thermal/power_allocator.rst:`thermal_zone_device_register()`
Documentation/driver-api/thermal/power_allocator.rst:`thermal_zone_device_register()`
(i.e., platform code), then weights
Documentation/driver-api/thermal/sysfs-api.rst:
*thermal_zone_device_register(char *type,

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Rafael J. Wysocki Feb. 1, 2024, 7:24 p.m. UTC | #2
On Tue, Jan 30, 2024 at 12:13 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com> wrote:
>
> In preparation for extending the thermal zone devices to actually
> have a name and disambiguate thermal zone types/names, and to do
> a reorganization in thermal_zone_device, add some new Thermal Zone
> structures:
>
> Introduce new thermal_governor_params, thermal_zone_platform_params
> and thermal_zone_device_params structures which are meant to hold
> the parameters for thermal zone registration and, in the future, to
> stop having a catch-all thermal_zone_device structure.
>
> While at it, also add a new thermal_zone_device_register() function
> which uses the new structure(s) for registration;
> the now old functions thermal_tripless_zone_device_register() and
> thermal_zone_device_register_with_trips() are now advertised as
> being deprecated and changed to instead act as wrappers around the
> new thermal_zone_device_register().
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
>  drivers/thermal/gov_power_allocator.c |  38 +++----
>  drivers/thermal/qcom/tsens.c          |   4 +-
>  drivers/thermal/thermal_core.c        | 146 ++++++++++++++++++--------
>  drivers/thermal/thermal_helpers.c     |   8 +-
>  drivers/thermal/thermal_sysfs.c       |  16 +--
>  include/linux/thermal.h               |  73 +++++++++++--
>  6 files changed, 202 insertions(+), 83 deletions(-)
>
> diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
> index 81e061f183ad..3efbc60cd148 100644
> --- a/drivers/thermal/gov_power_allocator.c
> +++ b/drivers/thermal/gov_power_allocator.c
> @@ -167,14 +167,14 @@ static void estimate_pid_constants(struct thermal_zone_device *tz,
>         if (!temperature_threshold)
>                 return;
>
> -       tz->tzp->k_po = int_to_frac(sustainable_power) /
> +       tz->tgp->ipa_params.k_po = int_to_frac(sustainable_power) /

This is getting hard to read.

I would at least introduce a local zone_ipa_params and use it to refer
to this field:

zone_ipa_params->K-no = int_to_frac(sustainable_power) / temperature_threshold;

and analogously below.

>                 temperature_threshold;
>
> -       tz->tzp->k_pu = int_to_frac(2 * sustainable_power) /
> +       tz->tgp->ipa_params.k_pu = int_to_frac(2 * sustainable_power) /
>                 temperature_threshold;
>
> -       k_i = tz->tzp->k_pu / 10;
> -       tz->tzp->k_i = k_i > 0 ? k_i : 1;
> +       k_i = tz->tgp->ipa_params.k_pu / 10;
> +       tz->tgp->ipa_params.k_i = k_i > 0 ? k_i : 1;
>
>         /*
>          * The default for k_d and integral_cutoff is 0, so we can
> @@ -199,10 +199,10 @@ static u32 get_sustainable_power(struct thermal_zone_device *tz,
>  {
>         u32 sustainable_power;
>
> -       if (!tz->tzp->sustainable_power)
> +       if (!tz->tgp->ipa_params.sustainable_power)
>                 sustainable_power = estimate_sustainable_power(tz);
>         else
> -               sustainable_power = tz->tzp->sustainable_power;
> +               sustainable_power = tz->tgp->ipa_params.sustainable_power;
>
>         /* Check if it's init value 0 or there was update via sysfs */
>         if (sustainable_power != params->sustainable_power) {
> @@ -210,7 +210,7 @@ static u32 get_sustainable_power(struct thermal_zone_device *tz,
>                                        params->trip_switch_on, control_temp);
>
>                 /* Do the estimation only once and make available in sysfs */
> -               tz->tzp->sustainable_power = sustainable_power;
> +               tz->tgp->ipa_params.sustainable_power = sustainable_power;
>                 params->sustainable_power = sustainable_power;
>         }
>
> @@ -252,7 +252,7 @@ static u32 pid_controller(struct thermal_zone_device *tz,
>         err = int_to_frac(err);
>
>         /* Calculate the proportional term */
> -       p = mul_frac(err < 0 ? tz->tzp->k_po : tz->tzp->k_pu, err);
> +       p = mul_frac(err < 0 ? tz->tgp->ipa_params.k_po : tz->tgp->ipa_params.k_pu, err);
>
>         /*
>          * Calculate the integral term
> @@ -260,10 +260,10 @@ static u32 pid_controller(struct thermal_zone_device *tz,
>          * if the error is less than cut off allow integration (but
>          * the integral is limited to max power)
>          */
> -       i = mul_frac(tz->tzp->k_i, params->err_integral);
> +       i = mul_frac(tz->tgp->ipa_params.k_i, params->err_integral);
>
> -       if (err < int_to_frac(tz->tzp->integral_cutoff)) {
> -               s64 i_next = i + mul_frac(tz->tzp->k_i, err);
> +       if (err < int_to_frac(tz->tgp->ipa_params.integral_cutoff)) {
> +               s64 i_next = i + mul_frac(tz->tgp->ipa_params.k_i, err);
>
>                 if (abs(i_next) < max_power_frac) {
>                         i = i_next;
> @@ -278,7 +278,7 @@ static u32 pid_controller(struct thermal_zone_device *tz,
>          * error (i.e. driving closer to the line) results in less
>          * power being applied, slowing down the controller)
>          */
> -       d = mul_frac(tz->tzp->k_d, err - params->prev_err);
> +       d = mul_frac(tz->tgp->ipa_params.k_d, err - params->prev_err);
>         d = div_frac(d, jiffies_to_msecs(tz->passive_delay_jiffies));
>         params->prev_err = err;
>
> @@ -699,9 +699,9 @@ static int power_allocator_bind(struct thermal_zone_device *tz)
>                 return ret;
>         }
>
> -       if (!tz->tzp) {
> -               tz->tzp = kzalloc(sizeof(*tz->tzp), GFP_KERNEL);
> -               if (!tz->tzp) {
> +       if (!tz->tgp) {
> +               tz->tgp = kzalloc(sizeof(*tz->tgp), GFP_KERNEL);
> +               if (!tz->tgp) {
>                         ret = -ENOMEM;
>                         goto free_params;
>                 }
> @@ -709,10 +709,10 @@ static int power_allocator_bind(struct thermal_zone_device *tz)
>                 params->allocated_tzp = true;
>         }
>
> -       if (!tz->tzp->sustainable_power)
> +       if (!tz->tgp->ipa_params.sustainable_power)
>                 dev_warn(&tz->device, "power_allocator: sustainable_power will be estimated\n");
>
> -       estimate_pid_constants(tz, tz->tzp->sustainable_power,
> +       estimate_pid_constants(tz, tz->tgp->ipa_params.sustainable_power,
>                                params->trip_switch_on,
>                                params->trip_max->temperature);
>
> @@ -736,8 +736,8 @@ static void power_allocator_unbind(struct thermal_zone_device *tz)
>         dev_dbg(&tz->device, "Unbinding from thermal zone %d\n", tz->id);
>
>         if (params->allocated_tzp) {
> -               kfree(tz->tzp);
> -               tz->tzp = NULL;
> +               kfree(tz->tgp);
> +               tz->tgp = NULL;
>         }
>
>         kfree(params->power);
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 6d7c16ccb44d..9eddac93d683 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -252,8 +252,8 @@ int tsens_read_calibration_legacy(struct tsens_priv *priv,
>  /*
>   * Use this function on devices where slope and offset calculations
>   * depend on calibration data read from qfprom. On others the slope
> - * and offset values are derived from tz->tzp->slope and tz->tzp->offset
> - * resp.
> + * and offset values are derived from tz->tgp->ipa_params.slope and
> + * tz->tgp->ipa_params.offset resp.
>   */
>  void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
>                              u32 *p2, u32 mode)
> diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
> index dfaa6341694a..3150475b947f 100644
> --- a/drivers/thermal/thermal_core.c
> +++ b/drivers/thermal/thermal_core.c
> @@ -141,13 +141,13 @@ int thermal_register_governor(struct thermal_governor *governor)
>
>         list_for_each_entry(pos, &thermal_tz_list, node) {
>                 /*
> -                * only thermal zones with specified tz->tzp->governor_name
> +                * only thermal zones with specified tz->tgp->governor_name
>                  * may run with tz->govenor unset
>                  */
>                 if (pos->governor)
>                         continue;
>
> -               name = pos->tzp->governor_name;
> +               name = pos->tgp->governor_name;
>
>                 if (!strncasecmp(name, governor->name, THERMAL_NAME_LENGTH)) {
>                         int ret;
> @@ -1261,6 +1261,8 @@ EXPORT_SYMBOL_GPL(thermal_zone_get_crit_temp);
>   *                whether trip points have been crossed (0 for interrupt
>   *                driven systems)
>   *
> + * This function is deprecated. See thermal_zone_device_register().
> + *
>   * This interface function adds a new thermal zone device (sensor) to
>   * /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
>   * thermal cooling devices registered at the same time.
> @@ -1277,19 +1279,80 @@ thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
>                                         const struct thermal_zone_params *tzp, int passive_delay,
>                                         int polling_delay)
>  {
> +       struct thermal_zone_device_params tzdp = {
> +               /* Thermal Zone Platform parameters */
> +               .tzp = {
> +                       .type = type,
> +                       .ops = ops,
> +                       .trips = trips,
> +                       .num_trips = num_trips,
> +                       .mask = mask,

I'm not sure about trips, num_trips and mask.

In the future, trips and mask will only be used once during zone
registration (and mask will probably go away entirely at one point)
and num_trips defines the shape of the zone, so to speak, so it makes
sense to pass it directly in the arg list.

> +                       .passive_delay = passive_delay,
> +                       .polling_delay = polling_delay,
> +                       .devdata = devdata
> +               },
> +       };
>         struct thermal_zone_device *tz;
> +
> +       /* Thermal Zone Governor parameters */
> +       if (tzp) {
> +               tzdp.tgp = kzalloc(sizeof(*tzdp.tgp), GFP_KERNEL);
> +               if (!tzdp.tgp)
> +                       return ERR_PTR(-ENOMEM);
> +
> +               tzdp.tgp->governor_name = tzp->governor_name;
> +               tzdp.tzp.no_hwmon = tzp->no_hwmon;
> +               memcpy(&tzdp.tgp->ipa_params, tzp, sizeof(*tzp));
> +       }
> +
> +       tz = thermal_zone_device_register(&tzdp);
> +       kfree(tzdp.tgp);
> +       return tz;
> +}
> +EXPORT_SYMBOL_GPL(thermal_zone_device_register_with_trips);
> +
> +/* This function is deprecated. See thermal_zone_device_register(). */

I'm not sure why you want to deprecate this function.

Tripless thermal zones are a special case and it makes sense to me to
register them in a special way.

> +struct thermal_zone_device *thermal_tripless_zone_device_register(
> +                                       const char *type,
> +                                       void *devdata,
> +                                       struct thermal_zone_device_ops *ops,
> +                                       const struct thermal_zone_params *tzp)
> +{
> +       return thermal_zone_device_register_with_trips(type, NULL, 0, 0, devdata,
> +                                                      ops, tzp, 0, 0);
> +}
> +EXPORT_SYMBOL_GPL(thermal_tripless_zone_device_register);
> +
> +/**
> + * thermal_zone_device_register() - register a new thermal zone device
> + * @tzdp:      Parameters of the new thermal zone device
> + *             See struct thermal_zone_device_register.

I don't quite agree that passing just one argument to this function is
an improvement.

First off, it is better to pass some values in the arg list just
because they will be only used once during registration and so it is
not useful to store them within the thermal zone object.  I mentioned
trips and mask above, but type is also copied into the thermal zone
object, so why to store a pointer to the original string?

> + *
> + * This interface function adds a new thermal zone device (sensor) to
> + * /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
> + * thermal cooling devices registered at the same time.
> + * thermal_zone_device_unregister() must be called when the device is no
> + * longer needed. The passive cooling depends on the .get_trend() return value.
> + *
> + * Return: a pointer to the created struct thermal_zone_device or an
> + * in case of error, an ERR_PTR. Caller must check return value with
> + * IS_ERR*() helpers.
> + */
> +struct thermal_zone_device *thermal_zone_device_register(struct thermal_zone_device_params *tzdp)
> +{
> +       struct thermal_zone_device *tz;
> +       struct thermal_governor *gov;
>         int id;
>         int result;
> -       struct thermal_governor *governor;
>
> -       if (!type || strlen(type) == 0) {
> +       if (!tzdp->tzp.type || strlen(tzdp->tzp.type) == 0) {
>                 pr_err("No thermal zone type defined\n");
>                 return ERR_PTR(-EINVAL);
>         }
>
> -       if (strlen(type) >= THERMAL_NAME_LENGTH) {
> +       if (strlen(tzdp->tzp.type) >= THERMAL_NAME_LENGTH) {
>                 pr_err("Thermal zone name (%s) too long, should be under %d chars\n",
> -                      type, THERMAL_NAME_LENGTH);
> +                      tzdp->tzp.type, THERMAL_NAME_LENGTH);
>                 return ERR_PTR(-EINVAL);
>         }
>
> @@ -1306,17 +1369,19 @@ thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
>          * Check will be true when the bit 31 of the mask is set.
>          * 32 bit shift will cause overflow of 4 byte integer.
>          */
> -       if (num_trips > (BITS_PER_TYPE(int) - 1) || num_trips < 0 || mask >> num_trips) {
> +       if (tzdp->tzp.num_trips > (BITS_PER_TYPE(int) - 1) ||
> +           tzdp->tzp.num_trips < 0 ||
> +           tzdp->tzp.mask >> tzdp->tzp.num_trips) {
>                 pr_err("Incorrect number of thermal trips\n");
>                 return ERR_PTR(-EINVAL);
>         }
>
> -       if (!ops || !ops->get_temp) {
> +       if (!tzdp->tzp.ops || !tzdp->tzp.ops->get_temp) {
>                 pr_err("Thermal zone device ops not defined\n");
>                 return ERR_PTR(-EINVAL);
>         }
>
> -       if (num_trips > 0 && !trips)
> +       if (tzdp->tzp.num_trips > 0 && !tzdp->tzp.trips)
>                 return ERR_PTR(-EINVAL);
>
>         if (!thermal_class)
> @@ -1326,11 +1391,17 @@ thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
>         if (!tz)
>                 return ERR_PTR(-ENOMEM);
>
> -       if (tzp) {
> -               tz->tzp = kmemdup(tzp, sizeof(*tzp), GFP_KERNEL);
> -               if (!tz->tzp) {
> +       tz->tzp = kmemdup(&tzdp->tzp, sizeof(tzdp->tzp), GFP_KERNEL);
> +       if (!tz->tzp) {
> +               result = -ENOMEM;
> +               goto free_tz;
> +       }
> +
> +       if (tzdp->tgp) {
> +               tz->tgp = kmemdup(tzdp->tgp, sizeof(*tzdp->tgp), GFP_KERNEL);
> +               if (!tz->tgp) {
>                         result = -ENOMEM;
> -                       goto free_tz;
> +                       goto free_tzp;
>                 }
>         }
>
> @@ -1342,27 +1413,27 @@ thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
>         id = ida_alloc(&thermal_tz_ida, GFP_KERNEL);
>         if (id < 0) {
>                 result = id;
> -               goto free_tzp;
> +               goto free_tgp;
>         }
>
>         tz->id = id;
> -       strscpy(tz->type, type, sizeof(tz->type));
> +       strscpy(tz->type, tzdp->tzp.type, sizeof(tz->type));
>
> -       if (!ops->critical)
> -               ops->critical = thermal_zone_device_critical;
> +       if (!tzdp->tzp.ops->critical)
> +               tzdp->tzp.ops->critical = thermal_zone_device_critical;
>
> -       tz->ops = ops;
> +       tz->ops = tzdp->tzp.ops;
>         tz->device.class = thermal_class;
> -       tz->devdata = devdata;
> -       tz->trips = trips;
> -       tz->num_trips = num_trips;
> +       tz->devdata = tzdp->tzp.devdata;
> +       tz->trips = tzdp->tzp.trips;
> +       tz->num_trips = tzdp->tzp.num_trips;
>
> -       thermal_set_delay_jiffies(&tz->passive_delay_jiffies, passive_delay);
> -       thermal_set_delay_jiffies(&tz->polling_delay_jiffies, polling_delay);
> +       thermal_set_delay_jiffies(&tz->passive_delay_jiffies, tzdp->tzp.passive_delay);
> +       thermal_set_delay_jiffies(&tz->polling_delay_jiffies, tzdp->tzp.polling_delay);
>
>         /* sys I/F */
>         /* Add nodes that are always present via .groups */
> -       result = thermal_zone_create_device_groups(tz, mask);
> +       result = thermal_zone_create_device_groups(tz, tzdp->tzp.mask);
>         if (result)
>                 goto remove_id;
>
> @@ -1381,12 +1452,12 @@ thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
>         /* Update 'this' zone's governor information */
>         mutex_lock(&thermal_governor_lock);
>
> -       if (tz->tzp)
> -               governor = __find_governor(tz->tzp->governor_name);
> +       if (tzdp->tgp)
> +               gov = __find_governor(tzdp->tgp->governor_name);
>         else
> -               governor = def_governor;
> +               gov = def_governor;
>
> -       result = thermal_set_governor(tz, governor);
> +       result = thermal_set_governor(tz, gov);
>         if (result) {
>                 mutex_unlock(&thermal_governor_lock);
>                 goto unregister;
> @@ -1394,7 +1465,7 @@ thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
>
>         mutex_unlock(&thermal_governor_lock);
>
> -       if (!tz->tzp || !tz->tzp->no_hwmon) {
> +       if (!tzdp->tzp.no_hwmon) {
>                 result = thermal_add_hwmon_sysfs(tz);
>                 if (result)
>                         goto unregister;
> @@ -1426,24 +1497,15 @@ thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
>         put_device(&tz->device);
>  remove_id:
>         ida_free(&thermal_tz_ida, id);
> +free_tgp:
> +       kfree(tz->tgp);
>  free_tzp:
>         kfree(tz->tzp);
>  free_tz:
>         kfree(tz);
>         return ERR_PTR(result);
>  }
> -EXPORT_SYMBOL_GPL(thermal_zone_device_register_with_trips);
> -
> -struct thermal_zone_device *thermal_tripless_zone_device_register(
> -                                       const char *type,
> -                                       void *devdata,
> -                                       struct thermal_zone_device_ops *ops,
> -                                       const struct thermal_zone_params *tzp)
> -{
> -       return thermal_zone_device_register_with_trips(type, NULL, 0, 0, devdata,
> -                                                      ops, tzp, 0, 0);
> -}
> -EXPORT_SYMBOL_GPL(thermal_tripless_zone_device_register);
> +EXPORT_SYMBOL_GPL(thermal_zone_device_register);
>
>  void *thermal_zone_device_priv(struct thermal_zone_device *tzd)
>  {
> @@ -1514,7 +1576,7 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
>
>         device_del(&tz->device);
>
> -       kfree(tz->tzp);
> +       kfree(tz->tgp);
>
>         put_device(&tz->device);
>
> diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
> index 0329f4a71b02..a72095cfb771 100644
> --- a/drivers/thermal/thermal_helpers.c
> +++ b/drivers/thermal/thermal_helpers.c
> @@ -211,8 +211,8 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev)
>   */
>  int thermal_zone_get_slope(struct thermal_zone_device *tz)
>  {
> -       if (tz && tz->tzp)
> -               return tz->tzp->slope;
> +       if (tz && tz->tgp)
> +               return tz->tgp->ipa_params.slope;
>         return 1;
>  }
>  EXPORT_SYMBOL_GPL(thermal_zone_get_slope);
> @@ -226,8 +226,8 @@ EXPORT_SYMBOL_GPL(thermal_zone_get_slope);
>   */
>  int thermal_zone_get_offset(struct thermal_zone_device *tz)
>  {
> -       if (tz && tz->tzp)
> -               return tz->tzp->offset;
> +       if (tz && tz->tgp)
> +               return tz->tgp->ipa_params.offset;
>         return 0;
>  }
>  EXPORT_SYMBOL_GPL(thermal_zone_get_offset);
> diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
> index f4033865b093..3f5f4a04a754 100644
> --- a/drivers/thermal/thermal_sysfs.c
> +++ b/drivers/thermal/thermal_sysfs.c
> @@ -271,8 +271,8 @@ sustainable_power_show(struct device *dev, struct device_attribute *devattr,
>  {
>         struct thermal_zone_device *tz = to_thermal_zone(dev);
>
> -       if (tz->tzp)
> -               return sprintf(buf, "%u\n", tz->tzp->sustainable_power);
> +       if (tz->tgp)
> +               return sprintf(buf, "%u\n", tz->tgp->ipa_params.sustainable_power);
>         else
>                 return -EIO;
>  }
> @@ -284,13 +284,13 @@ sustainable_power_store(struct device *dev, struct device_attribute *devattr,
>         struct thermal_zone_device *tz = to_thermal_zone(dev);
>         u32 sustainable_power;
>
> -       if (!tz->tzp)
> +       if (!tz->tgp)
>                 return -EIO;
>
>         if (kstrtou32(buf, 10, &sustainable_power))
>                 return -EINVAL;
>
> -       tz->tzp->sustainable_power = sustainable_power;
> +       tz->tgp->ipa_params.sustainable_power = sustainable_power;
>
>         return count;
>  }
> @@ -302,8 +302,8 @@ sustainable_power_store(struct device *dev, struct device_attribute *devattr,
>         {                                                               \
>         struct thermal_zone_device *tz = to_thermal_zone(dev);          \
>                                                                         \
> -       if (tz->tzp)                                                    \
> -               return sprintf(buf, "%d\n", tz->tzp->name);             \
> +       if (tz->tgp)                                                    \
> +               return sprintf(buf, "%d\n", tz->tgp->ipa_params.name);  \
>         else                                                            \
>                 return -EIO;                                            \
>         }                                                               \
> @@ -315,13 +315,13 @@ sustainable_power_store(struct device *dev, struct device_attribute *devattr,
>                 struct thermal_zone_device *tz = to_thermal_zone(dev);  \
>                 s32 value;                                              \
>                                                                         \
> -               if (!tz->tzp)                                           \
> +               if (!tz->tgp)                                           \
>                         return -EIO;                                    \
>                                                                         \
>                 if (kstrtos32(buf, 10, &value))                         \
>                         return -EINVAL;                                 \
>                                                                         \
> -               tz->tzp->name = value;                                  \
> +               tz->tgp->ipa_params.name = value;                       \
>                                                                         \
>                 return count;                                           \
>         }                                                               \
> diff --git a/include/linux/thermal.h b/include/linux/thermal.h
> index 65d8f92a9a0d..7a540b746703 100644
> --- a/include/linux/thermal.h
> +++ b/include/linux/thermal.h
> @@ -149,7 +149,8 @@ struct thermal_cooling_device {
>                         passive trip point.
>   * @need_update:       if equals 1, thermal_zone_device_update needs to be invoked.
>   * @ops:       operations this &thermal_zone_device supports
> - * @tzp:       thermal zone parameters
> + * @tzp:               Thermal zone parameters
> + * @tgp:               Thermal zone governor parameters
>   * @governor:  pointer to the governor for this thermal zone
>   * @governor_data:     private pointer for governor data
>   * @thermal_instances: list of &struct thermal_instance of this thermal zone
> @@ -184,7 +185,8 @@ struct thermal_zone_device {
>         int prev_high_trip;
>         atomic_t need_update;
>         struct thermal_zone_device_ops *ops;
> -       struct thermal_zone_params *tzp;
> +       struct thermal_zone_platform_params *tzp;
> +       struct thermal_governor_params *tgp;

I agree with doing a split here, but I'm not sure about moving items
from the arg list to struct thermal_zone_platform_params (as mentioned
above).

Also the naming is quite inconsistent.  IMO it would be better to call
the first pointer "tzpp", rename struct thermal_governor_params to
struct thermal_zone_governor_params and call the second pointer
"tzgp".

>         struct thermal_governor *governor;
>         void *governor_data;
>         struct list_head thermal_instances;
> @@ -224,15 +226,12 @@ struct thermal_governor {
>         struct list_head        governor_list;
>  };
>
> -/* Structure to define Thermal Zone parameters */
> +/* Structure to define Thermal Zone IPA parameters */
>  struct thermal_zone_params {
> +       /* Scheduled for removal - see struct thermal_governor_params. */
>         const char *governor_name;
>
> -       /*
> -        * a boolean to indicate if the thermal to hwmon sysfs interface
> -        * is required. when no_hwmon == false, a hwmon sysfs interface
> -        * will be created. when no_hwmon == true, nothing will be done
> -        */
> +       /* Scheduled for removal - see struct thermal_zone_platform_params. */
>         bool no_hwmon;
>
>         /*
> @@ -274,6 +273,58 @@ struct thermal_zone_params {
>         int offset;
>  };
>
> +/**
> + * struct thermal_governor_params - Thermal Zone governor parameters
> + * @governor_name:     Name of the Thermal Zone governor
> + * @ipa_params:                IPA parameters for Thermal Zone governors
> + */
> +struct thermal_governor_params {
> +       const char *governor_name;
> +       struct thermal_zone_params ipa_params;
> +};
> +
> +/**
> + * struct thermal_zone_platform_params - Thermal Zone parameters
> + * @type:              The thermal zone device type
> + * @ops:               Standard thermal zone device callbacks
> + * @trips:             Pointer to an array of thermal trips, if any
> + * @num_trips:         Number of trip points the thermal zone support
> + * @mask:              Bit string indicating the writeablility of trip points
> + * @passive_delay:     Number of milliseconds to wait between polls when
> + *                     performing passive cooling
> + * @polling_delay:     Number of milliseconds to wait between polls when checking
> + *                     whether trip points have been crossed (0 for interrupt
> + *                     driven systems)
> + * @devdata:           Private device data
> + * @no_hwmon:          Indicates whether the thermal to hwmon sysfs interface is
> + *                     required; this means that when no_hwmon == false, a hwmon
> + *                     sysfs interface will be created and when no_hwmon == true
> + *                     nothing will be done

Could this be the other way around?  So could this field be called
hwmon and could hwmon = true cause the hwmon sysfs i/f to be created?
It would be less confusing this way IMO.

> + */
> +struct thermal_zone_platform_params {
> +       const char *type;
> +       struct thermal_zone_device_ops *ops;
> +       struct thermal_trip *trips;
> +       int num_trips;
> +       int mask;

As I said above, IMO type, trips, num_trips and mask should stay in
the registration function arg list and not be stored in
thermal_zone_platform_params.

> +
> +       int passive_delay;
> +       int polling_delay;
> +
> +       void *devdata;

Same here.  It is just copied directly into tz during registration, so
why store a pointer to it in the params structure?

And same for ops probably.

> +       bool no_hwmon;
> +};
> +
> +/**
> + * struct thermal_zone_device_params - Thermal Zone device parameters
> + * @tzp:               Thermal zone platform parameters
> + * @tgp:               Thermal zone governor parameters
> + */
> +struct thermal_zone_device_params {
> +       struct thermal_zone_platform_params tzp;
> +       struct thermal_governor_params *tgp;
> +};
> +
>  /* Function declarations */
>  #ifdef CONFIG_THERMAL_OF
>  struct thermal_zone_device *devm_thermal_of_zone_register(struct device *dev, int id, void *data,
> @@ -328,6 +379,8 @@ struct thermal_zone_device *thermal_tripless_zone_device_register(
>                                         struct thermal_zone_device_ops *ops,
>                                         const struct thermal_zone_params *tzp);
>
> +struct thermal_zone_device *thermal_zone_device_register(struct thermal_zone_device_params *tzdp);
> +
>  void thermal_zone_device_unregister(struct thermal_zone_device *tz);
>
>  void *thermal_zone_device_priv(struct thermal_zone_device *tzd);
> @@ -390,6 +443,10 @@ static inline struct thermal_zone_device *thermal_tripless_zone_device_register(
>                                         const struct thermal_zone_params *tzp)
>  { return ERR_PTR(-ENODEV); }
>
> +static inline struct thermal_zone_device *thermal_zone_device_register(
> +                                       struct thermal_zone_device_params *tzdp)
> +{ return ERR_PTR(-ENODEV); }
> +
>  static inline void thermal_zone_device_unregister(struct thermal_zone_device *tz)
>  { }
>
> --
Dan Carpenter Feb. 2, 2024, 8:47 a.m. UTC | #3
On Thu, Feb 01, 2024 at 08:24:15PM +0100, Rafael J. Wysocki wrote:
> On Tue, Jan 30, 2024 at 12:13 PM AngeloGioacchino Del Regno
> > diff --git a/include/linux/thermal.h b/include/linux/thermal.h
> > index 65d8f92a9a0d..7a540b746703 100644
> > --- a/include/linux/thermal.h
> > +++ b/include/linux/thermal.h
> > @@ -149,7 +149,8 @@ struct thermal_cooling_device {
> >                         passive trip point.
> >   * @need_update:       if equals 1, thermal_zone_device_update needs to be invoked.
> >   * @ops:       operations this &thermal_zone_device supports
> > - * @tzp:       thermal zone parameters
> > + * @tzp:               Thermal zone parameters
> > + * @tgp:               Thermal zone governor parameters
> >   * @governor:  pointer to the governor for this thermal zone
> >   * @governor_data:     private pointer for governor data
> >   * @thermal_instances: list of &struct thermal_instance of this thermal zone
> > @@ -184,7 +185,8 @@ struct thermal_zone_device {
> >         int prev_high_trip;
> >         atomic_t need_update;
> >         struct thermal_zone_device_ops *ops;
> > -       struct thermal_zone_params *tzp;
> > +       struct thermal_zone_platform_params *tzp;
> > +       struct thermal_governor_params *tgp;
> 
> I agree with doing a split here, but I'm not sure about moving items
> from the arg list to struct thermal_zone_platform_params (as mentioned
> above).
> 
> Also the naming is quite inconsistent.  IMO it would be better to call
> the first pointer "tzpp", rename struct thermal_governor_params to
> struct thermal_zone_governor_params and call the second pointer
> "tzgp".
> 

The names "tzgp" and "tzpp" look almost identical at first glance.
Could we increase the hamming distance somehow?

regards,
dan carpenter
Rafael J. Wysocki Feb. 2, 2024, 5:13 p.m. UTC | #4
On Fri, Feb 2, 2024 at 9:47 AM Dan Carpenter <dan.carpenter@linaro.org> wrote:
>
> On Thu, Feb 01, 2024 at 08:24:15PM +0100, Rafael J. Wysocki wrote:
> > On Tue, Jan 30, 2024 at 12:13 PM AngeloGioacchino Del Regno
> > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h
> > > index 65d8f92a9a0d..7a540b746703 100644
> > > --- a/include/linux/thermal.h
> > > +++ b/include/linux/thermal.h
> > > @@ -149,7 +149,8 @@ struct thermal_cooling_device {
> > >                         passive trip point.
> > >   * @need_update:       if equals 1, thermal_zone_device_update needs to be invoked.
> > >   * @ops:       operations this &thermal_zone_device supports
> > > - * @tzp:       thermal zone parameters
> > > + * @tzp:               Thermal zone parameters
> > > + * @tgp:               Thermal zone governor parameters
> > >   * @governor:  pointer to the governor for this thermal zone
> > >   * @governor_data:     private pointer for governor data
> > >   * @thermal_instances: list of &struct thermal_instance of this thermal zone
> > > @@ -184,7 +185,8 @@ struct thermal_zone_device {
> > >         int prev_high_trip;
> > >         atomic_t need_update;
> > >         struct thermal_zone_device_ops *ops;
> > > -       struct thermal_zone_params *tzp;
> > > +       struct thermal_zone_platform_params *tzp;
> > > +       struct thermal_governor_params *tgp;
> >
> > I agree with doing a split here, but I'm not sure about moving items
> > from the arg list to struct thermal_zone_platform_params (as mentioned
> > above).
> >
> > Also the naming is quite inconsistent.  IMO it would be better to call
> > the first pointer "tzpp", rename struct thermal_governor_params to
> > struct thermal_zone_governor_params and call the second pointer
> > "tzgp".
> >
>
> The names "tzgp" and "tzpp" look almost identical at first glance.
> Could we increase the hamming distance somehow?

Good point.

They may as well be gov_params and platform_params AFAIAC.
AngeloGioacchino Del Regno Feb. 12, 2024, 10:41 a.m. UTC | #5
Il 02/02/24 18:13, Rafael J. Wysocki ha scritto:
> On Fri, Feb 2, 2024 at 9:47 AM Dan Carpenter <dan.carpenter@linaro.org> wrote:
>>
>> On Thu, Feb 01, 2024 at 08:24:15PM +0100, Rafael J. Wysocki wrote:
>>> On Tue, Jan 30, 2024 at 12:13 PM AngeloGioacchino Del Regno
>>>> diff --git a/include/linux/thermal.h b/include/linux/thermal.h
>>>> index 65d8f92a9a0d..7a540b746703 100644
>>>> --- a/include/linux/thermal.h
>>>> +++ b/include/linux/thermal.h
>>>> @@ -149,7 +149,8 @@ struct thermal_cooling_device {
>>>>                          passive trip point.
>>>>    * @need_update:       if equals 1, thermal_zone_device_update needs to be invoked.
>>>>    * @ops:       operations this &thermal_zone_device supports
>>>> - * @tzp:       thermal zone parameters
>>>> + * @tzp:               Thermal zone parameters
>>>> + * @tgp:               Thermal zone governor parameters
>>>>    * @governor:  pointer to the governor for this thermal zone
>>>>    * @governor_data:     private pointer for governor data
>>>>    * @thermal_instances: list of &struct thermal_instance of this thermal zone
>>>> @@ -184,7 +185,8 @@ struct thermal_zone_device {
>>>>          int prev_high_trip;
>>>>          atomic_t need_update;
>>>>          struct thermal_zone_device_ops *ops;
>>>> -       struct thermal_zone_params *tzp;
>>>> +       struct thermal_zone_platform_params *tzp;
>>>> +       struct thermal_governor_params *tgp;
>>>
>>> I agree with doing a split here, but I'm not sure about moving items
>>> from the arg list to struct thermal_zone_platform_params (as mentioned
>>> above).
>>>
>>> Also the naming is quite inconsistent.  IMO it would be better to call
>>> the first pointer "tzpp", rename struct thermal_governor_params to
>>> struct thermal_zone_governor_params and call the second pointer
>>> "tzgp".
>>>
>>
>> The names "tzgp" and "tzpp" look almost identical at first glance.
>> Could we increase the hamming distance somehow?
> 
> Good point.
> 
> They may as well be gov_params and platform_params AFAIAC.

I'm more for gov_params and zone_params, as the thermal_zone_platform_params is
supposed to get renamed to struct thermal_zone_params in part 2.

Anything against that?

Cheers,
Angelo
Rafael J. Wysocki Feb. 12, 2024, 11:57 a.m. UTC | #6
On Mon, Feb 12, 2024 at 11:41 AM AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com> wrote:
>
> Il 02/02/24 18:13, Rafael J. Wysocki ha scritto:
> > On Fri, Feb 2, 2024 at 9:47 AM Dan Carpenter <dan.carpenter@linaro.org> wrote:
> >>
> >> On Thu, Feb 01, 2024 at 08:24:15PM +0100, Rafael J. Wysocki wrote:
> >>> On Tue, Jan 30, 2024 at 12:13 PM AngeloGioacchino Del Regno
> >>>> diff --git a/include/linux/thermal.h b/include/linux/thermal.h
> >>>> index 65d8f92a9a0d..7a540b746703 100644
> >>>> --- a/include/linux/thermal.h
> >>>> +++ b/include/linux/thermal.h
> >>>> @@ -149,7 +149,8 @@ struct thermal_cooling_device {
> >>>>                          passive trip point.
> >>>>    * @need_update:       if equals 1, thermal_zone_device_update needs to be invoked.
> >>>>    * @ops:       operations this &thermal_zone_device supports
> >>>> - * @tzp:       thermal zone parameters
> >>>> + * @tzp:               Thermal zone parameters
> >>>> + * @tgp:               Thermal zone governor parameters
> >>>>    * @governor:  pointer to the governor for this thermal zone
> >>>>    * @governor_data:     private pointer for governor data
> >>>>    * @thermal_instances: list of &struct thermal_instance of this thermal zone
> >>>> @@ -184,7 +185,8 @@ struct thermal_zone_device {
> >>>>          int prev_high_trip;
> >>>>          atomic_t need_update;
> >>>>          struct thermal_zone_device_ops *ops;
> >>>> -       struct thermal_zone_params *tzp;
> >>>> +       struct thermal_zone_platform_params *tzp;
> >>>> +       struct thermal_governor_params *tgp;
> >>>
> >>> I agree with doing a split here, but I'm not sure about moving items
> >>> from the arg list to struct thermal_zone_platform_params (as mentioned
> >>> above).
> >>>
> >>> Also the naming is quite inconsistent.  IMO it would be better to call
> >>> the first pointer "tzpp", rename struct thermal_governor_params to
> >>> struct thermal_zone_governor_params and call the second pointer
> >>> "tzgp".
> >>>
> >>
> >> The names "tzgp" and "tzpp" look almost identical at first glance.
> >> Could we increase the hamming distance somehow?
> >
> > Good point.
> >
> > They may as well be gov_params and platform_params AFAIAC.
>
> I'm more for gov_params and zone_params, as the thermal_zone_platform_params is
> supposed to get renamed to struct thermal_zone_params in part 2.
>
> Anything against that?

Nope, sounds good!
diff mbox series

Patch

diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 81e061f183ad..3efbc60cd148 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -167,14 +167,14 @@  static void estimate_pid_constants(struct thermal_zone_device *tz,
 	if (!temperature_threshold)
 		return;
 
-	tz->tzp->k_po = int_to_frac(sustainable_power) /
+	tz->tgp->ipa_params.k_po = int_to_frac(sustainable_power) /
 		temperature_threshold;
 
-	tz->tzp->k_pu = int_to_frac(2 * sustainable_power) /
+	tz->tgp->ipa_params.k_pu = int_to_frac(2 * sustainable_power) /
 		temperature_threshold;
 
-	k_i = tz->tzp->k_pu / 10;
-	tz->tzp->k_i = k_i > 0 ? k_i : 1;
+	k_i = tz->tgp->ipa_params.k_pu / 10;
+	tz->tgp->ipa_params.k_i = k_i > 0 ? k_i : 1;
 
 	/*
 	 * The default for k_d and integral_cutoff is 0, so we can
@@ -199,10 +199,10 @@  static u32 get_sustainable_power(struct thermal_zone_device *tz,
 {
 	u32 sustainable_power;
 
-	if (!tz->tzp->sustainable_power)
+	if (!tz->tgp->ipa_params.sustainable_power)
 		sustainable_power = estimate_sustainable_power(tz);
 	else
-		sustainable_power = tz->tzp->sustainable_power;
+		sustainable_power = tz->tgp->ipa_params.sustainable_power;
 
 	/* Check if it's init value 0 or there was update via sysfs */
 	if (sustainable_power != params->sustainable_power) {
@@ -210,7 +210,7 @@  static u32 get_sustainable_power(struct thermal_zone_device *tz,
 				       params->trip_switch_on, control_temp);
 
 		/* Do the estimation only once and make available in sysfs */
-		tz->tzp->sustainable_power = sustainable_power;
+		tz->tgp->ipa_params.sustainable_power = sustainable_power;
 		params->sustainable_power = sustainable_power;
 	}
 
@@ -252,7 +252,7 @@  static u32 pid_controller(struct thermal_zone_device *tz,
 	err = int_to_frac(err);
 
 	/* Calculate the proportional term */
-	p = mul_frac(err < 0 ? tz->tzp->k_po : tz->tzp->k_pu, err);
+	p = mul_frac(err < 0 ? tz->tgp->ipa_params.k_po : tz->tgp->ipa_params.k_pu, err);
 
 	/*
 	 * Calculate the integral term
@@ -260,10 +260,10 @@  static u32 pid_controller(struct thermal_zone_device *tz,
 	 * if the error is less than cut off allow integration (but
 	 * the integral is limited to max power)
 	 */
-	i = mul_frac(tz->tzp->k_i, params->err_integral);
+	i = mul_frac(tz->tgp->ipa_params.k_i, params->err_integral);
 
-	if (err < int_to_frac(tz->tzp->integral_cutoff)) {
-		s64 i_next = i + mul_frac(tz->tzp->k_i, err);
+	if (err < int_to_frac(tz->tgp->ipa_params.integral_cutoff)) {
+		s64 i_next = i + mul_frac(tz->tgp->ipa_params.k_i, err);
 
 		if (abs(i_next) < max_power_frac) {
 			i = i_next;
@@ -278,7 +278,7 @@  static u32 pid_controller(struct thermal_zone_device *tz,
 	 * error (i.e. driving closer to the line) results in less
 	 * power being applied, slowing down the controller)
 	 */
-	d = mul_frac(tz->tzp->k_d, err - params->prev_err);
+	d = mul_frac(tz->tgp->ipa_params.k_d, err - params->prev_err);
 	d = div_frac(d, jiffies_to_msecs(tz->passive_delay_jiffies));
 	params->prev_err = err;
 
@@ -699,9 +699,9 @@  static int power_allocator_bind(struct thermal_zone_device *tz)
 		return ret;
 	}
 
-	if (!tz->tzp) {
-		tz->tzp = kzalloc(sizeof(*tz->tzp), GFP_KERNEL);
-		if (!tz->tzp) {
+	if (!tz->tgp) {
+		tz->tgp = kzalloc(sizeof(*tz->tgp), GFP_KERNEL);
+		if (!tz->tgp) {
 			ret = -ENOMEM;
 			goto free_params;
 		}
@@ -709,10 +709,10 @@  static int power_allocator_bind(struct thermal_zone_device *tz)
 		params->allocated_tzp = true;
 	}
 
-	if (!tz->tzp->sustainable_power)
+	if (!tz->tgp->ipa_params.sustainable_power)
 		dev_warn(&tz->device, "power_allocator: sustainable_power will be estimated\n");
 
-	estimate_pid_constants(tz, tz->tzp->sustainable_power,
+	estimate_pid_constants(tz, tz->tgp->ipa_params.sustainable_power,
 			       params->trip_switch_on,
 			       params->trip_max->temperature);
 
@@ -736,8 +736,8 @@  static void power_allocator_unbind(struct thermal_zone_device *tz)
 	dev_dbg(&tz->device, "Unbinding from thermal zone %d\n", tz->id);
 
 	if (params->allocated_tzp) {
-		kfree(tz->tzp);
-		tz->tzp = NULL;
+		kfree(tz->tgp);
+		tz->tgp = NULL;
 	}
 
 	kfree(params->power);
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 6d7c16ccb44d..9eddac93d683 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -252,8 +252,8 @@  int tsens_read_calibration_legacy(struct tsens_priv *priv,
 /*
  * Use this function on devices where slope and offset calculations
  * depend on calibration data read from qfprom. On others the slope
- * and offset values are derived from tz->tzp->slope and tz->tzp->offset
- * resp.
+ * and offset values are derived from tz->tgp->ipa_params.slope and
+ * tz->tgp->ipa_params.offset resp.
  */
 void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
 			     u32 *p2, u32 mode)
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index dfaa6341694a..3150475b947f 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -141,13 +141,13 @@  int thermal_register_governor(struct thermal_governor *governor)
 
 	list_for_each_entry(pos, &thermal_tz_list, node) {
 		/*
-		 * only thermal zones with specified tz->tzp->governor_name
+		 * only thermal zones with specified tz->tgp->governor_name
 		 * may run with tz->govenor unset
 		 */
 		if (pos->governor)
 			continue;
 
-		name = pos->tzp->governor_name;
+		name = pos->tgp->governor_name;
 
 		if (!strncasecmp(name, governor->name, THERMAL_NAME_LENGTH)) {
 			int ret;
@@ -1261,6 +1261,8 @@  EXPORT_SYMBOL_GPL(thermal_zone_get_crit_temp);
  *		   whether trip points have been crossed (0 for interrupt
  *		   driven systems)
  *
+ * This function is deprecated. See thermal_zone_device_register().
+ *
  * This interface function adds a new thermal zone device (sensor) to
  * /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
  * thermal cooling devices registered at the same time.
@@ -1277,19 +1279,80 @@  thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
 					const struct thermal_zone_params *tzp, int passive_delay,
 					int polling_delay)
 {
+	struct thermal_zone_device_params tzdp = {
+		/* Thermal Zone Platform parameters */
+		.tzp = {
+			.type = type,
+			.ops = ops,
+			.trips = trips,
+			.num_trips = num_trips,
+			.mask = mask,
+			.passive_delay = passive_delay,
+			.polling_delay = polling_delay,
+			.devdata = devdata
+		},
+	};
 	struct thermal_zone_device *tz;
+
+	/* Thermal Zone Governor parameters */
+	if (tzp) {
+		tzdp.tgp = kzalloc(sizeof(*tzdp.tgp), GFP_KERNEL);
+		if (!tzdp.tgp)
+			return ERR_PTR(-ENOMEM);
+
+		tzdp.tgp->governor_name = tzp->governor_name;
+		tzdp.tzp.no_hwmon = tzp->no_hwmon;
+		memcpy(&tzdp.tgp->ipa_params, tzp, sizeof(*tzp));
+	}
+
+	tz = thermal_zone_device_register(&tzdp);
+	kfree(tzdp.tgp);
+	return tz;
+}
+EXPORT_SYMBOL_GPL(thermal_zone_device_register_with_trips);
+
+/* This function is deprecated. See thermal_zone_device_register(). */
+struct thermal_zone_device *thermal_tripless_zone_device_register(
+					const char *type,
+					void *devdata,
+					struct thermal_zone_device_ops *ops,
+					const struct thermal_zone_params *tzp)
+{
+	return thermal_zone_device_register_with_trips(type, NULL, 0, 0, devdata,
+						       ops, tzp, 0, 0);
+}
+EXPORT_SYMBOL_GPL(thermal_tripless_zone_device_register);
+
+/**
+ * thermal_zone_device_register() - register a new thermal zone device
+ * @tzdp:	Parameters of the new thermal zone device
+ *		See struct thermal_zone_device_register.
+ *
+ * This interface function adds a new thermal zone device (sensor) to
+ * /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
+ * thermal cooling devices registered at the same time.
+ * thermal_zone_device_unregister() must be called when the device is no
+ * longer needed. The passive cooling depends on the .get_trend() return value.
+ *
+ * Return: a pointer to the created struct thermal_zone_device or an
+ * in case of error, an ERR_PTR. Caller must check return value with
+ * IS_ERR*() helpers.
+ */
+struct thermal_zone_device *thermal_zone_device_register(struct thermal_zone_device_params *tzdp)
+{
+	struct thermal_zone_device *tz;
+	struct thermal_governor *gov;
 	int id;
 	int result;
-	struct thermal_governor *governor;
 
-	if (!type || strlen(type) == 0) {
+	if (!tzdp->tzp.type || strlen(tzdp->tzp.type) == 0) {
 		pr_err("No thermal zone type defined\n");
 		return ERR_PTR(-EINVAL);
 	}
 
-	if (strlen(type) >= THERMAL_NAME_LENGTH) {
+	if (strlen(tzdp->tzp.type) >= THERMAL_NAME_LENGTH) {
 		pr_err("Thermal zone name (%s) too long, should be under %d chars\n",
-		       type, THERMAL_NAME_LENGTH);
+		       tzdp->tzp.type, THERMAL_NAME_LENGTH);
 		return ERR_PTR(-EINVAL);
 	}
 
@@ -1306,17 +1369,19 @@  thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
 	 * Check will be true when the bit 31 of the mask is set.
 	 * 32 bit shift will cause overflow of 4 byte integer.
 	 */
-	if (num_trips > (BITS_PER_TYPE(int) - 1) || num_trips < 0 || mask >> num_trips) {
+	if (tzdp->tzp.num_trips > (BITS_PER_TYPE(int) - 1) ||
+	    tzdp->tzp.num_trips < 0 ||
+	    tzdp->tzp.mask >> tzdp->tzp.num_trips) {
 		pr_err("Incorrect number of thermal trips\n");
 		return ERR_PTR(-EINVAL);
 	}
 
-	if (!ops || !ops->get_temp) {
+	if (!tzdp->tzp.ops || !tzdp->tzp.ops->get_temp) {
 		pr_err("Thermal zone device ops not defined\n");
 		return ERR_PTR(-EINVAL);
 	}
 
-	if (num_trips > 0 && !trips)
+	if (tzdp->tzp.num_trips > 0 && !tzdp->tzp.trips)
 		return ERR_PTR(-EINVAL);
 
 	if (!thermal_class)
@@ -1326,11 +1391,17 @@  thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
 	if (!tz)
 		return ERR_PTR(-ENOMEM);
 
-	if (tzp) {
-		tz->tzp = kmemdup(tzp, sizeof(*tzp), GFP_KERNEL);
-		if (!tz->tzp) {
+	tz->tzp = kmemdup(&tzdp->tzp, sizeof(tzdp->tzp), GFP_KERNEL);
+	if (!tz->tzp) {
+		result = -ENOMEM;
+		goto free_tz;
+	}
+
+	if (tzdp->tgp) {
+		tz->tgp = kmemdup(tzdp->tgp, sizeof(*tzdp->tgp), GFP_KERNEL);
+		if (!tz->tgp) {
 			result = -ENOMEM;
-			goto free_tz;
+			goto free_tzp;
 		}
 	}
 
@@ -1342,27 +1413,27 @@  thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
 	id = ida_alloc(&thermal_tz_ida, GFP_KERNEL);
 	if (id < 0) {
 		result = id;
-		goto free_tzp;
+		goto free_tgp;
 	}
 
 	tz->id = id;
-	strscpy(tz->type, type, sizeof(tz->type));
+	strscpy(tz->type, tzdp->tzp.type, sizeof(tz->type));
 
-	if (!ops->critical)
-		ops->critical = thermal_zone_device_critical;
+	if (!tzdp->tzp.ops->critical)
+		tzdp->tzp.ops->critical = thermal_zone_device_critical;
 
-	tz->ops = ops;
+	tz->ops = tzdp->tzp.ops;
 	tz->device.class = thermal_class;
-	tz->devdata = devdata;
-	tz->trips = trips;
-	tz->num_trips = num_trips;
+	tz->devdata = tzdp->tzp.devdata;
+	tz->trips = tzdp->tzp.trips;
+	tz->num_trips = tzdp->tzp.num_trips;
 
-	thermal_set_delay_jiffies(&tz->passive_delay_jiffies, passive_delay);
-	thermal_set_delay_jiffies(&tz->polling_delay_jiffies, polling_delay);
+	thermal_set_delay_jiffies(&tz->passive_delay_jiffies, tzdp->tzp.passive_delay);
+	thermal_set_delay_jiffies(&tz->polling_delay_jiffies, tzdp->tzp.polling_delay);
 
 	/* sys I/F */
 	/* Add nodes that are always present via .groups */
-	result = thermal_zone_create_device_groups(tz, mask);
+	result = thermal_zone_create_device_groups(tz, tzdp->tzp.mask);
 	if (result)
 		goto remove_id;
 
@@ -1381,12 +1452,12 @@  thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
 	/* Update 'this' zone's governor information */
 	mutex_lock(&thermal_governor_lock);
 
-	if (tz->tzp)
-		governor = __find_governor(tz->tzp->governor_name);
+	if (tzdp->tgp)
+		gov = __find_governor(tzdp->tgp->governor_name);
 	else
-		governor = def_governor;
+		gov = def_governor;
 
-	result = thermal_set_governor(tz, governor);
+	result = thermal_set_governor(tz, gov);
 	if (result) {
 		mutex_unlock(&thermal_governor_lock);
 		goto unregister;
@@ -1394,7 +1465,7 @@  thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
 
 	mutex_unlock(&thermal_governor_lock);
 
-	if (!tz->tzp || !tz->tzp->no_hwmon) {
+	if (!tzdp->tzp.no_hwmon) {
 		result = thermal_add_hwmon_sysfs(tz);
 		if (result)
 			goto unregister;
@@ -1426,24 +1497,15 @@  thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
 	put_device(&tz->device);
 remove_id:
 	ida_free(&thermal_tz_ida, id);
+free_tgp:
+	kfree(tz->tgp);
 free_tzp:
 	kfree(tz->tzp);
 free_tz:
 	kfree(tz);
 	return ERR_PTR(result);
 }
-EXPORT_SYMBOL_GPL(thermal_zone_device_register_with_trips);
-
-struct thermal_zone_device *thermal_tripless_zone_device_register(
-					const char *type,
-					void *devdata,
-					struct thermal_zone_device_ops *ops,
-					const struct thermal_zone_params *tzp)
-{
-	return thermal_zone_device_register_with_trips(type, NULL, 0, 0, devdata,
-						       ops, tzp, 0, 0);
-}
-EXPORT_SYMBOL_GPL(thermal_tripless_zone_device_register);
+EXPORT_SYMBOL_GPL(thermal_zone_device_register);
 
 void *thermal_zone_device_priv(struct thermal_zone_device *tzd)
 {
@@ -1514,7 +1576,7 @@  void thermal_zone_device_unregister(struct thermal_zone_device *tz)
 
 	device_del(&tz->device);
 
-	kfree(tz->tzp);
+	kfree(tz->tgp);
 
 	put_device(&tz->device);
 
diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
index 0329f4a71b02..a72095cfb771 100644
--- a/drivers/thermal/thermal_helpers.c
+++ b/drivers/thermal/thermal_helpers.c
@@ -211,8 +211,8 @@  void thermal_cdev_update(struct thermal_cooling_device *cdev)
  */
 int thermal_zone_get_slope(struct thermal_zone_device *tz)
 {
-	if (tz && tz->tzp)
-		return tz->tzp->slope;
+	if (tz && tz->tgp)
+		return tz->tgp->ipa_params.slope;
 	return 1;
 }
 EXPORT_SYMBOL_GPL(thermal_zone_get_slope);
@@ -226,8 +226,8 @@  EXPORT_SYMBOL_GPL(thermal_zone_get_slope);
  */
 int thermal_zone_get_offset(struct thermal_zone_device *tz)
 {
-	if (tz && tz->tzp)
-		return tz->tzp->offset;
+	if (tz && tz->tgp)
+		return tz->tgp->ipa_params.offset;
 	return 0;
 }
 EXPORT_SYMBOL_GPL(thermal_zone_get_offset);
diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
index f4033865b093..3f5f4a04a754 100644
--- a/drivers/thermal/thermal_sysfs.c
+++ b/drivers/thermal/thermal_sysfs.c
@@ -271,8 +271,8 @@  sustainable_power_show(struct device *dev, struct device_attribute *devattr,
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
 
-	if (tz->tzp)
-		return sprintf(buf, "%u\n", tz->tzp->sustainable_power);
+	if (tz->tgp)
+		return sprintf(buf, "%u\n", tz->tgp->ipa_params.sustainable_power);
 	else
 		return -EIO;
 }
@@ -284,13 +284,13 @@  sustainable_power_store(struct device *dev, struct device_attribute *devattr,
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
 	u32 sustainable_power;
 
-	if (!tz->tzp)
+	if (!tz->tgp)
 		return -EIO;
 
 	if (kstrtou32(buf, 10, &sustainable_power))
 		return -EINVAL;
 
-	tz->tzp->sustainable_power = sustainable_power;
+	tz->tgp->ipa_params.sustainable_power = sustainable_power;
 
 	return count;
 }
@@ -302,8 +302,8 @@  sustainable_power_store(struct device *dev, struct device_attribute *devattr,
 	{								\
 	struct thermal_zone_device *tz = to_thermal_zone(dev);		\
 									\
-	if (tz->tzp)							\
-		return sprintf(buf, "%d\n", tz->tzp->name);		\
+	if (tz->tgp)							\
+		return sprintf(buf, "%d\n", tz->tgp->ipa_params.name);	\
 	else								\
 		return -EIO;						\
 	}								\
@@ -315,13 +315,13 @@  sustainable_power_store(struct device *dev, struct device_attribute *devattr,
 		struct thermal_zone_device *tz = to_thermal_zone(dev);	\
 		s32 value;						\
 									\
-		if (!tz->tzp)						\
+		if (!tz->tgp)						\
 			return -EIO;					\
 									\
 		if (kstrtos32(buf, 10, &value))				\
 			return -EINVAL;					\
 									\
-		tz->tzp->name = value;					\
+		tz->tgp->ipa_params.name = value;			\
 									\
 		return count;						\
 	}								\
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 65d8f92a9a0d..7a540b746703 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -149,7 +149,8 @@  struct thermal_cooling_device {
 			passive trip point.
  * @need_update:	if equals 1, thermal_zone_device_update needs to be invoked.
  * @ops:	operations this &thermal_zone_device supports
- * @tzp:	thermal zone parameters
+ * @tzp:		Thermal zone parameters
+ * @tgp:		Thermal zone governor parameters
  * @governor:	pointer to the governor for this thermal zone
  * @governor_data:	private pointer for governor data
  * @thermal_instances:	list of &struct thermal_instance of this thermal zone
@@ -184,7 +185,8 @@  struct thermal_zone_device {
 	int prev_high_trip;
 	atomic_t need_update;
 	struct thermal_zone_device_ops *ops;
-	struct thermal_zone_params *tzp;
+	struct thermal_zone_platform_params *tzp;
+	struct thermal_governor_params *tgp;
 	struct thermal_governor *governor;
 	void *governor_data;
 	struct list_head thermal_instances;
@@ -224,15 +226,12 @@  struct thermal_governor {
 	struct list_head	governor_list;
 };
 
-/* Structure to define Thermal Zone parameters */
+/* Structure to define Thermal Zone IPA parameters */
 struct thermal_zone_params {
+	/* Scheduled for removal - see struct thermal_governor_params. */
 	const char *governor_name;
 
-	/*
-	 * a boolean to indicate if the thermal to hwmon sysfs interface
-	 * is required. when no_hwmon == false, a hwmon sysfs interface
-	 * will be created. when no_hwmon == true, nothing will be done
-	 */
+	/* Scheduled for removal - see struct thermal_zone_platform_params. */
 	bool no_hwmon;
 
 	/*
@@ -274,6 +273,58 @@  struct thermal_zone_params {
 	int offset;
 };
 
+/**
+ * struct thermal_governor_params - Thermal Zone governor parameters
+ * @governor_name:	Name of the Thermal Zone governor
+ * @ipa_params:		IPA parameters for Thermal Zone governors
+ */
+struct thermal_governor_params {
+	const char *governor_name;
+	struct thermal_zone_params ipa_params;
+};
+
+/**
+ * struct thermal_zone_platform_params - Thermal Zone parameters
+ * @type:		The thermal zone device type
+ * @ops:		Standard thermal zone device callbacks
+ * @trips:		Pointer to an array of thermal trips, if any
+ * @num_trips:		Number of trip points the thermal zone support
+ * @mask:		Bit string indicating the writeablility of trip points
+ * @passive_delay:	Number of milliseconds to wait between polls when
+ *			performing passive cooling
+ * @polling_delay:	Number of milliseconds to wait between polls when checking
+ *			whether trip points have been crossed (0 for interrupt
+ *			driven systems)
+ * @devdata:		Private device data
+ * @no_hwmon:		Indicates whether the thermal to hwmon sysfs interface is
+ *			required; this means that when no_hwmon == false, a hwmon
+ *			sysfs interface will be created and when no_hwmon == true
+ *			nothing will be done
+ */
+struct thermal_zone_platform_params {
+	const char *type;
+	struct thermal_zone_device_ops *ops;
+	struct thermal_trip *trips;
+	int num_trips;
+	int mask;
+
+	int passive_delay;
+	int polling_delay;
+
+	void *devdata;
+	bool no_hwmon;
+};
+
+/**
+ * struct thermal_zone_device_params - Thermal Zone device parameters
+ * @tzp:		Thermal zone platform parameters
+ * @tgp:		Thermal zone governor parameters
+ */
+struct thermal_zone_device_params {
+	struct thermal_zone_platform_params tzp;
+	struct thermal_governor_params *tgp;
+};
+
 /* Function declarations */
 #ifdef CONFIG_THERMAL_OF
 struct thermal_zone_device *devm_thermal_of_zone_register(struct device *dev, int id, void *data,
@@ -328,6 +379,8 @@  struct thermal_zone_device *thermal_tripless_zone_device_register(
 					struct thermal_zone_device_ops *ops,
 					const struct thermal_zone_params *tzp);
 
+struct thermal_zone_device *thermal_zone_device_register(struct thermal_zone_device_params *tzdp);
+
 void thermal_zone_device_unregister(struct thermal_zone_device *tz);
 
 void *thermal_zone_device_priv(struct thermal_zone_device *tzd);
@@ -390,6 +443,10 @@  static inline struct thermal_zone_device *thermal_tripless_zone_device_register(
 					const struct thermal_zone_params *tzp)
 { return ERR_PTR(-ENODEV); }
 
+static inline struct thermal_zone_device *thermal_zone_device_register(
+					struct thermal_zone_device_params *tzdp)
+{ return ERR_PTR(-ENODEV); }
+
 static inline void thermal_zone_device_unregister(struct thermal_zone_device *tz)
 { }