diff mbox series

[v3,5/7] usb: renesas_usbhs: Update usbhs pipe configuration for RZ/G2L family

Message ID 20240315183921.375751-6-biju.das.jz@bp.renesas.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series Fix USB pipe configuration for RZ/G2L | expand

Commit Message

Biju Das March 15, 2024, 6:39 p.m. UTC
The RZ/G2L family SoCs has 10 PIPE buffers compared to 16 pipe buffers on
RZ/A2M. Update the pipe configuration for RZ/G2L family SoCs and use
family SoC specific compatible to handle this difference.

Added SoC specific compatible to OF table to avoid ABI breakage with old
DTB. To optimize memory usage the SoC specific compatible will be removed
later.

The pipe configuration of RZ/G2L is same as the default one, so reuse the
common table by renaming usbhs_default_pipe[]->usbhs_rcar_default_pipe[]
and changing static qualifier to global to fill the pipe configuration
data.

Signed-off-by: Huy Nguyen <huy.nguyen.wh@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v2->v3:
 * Updated commit description
 * Dropped usbhsc_rzg2l_pipe[] and reusing the default_pipe[].
v1->v2:
 * Dropped using of_device_is_compatible() in probe.
 * Added usbhs_rzg2l_plat_info and replaced the device data for RZ/G2L
   from usbhs_rza2_plat_info->usbhs_rzg2l_plat_info.
 * Moved usbhsc_rzg2l_pipe table near to the user.
 * Updated commit description.
---
 drivers/usb/renesas_usbhs/common.c | 24 ++++++++++++++++++++----
 drivers/usb/renesas_usbhs/common.h |  1 +
 drivers/usb/renesas_usbhs/rza.h    |  1 +
 drivers/usb/renesas_usbhs/rza2.c   | 15 +++++++++++++++
 4 files changed, 37 insertions(+), 4 deletions(-)

Comments

Geert Uytterhoeven March 18, 2024, 9:25 a.m. UTC | #1
Hi Biju,

On Fri, Mar 15, 2024 at 7:39 PM Biju Das <biju.das.jz@bp.renesas.com> wrote:
> The RZ/G2L family SoCs has 10 PIPE buffers compared to 16 pipe buffers on
> RZ/A2M. Update the pipe configuration for RZ/G2L family SoCs and use
> family SoC specific compatible to handle this difference.
>
> Added SoC specific compatible to OF table to avoid ABI breakage with old
> DTB. To optimize memory usage the SoC specific compatible will be removed
> later.
>
> The pipe configuration of RZ/G2L is same as the default one, so reuse the
> common table by renaming usbhs_default_pipe[]->usbhs_rcar_default_pipe[]
> and changing static qualifier to global to fill the pipe configuration
> data.
>
> Signed-off-by: Huy Nguyen <huy.nguyen.wh@renesas.com>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> v2->v3:
>  * Updated commit description
>  * Dropped usbhsc_rzg2l_pipe[] and reusing the default_pipe[].

Thanks for the update!

> --- a/drivers/usb/renesas_usbhs/common.c
> +++ b/drivers/usb/renesas_usbhs/common.c
> @@ -363,8 +363,8 @@ static void usbhsc_clk_disable_unprepare(struct usbhs_priv *priv)
>   *             platform default param
>   */
>
> -/* commonly used on old SH-Mobile SoCs */
> -static struct renesas_usbhs_driver_pipe_config usbhsc_default_pipe[] = {
> +/* commonly used on old SH-Mobile and RZ/G2L family SoCs */
> +struct renesas_usbhs_driver_pipe_config usbhsc_rcar_default_pipe[] = {

So why rename this to have "rcar" in the name?

Gr{oetje,eeting}s,

                        Geert
Biju Das March 18, 2024, 9:46 a.m. UTC | #2
Hi Geert,

Thanks for the feedback.

> -----Original Message-----
> From: Geert Uytterhoeven <geert@linux-m68k.org>
> Sent: Monday, March 18, 2024 9:25 AM
> Subject: Re: [PATCH v3 5/7] usb: renesas_usbhs: Update usbhs pipe configuration for RZ/G2L family
> 
> Hi Biju,
> 
> On Fri, Mar 15, 2024 at 7:39 PM Biju Das <biju.das.jz@bp.renesas.com> wrote:
> > The RZ/G2L family SoCs has 10 PIPE buffers compared to 16 pipe buffers
> > on RZ/A2M. Update the pipe configuration for RZ/G2L family SoCs and
> > use family SoC specific compatible to handle this difference.
> >
> > Added SoC specific compatible to OF table to avoid ABI breakage with
> > old DTB. To optimize memory usage the SoC specific compatible will be
> > removed later.
> >
> > The pipe configuration of RZ/G2L is same as the default one, so reuse
> > the common table by renaming
> > usbhs_default_pipe[]->usbhs_rcar_default_pipe[]
> > and changing static qualifier to global to fill the pipe configuration
> > data.
> >
> > Signed-off-by: Huy Nguyen <huy.nguyen.wh@renesas.com>
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > ---
> > v2->v3:
> >  * Updated commit description
> >  * Dropped usbhsc_rzg2l_pipe[] and reusing the default_pipe[].
> 
> Thanks for the update!
> 
> > --- a/drivers/usb/renesas_usbhs/common.c
> > +++ b/drivers/usb/renesas_usbhs/common.c
> > @@ -363,8 +363,8 @@ static void usbhsc_clk_disable_unprepare(struct usbhs_priv *priv)
> >   *             platform default param
> >   */
> >
> > -/* commonly used on old SH-Mobile SoCs */ -static struct
> > renesas_usbhs_driver_pipe_config usbhsc_default_pipe[] = {
> > +/* commonly used on old SH-Mobile and RZ/G2L family SoCs */ struct
> > +renesas_usbhs_driver_pipe_config usbhsc_rcar_default_pipe[] = {
> 
> So why rename this to have "rcar" in the name?

Oops, it is not used by R-Car, but used by old SH SoCs and RZ/G2L
As this structure becomes global now, Will use usbhsc_rzg2l_default_pipe[] instead??

Or

Will make this as static like current driver and drop filling pipe configs in info and
use .has_new_pipe_configs to zero for devices using usbhsc_default_pipe[]??

Cheers,
Biju
Geert Uytterhoeven March 18, 2024, 9:51 a.m. UTC | #3
Hi Biju,

On Mon, Mar 18, 2024 at 10:46 AM Biju Das <biju.das.jz@bp.renesas.com> wrote:
> > From: Geert Uytterhoeven <geert@linux-m68k.org>
> > On Fri, Mar 15, 2024 at 7:39 PM Biju Das <biju.das.jz@bp.renesas.com> wrote:
> > > The RZ/G2L family SoCs has 10 PIPE buffers compared to 16 pipe buffers
> > > on RZ/A2M. Update the pipe configuration for RZ/G2L family SoCs and
> > > use family SoC specific compatible to handle this difference.
> > >
> > > Added SoC specific compatible to OF table to avoid ABI breakage with
> > > old DTB. To optimize memory usage the SoC specific compatible will be
> > > removed later.
> > >
> > > The pipe configuration of RZ/G2L is same as the default one, so reuse
> > > the common table by renaming
> > > usbhs_default_pipe[]->usbhs_rcar_default_pipe[]
> > > and changing static qualifier to global to fill the pipe configuration
> > > data.
> > >
> > > Signed-off-by: Huy Nguyen <huy.nguyen.wh@renesas.com>
> > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > > ---
> > > v2->v3:
> > >  * Updated commit description
> > >  * Dropped usbhsc_rzg2l_pipe[] and reusing the default_pipe[].
> >
> > Thanks for the update!
> >
> > > --- a/drivers/usb/renesas_usbhs/common.c
> > > +++ b/drivers/usb/renesas_usbhs/common.c
> > > @@ -363,8 +363,8 @@ static void usbhsc_clk_disable_unprepare(struct usbhs_priv *priv)
> > >   *             platform default param
> > >   */
> > >
> > > -/* commonly used on old SH-Mobile SoCs */ -static struct
> > > renesas_usbhs_driver_pipe_config usbhsc_default_pipe[] = {
> > > +/* commonly used on old SH-Mobile and RZ/G2L family SoCs */ struct
> > > +renesas_usbhs_driver_pipe_config usbhsc_rcar_default_pipe[] = {
> >
> > So why rename this to have "rcar" in the name?
>
> Oops, it is not used by R-Car, but used by old SH SoCs and RZ/G2L
> As this structure becomes global now, Will use usbhsc_rzg2l_default_pipe[] instead??
>
> Or
>
> Will make this as static like current driver and drop filling pipe configs in info and
> use .has_new_pipe_configs to zero for devices using usbhsc_default_pipe[]??

I think just using .has_new_pipe_configs is the simplest solution.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index 013bc1583610..3c67cd9c4406 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -363,8 +363,8 @@  static void usbhsc_clk_disable_unprepare(struct usbhs_priv *priv)
  *		platform default param
  */
 
-/* commonly used on old SH-Mobile SoCs */
-static struct renesas_usbhs_driver_pipe_config usbhsc_default_pipe[] = {
+/* commonly used on old SH-Mobile and RZ/G2L family SoCs */
+struct renesas_usbhs_driver_pipe_config usbhsc_rcar_default_pipe[] = {
 	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
 	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, true),
 	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x28, true),
@@ -565,6 +565,18 @@  static const struct of_device_id usbhs_of_match[] = {
 		.compatible = "renesas,usbhs-r8a77995",
 		.data = &usbhs_rcar_gen3_with_pll_plat_info,
 	},
+	{
+		.compatible = "renesas,usbhs-r9a07g043",
+		.data = &usbhs_rzg2l_plat_info,
+	},
+	{
+		.compatible = "renesas,usbhs-r9a07g044",
+		.data = &usbhs_rzg2l_plat_info,
+	},
+	{
+		.compatible = "renesas,usbhs-r9a07g054",
+		.data = &usbhs_rzg2l_plat_info,
+	},
 	{
 		.compatible = "renesas,rcar-gen2-usbhs",
 		.data = &usbhs_rcar_gen2_plat_info,
@@ -581,6 +593,10 @@  static const struct of_device_id usbhs_of_match[] = {
 		.compatible = "renesas,rza2-usbhs",
 		.data = &usbhs_rza2_plat_info,
 	},
+	{
+		.compatible = "renesas,rzg2l-usbhs",
+		.data = &usbhs_rzg2l_plat_info,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, usbhs_of_match);
@@ -642,8 +658,8 @@  static int usbhs_probe(struct platform_device *pdev)
 	priv->dparam.pipe_configs = info->driver_param.pipe_configs;
 	priv->dparam.pipe_size = info->driver_param.pipe_size;
 	if (!priv->dparam.pipe_configs) {
-		priv->dparam.pipe_configs = usbhsc_default_pipe;
-		priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe);
+		priv->dparam.pipe_configs = usbhsc_rcar_default_pipe;
+		priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_rcar_default_pipe);
 	}
 	if (!priv->dparam.pio_dma_border)
 		priv->dparam.pio_dma_border = 64; /* 64byte */
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index f6f527ca9b45..6b4b6f43d823 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -343,6 +343,7 @@  struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev);
 #define usbhs_priv_to_dev(priv)		(&priv->pdev->dev)
 #define usbhs_priv_to_lock(priv)	(&priv->lock)
 
+extern struct renesas_usbhs_driver_pipe_config usbhsc_rcar_default_pipe[];
 extern struct renesas_usbhs_driver_pipe_config usbhsc_rcar_pipe[];
 
 #endif /* RENESAS_USB_DRIVER_H */
diff --git a/drivers/usb/renesas_usbhs/rza.h b/drivers/usb/renesas_usbhs/rza.h
index a29b75fef057..8b879aa34a20 100644
--- a/drivers/usb/renesas_usbhs/rza.h
+++ b/drivers/usb/renesas_usbhs/rza.h
@@ -3,3 +3,4 @@ 
 
 extern const struct renesas_usbhs_platform_info usbhs_rza1_plat_info;
 extern const struct renesas_usbhs_platform_info usbhs_rza2_plat_info;
+extern const struct renesas_usbhs_platform_info usbhs_rzg2l_plat_info;
diff --git a/drivers/usb/renesas_usbhs/rza2.c b/drivers/usb/renesas_usbhs/rza2.c
index f6660628eea9..de96c226c826 100644
--- a/drivers/usb/renesas_usbhs/rza2.c
+++ b/drivers/usb/renesas_usbhs/rza2.c
@@ -72,3 +72,18 @@  const struct renesas_usbhs_platform_info usbhs_rza2_plat_info = {
 		.cfifo_byte_addr = 1,
 	},
 };
+
+const struct renesas_usbhs_platform_info usbhs_rzg2l_plat_info = {
+	.platform_callback = {
+		.hardware_init = usbhs_rza2_hardware_init,
+		.hardware_exit = usbhs_rza2_hardware_exit,
+		.power_ctrl = usbhs_rza2_power_ctrl,
+		.get_id = usbhs_get_id_as_gadget,
+	},
+	.driver_param = {
+		.pipe_configs = usbhsc_rcar_default_pipe,
+		.pipe_size = 10,
+		.has_cnen = 1,
+		.cfifo_byte_addr = 1,
+	},
+};