diff mbox series

[14/17] arm64: dts: renesas: r9a07g044: Update #power-domain-cells = <1>

Message ID 20240208124300.2740313-15-claudiu.beznea.uj@bp.renesas.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series clk: renesas: rzg2l: Add support for power domains | expand

Commit Message

Claudiu Feb. 8, 2024, 12:42 p.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Update CPG #power-domain-cells = <1> and move all the IPs to be part of the
always on power domain as the driver has been modified to support multiple
power domains.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 100 ++++++++++-----------
 1 file changed, 50 insertions(+), 50 deletions(-)

Comments

Geert Uytterhoeven Feb. 16, 2024, 2:11 p.m. UTC | #1 
Hi Claudiu,

On Thu, Feb 8, 2024 at 1:44 PM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Update CPG #power-domain-cells = <1> and move all the IPs to be part of the
> always on power domain as the driver has been modified to support multiple
> power domains.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Thanks for your patch!

> --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
> @@ -238,7 +238,7 @@ mtu3: timer@10001200 {
>                                           "tgia8", "tgib8", "tgic8", "tgid8",
>                                           "tciv8", "tciu8";
>                         clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>;
> -                       power-domains = <&cpg>;
> +                       power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;

This should be R9A07G044_PD_MTU, but that domain is not yet supported
by the driver.  Instead of adding incorrect hardware descriptions,
I'd rather defer this until all domains are handled by the driver.

>                         resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>;
>                         #pwm-cells = <2>;
>                         status = "disabled";

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 66f68fc2b241..c6aa62351b89 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -238,7 +238,7 @@  mtu3: timer@10001200 {
 					  "tgia8", "tgib8", "tgic8", "tgid8",
 					  "tciv8", "tciu8";
 			clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>;
 			#pwm-cells = <2>;
 			status = "disabled";
@@ -259,7 +259,7 @@  ssi0: ssi@10049c00 {
 			resets = <&cpg R9A07G044_SSI0_RST_M2_REG>;
 			dmas = <&dmac 0x2655>, <&dmac 0x2656>;
 			dma-names = "tx", "rx";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			#sound-dai-cells = <0>;
 			status = "disabled";
 		};
@@ -279,7 +279,7 @@  ssi1: ssi@1004a000 {
 			resets = <&cpg R9A07G044_SSI1_RST_M2_REG>;
 			dmas = <&dmac 0x2659>, <&dmac 0x265a>;
 			dma-names = "tx", "rx";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			#sound-dai-cells = <0>;
 			status = "disabled";
 		};
@@ -298,7 +298,7 @@  ssi2: ssi@1004a400 {
 			resets = <&cpg R9A07G044_SSI2_RST_M2_REG>;
 			dmas = <&dmac 0x265f>;
 			dma-names = "rt";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			#sound-dai-cells = <0>;
 			status = "disabled";
 		};
@@ -318,7 +318,7 @@  ssi3: ssi@1004a800 {
 			resets = <&cpg R9A07G044_SSI3_RST_M2_REG>;
 			dmas = <&dmac 0x2661>, <&dmac 0x2662>;
 			dma-names = "tx", "rx";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			#sound-dai-cells = <0>;
 			status = "disabled";
 		};
@@ -334,7 +334,7 @@  spi0: spi@1004ac00 {
 			resets = <&cpg R9A07G044_RSPI0_RST>;
 			dmas = <&dmac 0x2e95>, <&dmac 0x2e96>;
 			dma-names = "tx", "rx";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -352,7 +352,7 @@  spi1: spi@1004b000 {
 			resets = <&cpg R9A07G044_RSPI1_RST>;
 			dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>;
 			dma-names = "tx", "rx";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -370,7 +370,7 @@  spi2: spi@1004b400 {
 			resets = <&cpg R9A07G044_RSPI2_RST>;
 			dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>;
 			dma-names = "tx", "rx";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -390,7 +390,7 @@  scif0: serial@1004b800 {
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G044_SCIF0_CLK_PCK>;
 			clock-names = "fck";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			resets = <&cpg R9A07G044_SCIF0_RST_SYSTEM_N>;
 			status = "disabled";
 		};
@@ -408,7 +408,7 @@  scif1: serial@1004bc00 {
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G044_SCIF1_CLK_PCK>;
 			clock-names = "fck";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			resets = <&cpg R9A07G044_SCIF1_RST_SYSTEM_N>;
 			status = "disabled";
 		};
@@ -426,7 +426,7 @@  scif2: serial@1004c000 {
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G044_SCIF2_CLK_PCK>;
 			clock-names = "fck";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			resets = <&cpg R9A07G044_SCIF2_RST_SYSTEM_N>;
 			status = "disabled";
 		};
@@ -444,7 +444,7 @@  scif3: serial@1004c400 {
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G044_SCIF3_CLK_PCK>;
 			clock-names = "fck";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			resets = <&cpg R9A07G044_SCIF3_RST_SYSTEM_N>;
 			status = "disabled";
 		};
@@ -462,7 +462,7 @@  scif4: serial@1004c800 {
 					  "bri", "dri", "tei";
 			clocks = <&cpg CPG_MOD R9A07G044_SCIF4_CLK_PCK>;
 			clock-names = "fck";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			resets = <&cpg R9A07G044_SCIF4_RST_SYSTEM_N>;
 			status = "disabled";
 		};
@@ -477,7 +477,7 @@  sci0: serial@1004d000 {
 			interrupt-names = "eri", "rxi", "txi", "tei";
 			clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
 			clock-names = "fck";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			resets = <&cpg R9A07G044_SCI0_RST>;
 			status = "disabled";
 		};
@@ -492,7 +492,7 @@  sci1: serial@1004d400 {
 			interrupt-names = "eri", "rxi", "txi", "tei";
 			clocks = <&cpg CPG_MOD R9A07G044_SCI1_CLKP>;
 			clock-names = "fck";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			resets = <&cpg R9A07G044_SCI1_RST>;
 			status = "disabled";
 		};
@@ -520,7 +520,7 @@  canfd: can@10050000 {
 			resets = <&cpg R9A07G044_CANFD_RSTP_N>,
 				 <&cpg R9A07G044_CANFD_RSTC_N>;
 			reset-names = "rstp_n", "rstc_n";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 
 			channel0 {
@@ -549,7 +549,7 @@  i2c0: i2c@10058000 {
 			clocks = <&cpg CPG_MOD R9A07G044_I2C0_PCLK>;
 			clock-frequency = <100000>;
 			resets = <&cpg R9A07G044_I2C0_MRST>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -571,7 +571,7 @@  i2c1: i2c@10058400 {
 			clocks = <&cpg CPG_MOD R9A07G044_I2C1_PCLK>;
 			clock-frequency = <100000>;
 			resets = <&cpg R9A07G044_I2C1_MRST>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -593,7 +593,7 @@  i2c2: i2c@10058800 {
 			clocks = <&cpg CPG_MOD R9A07G044_I2C2_PCLK>;
 			clock-frequency = <100000>;
 			resets = <&cpg R9A07G044_I2C2_MRST>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -615,7 +615,7 @@  i2c3: i2c@10058c00 {
 			clocks = <&cpg CPG_MOD R9A07G044_I2C3_PCLK>;
 			clock-frequency = <100000>;
 			resets = <&cpg R9A07G044_I2C3_MRST>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -629,7 +629,7 @@  adc: adc@10059000 {
 			resets = <&cpg R9A07G044_ADC_PRESETN>,
 				 <&cpg R9A07G044_ADC_ADRST_N>;
 			reset-names = "presetn", "adrst-n";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 
 			#address-cells = <1>;
@@ -667,7 +667,7 @@  tsu: thermal@10059400 {
 			reg = <0 0x10059400 0 0x400>;
 			clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
 			resets = <&cpg R9A07G044_TSU_PRESETN>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -682,7 +682,7 @@  sbc: spi@10060000 {
 			clocks = <&cpg CPG_MOD R9A07G044_SPI_CLK2>,
 				 <&cpg CPG_MOD R9A07G044_SPI_CLK>;
 			resets = <&cpg R9A07G044_SPI_RST>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -702,7 +702,7 @@  cru: video@10830000 {
 			resets = <&cpg R9A07G044_CRU_PRESETN>,
 				 <&cpg R9A07G044_CRU_ARESETN>;
 			reset-names = "presetn", "aresetn";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 
 			ports {
@@ -743,7 +743,7 @@  csi2: csi2@10830400 {
 			resets = <&cpg R9A07G044_CRU_PRESETN>,
 				 <&cpg R9A07G044_CRU_CMN_RSTB>;
 			reset-names = "presetn", "cmn-rstb";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 
 			ports {
@@ -791,7 +791,7 @@  dsi: dsi@10850000 {
 				 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
 				 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
 			reset-names = "rst", "arst", "prst";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -803,7 +803,7 @@  vspd: vsp@10870000 {
 				 <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
 				 <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
 			clock-names = "aclk", "pclk", "vclk";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			resets = <&cpg R9A07G044_LCDC_RESET_N>;
 			renesas,fcp = <&fcpvd>;
 		};
@@ -816,7 +816,7 @@  fcpvd: fcp@10880000 {
 				 <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
 				 <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
 			clock-names = "aclk", "pclk", "vclk";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			resets = <&cpg R9A07G044_LCDC_RESET_N>;
 		};
 
@@ -827,7 +827,7 @@  cpg: clock-controller@11010000 {
 			clock-names = "extal";
 			#clock-cells = <2>;
 			#reset-cells = <1>;
-			#power-domain-cells = <0>;
+			#power-domain-cells = <1>;
 		};
 
 		sysc: system-controller@11020000 {
@@ -852,7 +852,7 @@  pinctrl: pinctrl@11030000 {
 			interrupt-controller;
 			gpio-ranges = <&pinctrl 0 0 392>;
 			clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			resets = <&cpg R9A07G044_GPIO_RSTN>,
 				 <&cpg R9A07G044_GPIO_PORT_RESETN>,
 				 <&cpg R9A07G044_GPIO_SPARE_RESETN>;
@@ -909,7 +909,7 @@  irqc: interrupt-controller@110a0000 {
 			clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
 				 <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
 			clock-names = "clk", "pclk";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			resets = <&cpg R9A07G044_IA55_RESETN>;
 		};
 
@@ -943,7 +943,7 @@  dmac: dma-controller@11820000 {
 			clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>,
 				 <&cpg CPG_MOD R9A07G044_DMAC_PCLK>;
 			clock-names = "main", "register";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			resets = <&cpg R9A07G044_DMAC_ARESETN>,
 				 <&cpg R9A07G044_DMAC_RST_ASYNC>;
 			reset-names = "arst", "rst_async";
@@ -964,7 +964,7 @@  gpu: gpu@11840000 {
 				 <&cpg CPG_MOD R9A07G044_GPU_AXI_CLK>,
 				 <&cpg CPG_MOD R9A07G044_GPU_ACE_CLK>;
 			clock-names = "gpu", "bus", "bus_ace";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			resets = <&cpg R9A07G044_GPU_RESETN>,
 				 <&cpg R9A07G044_GPU_AXI_RESETN>,
 				 <&cpg R9A07G044_GPU_ACE_RESETN>;
@@ -994,7 +994,7 @@  sdhi0: mmc@11c00000 {
 				 <&cpg CPG_MOD R9A07G044_SDHI0_ACLK>;
 			clock-names = "core", "clkh", "cd", "aclk";
 			resets = <&cpg R9A07G044_SDHI0_IXRST>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -1010,7 +1010,7 @@  sdhi1: mmc@11c10000 {
 				 <&cpg CPG_MOD R9A07G044_SDHI1_ACLK>;
 			clock-names = "core", "clkh", "cd", "aclk";
 			resets = <&cpg R9A07G044_SDHI1_IXRST>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -1028,7 +1028,7 @@  eth0: ethernet@11c20000 {
 				 <&cpg CPG_CORE R9A07G044_CLK_HP>;
 			clock-names = "axi", "chi", "refclk";
 			resets = <&cpg R9A07G044_ETH0_RST_HW_N>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -1048,7 +1048,7 @@  eth1: ethernet@11c30000 {
 				 <&cpg CPG_CORE R9A07G044_CLK_HP>;
 			clock-names = "axi", "chi", "refclk";
 			resets = <&cpg R9A07G044_ETH1_RST_HW_N>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -1060,7 +1060,7 @@  phyrst: usbphy-ctrl@11c40000 {
 			reg = <0 0x11c40000 0 0x10000>;
 			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>;
 			resets = <&cpg R9A07G044_USB_PRESETN>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			#reset-cells = <1>;
 			status = "disabled";
 		};
@@ -1075,7 +1075,7 @@  ohci0: usb@11c50000 {
 				 <&cpg R9A07G044_USB_U2H0_HRESETN>;
 			phys = <&usb2_phy0 1>;
 			phy-names = "usb";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -1089,7 +1089,7 @@  ohci1: usb@11c70000 {
 				 <&cpg R9A07G044_USB_U2H1_HRESETN>;
 			phys = <&usb2_phy1 1>;
 			phy-names = "usb";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -1104,7 +1104,7 @@  ehci0: usb@11c50100 {
 			phys = <&usb2_phy0 2>;
 			phy-names = "usb";
 			companion = <&ohci0>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -1119,7 +1119,7 @@  ehci1: usb@11c70100 {
 			phys = <&usb2_phy1 2>;
 			phy-names = "usb";
 			companion = <&ohci1>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -1132,7 +1132,7 @@  usb2_phy0: usb-phy@11c50200 {
 				 <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
 			resets = <&phyrst 0>;
 			#phy-cells = <1>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -1145,7 +1145,7 @@  usb2_phy1: usb-phy@11c70200 {
 				 <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
 			resets = <&phyrst 1>;
 			#phy-cells = <1>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -1164,7 +1164,7 @@  hsusb: usb@11c60000 {
 			renesas,buswait = <7>;
 			phys = <&usb2_phy0 3>;
 			phy-names = "usb";
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -1179,7 +1179,7 @@  wdt0: watchdog@12800800 {
 				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "wdt", "perrout";
 			resets = <&cpg R9A07G044_WDT0_PRESETN>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -1194,7 +1194,7 @@  wdt1: watchdog@12800c00 {
 				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "wdt", "perrout";
 			resets = <&cpg R9A07G044_WDT1_PRESETN>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -1205,7 +1205,7 @@  ostm0: timer@12801000 {
 			interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD R9A07G044_OSTM0_PCLK>;
 			resets = <&cpg R9A07G044_OSTM0_PRESETZ>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -1216,7 +1216,7 @@  ostm1: timer@12801400 {
 			interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD R9A07G044_OSTM1_PCLK>;
 			resets = <&cpg R9A07G044_OSTM1_PRESETZ>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 
@@ -1227,7 +1227,7 @@  ostm2: timer@12801800 {
 			interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&cpg CPG_MOD R9A07G044_OSTM2_PCLK>;
 			resets = <&cpg R9A07G044_OSTM2_PRESETZ>;
-			power-domains = <&cpg>;
+			power-domains = <&cpg R9A07G044_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
 	};