| Message ID | 20240307140728.190184-6-claudiu.beznea.uj@bp.renesas.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | clk: renesas: rzg2l: Add support for power domains | expand |
On Thu, 07 Mar 2024 16:07:23 +0200, Claudiu wrote: > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > The driver will be modified (in the next commits) to be able to specify > individual power domain ID for each IP. The driver will still > support #power-domain-cells = <0>, thus, previous users are not > affected. > > The #power-domain-cells = <1> has been instantiated only for RZ/G3S at > the moment as individual platform clock drivers need to be adapted for > this to be supported on the rest of the SoCs. > > Also, the description for #power-domain-cells was updated with the links > to per-SoC power domain IDs. > > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > --- > > Changes in v2: > - updated patch title and description > - kept both 0 and 1 for #power-domain-cells as not all the drivers, > device trees are adpated with this series > - added a reference to dt-bindings/clock/r9a0*-cpg.h for power domain > specifiers > - dropped the changes from examples section > > .../bindings/clock/renesas,rzg2l-cpg.yaml | 18 +++++++++++++++++- > 1 file changed, 17 insertions(+), 1 deletion(-) > Reviewed-by: Rob Herring <robh@kernel.org>
On Thu, Mar 7, 2024 at 3:07 PM Claudiu <claudiu.beznea@tuxon.dev> wrote: > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > The driver will be modified (in the next commits) to be able to specify > individual power domain ID for each IP. The driver will still > support #power-domain-cells = <0>, thus, previous users are not > affected. > > The #power-domain-cells = <1> has been instantiated only for RZ/G3S at > the moment as individual platform clock drivers need to be adapted for > this to be supported on the rest of the SoCs. > > Also, the description for #power-domain-cells was updated with the links > to per-SoC power domain IDs. > > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > --- > > Changes in v2: > - updated patch title and description > - kept both 0 and 1 for #power-domain-cells as not all the drivers, > device trees are adpated with this series > - added a reference to dt-bindings/clock/r9a0*-cpg.h for power domain > specifiers > - dropped the changes from examples section Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml index 80a8c7114c31..4e3b0c45124a 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml @@ -57,7 +57,8 @@ properties: can be power-managed through Module Standby should refer to the CPG device node in their "power-domains" property, as documented by the generic PM Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml. - const: 0 + The power domain specifiers defined in <dt-bindings/clock/r9a0*-cpg.h> could + be used to reference individual CPG power domains. '#reset-cells': description: @@ -76,6 +77,21 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + const: renesas,r9a08g045-cpg + then: + properties: + '#power-domain-cells': + const: 1 + else: + properties: + '#power-domain-cells': + const: 0 + examples: - | cpg: clock-controller@11010000 {