diff mbox series

[RFT,2/3] i2c: mpc: use proper binding for transfer timeouts

Message ID 20240229105810.29220-7-wsa+renesas@sang-engineering.com (mailing list archive)
State Awaiting Upstream
Delegated to: Geert Uytterhoeven
Headers show
Series i2c: mpc: use proper binding for transfer timeouts | expand

Commit Message

Wolfram Sang Feb. 29, 2024, 10:58 a.m. UTC
"i2c-scl-clk-low-timeout-us" is wrongly used here because it describes
maximum clock stretching not maximum transfer time. Additionally, it is
deprecated because of issues. Move this driver to the correct binding.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/busses/i2c-mpc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index e4e4995ab224..0b4de9e569ba 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -844,14 +844,14 @@  static int fsl_i2c_probe(struct platform_device *op)
 			mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock);
 	}
 
-	/*
-	 * "fsl,timeout" has been marked as deprecated and, to maintain
-	 * backward compatibility, we will only look for it if
-	 * "i2c-scl-clk-low-timeout-us" is not present.
-	 */
+	/* Sadly, we have to support two deprecated bindings here */
 	result = of_property_read_u32(op->dev.of_node,
-				      "i2c-scl-clk-low-timeout-us",
+				      "i2c-transfer-timeout-us",
 				      &mpc_ops.timeout);
+	if (result == -EINVAL)
+		result = of_property_read_u32(op->dev.of_node,
+					      "i2c-scl-clk-low-timeout-us",
+					      &mpc_ops.timeout);
 	if (result == -EINVAL)
 		result = of_property_read_u32(op->dev.of_node,
 					      "fsl,timeout", &mpc_ops.timeout);