diff mbox series

[net-next,v6,3/7] net: stmmac: don't rely on lynx_pcs presence to check for a PHY

Message ID 20240311-rxc_bugfix-v6-3-adf5133829a2@bootlin.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series Fix missing PHY-to-MAC RX clock | expand

Commit Message

Romain Gantois March 11, 2024, 9:55 a.m. UTC 
From: Maxime Chevallier <maxime.chevallier@bootlin.com>

When initializing attached PHYs, there are some cases where we don't expect
any PHY to be connected. The logic uses conditions based on various local
PCS configuration, but also calls-in phylink_expects_phy() via
stmmac_init_phy(), which is enough to ensure we don't try to initialize a
PHY when using a Lynx PCS, as long as we have the phy_interface set to a
802.3z mode and are using inband negociation.

Drop the lynx check, making the stmmac generic code more pcs_lynx-agnostic.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[rgantois: commit log]
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 24cd80490d19..d78c625d33eb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3960,8 +3960,7 @@  static int __stmmac_open(struct net_device *dev,
 	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI &&
 	    (!priv->hw->xpcs ||
-	     xpcs_get_an_mode(priv->hw->xpcs, mode) != DW_AN_C73) &&
-	    !priv->hw->lynx_pcs) {
+	     xpcs_get_an_mode(priv->hw->xpcs, mode) != DW_AN_C73)) {
 		ret = stmmac_init_phy(dev);
 		if (ret) {
 			netdev_err(priv->dev,