| Message ID | 20240131170523.30048-9-paul.barker.ct@bp.renesas.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | Improve GbEth performance on Renesas RZ/G2L and related SoCs | expand |
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 483993ec25ba..202a3229d436 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -3029,8 +3029,11 @@ static int ravb_probe(struct platform_device *pdev) if (info->nc_queues) netif_napi_add(ndev, &priv->napi[RAVB_NC], info->poll); - if (info->needs_irq_coalesce) + if (info->needs_irq_coalesce) { netdev_sw_irq_coalesce_default_on(ndev); + if (num_present_cpus() == 1) + dev_set_threaded(ndev, true); + } /* Network device register */ error = register_netdev(ndev);
NAPI Threaded mode (along with the previously enabled SW IRQ Coalescing) is required to improve network stack performance for single core SoCs using the GbEth IP (currently the RZ/G2L SoC family and the RZ/G3S SoC). For the RZ/G2UL, network throughput is increased by this change for all test cases except UDP TX (results obtained with iperf3): * TCP TX: 30% more throughput * TCP RX: 9.8% more throughput * UDP TX: 9.7% less throughput * UDP RX: 89% more throughput For the RZ/G3S we see improvements in network throughput similar to the RZ/G2UL. The improvement of UDP RX bandwidth for the single core SoCs (RZ/G2UL & RZ/G3S) is particularly critical. NAPI Threaded mode can be disabled at runtime via sysfs for applications where UDP TX performance is a priority. Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> --- drivers/net/ethernet/renesas/ravb_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)