Message ID | 20240503155127.105235-9-jacopo.mondi@ideasonboard.com (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Kieran Bingham |
Headers | show |
Series | media: renesas: rcar-csi2: Use the subdev active state | expand |
Hi Jacopo, Thank you for the patch. On Fri, May 03, 2024 at 05:51:23PM +0200, Jacopo Mondi wrote: > Initialize and use the subdev active state to store the subdevice > format. > > This simplifies the implementation of the get_fmt and set_fmt pad > operations. > > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > --- > drivers/media/i2c/adv748x/adv748x-csi2.c | 114 ++++++++--------------- > drivers/media/i2c/adv748x/adv748x.h | 1 - > 2 files changed, 41 insertions(+), 74 deletions(-) > > diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c > index 1aae6467ca62..15a77387b32e 100644 > --- a/drivers/media/i2c/adv748x/adv748x-csi2.c > +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c > @@ -6,7 +6,6 @@ > */ > > #include <linux/module.h> > -#include <linux/mutex.h> > > #include <media/v4l2-ctrls.h> > #include <media/v4l2-device.h> > @@ -14,13 +13,6 @@ > > #include "adv748x.h" > > -static const struct v4l2_mbus_framefmt adv748x_csi2_default_fmt = { > - .width = 1280, > - .height = 720, > - .code = MEDIA_BUS_FMT_YUYV8_1X16, > - .field = V4L2_FIELD_NONE, > -}; > - > static const unsigned int adv748x_csi2_txa_fmts[] = { > MEDIA_BUS_FMT_YUYV8_1X16, > MEDIA_BUS_FMT_YUYV10_1X20, > @@ -78,7 +70,32 @@ static int adv748x_csi2_register_link(struct adv748x_csi2 *tx, > > /* ----------------------------------------------------------------------------- > * v4l2_subdev_internal_ops > - * > + */ > + > +static int adv748x_csi2_init_state(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *state) > +{ > + static const struct v4l2_mbus_framefmt adv748x_csi2_default_fmt = { > + .width = 1280, > + .height = 720, > + .code = MEDIA_BUS_FMT_YUYV8_1X16, I think this should be UYVY8. > + .colorspace = V4L2_COLORSPACE_SRGB, > + .field = V4L2_FIELD_NONE, > + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT, > + .quantization = V4L2_QUANTIZATION_DEFAULT, > + .xfer_func = V4L2_XFER_FUNC_DEFAULT, > + }; > + struct v4l2_mbus_framefmt *fmt; > + > + fmt = v4l2_subdev_state_get_format(state, ADV748X_CSI2_SINK); > + *fmt = adv748x_csi2_default_fmt; > + > + *v4l2_subdev_state_get_format(state, ADV748X_CSI2_SOURCE) = *fmt; For consistency, I'd write fmt = v4l2_subdev_state_get_format(state, ADV748X_CSI2_SOURCE); *fmt = adv748x_csi2_default_fmt; > + > + return 0; > +} > + > +/* > * We use the internal registered operation to be able to ensure that our > * incremental subdevices (not connected in the forward path) can be registered > * against the resulting video path and media device. > @@ -128,6 +145,7 @@ static int adv748x_csi2_registered(struct v4l2_subdev *sd) > } > > static const struct v4l2_subdev_internal_ops adv748x_csi2_internal_ops = { > + .init_state = adv748x_csi2_init_state, > .registered = adv748x_csi2_registered, > }; > > @@ -180,41 +198,6 @@ static int adv748x_csi2_enum_mbus_code(struct v4l2_subdev *sd, > return 0; > } > > -static struct v4l2_mbus_framefmt * > -adv748x_csi2_get_pad_format(struct v4l2_subdev *sd, > - struct v4l2_subdev_state *sd_state, > - unsigned int pad, u32 which) > -{ > - struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); > - > - if (which == V4L2_SUBDEV_FORMAT_TRY) > - return v4l2_subdev_state_get_format(sd_state, pad); > - > - return &tx->format; > -} > - > -static int adv748x_csi2_get_format(struct v4l2_subdev *sd, > - struct v4l2_subdev_state *sd_state, > - struct v4l2_subdev_format *sdformat) > -{ > - struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); > - struct adv748x_state *state = tx->state; > - struct v4l2_mbus_framefmt *mbusformat; > - > - mbusformat = adv748x_csi2_get_pad_format(sd, sd_state, sdformat->pad, > - sdformat->which); > - if (!mbusformat) > - return -EINVAL; > - > - mutex_lock(&state->mutex); > - > - sdformat->format = *mbusformat; > - > - mutex_unlock(&state->mutex); > - > - return 0; > -} > - > static int adv748x_csi2_is_fmt_supported(struct adv748x_csi2 *tx, > unsigned int code) > { > @@ -237,10 +220,12 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd, > struct v4l2_subdev_format *sdformat) > { > struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); > - struct adv748x_state *state = tx->state; > struct v4l2_mbus_framefmt *mbusformat; > int ret; > > + if (sdformat->pad == ADV748X_CSI2_SOURCE) > + return v4l2_subdev_get_fmt(sd, sd_state, sdformat); > + > /* > * Make sure the format is supported, if not default it to > * YUYV8 as it's supported by both TXes. > @@ -249,34 +234,14 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd, > if (ret) > sdformat->format.code = MEDIA_BUS_FMT_YUYV8_1X16; > > - mbusformat = adv748x_csi2_get_pad_format(sd, sd_state, sdformat->pad, > - sdformat->which); > - if (!mbusformat) > - return -EINVAL; > - > - mutex_lock(&state->mutex); The function was locking the device-wide mutex, now it's only locking the state of this particular subdev. Have you checked this doesn't introduce any race condition ? If so, please indicate it in the commit message. If so, please check it :-) > - > - if (sdformat->pad == ADV748X_CSI2_SOURCE) { > - const struct v4l2_mbus_framefmt *sink_fmt; > - > - sink_fmt = adv748x_csi2_get_pad_format(sd, sd_state, > - ADV748X_CSI2_SINK, > - sdformat->which); > - > - if (!sink_fmt) { > - ret = -EINVAL; > - goto unlock; > - } > - > - sdformat->format = *sink_fmt; > - } > - > + mbusformat = v4l2_subdev_state_get_format(sd_state, sdformat->pad); > *mbusformat = sdformat->format; > > -unlock: > - mutex_unlock(&state->mutex); > + /* Propagate format to the source pad. */ > + mbusformat = v4l2_subdev_state_get_format(sd_state, ADV748X_CSI2_SOURCE); > + *mbusformat = sdformat->format; > > - return ret; > + return 0; > } > > static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad, > @@ -295,7 +260,7 @@ static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad > > static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = { > .enum_mbus_code = adv748x_csi2_enum_mbus_code, > - .get_fmt = adv748x_csi2_get_format, > + .get_fmt = v4l2_subdev_get_fmt, > .set_fmt = adv748x_csi2_set_format, > .get_mbus_config = adv748x_csi2_get_mbus_config, > }; > @@ -378,8 +343,6 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx) > if (ret) > return ret; > > - tx->format = adv748x_csi2_default_fmt; > - > ret = v4l2_async_subdev_endpoint_add(&tx->sd, > of_fwnode_handle(state->endpoints[tx->port])); > if (ret) > @@ -389,6 +352,11 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx) > if (ret) > goto err_cleanup_subdev; > > + tx->sd.state_lock = &state->mutex; Ah, that answers my question above. Can you also convert the AFE and HDMI subdevs to use the active state ? > + ret = v4l2_subdev_init_finalize(&tx->sd); > + if (ret) > + goto err_free_ctrl; > + > ret = v4l2_async_register_subdev(&tx->sd); > if (ret) > goto err_free_ctrl; > diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h > index d2b5e722e997..9bc0121d0eff 100644 > --- a/drivers/media/i2c/adv748x/adv748x.h > +++ b/drivers/media/i2c/adv748x/adv748x.h > @@ -75,7 +75,6 @@ enum adv748x_csi2_pads { > > struct adv748x_csi2 { > struct adv748x_state *state; > - struct v4l2_mbus_framefmt format; > unsigned int page; > unsigned int port; > unsigned int num_lanes;
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c index 1aae6467ca62..15a77387b32e 100644 --- a/drivers/media/i2c/adv748x/adv748x-csi2.c +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c @@ -6,7 +6,6 @@ */ #include <linux/module.h> -#include <linux/mutex.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> @@ -14,13 +13,6 @@ #include "adv748x.h" -static const struct v4l2_mbus_framefmt adv748x_csi2_default_fmt = { - .width = 1280, - .height = 720, - .code = MEDIA_BUS_FMT_YUYV8_1X16, - .field = V4L2_FIELD_NONE, -}; - static const unsigned int adv748x_csi2_txa_fmts[] = { MEDIA_BUS_FMT_YUYV8_1X16, MEDIA_BUS_FMT_YUYV10_1X20, @@ -78,7 +70,32 @@ static int adv748x_csi2_register_link(struct adv748x_csi2 *tx, /* ----------------------------------------------------------------------------- * v4l2_subdev_internal_ops - * + */ + +static int adv748x_csi2_init_state(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + static const struct v4l2_mbus_framefmt adv748x_csi2_default_fmt = { + .width = 1280, + .height = 720, + .code = MEDIA_BUS_FMT_YUYV8_1X16, + .colorspace = V4L2_COLORSPACE_SRGB, + .field = V4L2_FIELD_NONE, + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT, + .quantization = V4L2_QUANTIZATION_DEFAULT, + .xfer_func = V4L2_XFER_FUNC_DEFAULT, + }; + struct v4l2_mbus_framefmt *fmt; + + fmt = v4l2_subdev_state_get_format(state, ADV748X_CSI2_SINK); + *fmt = adv748x_csi2_default_fmt; + + *v4l2_subdev_state_get_format(state, ADV748X_CSI2_SOURCE) = *fmt; + + return 0; +} + +/* * We use the internal registered operation to be able to ensure that our * incremental subdevices (not connected in the forward path) can be registered * against the resulting video path and media device. @@ -128,6 +145,7 @@ static int adv748x_csi2_registered(struct v4l2_subdev *sd) } static const struct v4l2_subdev_internal_ops adv748x_csi2_internal_ops = { + .init_state = adv748x_csi2_init_state, .registered = adv748x_csi2_registered, }; @@ -180,41 +198,6 @@ static int adv748x_csi2_enum_mbus_code(struct v4l2_subdev *sd, return 0; } -static struct v4l2_mbus_framefmt * -adv748x_csi2_get_pad_format(struct v4l2_subdev *sd, - struct v4l2_subdev_state *sd_state, - unsigned int pad, u32 which) -{ - struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); - - if (which == V4L2_SUBDEV_FORMAT_TRY) - return v4l2_subdev_state_get_format(sd_state, pad); - - return &tx->format; -} - -static int adv748x_csi2_get_format(struct v4l2_subdev *sd, - struct v4l2_subdev_state *sd_state, - struct v4l2_subdev_format *sdformat) -{ - struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); - struct adv748x_state *state = tx->state; - struct v4l2_mbus_framefmt *mbusformat; - - mbusformat = adv748x_csi2_get_pad_format(sd, sd_state, sdformat->pad, - sdformat->which); - if (!mbusformat) - return -EINVAL; - - mutex_lock(&state->mutex); - - sdformat->format = *mbusformat; - - mutex_unlock(&state->mutex); - - return 0; -} - static int adv748x_csi2_is_fmt_supported(struct adv748x_csi2 *tx, unsigned int code) { @@ -237,10 +220,12 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_format *sdformat) { struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); - struct adv748x_state *state = tx->state; struct v4l2_mbus_framefmt *mbusformat; int ret; + if (sdformat->pad == ADV748X_CSI2_SOURCE) + return v4l2_subdev_get_fmt(sd, sd_state, sdformat); + /* * Make sure the format is supported, if not default it to * YUYV8 as it's supported by both TXes. @@ -249,34 +234,14 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd, if (ret) sdformat->format.code = MEDIA_BUS_FMT_YUYV8_1X16; - mbusformat = adv748x_csi2_get_pad_format(sd, sd_state, sdformat->pad, - sdformat->which); - if (!mbusformat) - return -EINVAL; - - mutex_lock(&state->mutex); - - if (sdformat->pad == ADV748X_CSI2_SOURCE) { - const struct v4l2_mbus_framefmt *sink_fmt; - - sink_fmt = adv748x_csi2_get_pad_format(sd, sd_state, - ADV748X_CSI2_SINK, - sdformat->which); - - if (!sink_fmt) { - ret = -EINVAL; - goto unlock; - } - - sdformat->format = *sink_fmt; - } - + mbusformat = v4l2_subdev_state_get_format(sd_state, sdformat->pad); *mbusformat = sdformat->format; -unlock: - mutex_unlock(&state->mutex); + /* Propagate format to the source pad. */ + mbusformat = v4l2_subdev_state_get_format(sd_state, ADV748X_CSI2_SOURCE); + *mbusformat = sdformat->format; - return ret; + return 0; } static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad, @@ -295,7 +260,7 @@ static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = { .enum_mbus_code = adv748x_csi2_enum_mbus_code, - .get_fmt = adv748x_csi2_get_format, + .get_fmt = v4l2_subdev_get_fmt, .set_fmt = adv748x_csi2_set_format, .get_mbus_config = adv748x_csi2_get_mbus_config, }; @@ -378,8 +343,6 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx) if (ret) return ret; - tx->format = adv748x_csi2_default_fmt; - ret = v4l2_async_subdev_endpoint_add(&tx->sd, of_fwnode_handle(state->endpoints[tx->port])); if (ret) @@ -389,6 +352,11 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx) if (ret) goto err_cleanup_subdev; + tx->sd.state_lock = &state->mutex; + ret = v4l2_subdev_init_finalize(&tx->sd); + if (ret) + goto err_free_ctrl; + ret = v4l2_async_register_subdev(&tx->sd); if (ret) goto err_free_ctrl; diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h index d2b5e722e997..9bc0121d0eff 100644 --- a/drivers/media/i2c/adv748x/adv748x.h +++ b/drivers/media/i2c/adv748x/adv748x.h @@ -75,7 +75,6 @@ enum adv748x_csi2_pads { struct adv748x_csi2 { struct adv748x_state *state; - struct v4l2_mbus_framefmt format; unsigned int page; unsigned int port; unsigned int num_lanes;
Initialize and use the subdev active state to store the subdevice format. This simplifies the implementation of the get_fmt and set_fmt pad operations. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> --- drivers/media/i2c/adv748x/adv748x-csi2.c | 114 ++++++++--------------- drivers/media/i2c/adv748x/adv748x.h | 1 - 2 files changed, 41 insertions(+), 74 deletions(-)