| Message ID | 20240509161403.111789-6-jacopo.mondi@ideasonboard.com (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | Kieran Bingham |
| Headers | show |
| Series | media: renesas: rcar-csi2: Use the subdev active state | expand |
Hi Jacopo, Thank you for the patch. On Thu, May 09, 2024 at 06:13:55PM +0200, Jacopo Mondi wrote: > Define a list of supported mbus codes for the TXA and TXB CSI-2 > transmitters and implement the enum_mbus_code operation. > > The TXB transmitter only support YUV422 while the TXA one supports > multiple formats as reported by the chip's manual in section 9.7. > but the HDMI and AFE subdevices only provide RGB888 and YUV422, so only > list those ones here. > > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > drivers/media/i2c/adv748x/adv748x-csi2.c | 45 ++++++++++++++++++++++++ > 1 file changed, 45 insertions(+) > > diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c > index 5b265b722394..29b18b6c8b0e 100644 > --- a/drivers/media/i2c/adv748x/adv748x-csi2.c > +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c > @@ -14,6 +14,15 @@ > > #include "adv748x.h" > > +static const unsigned int adv748x_csi2_txa_fmts[] = { > + MEDIA_BUS_FMT_UYVY8_1X16, > + MEDIA_BUS_FMT_RGB888_1X24, > +}; > + > +static const unsigned int adv748x_csi2_txb_fmts[] = { > + MEDIA_BUS_FMT_UYVY8_1X16, > +}; > + > int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx, unsigned int vc) > { > return tx_write(tx, ADV748X_CSI_VC_REF, vc << ADV748X_CSI_VC_REF_SHIFT); > @@ -139,6 +148,41 @@ static const struct v4l2_subdev_video_ops adv748x_csi2_video_ops = { > * But we must support setting the pad formats for format propagation. > */ > > +static int adv748x_csi2_enum_mbus_code(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *sd_state, > + struct v4l2_subdev_mbus_code_enum *code) > +{ > + struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); > + const unsigned int *codes = is_txa(tx) ? > + adv748x_csi2_txa_fmts : > + adv748x_csi2_txb_fmts; > + size_t num_fmts = is_txa(tx) ? ARRAY_SIZE(adv748x_csi2_txa_fmts) > + : ARRAY_SIZE(adv748x_csi2_txb_fmts); > + > + /* > + * The format available on the source pad is the one applied on the sink > + * pad. > + */ > + if (code->pad == ADV748X_CSI2_SOURCE) { > + struct v4l2_mbus_framefmt *fmt; > + > + if (code->index) > + return -EINVAL; > + > + fmt = v4l2_subdev_state_get_format(sd_state, ADV748X_CSI2_SINK); > + code->code = fmt->code; > + > + return 0; > + } > + > + if (code->index >= num_fmts) > + return -EINVAL; > + > + code->code = codes[code->index]; > + > + return 0; > +} > + > static struct v4l2_mbus_framefmt * > adv748x_csi2_get_pad_format(struct v4l2_subdev *sd, > struct v4l2_subdev_state *sd_state, > @@ -228,6 +272,7 @@ static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad > } > > static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = { > + .enum_mbus_code = adv748x_csi2_enum_mbus_code, > .get_fmt = adv748x_csi2_get_format, > .set_fmt = adv748x_csi2_set_format, > .get_mbus_config = adv748x_csi2_get_mbus_config,
Hi Jacopo, Thanks for your patch. On 2024-05-09 18:13:55 +0200, Jacopo Mondi wrote: > Define a list of supported mbus codes for the TXA and TXB CSI-2 > transmitters and implement the enum_mbus_code operation. > > The TXB transmitter only support YUV422 while the TXA one supports > multiple formats as reported by the chip's manual in section 9.7. > but the HDMI and AFE subdevices only provide RGB888 and YUV422, so only > list those ones here. > > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > --- > drivers/media/i2c/adv748x/adv748x-csi2.c | 45 ++++++++++++++++++++++++ > 1 file changed, 45 insertions(+) > > diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c > index 5b265b722394..29b18b6c8b0e 100644 > --- a/drivers/media/i2c/adv748x/adv748x-csi2.c > +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c > @@ -14,6 +14,15 @@ > > #include "adv748x.h" > > +static const unsigned int adv748x_csi2_txa_fmts[] = { > + MEDIA_BUS_FMT_UYVY8_1X16, > + MEDIA_BUS_FMT_RGB888_1X24, > +}; > + > +static const unsigned int adv748x_csi2_txb_fmts[] = { > + MEDIA_BUS_FMT_UYVY8_1X16, > +}; > + > int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx, unsigned int vc) > { > return tx_write(tx, ADV748X_CSI_VC_REF, vc << ADV748X_CSI_VC_REF_SHIFT); > @@ -139,6 +148,41 @@ static const struct v4l2_subdev_video_ops adv748x_csi2_video_ops = { > * But we must support setting the pad formats for format propagation. > */ > > +static int adv748x_csi2_enum_mbus_code(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *sd_state, > + struct v4l2_subdev_mbus_code_enum *code) > +{ > + struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); > + const unsigned int *codes = is_txa(tx) ? > + adv748x_csi2_txa_fmts : > + adv748x_csi2_txb_fmts; > + size_t num_fmts = is_txa(tx) ? ARRAY_SIZE(adv748x_csi2_txa_fmts) > + : ARRAY_SIZE(adv748x_csi2_txb_fmts); > + > + /* > + * The format available on the source pad is the one applied on the sink > + * pad. > + */ > + if (code->pad == ADV748X_CSI2_SOURCE) { > + struct v4l2_mbus_framefmt *fmt; > + > + if (code->index) > + return -EINVAL; > + > + fmt = v4l2_subdev_state_get_format(sd_state, ADV748X_CSI2_SINK); > + code->code = fmt->code; > + > + return 0; > + } > + > + if (code->index >= num_fmts) > + return -EINVAL; > + > + code->code = codes[code->index]; > + > + return 0; > +} > + > static struct v4l2_mbus_framefmt * > adv748x_csi2_get_pad_format(struct v4l2_subdev *sd, > struct v4l2_subdev_state *sd_state, > @@ -228,6 +272,7 @@ static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad > } > > static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = { > + .enum_mbus_code = adv748x_csi2_enum_mbus_code, > .get_fmt = adv748x_csi2_get_format, > .set_fmt = adv748x_csi2_set_format, > .get_mbus_config = adv748x_csi2_get_mbus_config, > -- > 2.44.0 >
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c index 5b265b722394..29b18b6c8b0e 100644 --- a/drivers/media/i2c/adv748x/adv748x-csi2.c +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c @@ -14,6 +14,15 @@ #include "adv748x.h" +static const unsigned int adv748x_csi2_txa_fmts[] = { + MEDIA_BUS_FMT_UYVY8_1X16, + MEDIA_BUS_FMT_RGB888_1X24, +}; + +static const unsigned int adv748x_csi2_txb_fmts[] = { + MEDIA_BUS_FMT_UYVY8_1X16, +}; + int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx, unsigned int vc) { return tx_write(tx, ADV748X_CSI_VC_REF, vc << ADV748X_CSI_VC_REF_SHIFT); @@ -139,6 +148,41 @@ static const struct v4l2_subdev_video_ops adv748x_csi2_video_ops = { * But we must support setting the pad formats for format propagation. */ +static int adv748x_csi2_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); + const unsigned int *codes = is_txa(tx) ? + adv748x_csi2_txa_fmts : + adv748x_csi2_txb_fmts; + size_t num_fmts = is_txa(tx) ? ARRAY_SIZE(adv748x_csi2_txa_fmts) + : ARRAY_SIZE(adv748x_csi2_txb_fmts); + + /* + * The format available on the source pad is the one applied on the sink + * pad. + */ + if (code->pad == ADV748X_CSI2_SOURCE) { + struct v4l2_mbus_framefmt *fmt; + + if (code->index) + return -EINVAL; + + fmt = v4l2_subdev_state_get_format(sd_state, ADV748X_CSI2_SINK); + code->code = fmt->code; + + return 0; + } + + if (code->index >= num_fmts) + return -EINVAL; + + code->code = codes[code->index]; + + return 0; +} + static struct v4l2_mbus_framefmt * adv748x_csi2_get_pad_format(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, @@ -228,6 +272,7 @@ static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad } static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = { + .enum_mbus_code = adv748x_csi2_enum_mbus_code, .get_fmt = adv748x_csi2_get_format, .set_fmt = adv748x_csi2_set_format, .get_mbus_config = adv748x_csi2_get_mbus_config,
Define a list of supported mbus codes for the TXA and TXB CSI-2 transmitters and implement the enum_mbus_code operation. The TXB transmitter only support YUV422 while the TXA one supports multiple formats as reported by the chip's manual in section 9.7. but the HDMI and AFE subdevices only provide RGB888 and YUV422, so only list those ones here. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> --- drivers/media/i2c/adv748x/adv748x-csi2.c | 45 ++++++++++++++++++++++++ 1 file changed, 45 insertions(+)